Fog Light LEDs for 2015-2016 Dodge Challenger (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships today if ordered in the next 27 minutes!

  • Natural White (4000K)
  • Pure White (5000K)
  • Cool White (6000K)
  • Yellow
  • HP48 (280 lumens)
  • XP80 (520 lumens)
  • XML2 (1420 lumens)

View product. Typically required to prevent bulb-out warnings on newer vehicles with CANBUS systems. Upgraded, modern version of the generic "warning canceller." Plug and play, made in USA.

Add to Wishlist

Fog Light LEDs for 2015-2016 Dodge Challenger (pair)

More Views

  • XML2 Cool White
  • 2015 Dodge Challenger SRT8 Fog Light Collage
  • 2015 Dodge Challenger SRT8 with H11 XML2 Cool White 5000k Fog Lights
  • 2015 Dodge Challenger SRT8 with H11 XP80 Cool White Fog Lights
  • 2015 Dodge Challenger SRT8 with H11 XP80 Yellow Fog Lights
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)


Fog Light LED bulbs are an excellent way to improve the appearance of your vehicle. From the factory, most vehicles come with halogen bulbs, which project in a yellowish light. By replacing them with LEDs, you can create a modern appearance with the cool white light of LEDs.

The installation is 100% plug-and-play, just replace your factory bulb!

Please note: Fog Light LEDs are primarily for cosmetic upgrade. Some models may not provide an increase in output.


HP48: This bulb is designed with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.

XP80: Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more, under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.

XML2: Two opposing genuine CREE XM-L2 chips, driven at high power by self-contained regulator unit, in an attractive cast-aluminum housing. Fully waterproof, non-polar, modular design. 

Fitment. SMD, HP, and XP bulbs use an inject-molded terminal, with a full-size base connector, designed for exact replacement of your factory bulb. The XML2 bulb fits in the same way, but also requires an additional 2" of clearance behind the bulb socket- see pictures.

Included in your order is TWO BULBS.


These LEDs illuminate in a crisp, bright, cool white hue. The XML2 is also available in natural white, pure white, and yellow.


Diode Dynamics offers several brightness options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb, compared to the factory bulb.

HP48: 265 lumens. Slightly lower brightness than factory.
XP80: 510 lumens. Similar brightness to factory.
XML2: 1410 lumens. Much brighter than factory. These are bright!

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum. 

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.



LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as CREE, Epistar, Cree, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size H11
Year 2015
Make Dodge
Model Challenger
Application LED Bulbs
  1. great match Review by Blue392

    Used these to replace the stock yellowish bulbs, the new LED bulbs look great and have a high quality build to them, the color is a great match for the halo rings and a great compliment to the stock HID bulbs in my scat pack (Posted on 7/22/17)

  2. So Far So Good Review by Brian

    I just purchased the original bulbs with the 6000k temperature and they look great! I enjoy the bit of blue while at the same time complimenting my halos much better than the factory halogens. (Posted on 6/28/17)

  3. very happy with the install and final product Review by dusty

    I installed the anti flicker and the led that matchs the headlights, The anti flicker that plugs in to the factory wire harness coupler has three little tits on it. I removed one of the tits with a razor knife and the anti flicker assembly fit

    (Posted on 2/12/17)

  4. Very Satisfied with these lights Review by FredB

    I purchased these lights on Black Friday at 20%off. It took longer than I liked to receive them, but the results were worth it. I'm wondering if some other drivers think they are too bright, they're that bright (Posted on 12/31/16)

  5. Trying to decide whether not to purchase the upgrade fog light kit Review by Big Jon

    Some people say they were easy to install, others had to wait for replacement parts because the original parts didn't fit? I just want something that's going to brighten up my field of vision and also match the color of my halos on my RT (Posted on 9/12/16)

  6. good bulbs but a bitch to hook up anti flicker module Review by LJB

    I finally got around to swap my fog lights for ones that match. I got them at diode dynamics with the anti flicker module. The first anti flicker module would not fit on the bulb housing no matter what i did, so i switched to the other anti flicker module and it was lighting up as soon as i pushed it in. 20 seconds and we have 1 in. Went to the other side and tried and no go. 2 hrs later i gave up and call them up and explained my problem. They sent me 2 more anti-flicker modules. I got them today and tried with the 2 new ones and no go again. 2 more hrs go by. Only way to make the left side light was if i take the female housing off the anti flicker and take off the male housing on the car. i did that and splice the wires together with a but connector and taped the hell of them and it works now. Either the female housing on the car is messed up or the male housing on the anti flicker is messed up. Those who gave it 5 stars and said it was quick obviously didn't have to deal with the anti flicker module. (Posted on 9/3/16)

  7. Led fog lights Review by Boggs

    So far so good they only been in for a week they match head lights perfectly I had a issue with one anti flicker module and they sent out a new set right away customer service seems real good three year warranty so let's see how it goes install was a breeze if your some what handy looking to buy some interior lights next (Posted on 8/21/16)

  8. Quality products Review by Fo-20

    You get what you pay for. I ordered numerous items for my 2016 Challenger Scat Pack. The stock stuff wasn't cutting it.
    The new lights are all far superior from the stock halogen crap. (Posted on 8/12/16)

  9. 5 min. job Review by joelee

    installed in my 2015 challenger rt. 5 min. on each side.
    good quality, fast shipping & delivery.
    a bit pricey.. but it's worth it.
    I'm glad I didn't waste money on cheap stuff. (Posted on 3/21/16)

  10. Looks great! Review by Steve

    Replaced stock fog lamps with 5000k pure whites on xml2's with anti flicker modules. As described by other reviews, these are very close match to headlights on my '15 SRT392 Challenger! Very easy install as YouTube video demonstrated. The only issue I had was the stock bulb housings have little bump under each locking tab to ensure tight fit, which the xml2 is lacking. Had to "Mickey Mouse" a little with electrical tape to make fit tighter. Otherwise great product!! (Posted on 2/28/16)

  11. AMAZING!!! Review by Jose

    Ended up going with a pair of the Yellow LEDs on my 2015 Scat Pack and the final outcome is just Amazing. (Posted on 1/25/16)

  12. Cool White XP80 Review by KLane

    Replaced the factory fog lights with the Cool White XP80 - The color matches great to my factory halo headlights. Easy to install.
    Great quality!! Thank you for your description of each light - helped me make my mind of which light I wanted to go with.
    Kristi (Posted on 1/10/16)

  13. Pure White 5k Option XML2 Review by Todd

    Great replacement that fit with no adjustment needed. 5k pure white option matches headlight extremely well and looks 1000 times better than the stock fog lights. This is a must have replacement mod for the 2015 Challengers. (Posted on 1/5/16)

  14. Great Quality Fog Lights Review by Double V

    I replaced my factory fog lights with the Pure White LEDs for my '15 Challenger Scat Pack and they match my halos and headlights perfectly. Much brighter than stock. (Posted on 6/8/15)

This product is a direct replacement. Install as follows:

Remove your factory bulb

  1. 1. Unplug factory connector.
  2. 2. Twist bulb counterclockwise and remove from socket.


Install your new LED bulb

  1. 1. Plug LED bulb into factory connector. 
  2. 2. Insert bulb into socket, and twist clockwise to lock in place. That's it!

Worry-free warranty

  • -Full 3-year warranty on all products
  • -No waiting: we usually send new items out with a return label (US customers only)


You will get quick help from our trained staff for any issues.

All Stage Series products carry a limited 8-year warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 3-5 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured


International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:


30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.


Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.


Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.


To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!