TALK TO A LIGHTING EXPERT314-205-3033M-F 9-5 CST

Backup LEDs for 2014-2016 Chevrolet Silverado (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships Monday, September 25 if ordered in the next 2 days, 18 hours and 34 minutes!

$20.00
Upgrade to LED!
  • HP5 (92 lumens)
  • HP36 (210 lumens)
  • XP50 (410 lumens)
 
Add to Wishlist

Backup LEDs for 2014-2016  Chevrolet Silverado (pair)

Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)

BULB DESIGN

HP5: Four high-power SMDs, under a diffusing lens. Just like the HP3, but run at higher power, with integrated copper plating for superior heat dissipation, allowing maximum brightness.

HP36: Full 360 degree illumination with 36 High-Power Samsung LEDs. Aluminum base for optimum heatsinking, and non-polar design for easy installation.

XP50: Each of the four sides of this bulb contains two 5W-rated chips, and the top is fitted with two more under a projector lens. Housed in an aluminum casing with textured finish for maximum heatsinking properties.

Fitment. All three bulbs use a quality inject-molded 921 terminal, with a sturdy base connector and proper pin alignment, designed for exact replacement of your factory 921 bulb. You will not need resistors for backup lights. Just replace the factory bulb.

Included in your order is TWO BULBS.


COLOR

These LEDs illuminate in a crisp, cool, bright, white hue for maximum light output.


BRIGHTNESS

Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: 

HP5: Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on/off of LED technology.
HP36: Slightly higher brightness than OEM bulbs.
XP50: Much brighter than OEM bulbs. These are bright!

Lumens. BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.

 

QUALITY

LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size 921, also known as 904 904NA 906 906NA 912 916 916NA 917 920 922
Year 2014,2015,2016
Make Chevrolet
Model Silverado
Application LED Bulbs
  1. As advertised Review by Rene
    Price
    Value
    Quality

    I'm very pleased with the xp50 lights I got for my Silverado. Gave the truck the look I was looking for. Thanks for a great product. Now I need to get the cargo lights. (Posted on 9/6/17)

  2. nice product, bright lights Review by back up leds 2014-2016 silverado
    Price
    Value
    Quality

    Yes these do light things up better when in reverse. The white light compliments the backup camera as I can see much further and in more detail in pitch black conditions. The bulb is much heavier and solidly built than some other leds that I have gotten like off ebay. (Posted on 8/21/17)

  3. XP50s for the win! Review by Adamj2121
    Value
    Quality
    Price

    Diode Dynamics truly provides the best performance and quality of any LED bulb on the market, that being said the price is still a little difficult to swallow. These bulbs are incredibly bright and help tremendously with rearward visibility and backup camera quality in dimly lit areas.

    I didn't intend to purchase these for my truck, I was going to go the cheap route and buy some "equivalent" bulbs from eBay for a fraction of the price. And I did that, but the quality and performance was so terrible I ordered the XP50s within 2 days of running the knockoff LED bulbs. The benefits of the XP50 over a cheaper bulb:
    True 6000k color temperature. The cheap LED bulb claimed to be 6000k in reality it was closer to 7000k maybe even 7500k. The xp50 is a true 6000k bulb.
    More light output. The cheap bulbs I purchased claimed to be 50w total, the same as the XP50s, but the xp50s are easily 3 times brighter than the cheap LED bulbs.
    Quality. The xp50s are working flawlessly, whereas the cheaper bulbs would occasionally flicker or quit working entirely. (Posted on 6/10/17)

  4. Great product Review by gbruze59443
    Price
    Value
    Quality

    Excellent lights! Plug and Play on my '15 Silverado. They are very bright and look great on the truck. (Posted on 2/6/17)

  5. Excellent Review by Jim
    Price
    Value
    Quality

    Very easy to install and vast improvement in the lighting for backing up particularly in wet weather. (Posted on 1/17/17)

