{"title":"LED Wiring and Installation","description":null,"products":[{"product_id":"2-way-12v-led-toggle-switch","title":"2-Way 12V LED Toggle Switch","description":"\u003csection\u003e\u003cp\u003eThis switch can be used in any standard 12V application. It has a circular design, and can be clipped into place into a 3\/4\" hole.\u003c\/p\u003e \u003cp\u003eIt is intended to interrupt positive signal, and the LED can then be activated when the switch is turned on by connecting the switch to ground.\u003c\/p\u003e \u003cp\u003eThe connectors on the back are standard male spades, and standard insulated female spade connectors, such as those found on our store, are recommended for easy connection.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Green","offer_id":67693340885141,"sku":"DD3028","price":3.95,"currency_code":"USD","in_stock":true},{"title":"Amber","offer_id":67693340917909,"sku":"DD3029","price":3.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":67693340950677,"sku":"DD3030","price":3.95,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":67693340983445,"sku":"DD3031","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd3033_add-on_led_switch_-_amber.jpg?v=1791923733"},{"product_id":"add-on-foglight-wiring-harness","title":"Add-on Foglight Wiring Harness","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAllows you to add fog lights to your vehicle with factory-like operation.\u003c\/li\u003e \u003cli\u003eAvailable in H11, 9006, or 5202-size output connectors.\u003c\/li\u003e \u003cli\u003eCompatible with fog lamps, LED pods, and more.\u003c\/li\u003e \u003cli\u003eHigh-capacity 16AWG wiring, 15A waterproof fuse, and solid-state relay.\u003c\/li\u003e \u003cli\u003eWorks with factory-installed auxiliary switches.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eAdd fog lights to your vehicle.\u003c\/strong\u003e If you want to add fog lights to your vehicle, but you don't have factory wiring, this is the solution you need! Unlike other basic harnesses on the market, our Add-On Fog Harness allows your fog lights to operate automatically, just like you'd expect from the factory. By using an activation and deactivation wire, along with a toggle switch, this harness will turn your fog lights on automatically any time the headlights are turned on, and the switch is in the on position. This is much more convenient than manually flipping a switch on every time you want to use them!\u003c\/p\u003e \u003cp\u003eAvailable with H11, 9006, or 5202-size output connectors, this harness provides up to \u003cstrong\u003e12A of power\u003c\/strong\u003e, enough for most fog lamps or pods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWiring.\u003c\/strong\u003e We recommend connecting the Activation Input Wire to your sidemarker or low beam signal, so your fog lights can automatically turn on with your parking lights or low beams. Any time this activation signal is powered and the fog light switch is in the On state, the fog lights will be turned on.\u003c\/p\u003e \u003cp\u003e We recommend connecting the Deactivation Wire to your vehicle's high beam circuit. This will automatically disable the output any time your high beam is activated. Before wiring, please check local laws and regulations for proper activation and deactivation of the type of lamp you are powering with this harness.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAuxiliary switch compatible.\u003c\/strong\u003e If your vehicle came with an factory-installed auxiliary switch bank, you can use one of them as your fog light switch, instead of the toggle switch that's included. Simply connect an Auxiliary Switch output to the harness, using the included Power Input Wire.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"H8\/H9\/H11\/880\/881","offer_id":67693341278357,"sku":"DD4111","price":79.95,"currency_code":"USD","in_stock":true},{"title":"9005\/9006\/H10","offer_id":67693341311125,"sku":"DD4112","price":79.95,"currency_code":"USD","in_stock":true},{"title":"5202","offer_id":67693341343893,"sku":"DD4113","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4112_9006_add-on_foglight_wiring_harness_kit.jpg?v=1791923729"},{"product_id":"20mm-breather-patch-four","title":"20mm Breather Patch (four)","description":"\u003csection\u003e\u003cp\u003eAllows air to vent out of a headlight but blocks moisture from coming in. Prevents condensation buildup. Designed to be placed over a 1\/2 inch hole.