Diode Dynamics is pleased to offer the HYLUX HID Conversion Kit. After years of experience in the industry, we have assembled this kit, made up of the absolute best components on the market, to provide reliable operation at an OEM level of quality.
The ballasts are the most important component of an HID kit, as they provide the power. After years of providing midrange and even high-quality ballasts for vehicles of all makes and models, Diode Dynamics identified a company called HYLUXTEK as the very best manufacturer in the industry. Their newest ballast, the 2A88 slim, is simply the best aftermarket ballast on the market. You will see other high-end retailers carrying this same ballast, usually under their own brand name, for a much higher cost.
Controller Chip. Most digital (DSP) ballasts on the market still use generic chips, which are cheap, and work pretty well. However, when you need maximum quality, you need a new computer chip designed for one purpose. This is known as an Application-Specific Integrated Circuit (ASIC). These ballasts use brand new DSP ASIC chips for maximum efficiency and brightness, fast warmup time, and extremely stable operation. To prevent counterfeiting, HYLUX has even included a fully-sealed transparent window in the ballast, showing the ASIC inside.
CAN-BUS. Some vehicles have systems which sense the power consumption. Since HIDs use less power than factory halogen bulbs, this can cause issues. You can resolve this by adding capacitors, known as warning cancellers, or some ballasts come with them built-in. However, sometimes that's still not enough to trick the vehicle! To fix it, this ballast has an industry-leading CANBUS module, capable of smoothing PWM signals up to 100hz, and providing feedback to the vehicle to equalize the load, to defeat even the most troublesome modern CANBUS systems. Even if your vehicle does not use a CAN-BUS system, these modules will provide extra power smoothing for reliable operation. Simply put, this ballast will work on any vehicle, the first time you plug it in. With this kit, you don't need to worry about capacitors, warning cancellers, or resistors.
Igniter and Startup. You may have heard of ignition issues with other ballasts, caused by an igniter that is too small to withstand cold temperatures. No reason to worry with these ballasts- the oversized 24kV external igniter means that you will never have an ignition issue, even in the coldest temperatures. Additionally, the ASIC chip in these ballasts means that you only need 4 amps at nominal voltage to start up. These ballasts consume less power than any other on the market, meaning 100% reliable and fast startups, every time.
Case. These ballasts are the smallest you will find, about the size of a pack of playing cards. The case is fully potted, or filled with epoxy, which makes them fully waterproof and shockproof. This material is expensive, so most ballasts on the market are only given a coating, or partial fill. HYLUX ballasts are completely filled to the top, sparing no expense to ensure longevity. If you take off the back cover on this ballast, you'll see what we mean!
The bulbs included with Diode Dynamics kits are CNLight bulbs, which are widely regarded as the most dependable aftermarket bulbs on the market. Just like the HYLUX ballasts, you will see other companies offering these same bulbs under their own brand name. They provide superior life, brightness, and color attenuation when compared to generic HID bulbs, like those found in most cheaper kits on the market. With these bulbs you won't have any issue with bulbs not matching in color, or flickering, which is common in cheaper bulbs. The one-piece base design prevents any issues with separation over time, making the entire bulb extremely reliable.
You may choose to include a heavy-duty relay, to power your HIDs directly from the battery, instead of the factory wiring. This relay has been designed from scratch, and utilizes a fully-sealed, waterproof relay, with flyback diode, and even has a built-in capacitor for input power smoothing. All wires are sleeved with braided techflex for an attractive appearance and extra protection. The input wires are each a meter long, and the output wires are one meter and two meters, which means the wiring will be long enough for even the biggest vehicles. The single-ground design makes installation easy. This relay was designed with reliability, convenience, and long-life in mind.
A relay wiring harness is not required for operation of the HIDs in most vehicles, however, please be aware that some vehicles do require it for operation. If you're not sure, just include it with your order, and you can always return it for a full refund if you don't need it!
The CNLight bulb temperatures are rated accurately in correlated color temperature at 35 watts, and have an industry-standard 3000 hours of estimated bulb life. Please be aware that most HID bulbs are rated inaccurately from other manufacturers. 8000K is not dark blue, and 6000K is not pure white! We provide accurately-measured colors with a range of options to suit your taste.
