The Universal Engine Bay LED Kit adds LED lighting to the engine bay on your vehicle. The following installation guide will provide you with step-by-step instructions on how to install the Universal Engine Bay LED Kit. Check out our installation video, or continue reading for step-by-step instructions below!
Table of Contents
Installation Tools
- 12mm wrench
- Trim Removal Tool
Installation Video
Wiring Diagram
Mounting Instructions
Step 1 - Mounting LED Strips
Locate where to mount your LED Strips. Be sure that the surface is clean before mounting. Mount the LED strips using the 3M adhesive backing. You can also use the included zip ties for mounting if possible.
Step 2 - Mounting Switch
Using a 12mm wrench remove the nut and washer from the bottom of the switch. Insert the switch "A" into one of the existing holes along the outer edge of the engine bay where the hood makes contact.
Note: The height of the switch may need to be adjusted to ensure that the hood makes very minor contact with the push button. Twist the nut on the switch to adjust the height.
Step 3 - Secure the Switch
Secure the switch in place by fastening the nut back onto the bottom of the switch. Plug the pink spade connector onto the bottom of the switch.
Step 4 - Connecting LED Strips to Harness
Plug the DC connector "B" into the included DC-to-DT adapter wire. Then plug the DT connector into your RGBW controller. Plug the M8 connector on each strip into the controller.
Connect the red power wire to the positive terminal on the battery.
Troubleshooting
Adust the door pin to switch "A" to ensure there is a proper ground connection.
Questions About the Installation?
If you have any questions or issues installing the RGBW Multicolor Engine Bay Kit, please contact us for further information.
Where Can I Buy an RGBW Multicolor Engine Bay Kit?
If you're ready to upgrade your vehicle with an RGBW Multicolor Engine Bay Kit, you can purchase one by clicking here or using our dealer locator to find a dealer near you.
Want to know more about Diode Dynamics products? Visit DiodeDynamics.com and subscribe to our newsletter for new product releases and more!
This Installation Guide is for the following SKUs: DD0440, DD0444
Share This Post