HitchMount LED Pod 7-Pin Reverse Kit

HitchMount LED Pod 7-Pin Reverse Kit

C1
$139.95
Skip to product information
HitchMount LED Pod 7-Pin Reverse Kit
Diode Dynamics

HitchMount LED Pod 7-Pin Reverse Kit

$139.95

Allows you to mount an SSC1 or C1R LED pod in any 2-inch or 2.5" trailer hitch receiver. Adds reverse light, 4th brake light, and additional running light. Simple 5-minute installation. Optional SafetyStrobe. Designed and assembled in USA.

Key Specs
Test
Brightness:1030 (Measured) Lumens Wattage:12.8 Voltage:9-16V Water Resistance:IP69K Waterproof High Pressure
Kit: C1
SKU: DD7420

3-in-1 Lighting Upgrade

Add a high-power reverse light, additional running light, and an optional 4th brake light with the C1R HitchMount!

Easy 5-Minute Install

The patent-pending snap-fit design allows you to install the HitchMount in minutes. No drilling or hitch pin required!

Brighter Backup

Need an upgrade? The HitchMount LED Pod is several times brighter than stock bulbs alone, allowing you to back up confidently at night.

Optional 4th Brake

Stand out on the road with the C1R's high-power 4th brake light and optional SafetyStrobe feature.

Easy Removal

Remove the HitchMount in minutes thanks to the snap-fit design! Perfect for those who use their trailer hitch often.

Features

  • Allows you to mount an SSC1 or C1R LED pod in any 2-inch or 2.5-inch trailer hitch receiver.
  • Adds a powerful reverse light, 4th brake light, and additional running light.
  • Simple 5-minute installation, with no need for custom wiring or routing wires.
  • Optional SafetyStrobe brake light strobing.
  • Designed and assembled in USA.

Overview

Add significantly more light output when backing up at night with our Stage Series HitchMount Reverse Light Kit! This kit allows you to mount one SSC1 or C1R LED pod in your 2-inch or 2.5-inch trailer hitch receiver, adding a high-power reverse light, additional running light, and an optional 4th brake light with the C1R option. With the included wiring harness, this kit connects to your vehicle's factory trailer hitch wiring for simple, everyday operation.

Brighter Backup. Factory reverse bulbs just don't provide enough light output to back up at night confidently. By pairing our patented TIR optics with high-powered LEDs, the SSC1 and C1R included in this kit provide an additional reverse light that's several times brighter than stock bulbs alone. And with a recent upgrade, the C1R LED Pod now delivers 68% more light output, providing even more output when backing up at night! Plus, it automatically comes on when the vehicle is put in reverse!

Additional Running Light. The Stage Series LED pod included with this kit features a distinctive red backlight that operates as an additional running light during use! The backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products.

SafetyStrobe 4th Brake Light. The C1R option features a high-power red function to serve as a powerful 4th brake light, along with the low-power running light. The high-power red functionality activates anytime you apply your brakes, adding a 4th brake light to your vehicle.

The C1R also features optional brake light strobing, which can be activated in 15-second intervals. By default, the C1R will flash three times when the brake lights are initially applied, for greater visibility. The SafetyStrobe feature can be easily disabled if desired.

Everyday Operation. This kit is completely plug-and-play with all 7-pin trailer connectors. The included harness plugs right into your factory trailer hitch wiring for easy installation and operation. The kit operates as an additional red running light with your tail lights, and then automatically switches to a high-power backup light when your vehicle is in reverse. The high-power 4th brake light feature included with the C1R will activate anytime you apply your brakes. If you would like to have override functionality to manually turn on the reverse light anytime, you will need to purchase the universal backup harness.

Some newer trucks feature advanced trailer safety systems that automatically detect when a trailer is connected. To ensure compatibility, each HitchMount kit includes an optional red wire that can tap into your tail light’s brake signal, preventing trailer warnings or dashboard alerts for hassle-free operation.

Simple Installation. The patent-pending snap-fit design allows you to install this mount in minutes, without any drilling or need for a hitch pin. Simply insert the HitchMount into your trailer hitch receiver and the snap-fit side mounts will snap into place. Installation couldn't be easier and takes less than five minutes!

This kit is ideal for anyone who uses their trailer hitch often since removal can be done in minutes as well! Simply unplug the harness, press the snap-fit pins and remove the mount. The included DT connector cover protects the harness from dirt and moisture when the HitchMount is not in use. When you're not using your hitch for towing, you can quickly reinstall the HitchMount and plug it back in.

