Fog Light LEDs for 2010-2017 Jeep Wrangler (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships tomorrow if ordered in the next 20 hours and 45 minutes!

  • Natural White (4000K)
  • Cool White (6000K)
  • Yellow
  • HP48 (280 lumens)
  • XP80 (520 lumens)
  • XML2 (1420 lumens)
  • SLF
Add to Wishlist

Fog Light LEDs for 2010-2017 Jeep Wrangler (pair)

More Views

  • XP80
  • XP80
  • XP80
  • HP48
  • XP80
  • XML2
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)


Fog Light LED bulbs are an excellent way to improve the appearance of your vehicle. From the factory, most vehicles come with halogen bulbs, which project in a yellowish light. By replacing them with LEDs, you can create a modern appearance with the cool white light of LEDs.

The installation is 100% plug-and-play, just replace your factory bulb!

Please note: Fog Light LEDs are primarily for cosmetic upgrade. Some models may not provide an increase in output.


HP48: This bulb is designed with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.

XP80: Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more, under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.

SLF: Six Luxeon ZES chips replicate factory halogen filament for focused beam pattern and minimal glare. Copper PCB core and zinc diecast housing provide superior thermal management and extended LED lifespan. Fully waterproof, non-polar, modular design. 

Included in your order is TWO BULBS.


These LEDs illuminate in a crisp, bright, cool white hue.


Diode Dynamics offers several brightness options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb, compared to the factory bulb.

HP48: 265 lumens. Slightly lower brightness than factory.
XP80: 510 lumens. Similar brightness to factory.
SLF: 850 lumens. Much brighter than factory. These are bright!

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum. 

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.



LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as CREE, Epistar, Cree, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size PSX24W
Year 2010,2011,2012,2013,2014,2015,2016,2017
Make Jeep
Model Wrangler
Application LED Bulbs
  1. Overall Happy Review by XFC

    Hello all, just wanted to leave a review on these lights, hopefully it can help others decide on these or not. So you know, this is based on a 2017 JK Unlimited Sport.

    Price: These lights are going to cost you over $100. For the quality of the light and the brightness, I think it's worth it. Unfortunately, it may force others to look at lights just as bright for half the price. In my situation, I didn't not want to change the entire fog light and install something completely new on the jeep. I was looking for the best quality plug and play LED fog light.

    Quality: The LED light itself is superb. The only reason I gave it 4 stars on quality is because the light housing itself doesn't seem to naturally clip onto the JK clip/bracket. When I was installing it, it is truly plug and play. I removed the old bulb and attached the new light. However, when trying to clip in the light once it's aligned, it doesn't seem to naturally click in. I pushed with some force serval times and no click. DO NOT push with force! The solution to this is placing it and holding it onto the clip firmly and then pushing each individual clip in until you hear the click.

    These lights are VERY BRIGHT. You can almost run these alone as headlights. That's how bright they are on the street. Overall, great buy if you want a true plug and play with awesome brightness and great quality.

    (Posted on 7/3/17)

  2. Good value - minor fitment issues Review by CAJKU

    I purchase the natural white XML2 (1420 lumen) units for installation in a 2012 Jeep JKU.

    These bulbs are bright!

    The only negative thing that I have to say is that the connector that mates with the JK wiring had a slightly different pattern that the stock wiring connectors. It took me about an extra 20 minutes to modify the connectors so that they would fit.

    The lamp seemed to fit well into the stock fog light assembly and I did not feel that I needed to epoxy the connection.