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Pack of 4","offer_id":67693341376661,"sku":"DD4032","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4032_breather_patch_4.jpg?v=1791923719"},{"product_id":"stage-series-single-color-rock-light-m8-splitter-wire","title":"Stage Series Single-Color Rock Light M8 Splitter Wire","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way splitter wire for Stage Series Single-Color Rock Lights\u003c\/li\u003e\n\u003cli\u003eUses 3-pin M8 connectors for plug and play connection\u003c\/li\u003e\n\u003cli\u003eHeavy-duty 22 AWG wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdd extra connections. \u003c\/strong\u003eThis 2-way splitter wire can be used anywhere you would like to split 3-pin M8 power wires. This splitter wire is compatible with all Stage Series Single-Color Rock Lights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable. \u003c\/strong\u003eThis splitter is overmolded with a durable rubber where the wires split, to hold the wire junctions securely and prevent any chance of moisture or corrosion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug-and-play connection. \u003c\/strong\u003eThis splitter wire features one female connector and two male connectors, for plug-and-play installation. The cable used is 22AWG in size. Please be aware that you can only split a signal so many times: too many high-power LEDs connected through splitters will result in voltage drop to the LEDs\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67693341966485,"sku":"DD4140","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4140_splitter_2way_m8_3-pin.jpg?v=1791923721"},{"product_id":"heavy-duty-dual-output-2-pin-offroad-wiring-harness","title":"Heavy Duty Dual Output 2-Pin Offroad Wiring Harness","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowers Diode Dynamics Stage Series light bars and LED pods.\u003c\/li\u003e\n\u003cli\u003eConnects directly to the battery to power your light.\u003c\/li\u003e\n\u003cli\u003eHigh capacity 14AWG wiring.\u003c\/li\u003e\n\u003cli\u003eDeutsch DT output connector.\u003c\/li\u003e\n\u003cli\u003eBlack wire sheathing to protect cables.\u003c\/li\u003e\n\u003cli\u003e30A, waterproof fuse and 60 amp, 12V relay to safeguard the electrical systems in your light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStage Series.\u003c\/strong\u003e This harness is intended to be used with our Stage Series light bars and pods without backlight functionality. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. It features a two-way toggle switch, and uses high capacity 14AWG wiring and Deutsch DT connectors for simple plug-and-play installation.\u003c\/p\u003e\n\u003cp\u003eThis harness safely powers up to \u003cstrong\u003e25A of auxiliary lamps\u003c\/strong\u003e. Please refer to the current draw data below.  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSS3 Sport: 1.1A\u003c\/li\u003e\n\u003cli\u003eSS3 Pro: 2.7A\u003c\/li\u003e\n\u003cli\u003eSS3 Max: 3A\u003c\/li\u003e\n\u003cli\u003eSS6 Light Bar: 1.9A\u003c\/li\u003e\n\u003cli\u003eSS12 Light Bar: 4.2A\u003c\/li\u003e\n\u003cli\u003eSS18 Light Bar: 5.7A\u003c\/li\u003e\n\u003cli\u003eSS30 Light Bar: 9.8A\u003c\/li\u003e\n\u003cli\u003eSS42 Light Bar: 16A\u003c\/li\u003e\n\u003cli\u003eSS50 Light Bar: 18.5A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors, we assemble and engineer products in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67693343113365,"sku":"DD4045","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4045_offroad_harness_dual_output_2pin_b.jpg?v=1791923725"},{"product_id":"7-pin-to-10-pin-trailer-harness-adapter-one","title":"7-Pin to 10-Pin Trailer Harness Adapter (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConverts 10-pin trailer connector to 7-pin trailer connector\u003c\/li\u003e\n\u003cli\u003eHigh capacity 14AWG wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e Easily convert your 10-Pin trailer connection to a 7-Pin trailer connector using our adapter harness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors, we assemble and engineer products in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67693343309973,"sku":"DD4184","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4184_7_pin_to_10_pin_adapter_trailer_harness.jpg?v=1791923723"},{"product_id":"d1s-ballast-power-wires-input-and-output","title":"D1S Ballast Power Wires (Input and Output)","description":"\u003csection\u003e\u003cp\u003eThese power wires are designed specifically to be used with D1 HID ballasts.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67693343768725,"sku":"DD1194","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd1194_d1s_ballast_power_wires.jpg?v=1791923727"},{"product_id":"drl-harness-for-wrx-c-light","title":"DRL Harness for WRX C-Light","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows your Subaru WRX C-Light to also function as the DRL \u003c\/li\u003e\n\u003cli\u003eOEM connectors for simple plug-and-play installation\u003c\/li\u003e\n\u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAdded function.