Fog Light Angel Eye Kit for 2010-2013 Chevrolet Camaro

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships today if ordered in the next 8 hours and 16 minutes!

DIY angel eye kit for your vehicle!
  • White CCFL
  • Multicolor SMD LED
  • White COB LED
  • Red COB LED
  • Blue COB LED

MULTICOLOR ONLY: Required for Installation

OPTIONAL: This kit includes a LED toggle switch and wiring used to turn AEs on and off.

* Required Fields

Add to Wishlist

Fog Light Angel Eye Kit for 2010-2013 Chevrolet Camaro

More Views

Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)
This product includes the rings and wiring for the foglight application only.


Angel Eyes can be installed on any vehicle as an accent for your headlights. They can be found on BMWs and are a nice modification for any vehicle. The angel eyes from Diode Dynamics are the highest quality and brightness available. Look around, you will not find better angel eyes anywhere for these great prices! Our rings were custom-designed for reliability and long life, and have been tested on your vehicle for perfect fitment. 

These angel eyes have been test-fit on your vehicle for perfect fitment. To read more about Angel Eye Rings, click here.

RGB SMD Design

These are LED rings which use 5050 size SMDs. The SMD LED chips are mounted directly on to the circular board, facing forward. The LEDs go all the way around the ring, for no "break" in the light as with other angel eye designs. This provides an extremely high light output in the forward direction. 

Typically, LED rings have resistors mounted directly on to the ring. Our RGB have improved durability and reliability by using external current regulators. The regulators are housed in a small, fully-potted (waterproof) regulator box, which is simply attached inline between the controller and the LED ring. RGB Multicolor rings have a standard 4-pin RGB connector, compatible with Diode Dynamics RGB controllers. Either controller can be used to control the rings. See below for a comparison video of the two controllers we offer. 


COB Design

These are LED rings that use COB technology, which stands for "Chip On Board." The LED chips are mounted directly on to the PCB board, so the whole board essentially becomes the LED package diffusing the light evenly from each chip. The effect is a uniform, bright light output in a full ring.

Our COB rings use an sturdy aluminum backing for superior heat dissipation and reliability. Watch out for poor-quality substitutes! Our newest COB rings do not have resistors mounted on each ring itself, but rather the power is supplied by a heavy-duty, fully waterproof and shockproof external regulator. 


What's Included

Kit includes:

  • Two (2) 5050-SMD Rings, fitted for your vehicle
  • Diode Dynamics Plug-and-Play Wiring Harness
  • Red LED Toggle switch
  • 3-year limited replacement warranty
  • 30-day satisfaction guarantee



Installation requires you to open the headlight, by using heat from either your oven or a heat gun. It sounds bad, but really isn't too hard. Simply remove all screws, heat the seal, and pull apart. We have installation videos and other helpful guides available at The wiring is a plug-and-play installation, using our Diode Dynamics Angel Eye Harness and quick disconnects. You will not have to do any soldering, wire stripping, crimping or anything. The rings only need 12V power and ground- we recommend using your parking lights, in order to have them turn on like they came that way from the factory, "OEM style."

Don't want to do it yourself? Looking for a kit for a different model? We can do any vehicle for you, with our large inventory of ring sizes. Contact us for information.

Some pictures displayed include both the headlights and fog lights angel eye application. This product includes only the rings and wiring to complete the headlight application. If you are seeking both modifications, please purchase the Angel Eye Foglight kit for your vehicle.
Year 2010,2011,2012,2013
Make Chevrolet
Model Camaro
Application LED Bulb
  1. Great Review by c5Legend

    Very easy to connect the wiring together, it comes as a kit that has relays, fuses, connectors, t-taps.. basically everything you need for the job..
    Simple plug and play
    Bright rings, wifi controller works great.
    Actual rings feel of good quality

    None really, just 1 ring came defected but was replaced via RMA promptly.

    For the price, this can't be beat. The service seems good too, I would recommend them and purchase from DD again. (Posted on 8/21/14)

  2. Fog Light angel Eye Kit A+++ Giving AAC a run for their Money! Review by LS3 SS

    I am currently waiting until the sun goes down so I can take pictures of my Diode Dynamics LED halo foglight install, but I am VERY pleased with the design of their kit.

    1. When I ordered my kit, It shipped out immediately, and I received it within two days.

    2. The packaging is almost the most well put together packaging that I've ever seen a Camaro5 vendor use. Their Black diode dynamics box has almost a "high end" look about it, letting the purchaser know that they are dealing with quality products.

    3. The kit was 100% plug n play. I didn't have to cut or splice any wires what so ever. Every piece of the wiring harness was well put together, and very easy to distinguish power/ground/fuse/relay, etc.

    4. The pricing is lower than any other halo kit on the market, I really don't need to say anything more in this sentence.

    5. When I ordered from Diode Dynamics, they sent me a 10% discount card for my next purchase that I gave to one of my buddies. Then they emailed me, wanting to get a follow up on how I liked their product, and sent me ANOTHER 10% discount.

    The only issue I had with the kit, is the instructions leave a little bit to be desired as far as details go. I am somewhat familiar with the common power/ground sources around the front bumper area, so I immediately knew where to tap into to get my kit to work properly and easily. But I imagine, someone with little to no experience with wiring probably would have had to take their car to a shop and pay $$$ just to have someone run a couple of wires to a hot and ground.

    Overall, I'm very happy with my kit, and I hope that Diode Dynamics continues to make quality products and start designing products that will compete with other companies in the same market. (Posted on 8/31/13)

Worry-free warranty

  • -Full 3-year warranty on all products
  • -No waiting: we usually send new items out with a return label (US customers only)


You will get quick help from our trained staff for any issues.

All Stage Series products carry a limited 8-year warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 3-5 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured


International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:


30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.


Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.


Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.


To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!