    I was mounting them into an AEV bumper and did not run into any interference issues. (Posted on 5/22/17)

  3. Excellent option for the price! Review by Josh

    As Michael mentioned above, need to add a small amount of epoxy to the housing just to make sure they stay put, but other than that, they are awesome. Literally installed in less than 10 min. Mine are in a Smittybilt SRC Carbine bumper. (Posted on 11/23/16)

  4. The perfect fog lights I have been looking for!!! Review by Michael

    I recently installed a pair of the Yellow XML2 fog lights on my 2012 Jeep JK Rubicon. The install was about 10-15 minutes and the finished product exceeded my expectations. The fog lights projected a very wide and bright light pattern and the color was a pronounced yellow, unlike other competitors. Don't be fooled by those cheap knockoff lights that claim to be more than they really are. I would recommend this product to anyone who wants to get maximum light output from their Jeep JK fog lights, but doesn't want to go through the hassle of installing an HID kit. (Posted on 10/26/16)

  5. XML2 Fog lights in '15 Rubicon Hard Rock Review by Kevin

    I purchased the Cool White (6000K) Model XML2 Fog lights for my 2015 Rubicon Hard Rock.

    Pros: Exceptionally bright (1420 Lumens) -there is no comparison to the OEM's / The color temperature is as advertised.

    Noteworthy- the rear of fan housing of the XML2 is larger than others I have seen, so make sure you have room behind the fog, as it will extend out about double the distance of an OEM.

    Cons: As is common with all aftermarket Wrangler lights, they do not fit the HardRock-10X-X Rubicon bumpers well. The item is indeed 'plug and play' and a quick install. However the unit does not want to stay clipped on. (A small speed bump would have dropped it loose.) Because of that, I used a small amount of epoxy on the two clips that are supposed to keep it I place.

    I did call Diode Dynamics and they were very helpful, offering to assist me in returning the item. However, I ultimately decided on the epoxy fix instead. I would recommend this item and would buy again, just note that it may require some extra steps.
    (Posted on 10/26/16)

  6. Pleased as driving lights moreso than fogs Review by IgnitedSoul

    I installed the XP80s in my 2015 JKU Rubicon Hard Rock. I was going to get true LED fogs to go with my Truck-Lite LED headlights, but the price plus another $60 for brackets to fit the bumper made me give these bulbs a try. At first I liked the looks, then I noticed a very tiny amount of flicker (only noticeable when looking close to the bulb), and they don't send out a focused beam in the factory housing. They rather spill light everywhere. I have some pics that I didn't post showing surrounding tree tops lit up a little and nothing noticable filling in under the Truck-Lites. I was going to send them back, but really I just wanted them to match the color temp of my headlights and for visibility using them as DRLs. They do that just fine. Some day I will likely replace them with fully integrated bulbs and housings, but these will do for now. I recommend them for cosmetics over function. (Posted on 3/23/15)

  7. Awesome Fog Lights!! Review by Jkonicki

    Took about 15 minutes total to install these on my 2015 Wrangler Unlimited Sport. The build and quality of these lights are top notch. The light output is super bright and they far surpass the output of the factory lights. I would highly recommend these! (Posted on 3/1/15)

  8. Blinding Brightness Review by James

    These are very bright bulbs, they're about 3 times brighter than stock and they're very white. They are brighter than my stock headlights, my headlights will be the next upgrade. (Posted on 9/22/14)

  9. Fog light Review by David

    Great light for brightness and color. Did have a hard time installing the bulb into the socket, it fits just very tight. (Posted on 8/31/14)

  10. Jeep Wrangler Fog Lights Review by Joshua

    These LED bulbs are way brighter than the stock bulbs! (Posted on 12/16/13)

This product is a direct replacement. Install as follows:

Remove your factory bulb

  1. 1. Unclip factory connector.
  2. 2. Unclip bulb and remove from socket.


Install your new LED bulb

  1. 1. Plug LED bulb into factory connector. 
  2. 2. Insert bulb into socket, and clip the top and bottom clips to lock in place. That's it!

Worry-free warranty

  • -Full 3-year warranty on all products
  • -No waiting: we usually send new items out with a return label (US customers only)


You will get quick help from our trained staff for any issues.

All Stage Series products carry a limited 8-year warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 3-5 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured


International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:


30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.


Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.


Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.


To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!