\u003c\/strong\u003e This harness was designed for use with Diode Dynamics \u003ca href=\"https:\/\/www.diodedynamics.com\/2015-2019-subaru-wrx-sti-c-light-switchback-led-halos.html\"\u003e2015-2021 Subaru WRX\/STi C-Light Switchback LED Boards\u003c\/a\u003e ONLY. This harness allows your C-Lights to also function as the daytime running light. It will deactivate the factory daytime running light, and instead power the C-Light. Your high beam function will still work as normal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation.\u003c\/strong\u003e Using OEM connectors, this kit is 100% plug-and-play and installs in minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliable Operation.\u003c\/strong\u003e This module has been designed with quality components, custom-tooled OEM-grade connectors, and includes embedded circuit protection, for high reliability over time. It is proudly assembled in St. Louis, Missouri by Diode Dynamics Manufacturing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67693344096405,"sku":"DD4055","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4055_drl_harness_wrx_c-light.jpg?v=1791923730"},{"product_id":"resistor-inline-194-pair","title":"Resistor Inline 194 (pair)","description":"\u003csection\u003e\u003cp\u003e\u003cstrong\u003eOverview \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThis is a pair of inline resistors, designed for use with 194, 168, or 921 size bulb applications, such as license plate and cargo lights.\u003c\/p\u003e \u003cp\u003eEach resistor draws 5 watts of power, the same as a standard 194 bulb. By drawing this extra power, it can resolve bulb out warnings that occur in some vehicles due to lower power consumption of LED bulb replacements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e: the base connectors are universal, and will not be an exact fit in your vehicle. The bulb holder side is a flexible rubber that is designed to fit loosely in a variety of sockets.\u003c\/p\u003e \u003cp\u003eIf you wish, you can cut off the connectors and wire these resistors inline, on your existing license plate bulb circuit. (Wiring and electrical experience required).\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67693344161941,"sku":"DD4050P","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4050p_194_inline_resistor_pair.jpg?v=1791923728"},{"product_id":"plastic-trim-removal-set-5-piece","title":"Plastic Trim Removal Set (5 piece)","description":"\u003csection\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEasily remove trim, molding, door panels, and fasteners\u003c\/li\u003e \u003cli\u003eDurable POM plastic construction prevents marring\u003c\/li\u003e \u003cli\u003eWorks on interior and exterior trim\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e \u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThis 5 piece plastic trim removal tool set has everything you need to easily remove trim, molding, door panels, and fasteners without scratching or marring your vehicle. The kit includes five different tools depending on your need. Each tool is made from durable POM plastic that will last for years to come.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67693344260245,"sku":"DD4094","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4094_plastic_trim_removal_tool_set_front_1.jpg?v=1791923729"},{"product_id":"universal-wire-hider","title":"Universal Wire Hider","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1-meter (39\") length, perfect for windshields and racks\u003c\/li\u003e\n\u003cli\u003eAccommodates wire up to 8.5mm in diameter\u003c\/li\u003e\n\u003cli\u003eUV-stable rubber stands up against the elements\u003c\/li\u003e\n\u003cli\u003eDouble-sided adhesive for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Universal Wire Hider is as straightforward as it sounds. With 3M VHB double-sided adhesive, it accommodates up to 1 meter of 8.5mm wire, which is perfect for hiding exposed wire running along your windshield, roof rack, or anywhere else on your vehicle. Featuring UV-stable EPDM rubber, you can easily trim it down to size as needed, and feel confident knowing it'll stand up against the elements for years to come.