TALK TO A LIGHTING EXPERT314-205-3033M-F 9-5 CST

License Plate LEDs for 2009-2016 Hyundai Genesis Sedan (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships today if ordered in the next 4 hours and 34 minutes!

$10.00
  • Red
  • Cool White (6000K)
  • Warm White
  • Blue
  • Green
  • Amber
  • SMF2 (16 lumens)
  • SMF4 (56 lumens)
 
Add to Wishlist

SMF4

More Views

  • SMF4
  • SMF2
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)

FUNCTION

License plate bulbs are used to illuminate the rear license plate on your vehicle. From the factory, the bulbs are incandescant, lighting up in a yellowish color.

Newer luxury cars use LED modules to illuminate the license plate with modern, cool white light. By changing your license plate bulbs to LED, you can easily add this luxury look to your vehicle! 

The installation is 100% plug-and-play, just replace your factory bulb.

 With low price and easy install, this is one of the best, easiest modifications you can do to improve how your car looks at night.

 

BULB DESIGN

SMF2: Compact design, with two 5050-size Epistar SMD chips on a standard festoon base. Directional output. Direct replacement, plug-and-play.

SMF4: Similarly compact design, with four 5050-size Epistar SMD chips, for maximum effective brightness. Standard festoon base. Directional output. Direct replacement, plug-and-play.

Included in your order is TWO BULBS.


COLOR

These LEDs are available in crisp, bright colors including White, Warm White, Blue, Red, Amber, and Green.

 We strongly recommend white or warm white for license plate applications- the other colors are illegal in most areas. Please check your local laws before ordering.

Color Reference Banner


BRIGHTNESS

Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb:

SMF2: Slightly lower brightness than OEM bulbs, but still provides the crisp, modern color of LED.
SMF4: Slightly higher brightness than OEM bulbs.

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.

 

QUALITY

LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size 36mm Festoon, also known as 3423 3425 6411 6418 6423 6461
Year 2009,2010,2011,2012,2013,2014,2015,2016
Make Hyundai
Model Genesis Sedan
Application LED Bulbs
  1. 2012 GENESIS License LED Review by -dennigros-O
    Price
    Value
    Quality

    I do like the bright display from these.....one of originals burned out, so replaced both and a significant improvement. Shipped promptly. which is always appreciated. (Posted on 11/7/15)

  2. VERY BRIGHT / AWESOME LOOK Review by ED 718
    Price
    Value
    Quality

    These LEDS are exactly what I needed they give the car a more premium look. This is how the car SHOULD have come from the factory. Had a bit of a hard time in getting the LEDS in the socket because of my large hands but that's Hyundai's fault not Diode's......Very satisfied with product (Posted on 8/6/14)

  3. License Plate LED for 2010 Hyundai Genesis Sedan Review by ldew01
    Quality
    Price
    Value

    The LED's are much brighter and give a more sophisticated look to the vehicle. I will be ordering more lights. (Posted on 12/16/13)

  4. STAGE 1 LICENSE PLATE LED Review by 2011 GENESIS4.6
    Price
    Value
    Quality

    THE STAGE 1 LIGHTS ARE BRIGHTER THAN THE FACTORY LIGHTS. THEY LOOK GREAT. I'VE OWNED THE CAR FOR ALMOST 3 YEARS AND ONE OEM LIGHT WENT OUT SO I DECIDED TO GIVE THESE LED'S A TRY. THEY LOOK BETTER AND SHOULD LAST A WHILE. EASY TO INSTALL. I'M SURE I WILL BE REPLACING OTHER LIGHTS ON MY CAR WITH LED LIGHT FROM DIODE DYNAMICS. (Posted on 7/28/13)

  5. License plate LEDs 2013 Hyundai Genesis Review by Ken and jetech00001 on KIA forum
    Value
    Quality
    Price

    i bought the stage 2 plate LEDs and they look great and great customer service received them 2 days after ordering and make sure you read the instructions on the polarity it will save a phone call . i will be ordering more for the Genesis and my Ram truck (Posted on 5/9/13)

Installation

Level of Difficulty: 1/10

Just unplug your factory bulb, and replace it with the new LED one. It is a direct replacement for your vehicle.

Accessing the bulb itself is quite easy. Usually, it is held in by two tabs, and you can pop it out from the outside of the vehicle. In some cases, you will need to remove a few screws, which are clearly visible. Finally, it may be held by clips from the inside, accessible when you open the hatch or trunk.

If it does not work the first time, try flipping it around in the socket, as all LEDs require the correct polarity.

Worry-free warranty

  • - Full 3-year warranty on all products
  • - No waiting: we usually send new items out with a return label (US customers only)

 

You will get quick help from our trained staff for any issues.

All Off-Road Lighting also carry a limited lifetime warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Just $5 per order with our Diode Delivers program
  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 2-4 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured

 

International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.


You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:

Returns

30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.

Exchanges

Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.

 

Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.

 

To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!