Front Turn Signal LEDs for 2013-2016 Scion FR-S (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships today if ordered in the next 11 hours and 27 minutes!

Upgrade to LED!
  • Amber
  • Switchback - Cool White (6000K) and Amber
  • HP24 (410 lumens)
  • HP48 (280 lumens)
  • HP11 (310 lumens)
  • XP80 (520 lumens)

To stop hyperblinking, you can replace your flasher module with this one, designed for LEDs. If you purchase this, resistors are not needed. Only one needed per vehicle. Click here for more details on the SmartTap.

A set of 6 ohm resistors and connectors, to slow down the fast-blinking caused by LEDs. Can be used on any vehicle. See install video and information below.

Add to Wishlist

Front Turn Signal LEDs for 2013-2016 Scion FR-S (pair)

More Views

  • HP11 Amber
  • XP80 Amber
  • HP24 Switchback
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)


From the factory, turn signal bulbs are powered by standard incandescent lights that light up amber in color.

Newer luxury vehicles are using LEDs for turn signals, because LEDs offer a crisp, instant on/off, increased brightness, and true, vibrant color. By replacing the bulbs in your vehicle, you can achieve this modern look!

You can even add functionality to your vehicle with switchback bulbs! These light up bright white for running lights instead of dim amber, but still blink amber when you activate the turn signals, for a unique dual-color effect!

The installation is 100% plug-and-play, just replace your factory bulb. The bulb may blink faster since it uses less power, and your vehicle thinks the bulb is out- to fix this, please see "hyperblinking" section below.



HP48: This bulb is non-polar, CK compatible, with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.

HP11: Four side-firing 1.5W-rated Osram LED chips, and one 5W-rated LED chip on top, which is projected by a lens for maximum effective brightness. The bulb is housed in a machined aluminum casing, which provides superior heat diffusion for long life.

XP80: Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.

HP24: 16 amber and 8 white, high-power LED chips. Full aluminum body for durability and advanced digital latching circuit for color control. 6000k, Cool White to match your HIDs or other LED applications. 

Fitment. All three bulbs use a quality inject-molded 7443 terminal, with a standard base connector and proper pin alignment, designed for exact replacement of your factory 7443 bulb.

Included in your order is TWO BULBS.


Amber: These LEDs illuminate in a crisp, bright, amber color.

Switchback Option: Your vehicle may be able to use a specialty bulb known as "switchback." This bulb is only suitable when there is a clear reflector. Normally, your front turn signal lights up half power amber when you turn on your headlights, and flashes full power amber when the turn signal is activated.

By using this dual-filament design, along with an integrated controller chip in the bulb, you can get a very cool effect: the switchback bulb lights up white when your headlights are turned on, and flashes amber when you use the turn signals. When you switch the turn signal off, it "switches back" to white. This allows you to gain a uniform white appearance in the front of the vehicle at night, while still having amber turn signals.

Diode Dynamics only lists amber and switchback bulbs for the front turn signal. This is because other colors, such as white and red, are not legal for front turn signal use. Please view other pages for other colors and applications.


Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: 

The amber bulbs in this listing are dual-brightness, and will illuminate at 60% power for parking/running lamp, and 100% for full turn signal.

HP48: Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on/off of LED technology.
HP11: Slightly higher brightness than OEM bulbs.
XP80: Much brighter than OEM bulbs. These are bright!

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.




LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.

While our bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.


The turn signals on most vehicles will begin to blink fast (hyperblink) when LED bulbs are installed. This is because the new LEDs will use less power than the original bulbs, so your vehicle thinks that the bulb is out and warns you by hyperblinking.

This phenomenon will be the same for every LED bulb on the market- there is no such thing as a "no hyperblink" LED bulb, even though some companies advertise them as such.

Flasher Replacement: Replacing the flasher relay, the module that controls blinking speed, is the easiest option to correct hyperblinking. You can remove the flasher on your vehicle, which is a small relay module under the dash, and replace it with a new flasher designed for LEDs. You will only need one flasher for your vehicle, whether you are replacing just one pair or both sets of turn signal bulbs (front/rear).

Resistor Kit: If you prefer not to change the flasher, you can add resistors to the bulb's circuit, and mimic the power consumption of the original bulb, returning the vehicle to normal turn signal speed. Resistors are a universal fix for any vehicle. Our resistors are 50W, 6 ohm, and come with extra-long connection wires for easy install. If you have both front and rear LED turn signals, you should purchase one set for each pair, to create enough resistance for the whole turn signal circuit. The installation itself takes only 10-15 minutes, and involves making two simple connections. Everything you need is included in the kit. 

Bulb Size 7443, also known as 7444NA
Year 2013,2014,2015,2016
Make Scion
Model FR-S
Application LED Bulbs
  1. Stage 2 looks great but spendy Review by D.J.