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67693345046677,"sku":"DD4199","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4199_universal_wire_hider_1m_w_3m_adhesive.jpg?v=1791923734"},{"product_id":"2-way-12v-add-on-led-switch-kit","title":"2-Way 12V Add-on LED Switch Kit","description":"\u003csection\u003e\u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eThis KIT includes an LED toggle switch, 15' of wires, and appropriate connectors to interrupt the + signal on any Diode Dynamics Accessory Harness. It also comes with a 2' ground wire to ground the switch.\u003c\/p\u003e \u003cp\u003eThe switch can be used in any standard 12V application. It has a circular design, and can be clipped into place into a 3\/4\" hole.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Green","offer_id":67723437768853,"sku":"DD3032","price":14.95,"currency_code":"USD","in_stock":true},{"title":"Amber","offer_id":67723437801621,"sku":"DD3033","price":14.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":67723437834389,"sku":"DD3034","price":14.95,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":67723437867157,"sku":"DD3035","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd3035_add-on_led_switch_-_blue.jpg?v=1792100828"},{"product_id":"3-pin-rock-light-m8-extension-wire","title":"3-Pin Rock Light M8 Extension Wire","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdds extra 1m, 3m, or 5m to connect to your rock lights\u003c\/li\u003e \u003cli\u003eCompatible with Stage Series Single-Color and Dual-Color Rock Lights\u003c\/li\u003e \u003cli\u003eUses 3-pin M8 connectors for plug and play connection\u003c\/li\u003e \u003cli\u003eHeavy-duty 22 AWG wire\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eAdd extra length. \u003c\/strong\u003eThis M8 extension wire can be used anywhere you need extra length to connect your rock lights. This extension wire uses 3-pin M8 connectors and is compatible with all Stage Series Single-Color and Dual-Color Rock Lights.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlug and play. \u003c\/strong\u003eThis extension wire features one male connector and one female connector, for plug-and-play extension.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"1 meter","offer_id":67723439145109,"sku":"DD4137","price":3.95,"currency_code":"USD","in_stock":true},{"title":"3 meter","offer_id":67723439177877,"sku":"DD4138","price":5.95,"currency_code":"USD","in_stock":true},{"title":"5 meter","offer_id":67723439210645,"sku":"DD4139","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4139_extension_wire_5m_1.jpg?v=1792100824"},{"product_id":"butyl-headlamp-sealant","title":"Butyl Headlamp Sealant","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAutomotive grade butyl sealant\u003c\/li\u003e \u003cli\u003eEasy to work with, no sticky mess\u003c\/li\u003e \u003cli\u003eStandard black color\u003c\/li\u003e \u003cli\u003e20 feet long (enough to reseal two large headlamps)\u003c\/li\u003e \u003cli\u003e7mm diameter, designed to fit directly in headlamp channels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eEasy to work with. \u003c\/strong\u003eProperly reseal any headlamp or tail lamp and protect against moisture ingress with Diode Dynamics Butyl Headlight Sealant! This new and improved sealant rope was designed specifically for headlamps, with a firmer composition than auto-store windshield glue. This makes it easy to work with, without causing a sticky mess. Each roll comes with 20 feet of butyl, enough to reseal two large headlamps.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProtection from moisture. \u003c\/strong\u003eUse it to reseal any headlamp after installing Diode Dynamics LED products! Warm it up a bit, place it into the headlight channel, and clamp together while heating, making sure the lens is fastened to the housing. With a little practice, you'll have a factory-quality seal, with quality butyl that will protect against moisture ingress for years to come.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Case of 10","offer_id":67723448746133,"sku":"DD4048X","price":174.95,"currency_code":"USD","in_stock":true},{"title":"Single","offer_id":68011552309397,"sku":"DD4048","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4048-butyl_kit-1_b.jpg?v=1792100846"},{"product_id":"deutsch-dt-2-pin-adapter-wires-pair","title":"Deutsch DT 2-Pin Adapter Wires (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConverts a DT-style plug to an H11, 9006, or 5202-size connector\u003c\/li\u003e \u003cli\u003eCompatible with SS3 Fog Light Kits\u003c\/li\u003e \u003cli\u003eHigh-capacity 18AWG wiring\u003c\/li\u003e \u003cli\u003eBlack insulation sleeve to protect wires\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003ePlug-and-Play.