Backup LEDs for 2015-2016 Chevrolet Colorado (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships today if ordered in the next 7 minutes!

Upgrade to LED!
  • HP5 (92 lumens)
  • HP36 (210 lumens)
  • XP50 (410 lumens)
Add to Wishlist

Backup LEDs for 2015-2016 Chevrolet Colorado (pair)

More Views

  • 2015 Chevrolet Colorado Backup Light Collage
  • 2015 Chevrolet Colorado with 921 HP36 Cool White Backup Lights
  • 2015 Chevrolet Colorado with 921 XP50 Cool White Backup Lights
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)


HP5: Four high-power SMDs, under a diffusing lens. Just like the HP3, but run at higher power, with integrated copper plating for superior heat dissipation, allowing maximum brightness.

HP36: Full 360 degree illumination with 36 High-Power Samsung LEDs. Aluminum base for optimum heatsinking, and non-polar design for easy installation.

XP50: Each of the four sides of this bulb contains two 5W-rated chips, and the top is fitted with two more under a projector lens. Housed in an aluminum casing with textured finish for maximum heatsinking properties.

Fitment. All three bulbs use a quality inject-molded 921 terminal, with a sturdy base connector and proper pin alignment, designed for exact replacement of your factory 921 bulb. You will not need resistors for backup lights. Just replace the factory bulb.

Included in your order is TWO BULBS.


These LEDs illuminate in a crisp, cool, bright, white hue for maximum light output.


Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: 

HP5: Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on/off of LED technology.
HP36: Slightly higher brightness than OEM bulbs.
XP50: Much brighter than OEM bulbs. These are bright!

Lumens. BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.



LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size 921, also known as 904 904NA 906 906NA 912 916 916NA 917 920 922
Year 2015,2016
Make Chevrolet
Model Colorado
Application LED Bulbs
  1. Backup LEDs for 2015 Chevy Colorado - HP36 Review by LilBear

    Much brighter than the original halogen lights. Really lights up the area behind me. I think people know I intend to backup when these lights come on. (Posted on 6/25/17)

  2. Awesome lights Review by TImothy

    Lights are perfect. Make the truck look a lot nicer. Would definitely recommend buying. (Posted on 2/24/17)

  3. Excellent Quality, Good Output Review by JL

    Replaced the stock reverse lights on my 2015 Colorado with the HP36. The cool white colour is the most noticeable difference, but the visibility w/ the rear view camera seems comparable to stock. (Posted on 12/23/16)

  4. Great Bulbs Review by Colin

    After trying 2 sets from a local vendor I broke down and ordered the XP50 bulbs from Diode Dynamics. I will say 100% that the bulbs are much brighter than the local bulbs I bought and the fit is so much better as well. With the old local bulbs I bought if I went over a bump the bulb would stop working. Not these. Hopefully in the near future I will be ordering more bulbs to replace the factor bulbs in my 2016 Colorado. (Posted on 12/12/16)

  5. Great LEDs Review by Trae

    Very easy to install and very glad I purchased these LEDs. Can't believe I waited so long to get them well worth it. (Posted on 12/10/16)

  6. Simple install Review by Ray g

    Very easy install,quality as advertised (Posted on 11/24/16)

  7. Easy Install.. Review by Ed

    These were very easy to install! Took longer to remove the taillight assy's than it took to change out the bulbs. Excellent product. (Posted on 9/7/16)

  8. Nice and bright Review by Brad

    Good investment for your pickup. Lasts up to 40000 hours and less draw on your battery overall. Superior light output with crisp clear appearance. Recommended (Posted on 8/27/16)

  9. Bright Review by Tracy

    Great product easy to install and bright!!! (Posted on 8/26/16)

  10. way better than stock Review by chris

    awesome buy, can see in reverse even better.. lights up for the backup camera very well too (Posted on 7/17/16)

  11. Well Worth the purchase Review by MDJ

    Replaced my stock bulbs with HP36 bulbs. The light out put is great and the color is perfect (6000K). I am happy that I made the switch. At first they don't appear to be as bright as the stock bulbs but ultimately more is lit up without the heavy light concentration. (Posted on 7/5/16)

  12. XP50 Review by Trail Boss

    These are awesome bulbs. They are so bright. Very easy install. (Posted on 5/29/16)

  13. 2016 GMC Canyon Review by Joseph

    Product looks great and works great also. Fits 2016 GMC Canyons. Very nice improvement for the backup camera. (Posted on 2/4/16)

  14. great lighting Review by Kevin

    Went with the HP5, perfect light, clean and not overly bright. didn't drown out the back up camera and adds a clean look to the rear end (Posted on 12/15/15)

  15. Great LEDs for Backing Up Review by Douglas

    Very easy install and provide a lot of light while backing up. (Posted on 8/7/15)

Backup LEDs are a direct replacement. Just change the bulb! You will not need any resistors or other accessories.

Remove your factory bulb

  1. 1. Access the bulb or tail light. You may need to pull back the trunk/cargo carpet and/or unscrew the visible nuts holding the light in.
  2. 2. Remove the backup bulb socket by twisting counterclockwise.
  3. 3. Remove the factory bulb from the socket.


Install your new LED bulb

  1. 1. Plug new LED bulb into socket by pushing it in fully.
  2. 2. Test the function of the bulb. If it does not work, remove it, rotate, and reinstall in the socket.
  3. 3. Insert socket back into place, and reassemble as necessary. That's it!

Worry-free warranty

  • -Full 3-year warranty on all products
  • -No waiting: we usually send new items out with a return label (US customers only)


You will get quick help from our trained staff for any issues.

All Stage Series products carry a limited 8-year warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 3-5 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured


International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:


30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.


Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.


Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.


To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!