Angel Eyes can be installed on any vehicle as an accent for your headlights. They can be found on BMWs and are a nice modification for any vehicle. The angel eyes from Diode Dynamics are the highest quality and brightness available. Look around, you will not find better angel eyes anywhere for these great prices! Our rings were custom-designed for reliability and long life, and have been tested on your vehicle for perfect fitment.
These angel eyes have been test-fit on your vehicle for perfect fitment. To read more about Angel Eye Rings, click here.
RGB SMD Design
These are LED rings which use 5050 size SMDs. The SMD LED chips are mounted directly on to the circular board, facing forward. The LEDs go all the way around the ring, for no "break" in the light as with other angel eye designs. This provides an extremely high light output in the forward direction.
Typically, LED rings have resistors mounted directly on to the ring. Our RGB have improved durability and reliability by using external current regulators. The regulators are housed in a small, fully-potted (waterproof) regulator box, which is simply attached inline between the controller and the LED ring. RGB Multicolor rings have a standard 4-pin RGB connector, compatible with Diode Dynamics RGB controllers. Either controller can be used to control the rings. See below for a comparison video of the two controllers we offer.
These are LED rings that use COB technology, which stands for "Chip On Board." The LED chips are mounted directly on to the PCB board, so the whole board essentially becomes the LED package diffusing the light evenly from each chip. The effect is a uniform, bright light output in a full ring.
Our COB rings use an sturdy aluminum backing for superior heat dissipation and reliability. Watch out for poor-quality substitutes! Our newest COB rings do not have resistors mounted on each ring itself, but rather the power is supplied by a heavy-duty, fully waterproof and shockproof external regulator.
- Two (2) 5050-SMD Rings, fitted for your vehicle
- Diode Dynamics Plug-and-Play Wiring Harness
- Red LED Toggle switch
- 3-year limited replacement warranty
- 30-day satisfaction guarantee
Installation requires you to open the headlight, by using heat from either your oven or a heat gun. It sounds bad, but really isn't too hard. Simply remove all screws, heat the seal, and pull apart. We have installation videos and other helpful guides available at diodedynamics.com/install. The wiring is a plug-and-play installation, using our Diode Dynamics Angel Eye Harness and quick disconnects. You will not have to do any soldering, wire stripping, crimping or anything. The rings only need 12V power and ground- we recommend using your parking lights, in order to have them turn on like they came that way from the factory, "OEM style."
Don't want to do it yourself? Looking for a kit for a different model? We can do any vehicle for you, with our large inventory of ring sizes. Contact us for information.
Awesome Lights Review by mmoua
Price Value Quality
Great customer service!!! Diode dynamics was more than happy to help with any problems. Installation was a breeze. Lights look great and very bright at night time. (Posted on 1/23/16)
Great Review by ST22
Price Value Quality
I installed these within a week of picking up my car, and I don't regret it for a second. I usually leave them on purple to give a nice contrast to the grey of my car. I highly recommend them. (Posted on 5/22/14)
Gorgeous Review by Brian
Price Value Quality
These look amazing. I blacked out my headlight housings and mounted these at the same time. I used some black silicon rated to 500 degrees to mount them for now since the rings don't make enough surface contact to the lamp housing to just be glued. Other places recommend using a push pin to punch 3 or 4 sets of small holes and using ultra fine framing wire. I would have done this if I had any on hand, but the black silicon hid well against the newly blacked out housing.
Wiring was a breeze, but I found that the wire that taps to the positive cable of your headlights to trigger the relay could have been a bit longer. You can get away with the length provided, but it will be harder to hide the rest of the harness. I cut it and soldered on a new length of cable and everything fit together nicely.
For anyone wondering about the installation, you will only need to cut a small hole in the grommet behind the headlamp. No holes need to be drilled.
Also for anyone wondering how to get in there and install them yourself, baking each headlamp at 225 for 15 minutes will make the seal soft enough to pull apart. Then bake them again while already assembled to press the two halves back together. (Posted on 1/13/14)
Looks great Review by Jonathan
Quality Price Value
The angel eyes look great, I Actually received the multi color angel eyes and they are anything you could ask for literally any color. Multiple color effects such as flashing strobe etc... Great product if your looking to spice up your vehicles eyes. (Posted on 10/10/13)
- - Full 3-year warranty on all products
- - No waiting: we usually send new items out with a return label (US customers only)
You will get quick help from our trained staff for any issues.
All Off-Road Lighting also carry a limited lifetime warranty.
For further details, please see our full article.
Domestic (US) Customers
- - Just $5 per order with our Diode Delivers program
- - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
- - USPS, for delivery in 2-4 days (on average)
- - Express services are available, see exact pricing at checkout
- - Fully Insured
- - We ship to all countries via standard mail
- - Usually around $10 for LEDs, or $25 for HIDs.
- - Choose your service on checkout to see exact prices:
- - USPS 1st Class: 2-5 weeks
- - USPS Priority: 1-2 weeks
- - Express EMS: 1 week
- - Please email us if you are unsure about shipping to your country.
You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.
Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.
If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:
30 day return policy. All customers have 30 days from the date of original order shipment to return items.
Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!
Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.
Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.
Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.
Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.
To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.
Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.
Alternatively, you can also send us a message, or give us a call!