Fog Light LEDs for 2010-2013 Chevy Camaro RS (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships today if ordered in the next 9 hours and 56 minutes!

  • Cool White (6000K)
  • HP48 (280 lumens)
Add to Wishlist

Fog Light LEDs for 2010-2013 Chevy Camaro RS (pair)

Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)


Fog Light LED bulbs are an excellent way to improve the appearance of your vehicle. From the factory, most vehicles come with halogen bulbs, which project in a yellowish light. By replacing them with LEDs, you can create a modern appearance with the cool white light of LEDs.

The installation is 100% plug-and-play, just replace your factory bulb!

Please note: Fog Light LEDs are primarily for cosmetic upgrade and do not provide a significant increase in light output.


HP48: This bulb is designed with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.

Fitment. All three bulbs use a quality inject-molded P13W terminal, with a full-size base connector and proper pin alignment, designed for exact replacement of your factory P13W bulb.

Included in your order is TWO BULBS.


These LEDs illuminate in a crisp, bright, cool white hue.


Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb:

HP48: 265 lumens. Slightly lower brightness than factory.

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.



LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size P13W
Year 2010,2011,2012,2013
Make Chevrolet
Model Camaro RS
Application LED Bulbs
  1. Great Product Review by Grrrowl

    I received these lights today and took me 5mins on each light to install and all I can say is WOW! they are bright and are good quality and they fit my Camaro perfectly! I would highly recommend these light or any light that Dioded Dynamics has to offer. If I need anything else i will buy from them with confidences again. (Posted on 10/20/16)

  2. Much better than yellow fogs Review by RedKnight

    Loved the packaging and the look of these fog lights. They seem to be very well built and the fit perfectly. No problems. I have only had them installed about a week but i have no complaints. Very bright even for being 280 Lumens. (Posted on 9/22/16)

  3. Make the Car look Great Review by Camaro TX to TN

    New subtle addition to my car make it look great. Love these lights. Install wasn't "easy" per-say but, once I did one, installing the other was a piece of cake. Have to turn your wheels just right to get into the wheel well. Recommend these to pair with new headlight bulbs! (Posted on 7/18/16)

  4. Great Product Review by Bill

    I would like to thank you for the fast service and shipping of my order. It was packaged very good and in it's own display box. Installed in my Camaro very easy and are very bright. Love them ! (Posted on 6/7/16)

  5. Fantastic Quality !! Review by Nick P

    I received my fog light led's today and I gotta tell ya, right out of the box I knew they were a quality product. The packaging was phenomenal. I too bought from another business and was very disappointed (their packaging was two bulbs in a clear plastic bag and one of the bulbs came apart during shipping) It took me about 10 minutes to install these bulbs. When these bulbs lit up for the first time, they were bright and gave my 2013 Camaro RS a whole new look. I'm glad I found Diode Dynamics and will highly recommend them. (Posted on 4/22/16)

  6. Impeccable Quality Review by Richard

    I had made the mistake of ordering LEDs from another seller, and did not see the word "equivalent" in the product description. They were junk! Ordered a set from Diode Dynamics, and I couldn't believe the difference in quality that you can see with them still in the package! These are quality and workmanship that you want and deserve! (Posted on 2/17/16)

  7. Daytime running lights 2013 RS Camaro Review by Brad

    Read a lot of reviews on Amazon trying to find the right LED bulbs for 2013 RS Camaro. Every bulb seemed to have a problem or fail after a week or so. Finally found Diode Dynamics and gave them a call. GLAD I DID! Customer service was awesome and got exactly the right bulbs. Been in for about a month now and no problems.
    The fit is great but installing them is a 2 man job. Need someone to remove the 3 screws in the front fender liner , pull it back and hold it, and shine a flashlight on the bulbs. Then while your friend is holding the fender liner out of the way, you can reach in and change out the bulbs. (Posted on 1/31/16)

  8. Love my DRLs now! Review by RS Camaro DRLs

    Love the look of my DRLs now! They match either my halos or when lights are on vs the traditional bulbs. Plus I like the fact of the 3 year warranty vs other brands which is why I went with Diode Dynamics. (Posted on 8/29/15)

  9. really changes how the car looks Review by unssafe

    i have a ZL1 and it takes the psx bulb but they only had the ps13 in stock, no problem. all there is to making them fit is trimming one little tab off the bulb base and it fit very snug in the housing and matches the halos and hids perfect. (Posted on 8/11/15)

  10. Excellent product Review by JD

    Should have bought these sooner. What a difference they make. Very easy install. Highly recommend these!! (Posted on 7/30/14)

  11. good product Review by kelsey

    good product and fast delivery, tried other fog light bulbs that didn't work, this product was perfect (Posted on 7/7/14)

This product is a direct replacement. Install as follows:

Remove your factory bulb

  1. 1. Unplug factory connector.
  2. 2. Twist bulb counterclockwise and remove from socket.


Install your new LED bulb

  1. 1. Plug LED bulb into factory connector. 
  2. 2. Insert bulb into socket, and twist clockwise to lock in place. That's it!

Worry-free warranty

  • - Full 3-year warranty on all products
  • - No waiting: we usually send new items out with a return label (US customers only)


You will get quick help from our trained staff for any issues.

All Off-Road Lighting also carry a limited lifetime warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Just $5 per order with our Diode Delivers program
  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 2-4 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured


International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:


30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.


Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.


Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.


To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!