\u003c\/strong\u003e These Deutsch DT Adapter Wires allow you to connect a Deutsch DT-style connector to a factory H11, 9006, or 5202-size connector. These adapter wires are intended for use with our SS3 Fog Light Kits, to allow for plug and play installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"9006\/9012\/9005\/H10\/9145","offer_id":67723455922325,"sku":"DD4077","price":9.95,"currency_code":"USD","in_stock":true},{"title":"PSX26W","offer_id":67723455955093,"sku":"DD4117P","price":9.95,"currency_code":"USD","in_stock":true},{"title":"H11\/H8\/H9\/880\/881","offer_id":68011558764693,"sku":"DD4078","price":9.95,"currency_code":"USD","in_stock":true},{"title":"5202\/H16\/PSX24W","offer_id":68011558797461,"sku":"DD4079","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4078_h11_dt_adapter-pair-titled.jpg?v=1792100866"},{"product_id":"rgbw-m8-5-pin-splitter-wire-one","title":"RGBW M8 5-Pin Splitter Wire (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSplitter wire for all Diode Dynamics RGBW products\u003c\/li\u003e \u003cli\u003eM8 5-Pin connectors\u003c\/li\u003e \u003cli\u003e24AWG size conductors\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eAdd extra connections. \u003c\/strong\u003eThis RGBW splitter wire can be used anywhere you would like to split M8 5-Pin style RGBW power wires. This splitter wire is compatible with all Diode Dynamics RGBW products.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDurable.\u003c\/strong\u003e This splitter is overmolded with a durable rubber where the wires split, to hold the wire junctions securely and prevent any chance of moisture or corrosion.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlug-and-play connection. \u003c\/strong\u003eThis splitter wire features one female connector and two male connectors, for plug-and-play installation. The cable used is 24AWG in size. Please be aware that you can only split a signal so many times: too many high-power LEDs connected through splitters will result in voltage drop to the LEDs. If you are using a Diode Dynamics controller, we recommend using only one splitter, to add a few extra connections.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"4-Way","offer_id":67723468144789,"sku":"DD4088","price":9.95,"currency_code":"USD","in_stock":true},{"title":"2-Way","offer_id":67723468177557,"sku":"DD4141","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4141_splitter_2_way_m8_5-pin_1.jpg?v=1792100888"},{"product_id":"rgbw-m8-5-pin-extension-wire","title":"RGBW M8 5-Pin Extension Wire","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eExtension wire for Diode Dynamics RGBW products with M8 connectors\u003c\/li\u003e \u003cli\u003ePress-fit M8 connectors\u003c\/li\u003e \u003cli\u003e24AWG wire\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eAdd extra length. \u003c\/strong\u003eThis RGBW extension wire can be used anywhere where you need extra length to connect your LED Driver to your RGBW controller. This extension wire uses M8 connectors and is compatible with Diode Dynamics RGBW products that also use M8 connectors. If your product uses JST connectors, please check out our RGBW JST Extension Wire or our JST-to-M8 Adapter Wires.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlug and play. \u003c\/strong\u003eThis extension wire features one male M8 connector and one female M8 connector, for plug-and-play extension with Diode Dynamics RGBW products that use M8 connectors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"5 meter","offer_id":67723468406933,"sku":"DD4085","price":7.95,"currency_code":"USD","in_stock":true},{"title":"1 meter","offer_id":68011571118229,"sku":"DD4083","price":3.95,"currency_code":"USD","in_stock":true},{"title":"3 meter","offer_id":68011571150997,"sku":"DD4084","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4083_extension_wire_m8_1m_1_c6571c0b-2c34-4bb2-aa52-d7e60c406e3d.jpg?v=1792100883"},{"product_id":"3-pin-rock-light-m8-wiring-harness","title":"3-Pin Rock Light M8 Wiring Harness","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowers Stage Series Single-Color and Dual-Color LED Rock Lights.\u003c\/li\u003e\n\u003cli\u003eConnects directly to the battery to power your rock lights.\u003c\/li\u003e\n\u003cli\u003eFour M8 output connectors.\u003c\/li\u003e\n\u003cli\u003e10A, waterproof mini-fuse to safeguard the electrical systems in your light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower your Rock Lights. \u003c\/strong\u003eThis harness is intended to be used with our Stage Series Single-Color and Dual-Color LED Rock Lights. This harness connects directly to your vehicle's battery and allows you to power your rock lights. It features a three-way switch and uses high-capacity 16 AWG wiring and four M8 3-pin connectors for simple plug-and-play installation.