3000K is our lowest temperature, and has a pure yellow output, which is great for use in fog lights.
4300K is a natural white output, as seen on vehicles with factory HIDs. It will not have any blue tint to its color, and might appear slightly warm.
5000K is a pure white output, without any warm hint, and no blue either. It may not be available in your specific bulb size, in which case it will not be shown as an option.
6000K is our most popular color, which produces an ice white color. It has a very slight hint of blue, and matches best with most LEDs.
8000K is our highest temperature, which produces an ice blue color. This is not a strong blue color though- it is still primarily white, meaning there will be no decrease in light output.
Our warranty is through Diode Dynamics, LLC, so you can be assured that you will get fast and friendly service should you have any problems. There is a full-replacement 3-year warranty on all HID Kit components, including HID Bulbs, Ballasts and Relay.
We carry our own inventory, so no waiting for them to be shipped from overseas, or waiting on big, unreliable suppliers to ship them. They ship right from our own inventory, in St. Louis, Missouri, usually the same day you order.
Kit comes with:
- One pair CNLight HID bulbs in your choice of bulb size and color
- Two 35w super-slim ballasts (HYLUX 2A88 Slim CANBUS)
- One Premium Waterproof Relay (optional)
- Mounting hardware for ballasts (3M mounting pads)
- Three-year replacement warranty
- Free Diode Dynamics decal
- Diode Dynamics 30-day satisfaction guarantee
Best upgrade for veloster Review by StateNME
Value Quality Price
My 2012 veloster came with standard lights and has the worst headlights of any past owned vehicle. I tried multiple LED kits to convert but none of them actually fit as claimed. HID is your solution. They were easy to install and came with EVERYTHING YOU NEED TO MOUNT. Now I feel like i ak driving around with two white dwarf stars powering the way. It is literally a night and day change from factory! Thank you for this amazing kit!!! (Posted on 7/1/16)
Best upgrade for veloster Review by I can see clearly now
Value Quality Price
My 2012 veloster came with standard lights and has the worst headlights of any past owned vehicle. I tried multiple LED kits to conert but none of them actually fit as claimed. HID is your solution. They were easy to install and came with EVERYTHING YOU NEED TO MOUNT. Now I feel like i ak driving around with two white dwarf stars powering the way. It is literally a night and day change from factory! Thank you for this amazing kit!!! (Posted on 7/1/16)
Completely awesome! Review by Alex W
Price Value Quality
The install was incredibly easy, self explanatory. The biggest pain in the butt was the removal of the bumper, everything else went like butter.
The guys at Diode Dynamics are awesome, I got my kit within 3 days of ordering it, it shipped 6 hours after my order - I'm very impressed.
The components are good quality, and everything you need is there. Looks amazing, I will be uploading a picture as soon as I'm able to.
I did get the relay, as well as installing a capacitor from Radio Shack ($1.50) running through the relay to ensure no problems of buzzing or flickering in the future.
