PLEASE NOTE: This flasher is only compatible with Tacoma models that do not feature Daytime Running Lights (non-DTRL)
This is a replacement turn signal flasher module. It will eliminate fast turn signal blinking, known as hyperblinking, that occurs when you replace your turn signal bulbs with LEDs. It has been designed specifically for use with LEDs.
This module is specifically for your vehicle! It will be 100% plug and play. Just remove the factory flasher, and plug this one in.
SmartTap™ Flasher Relay
The SmartTap™ is a replacement turn signal flasher module that adds adjustable one-touch signaling and programmable hazard modes. Programming each mode is simple with the help of the included programming guide and the use of existing vehicle controls.
Tap-to-Signal: One-touch signaling is a convenient way to signal to other drivers when switching lanes. Simply tap the turn signal for a series of signal blinks.
Arrival and Departure Modes: When the lock or unlock button is pressed, the surrounding area will illuminate for better visibility when approaching or leaving the vehicle at night. The lighting time can be adjusted from 10-90 seconds for additional illumination, or disabled if desired.
Unique Hazard Functions: The SmartTap™ has built-in strobe, slo-mo and wig-wag hazard functions to help the vehicle stand out when the hazards are on. Apply these functions on their own, or together for a total of EIGHT unique hazard functions!
The SmartTap™ was designed and fully manufactured by Diode Dynamics, in St. Louis, Missouri. It is fully made in USA.
Why do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. When LED turn signal bulbs are installed, it lowers the load on the circuit too, because LEDs use less power. You get the fast blinking, known as "hyperblinking," even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out!
To slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. This is the unit that actually controls the blinking speed, and makes the "clicking" noise.
Top Notch Review by DR007
Value Quality Price
Definitely a great product to have when you change out all 4 of your blinkers to LEDs. It eliminates the hassle of adding resistors to the end where your bulb is. The flash rate is excellent and near factory rate. (Posted on 8/15/16)
Product fixed my problem! Now I can get my safety check. Thanks Toyota Tacoma forum! Review by Derek
Value Quality Price
I purchased this product and a Genuine Toyota Part for the same problem. Guess what? Genuine part didn't work and it cost 3 times the amount! (Posted on 7/11/16)
Excellent Product Review by mtnbkr
Value Quality Price
Purchased this product to stop hyper-blinking when I changed my turn signals to LED bulbs. Works perfectly and got my signals to work properly again. (Posted on 7/27/15)
Great Product for a Great Price Review by phoksam
Price Value Quality
Works as advertised. I Changed both my rears and front flashers to LED bulbs which cause rapid flashing when the turn signals were being used. after installation of this item, everything is working normal again.
(Posted on 6/3/14)
- - Full 3-year warranty on all products
- - No waiting: we usually send new items out with a return label (US customers only)
You will get quick help from our trained staff for any issues.
All Off-Road Lighting also carry a limited lifetime warranty.
For further details, please see our full article.
Domestic (US) Customers
- - Just $5 per order with our Diode Delivers program
- - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
- - USPS, for delivery in 2-4 days (on average)
- - Express services are available, see exact pricing at checkout
- - Fully Insured
- - We ship to all countries via standard mail
- - Usually around $10 for LEDs, or $25 for HIDs.
- - Choose your service on checkout to see exact prices:
- - USPS 1st Class: 2-5 weeks
- - USPS Priority: 1-2 weeks
- - Express EMS: 1 week
- - Please email us if you are unsure about shipping to your country.
You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.
Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.
If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:
30 day return policy. All customers have 30 days from the date of original order shipment to return items.
Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!
Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.
Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.
Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.
Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.
To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.
Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.
Alternatively, you can also send us a message, or give us a call!