2014-2016 Toyota 4Runner Tail as Turn™ Module +Backup Module (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

As low as: $40.00

Price as configured: $0.00

1 x Tail as Turn Module, 4Runner   +$40.00 * In stock
Add to Wishlist

2014-2016 Toyota 4Runner Tail as Turn™ Module +Backup Module (pair)

More Views

Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)

NOTICE: Compatible with USDM models only / 3M Adhessive tape not included

This kit will make your LED tail light also function as the turn signal on your 2014-2016 Toyota 4Runner. By eliminating the factory incandescent turn signal bulb, and instead operating it through your LED tail light, you will gain a much more modern appearance.

Using OEM plug-and-play tail light connectors, the base kit is 100% plug-and-play, with no wiring required.

This product was designed and fully manufactured by Diode Dynamics, in St. Louis, Missouri. It is fully made in USA.

Please note: For ease of installation, our resistor kit will be integrated into each module. This means you will not have to tap any factory wiring to eliminate hyperblinking. 

If you wish, you can also convert the old turn signal socket to an extra high-mounted backup light! Each kit comes with the wires to accomplish this (see video for details) but you will need new white LED bulbs. You must use LEDs, not standard bulbs, because you will be drawing power from the backup light circuit.

Factory backup lights: 250 lumens
HP48: 280 lumens. SMD LEDs arranged radially.
HP11: 310 lumens. LED panels in an aluminum housing.
XP80: 510 lumens. High-power chips in an aluminum housing, designed for maximum output.

Year 2014,2015,2016
Make Toyota
Model 4Runner
Application Tail as Turn
  1. A great product at a great price Review by gundrted

    This was installed on a '17 4Runner and there were no issues.

    I did not fully remove the tail light like the video shows. I did unscrew the tail light but it didn't come out. There appeared to two extra clips on my '17 model. Again I was able to easy plug in the module without removing the tail light.

    My 5 Star review is only for the module. I didn't purchase LED bulbs with the unit. I felt the bulbs on this site were not a good value. I will be purchasing LED bulbs else where.

    A lot of companies will charge an arm and leg for a module like this. I called with questions before ordering and the staff is very friendly and professional. For the module on its own I feel this is a great value and from a great company.

    The only issue I have doesn't warrant a star reduction. Personally I don't like the T splice included with the product. They style of connector is NOT what I prefer to use when making electronic mods. The crimp style splicers permanently damage the wire they are used on. I'll be purchasing Posi-Taps and using them to attach the spice wire for the reverse light. (Posted on 2/16/17)

  2. Awesome and quick mod for tail as turn Review by William

    Seen the video on YouTube and thought it was pretty cool. Placed order and shipped Pretty quick took maybe 10min. Works perfectly. No major complaints. Just wish it was plug and play for the extra back up light instead of splicing. Great product otherwise! (Posted on 2/10/17)

  3. Positive Review by Kell

    Love the ease of instalation, looks and function are great..
    Highly recommend for 5th gen 4runner. (Posted on 1/3/17)

  4. Awesome produxt Review by Chris

    This product is awesome. Makes my lights look great! Very pleased! (Posted on 1/2/17)

  5. Tail as Turn Review by Bentot

    Amazing item, easy to install, highly recomended to other 4runner owners (Posted on 11/6/16)

  6. Tail as Turn Review by Bentot

    Amazing item, easy to install, just plug and play. Highly recommended to other 4runner owners. (Posted on 11/6/16)

  7. Incredible upgrade Review by Mati-O

    Just installed on 2016 SR5 16 oct 16. I watched the YouTube video first and install was easy after that. Awesome upgrade but for the price as a kit is the trade off. No need to ask what size bulb etc on Toyota blogs. It's all there. I recommend doing the complete bulb change over with mid size back up light after old turn signal spot, not back up stop is empty. At one point one side large back up light did come on. This was due to male end connecter slipped above female connector so make sure it goes in and not slide over. Also after installing t-tap firmly press it with pliers to make good contact through spliced wire inside. And add diode grease inside and inside connectors. Buy a $1 extended 10mm socket, a wrench will get your hands cut up like me. 4 stars for now but I expect it to be 5 later on. (Posted on 10/18/16)

  8. Good Product Easy Install Review by TR

    Overall this is a very good product that was easy to install. The instructions and the video were spot on. The extra light when backing up is great. You def don't need to pay extra for the higher output blubs. I think that would be way too much, the standard bulbs work just fine. The only two issues that are minor are: if you are going to advertise this as tail as turn it should have the bypass pre-connected, opposed to you having to use the wire splice connector, secondly the module has long wire and the housing metal to it can bang the sheet metal inside the rear quarter panel if you don't tap the modules together or wire tie them before you complete the install.

    Overall, very happy and would recommend. (Posted on 10/10/16)

Worry-free warranty

  • -Full 3-year warranty on all products
  • -No waiting: we usually send new items out with a return label (US customers only)


You will get quick help from our trained staff for any issues.

All Stage Series products carry a limited 8-year warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Just $5 per order with our Diode Delivers program
  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 2-4 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured


International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:


30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.


Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.


Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.


To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!