Backup LEDs for 2007-2017 Jeep Wrangler (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships today if ordered in the next 11 hours and 20 minutes!

Upgrade to LED!
  • HP48 (280 lumens)
  • HP11 (310 lumens)
  • XP80 (520 lumens)
Add to Wishlist

Backup LEDs for 2007-2017 Jeep Wrangler (pair)

More Views

  • HP11
  • XP80
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)


HP48: This bulb is non-polar, CK compatible, with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.

HP11: Four side-firing 1.5W-rated Osram LED chips, and one 5W-rated LED chip on top, which is projected by a lens for maximum effective brightness. The bulb is housed in a machined aluminum casing, which provides superior heat diffusion for long life.

XP80: Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.

Fitment. All three bulbs use a quality inject-molded 3156 terminal, with a locking base connector and proper pin alignment, designed for exact replacement of your factory 3156 bulb.

Included in your order is TWO BULBS.


These LEDs illuminate in a crisp, cool, bright, white hue for maximum light output.


Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: 

HP48: Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on/off of LED technology.
HP11: Slightly higher brightness than OEM bulbs.
XP80: Much brighter than OEM bulbs. These are bright!

Lumens. BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.



LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size 3156, also known as 3156A 3456
Year 2007,2008,2009,2010,2011,2012,2013,2014,2015,2016,2017
Make Jeep
Model Wrangler
Application LED Bulbs
  1. Great Product Review by Kool

    These were a snap to put in and are as bright as advertised! (Posted on 3/24/17)

  2. Very nice addition! Review by Martin

    I added these backup bulbs to my 2012 Jeep Wrangler Sahara. They have really helped seeing through the rear view camera at night. (Posted on 3/3/17)

  3. Glad I bought the XP80 Review by George

    The Jeep backup lights are marginally useful now. Now I may have to roll down the tinted side window, but I can back up safely. This is a huge improvement over the totally useless backup stock lamps. I had to tap the brakes while backing to be able to see.

    These are very easy to install (just two short screws on each lamp assembly and plug it in) and are very bright. I would purchase them again even though they are very expensive. What is safety worth?
    (Posted on 2/17/17)

  4. XP80 (520 lumens) ina '15 Rubicon Hard Rock Review by Kevin

    I purchased the XP80 (520 lumens in 6000K) reverse lights for my '15 JKU-R Hard Rock. Install is a breeze!

    Tip: Make sure you place vehicle in reverse to ensure it works before closing the housing. This is because the polarity can be backwards on LED's, which will require you to turn the bulb around (a helper would come in handy here.)

    Cheaper alternative to LED cubes: As the OEM Reverse lights provide no light on a road, never mind on a trail. I previously installed a pair of Rigid spots on a rear-tire mount I had to custom weld onto the third brake light housing (costing me about $300, total.) However, if I had purchased these XP80 (520 lumens) back-up lights, I could have avoided that. LED cubes are great, but unless you really need them on the rear, this is the best way to go. (Posted on 10/26/16)

  5. Much Better Review by Kim

    Installed the XP80's on my 2013 Jeep JK, very easy to install. They are so much better over the stock. I can now see when I back up! I'm very happy with them! (Posted on 4/30/16)

  6. Love them Review by JD

    Easy to install.. Works as advertised. Great improvement over stock. (Posted on 4/26/16)

  7. 2016 Jeep Wrangler Unlimited XP80 Reverse Review by Joseph

    Diode Dynamics makes the best, hands down, no argument at all. These XP80 bulbs are awesome in my 2016 Wrangler, INCREDIBLY BRIGHT and clean. They fit perfectly in the stock housings, and of course it's now brighter and safer when backing up!. (Posted on 4/17/16)

  8. Reverse lights. Review by Clint

    I purchased these so the hue of my reverse lights would match the rest of my LEDs inside and out on my JKU. No issues and install was straight forward. (Posted on 7/5/15)

  9. Light Me Up Review by BillM

    With these I can see like I am in daylight with the rearview camera at night. Also anyone behind me can see that I am backing up much easier. Very happy .... (Posted on 5/29/15)

  10. EXCELLENT!!!!! Review by P. Taraborelli

    I installed these in my father's 2008 Jeep Wrangler and was instantly impressed with the difference between a stock bulb and the XP80. I will buy another set for my jeep ASAP!!!! Do it! You'll save money on buying another set of auxiliary lights to add the same amount of light. (Posted on 2/23/15)

  11. Amazing Review by Cablecop

    I bought these after I sent back my Delta lights. best thing I ever did. Theyre better made and way better price. Plug and play just remember theyre led so they can only go in one way to work. (Posted on 12/5/14)

  12. Satisfied Review by Happy

    Easy plug and play with amazing quality!!! (Posted on 5/28/14)

  13. Holy Brightness! Review by Primal

    These are crazy bright! They made the garage and the outside light up! We ordered the XP version and it was an easy "plug and play!"
    Another great product we have of yours and very happy with!
    Thanks! (Posted on 4/21/14)

Backup LEDs are a direct replacement. Just change the bulb! You will not need any resistors or other accessories.

Remove your factory bulb

  1. 1. Access your backup bulb. You may need to pull back the trunk/cargo carpet and/or unscrew the visible nuts holding the light in.
  2. 2. Remove the socket from the tail light by twisting counterclockwise.
  3. 3. Remove the factory bulb by unclipping and pulling it out of the socket.


Install your new LED bulb

  1. 1. Plug new LED bulb into socket by pushing it into place.
  2. 2. Test the bulb to ensure proper function.
  3. 3. Insert socket back into tail light, and reassemble as necessary. That's it!

Worry-free warranty

  • -Full 3-year warranty on all products
  • -No waiting: we usually send new items out with a return label (US customers only)


You will get quick help from our trained staff for any issues.

All Stage Series products carry a limited 8-year warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 3-5 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured


International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:


30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.


Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.


Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.


To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!