    Got these to upgrade the last if my lights to led. Don't have HIDs and did t want my turn signal lights brighter than my headlights so I went stage 2 and am very happy! Price was higher than expected but if these last as long as they should they'll be worth it. Like a lot of others that reviewed, I used electrical tape around the bases so you can't see the ugly amber they come with. (Posted on 5/12/17)

  2. Great colour Review by Slip

    The rear amber turn signals have a great brite color. The yellow at the base of the bulb reflected into the housing of the turn signal. So I just painted them white and that cleaned it right up. (Posted on 4/30/17)

  3. HP24 (410 Lumens) (Cool White 6k + Amber) Review by Turvthepurv

    The switchbacks are just absolutely amazing. While using the turn signal, the bulb will produce a Cool White 6k color, but will revert back to an amber color once the turn signals are in use. It just looks AMAZING on the car especially with the instant on/off compared to the stocks which glow on/off. (Posted on 8/30/16)

  4. Lights up the sides of the road nicely! Review by Samuel

    Ordered thee to match the 6000k HIDs and they are an awesome combo. Pricey but definitely worth knowing they have warranty if anything goes out! (Posted on 5/9/16)

  5. Nice Upgrade Review by TG

    Just installed these LEDs today. Definitely helps to watch a video to make the installation go smoothly. The new bulbs are bright. I installed the relay as well. Everything seems to work as promised. (Posted on 1/3/16)

  6. Neat! Review by Jared

    I ordered the Cool White and Amber HP24 LEDs and they are very cool. I really like the all-white look when the turn signals aren't being used. My only small complaint is there is a little pause when you activate the turn signal and it switches to amber before it starts actually blinking, but it is something I can get over. (Posted on 12/23/15)

  7. Cool White and Amber Switchback HP24 Review by Sergio

    I initially had issues with the switchbacks not working properly, and also they would fall into the housing every now and then. After 3rd replacement sent by Diode Dynamics with no questions asked, it now works perfectly, had them on for almost 6 months now. Works perfect, looks perfect. Great product. (Posted on 12/3/15)

  8. Great product, very clean light, very cool effect Review by Steve

    I purchased the switch back turn signal replacement and I am very happy with the results. It was super simple to install (remove four screws, pull back material, swap out bulbs, put it back together) and looks great.

    The bulbs are very high quality and look great. The only drawback is that the switchbacks have very obvious yellow/orange LED's that are visible during the day, but they look very high tech, and for the most part, the reflector still looks clean. I am taping off the base with black electrical tape to reduce the reflection a little.

    I also purchased the blinker relay replacement. Very easy to install also, and I've got huge hands. There is an issue with the alarm not lighting the front lights and my understanding is there is an expensive solution, but for $10 this solves the problem for all of my LED's.

    The only reason for 4 stars is I'm cheap and don't like to spend money, but the overall quality of this LED is way up there, 5 stars for sure. (Posted on 3/2/15)

  9. Amber XP80s Review by Chris

    I got the Amber XP80 7443 LEDs for my FR-S front turn signals and they were a perfect fit. They're a bit brighter than stock and are basically better than the stock bulbs in every way.

    The only complaint I have with this LED is that the base is yellow (you can see it from the pictures). One of the reasons I swapped to LEDs was to get rid of the yellow/orange reflection in the housing due to the amber halogen bulb.

    Unfortunately, the yellow base now reflects yellow in the housing. I was able to easily fix this by wrapping the base with some black 3M electrical tape and now the bulb is perfect - the chrome housing doesn't reflect any color now when the bulb is off.

    The price is bit high at $90 but other LED turn signals are not as bright as this one. You pay for the output and quality of these bulbs vs cheap no-name ebay ones. (Posted on 2/18/15)

  10. Another great product Review by Chris

    I ordered the XP80s in amber. First opinion was WOW! So bright and such a nice color. At night with my headlights on I can tell when they are on. (Posted on 1/28/15)

  11. Awesome Review by JoshFRSRaven

    This change really is night and day when you go from halogen to LED. Especially with the on and off of the signal. Instead of that fade in, fade out, it is a definitive on/off. Super crisp, bright, and modern. One thing is, it is a little tricky to install since it is longer than the halogen bulb and they don't give you a whole lot of slack with the OEM wiring, so it is a litter hard to maneuver in the hole. (Same with the rear turn) (Posted on 1/8/15)

  12. Clean modern color, instant on-off Review by Kaleb765

    these LEDs give you a more modern, clean light color than the stock bulbs, and when the blink it is an instant on-off-on-off that also gives the car a more modern look, also looks better than the ugly orange stock bulbs when off (Posted on 10/29/14)

  13. Great Product! Review by czechm8

    These LED's add just the right amount of personal flair. Thank You! (Posted on 4/22/14)

  14. Level 1 is Plenty! Review by Nicholas

    I love the way the Level 1 look and they are plenty easy to install. Be the envy of the FR-S crowd. (Posted on 2/6/13)

Worry-free warranty

  • -Full 3-year warranty on all products
  • -No waiting: we usually send new items out with a return label (US customers only)


You will get quick help from our trained staff for any issues.

All Stage Series products carry a limited 8-year warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 3-5 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured


International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:


30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.


Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.


Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.


To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!