If you would like to use a locking trailer pin to install this kit instead of the snap-fit pins, you can do so with a quick modification. Watch the video.

Focused. Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in our Stage Series pods collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: Total Internal Reflection (TIR) Optics | Stage Series Video.

From there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the Stage Series LED pods serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of our pods is much greater than other LED pods using basic optics or reflectors with a standard outer lens.

Functional Output. All Stage Series beam patterns were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.

Flood pattern was designed to provide uniform, even illumination with a full 50x50 degree spread of light on the SSC1 and C1R LED pod. Unlike generic "flood" lights that are simply a heavily diffused spotlight, our flood pattern uses pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout.

Proven Reliability. Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.

Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!

Product Specification

Backlight Color: Red
Beam Angle: 80°x50°
Brightness: 1030 (Measured) Lumens, 1080 (Measured) Lumens
Candela: 400, 480
Light Color Temperature: 6000K
Compliance Rating: SAE J575 Durability Test
Connector Type: Deutsch DT Input
Cooling Method: Passive, Pin-Fin heatsink
Electrical Polarity: Polarity Specific
Housing Material: Steel
Wattage: 12.8, 14.1
Water Resistance: IP69K Waterproof High Pressure
LED Driver: Constant Current
LED Emitter: Cree XP-L HI, Cree XP-L HI|Osram 1414 Pure
Lens Color: Clear
Lens Material: Polycarbonate
Light Beam Pattern: Flood
Light Color: Cool White
Material: Steel
Maximum Current Draw: Main Beam 1 / Backlight 0.024, 1.1
Nominal Voltage: 12.8V
Operating Temperature: -40C to 85C (-40F to 185F)
Voltage: 9-16V

In the box

In the Box:

  • One (1) SSC1 Sport or C1R HitchMount LED Pod
  • One (1) Snap-In 2.5in Receiver Adapter
  • One (1) 7-Pin trailer single output harness
  • Two (2) Zip ties
  • One (1) T-Tap (C1R Only)
  • Installation guide

Quantity:

One (1)

Installation
Warranty Details

Limited Lifetime Warranty

Diode Dynamics carries a Lifetime Limited Warranty on select products.

If you experience any defect with a product, we will diagnose the issue with you, and if necessary, provide a replacement. Click here to learn more.

Shipping

Domestic (U.S.) Shipping

All domestic (U.S.) orders ship with your choice of UPS or USPS, and all orders placed before 12 PM CST will ship the same day, if all items are in stock. Shipping costs are calculated at checkout, based on order size. Delivery usually takes just 3-5 days.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns. 

Have a question about your shipment? Just like any other question you might have, simply send us an email and our trained lighting and shipping experts will reply, usually the same day. Or, give us a call during normal business hours.

 

International Shipping

We ship to almost everywhere in the world using USPS shipping services, along with your country's postal service. Rates are calculated at checkout to ensure fair pricing. We normally offer standard mail, Priority International, and EMS Express. Please note that the shipping time can vary widely, based on your countries mail service and border policies. Please search your provided tracking number on the GlobalPost website to obtain your alternate/last-mile tracking number.

Shipments are marked with the value of your purchase price. International customers are responsible for any tariffs or customs fees that may be associated with their shipment. Please check your country's laws and regulations before your purchase.

 Puerto Rico: As we use standard USPS, PR is considered a US territory for mailing purposes, and can be selected as such at checkout. Shipping will be domestic U.S. rates.

 Canada: We ship to Canada every day! Most small orders will cost around $10 via standard mail. We also offer Priority and Express EMS. To see exact shipping rates, please view your options at checkout. We also offer UPS service to Canada.

 Europe, Asia, and Australia: We ship to all other countries using standard mail. You can check the shipping cost at checkout, as it will be calculated based on your cart. We offer standard mail, Priority, and EMS Express.

 

Customs Fees for International Shipping

Shipments are marked with the value of your purchase price. International customers are responsible for any tariffs or customs fees that may be associated with their shipment. Please check your country's laws and regulations before your purchase.

As we use only standard mail, our customers normally do not incur any type of import fees, customs fees, or tariffs for smaller shipments. However, this cannot be guaranteed, and any fees are the responsibility of the buyer. Please contact us if you have any concerns.

You may also like

Related Products