Door Light LEDs for 2015-2016 Dodge Challenger (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships today if ordered in the next 11 hours and 42 minutes!

  • Natural White (4000K)
  • Red
  • Pure White (5000K)
  • Cool White (6000K)
  • Warm White
  • Blue
  • Green
  • Amber
  • SMD2 (24 lumens)
  • HP3 (56 lumens)
  • HP5 (92 lumens)
Add to Wishlist

Door Light LEDs for 2015-2016 Dodge Challenger (pair)

More Views

  • 2015 Dodge Challenger SRT8 Puddle/Door Light Collage
  • 2015 Dodge Challenger SRT8 with 194 HP5 Cool White LED Puddle/Door Lights
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)


Door light bulbs are used to illuminate the step area when your doors are opened. From the factory, the bulbs are incandescent, lighting up in a yellowish color.

Newer luxury cars use LED modules to illuminate this area with a cool, white light. By changing your door light bulbs to LED, you can easily add this luxury look to your vehicle, while improving brightness for increased function and performance.

The installation is 100% plug-and-play, just replace your factory bulb.



SMD2: Compact design, with two 5050-size Epistar SMD chips, driven at high power for maximum effective brightness. Outputs at 180 degrees.

HP3: One high-power SMD under a diffusing lens for truly even output (no hotspots). Constant current design and air-cooled base for superior reliability. Features dual contact pins and nonpolar function for easy installation.

HP5: Four high-power SMDs, under a diffusing lens. Just like the HP3, but run at higher power, with integrated copper plating for superior heat dissipation, allowing maximum brightness.

SMD12 Board: Also an LED panel, with 12 SMD chips. Due to the increased size, this may need to be mounted to the exterior of the trunk light housing.

Fitment. All bulbs use a quality inject-molded 194/168 T10 terminal, with a full-size base connector and proper pin alignment, designed for exact replacement of your factory 194 bulb. Just remove the old bulb, and plug in the new LED.

Included in your order is TWO BULBS.


These LEDs are available in crisp, bright colors including White, Warm White, Blue, Red, Amber, and Green.

 We strongly recommend white or warm white for maximum visibility.

Color Reference Banner


Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: 

SMD2: Slightly lower brightness than OEM bulbs, but still provides the crisp, modern color of LED.
HP3: Slightly higher brightness than OEM bulbs.
HP5: Nearly triple the brightness of stock OEM bulbs!
SMD12 Board: Much brighter than OEM bulbs. These are bright!

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.



LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size 194, also known as T10 W5W W3W 147 152 158 159 161 168 184 192 193 259 280 285 447 464 501 555 558 585 655 656 657 1250 1251 1252 2450 2652 2821 2921 2825 175
Year 2015,2016
Make Dodge
Model Challenger
Application LED Bulbs
  1. Awesome lights Review by Scat pack

    Great lights really changes the look. (Posted on 9/16/17)

  2. Brighter and more focused beam of light Review by Deluxe

    I am torn between the red and white version of this bulb. In the end I picked red as it really pops on a white car. Is a good choice for the door light as it does a better job focusing the light. I had a previous version with leds on the side but this one is a better fit for the bottom of the door light. (Posted on 8/16/17)

  3. Some call them puddle lights Review by ERIK

    When I open my door or my passenger opens the other side a nice red light shines down on the ground. The color is a nice touch installation was easy (Posted on 8/12/17)

  4. Looks great Review by Theo

    I put in the cool white LEDs and the difference in looks is amazing. There is a clear light that comes out now and it gives it a great look. The install was easy, I had no issues at all. Hardest part was just laying down on the pavement to get to the lights. (Posted on 4/25/17)

  5. Love it ! Nice and bright! Fast shipping Review by Corey

    Loved the door lights ! Looks great ! (Posted on 3/13/17)

  6. Very nice light Review by Christopher

    These puddle lights are excellent. Brighter than what I've seen elsewhere. Note that DD LED's typically run brighter than their competition. Great lights!! (Posted on 11/16/16)

  7. Not impressed Review by Fo-20

    First off, the factory lights straight up suck!!! I ordered the 92 lumen lights for my 2016 Challenger, and although brighter they're not super bright.
    The bulb itself sits sideways in a housing. If it pointed down, it would be much brighter. But that's a factory design flaw in my opinion. (Posted on 8/13/16)

  8. Great bulbs Review by Gagan

    Got the cool white HP5 bulbs. installation is easy, but be careful when pulling out the cover, its very easy to break the locking tab if you try to force it out. You have to push the lock tab with a flat screwdriver through the slot. (Posted on 8/11/16)

  9. Look great! Super fast install. Review by Richard

    i got the red hp5 (92)lumins and they are bright! the only hard part about the install is laying on your back to make it easier to get to the lights on the bottom of the door. other than that,intall was fast and easy,bright led's,and super fast shipping,what more can you ask for! (Posted on 8/8/16)

  10. Money well spent & highly recommended!! Review by JR

    I ordered the cool white 6k/HP5 (92 lumens) bulbs and are just perfect to light up the door! I have a '16 Challenger and I'm not sure why Dodge used cheap yellow bulbs for the doors, as these DD LED bulbs make the interior look amazing and when I open my door I can see everything! I love these bulbs and they are a 10/10! (Posted on 6/1/16)

  11. Installed Red HP5R (92 Lumens) Door Puddle Lights Review by JimM

    Installed Red HP5R (92 Lumens) Puddle Lights in my TorRed Challenger Scat Pack. LEDs installed as a direct replacement to factory bulbs as advertised. (Posted on 2/15/16)

  12. great direct replacement Review by Ian

    Installed a pair of these in 56 lumen on my 15 SRT. Quick replacement once you get the hang of removing the old lights. However, I was slightly disappointed with the brightness, which is no fault of Diode Dynamics, simply the design of light housing(lights insert sideways). If you're looking for something a lot brighter like I was, get the 96 (or whatever lumen bulbs. I am still extremely happy with the product. (Posted on 2/12/16)

  13. Great upgrade Review by Art

    I installed the HP5 cool white on my 16 Scat Pack Shaker and they are great! Way better than the ugly yellow stock bulbs. Install was very easy and quick. Thanks DD! (Posted on 1/4/16)

  14. Great Review by Expo6

    These are a great item to replace the boring white lights that come standard. Fit in easily and look great. (Posted on 9/29/15)

  15. Worth it Review by tlunchbox

    When I opened the doors I barely see the light but now I can see it with the cool white hp3 . Great product, would recommend and shop again (Posted on 8/7/15)

  16. Nice improvement over incandesent for the price. Review by txborn58

    Installed in 2015 Challenger SRT. HP3 in Cool White. If you want it even brighter, get the HP5. See before and after shots. (Posted on 6/24/15)

Worry-free warranty

  • -Full 3-year warranty on all products
  • -No waiting: we usually send new items out with a return label (US customers only)


You will get quick help from our trained staff for any issues.

All Stage Series products carry a limited 8-year warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 3-5 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured


International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:


30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.


Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.


Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.


To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!