  6. HP36 Review Review by Matt B.
    Price
    Value
    Quality

    I purchased a pair of the HP36 LED reverse bulbs after having problems with two other sets of bulbs. Needless to say, these bulbs work great with my 2015 Chevrolet Silverado 1500 LTZ. Very simple installation which can be done in under 5 minutes. Price is a little high but the bulb is well worth it and is of great quality. The only thing to note is that when testing the bulbs for polarity to make sure your truck is turned on and running otherwise the lights may not come on initially as with my truck. (Posted on 12/13/16)

  7. Excactly What I was Looking For!! Review by Greg
    Value
    Quality
    Price

    Very easy to install and the additional light aids in backing up at night. Extremely happy with this purchase for my '16 Silverado and would recommend to others! (Posted on 8/12/16)

  8. HP5's interfere with Remote Keyless Lock Operation Review by Rand
    Price
    Value
    Quality

    The interior and backup lights actuate when the key fob is pressed. The HP5's have a frequency that interferes with the remote receiver so it becomes intermittent. First press of the key fob will work but subsequent presses are blocked until the HP5's lose voltage. (Posted on 6/4/16)

  9. Xp 50 - Review by Bugzzy
    Price
    Value
    Quality

    Excellent product ! Very high quality ! Easy installation , looks great , brighter than stock and led color looks great ! There a little pricey , but worth it in my opinion , like most things you get what you pay for , you'll be happy with them !
    I started with fog lights , reverse , license plate , cargo couldn't be happier with everything , great company , excellent product !! (Posted on 6/1/16)

  10. XP50 Review by E
    Price
    Value
    Quality

    I bought the XP50 bulbs because I wanted a lot of light when backing up. They work great. A bit on the expensive side but overall worth the money. I would recommend these bulbs to anyone looking for a lot of light. (Posted on 2/14/16)

  11. Very nice! Review by Trevor
    Price
    Value
    Quality

    Great quality light! Love how it's a nice bright crisp light. Definitely brighter then stock. Got the xp50 and I'm very pleased. (Posted on 1/4/16)

  12. Beyond expectations! Review by Brian
    Price
    Value
    Quality

    Wow, cant get any brighter than this!!! The XP50's are the way to go!. My 2015 Silverado has great lighting and more to come by Diode Dynamics! (Posted on 12/17/15)

  13. XP50 LED reverse bulbs Review by C.Rod
    Quality
    Price
    Value

    I ordered the XP50 LED reverse bulbs for my 2015 Chevy Silverado and I couldn't be any happier about how they look and perform. The XP50 LED reverse bulbs increase visibility by far from the original bulbs. These are bright! (Posted on 10/8/15)

  14. Amazing!!! Review by Zman
    Value
    Quality
    Price

    These lights are the brightest cleanest looking led projection ever!!! Extremely happy about them. They might be a little more expensive than what others sell for but they are top of the line quality and out performs all other when genuine CREE led (Posted on 6/26/15)

Backup LEDs are a direct replacement. Just change the bulb! You will not need any resistors or other accessories.

Remove your factory bulb

  1. 1. Access the bulb or tail light. You may need to pull back the trunk/cargo carpet and/or unscrew the visible nuts holding the light in.
  2. 2. Remove the backup bulb socket by twisting counterclockwise.
  3. 3. Remove the factory bulb from the socket.

 

Install your new LED bulb

  1. 1. Plug new LED bulb into socket by pushing it in fully.
  2. 2. Test the function of the bulb. If it does not work, remove it, rotate, and reinstall in the socket.
  3. 3. Insert socket back into place, and reassemble as necessary. That's it!

Worry-free warranty

  • -Full 3-year warranty on all products
  • -No waiting: we usually send new items out with a return label (US customers only)

 

You will get quick help from our trained staff for any issues.

All Stage Series products carry a limited 8-year warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 3-5 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured

 

International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.


You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:

Returns

30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.

Exchanges

Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.

 

Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.

 

To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!