Thank you DD! (Posted on 1/14/14)
Best looking kit, easiest conversion! Review by Serkan
Price Value Quality
This was one of the easiest and most amazing looking upgrade I have done. The kit comes with every tool and information you need. All you have to do is just spend some time in the garage and have the best looking HID lights. I like this company a lot. They even have video tutorials for everything. It just doesn't get any better. (Posted on 11/23/13)
Great value for low price! Review by Lou
Price Value Quality
I did remove the bumper cover, it just makes so much easier to run wires. Installed the hids with the relay kit and worked out great. Like my title says great value for low price! I highly recommend getting your hids from DD they have great customer service and will take care of you right away. (Posted on 1/26/13)
Very nice and high tech. Review by Jan Marcos
Value Quality Price
I first tried installing without removing bumper but it's hard so I removed partially the bumper to get the headlight loose. I Installed it first time and it worked but then when I tried it again it didn't work. I got replacement ballast for free and tried it again but didn't work. It was embarrasing but the grounded wire was in wrong location so after I got that fixed with everything nicely tucked and installed easy the lights turned on beautiful. They are bright white-blue reflection with nice cutoff line and when you look at the headlight itself its white. Couldn't ask for better. (Posted on 1/14/13)
WOW Review by Matthew Fickett
Quality Price Value
Purchased my HID kit from DD because they were the ones with good reviews. Everything was so easy from purchasing my kit, troubleshooting over the phone if I had a quick question, to install. I would recommend this kit to anyone and If your going to purchase a kit online. Get the wiring harness with the relay/bulb adapters! Its a must. The only problem that I had with my kit that others my not of got was a buzzing from the relay and the lights not functioning properly. To fix this I bought a 470uf capacitor from radio shack and installed it in the relay and everything worked perfectly. Other then that, good quality and like I said before, everything was perfect. (Posted on 11/6/12)
Easy to install, great look, super bright. Review by Luis
Quality Price Value
Just put a set of these on my Veloster was very easy, I would recommend getting the wire hareness and adapters, makes the install really easy, was able to do it without taking off the bumper, just removed the bolts holding the light assembly, and tipped the lights up slightly, did the install in about an hour and half including tucking wires, the harness makes a huge difference, this is the kit to get if your adding HIDs to your Veloster. (Posted on 9/2/12)
Looks Awesome Review by Rooster Man
Quality Price Value
Very easy to install, once you remove the bumper. I ordered the harness and relay, a MUST, but i needed to add a 470uF capacitor to stop the relay from buzzing. Otherwise, it looks Amazing and VERY bright. I don't need the high beams to see. (Posted on 8/1/12)
Had to put HIDs Review by Ralf
Quality Price Value
Had to put HIDs since my car didn't come with ones from factory, amazing Light perfect fit (Posted on 6/22/12)
The headlights the V should have had from the factory. Review by Blake
Quality Price Value
Stock V was heavily under powered in the lighting arena. For such an advanced car it left a lot to be desired. This kit WILL fix that. Car is now bright and gets much more attention at night (unlock the car and HID's pop on) then it did before. (I bet you're thinking "More attention??" I know right?) The beam pattern is perfect with the HID's installed and does not need to be adjusted. The install was a breeze. I would recommend replacing the fogs at the same time so you don't have to take the bumper off so many times. I went with the 6000k and as you can see from the picture above (it's my actual car) they look phenomenal. MAKE SURE you get the relay and the H7 bulb adapters. The car thinks the headlights are out and pulses power so they flicker without the relays. The Adapters make it so you don't have to modify the stock plugs, so it's easy to go back to stock if you need to. So, In summary, I would have to say from my experience with these.... You need them. It's not an option of "do I want them" or not, but you need them.
Think of your safety.
Think of the children.
Think Diode Dynamics. (Posted on 3/3/12)
The installation of HIDs consists of three main steps, which are the same for every vehicle. The process is quite straightforward:
- -Remove factory bulbs and replace with HID bulbs
- -Connect ballast to bulb plugs
- -Mount ballast and clean up wiring
The following video shows installation on a Scion FR-S, which is very comparable to installation for most vehicles. The only tedious part for some vehicles will be accessing the bulb itself. Please check your manual, as some vehicles require the removal of the front bumper cover. Still, the installation should only take 60-90 minutes.
- -Full 3-year warranty on all products
- -No waiting: we usually send new items out with a return label (US customers only)
You will get quick help from our trained staff for any issues.
All Stage Series products carry a limited 8-year warranty.
For further details, please see our full article.
Domestic (US) Customers
- - Just $5 per order with our Diode Delivers program
- - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
- - USPS, for delivery in 2-4 days (on average)
- - Express services are available, see exact pricing at checkout
- - Fully Insured
- - We ship to all countries via standard mail
- - Usually around $10 for LEDs, or $25 for HIDs.
- - Choose your service on checkout to see exact prices:
- - USPS 1st Class: 2-5 weeks
- - USPS Priority: 1-2 weeks
- - Express EMS: 1 week
- - Please email us if you are unsure about shipping to your country.
You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.
Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.
If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:
30 day return policy. All customers have 30 days from the date of original order shipment to return items.
Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!
Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.
Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.
Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.
Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.
To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.
Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.
Alternatively, you can also send us a message, or give us a call!