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723514118293,"sku":"DD4142","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4142_rocklight_single_color_main_harness_1.jpg?v=1792100963"},{"product_id":"5202-to-h11-adapter-wires-pair","title":"5202-to-H11 Adapter Wires (pair)","description":"\u003csection\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAdapter wires used to convert a PSX24W or 5202-size socket into an H11-size socket.\u003c\/li\u003e \u003cli\u003eMale PSX-size connector on one side, female H11-size connector on the other side.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723514183829,"sku":"DD4052","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4052_5202_male_to_h11_female_adapter_pair.jpg?v=1792100964"},{"product_id":"5202-dt-2-pin-adapter-wires-pair","title":"5202 DT 2-Pin Adapter Wires (pair)","description":"\u003csection\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConverts a DT-style plug to an H11, 9006, or 5202-size connector\u003c\/li\u003e \u003cli\u003eCompatible with SS3 Fog Light Kits\u003c\/li\u003e \u003cli\u003eHigh-capacity 18AWG wiring\u003c\/li\u003e \u003cli\u003eBlack insulation sleeve to protect wires\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e \u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlug-and-Play.\u003c\/strong\u003e These Deutsch DT Adapter Wires allow you to connect a Deutsch DT-style connector to a factory H11, 9006, or 5202-size connector. These adapter wires are intended for use with our SS3 Fog Light Kits, to allow for plug and play installation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"5202\/H16\/PSX24W","offer_id":67723514216597,"sku":"DD4079","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4079_5202_dt_adapter-pair-side.jpg?v=1792100964"},{"product_id":"add-on-dt-2-pin-foglight-wiring-harness","title":"Add-on DT 2-Pin Foglight Wiring Harness","description":"\u003cp\u003eOverview. Add fog lights to your vehicle. If you want to add fog lights to your vehicle, but you don't have factory wiring, this is the solution you need! Unlike other basic harnesses on the market, our Add-On Fog Harness allows your fog lights to operate automatically, just like you'd expect from the factory. By using an activation and deactivation wire, along with a toggle switch, this harness will turn your fog lights on automatically any time the headlights are turned on, and the switch is in the on position. This is much more convenient than manually flipping a switch on every time you want to use them!\u003c\/p\u003e\u003cp\u003eThis harness is intended to be used with Diode Dynamics Stage Series LED Pods without backlight functionality, and can safely provide up to 10A of power.\u003c\/p\u003e\u003cp\u003eWiring. We recommend connecting the Activation Input Wire to your sidemarker or low beam signal, so your fog lights can automatically turn on with your parking lights or low beams. Any time this activation signal is powered and the fog light switch is in the On state, the fog lights will be turned on.\u003c\/p\u003e\u003cp\u003e We recommend connecting the Deactivation Wire to your vehicle's high beam circuit. This will automatically disable the output any time your high beam is activated.\u003c\/p\u003e\u003cp\u003eAuxiliary switch compatible. If your vehicle came with a factory-installed auxiliary switch bank, you can use one of them as your fog light switch, instead of the toggle switch that's included. Simply connect an Auxiliary Switch output to the harness, using the included Power Input Wire.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723514413205,"sku":"DD4109","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4109_dt_2p_add-on_foglight_harness_kit.jpg?v=1792100963"},{"product_id":"add-on-dt-4-pin-foglight-wiring-harness","title":"Add-on DT 4-Pin Foglight Wiring Harness","description":"\u003cp\u003eOverview. Add fog lights to your vehicle. If you want to add fog lights to your vehicle, but you don't have factory wiring, this is the solution you need! Unlike other basic harnesses on the market, our Add-On Fog Harness allows your fog lights to operate automatically, just like you'd expect from the factory. By using an activation and deactivation wire, along with a toggle switch, this harness will turn your fog lights on automatically any time the headlights are turned on, and the switch is in the on position. This is much more convenient than manually flipping a switch on every time you want to use them!\u003c\/p\u003e\u003cp\u003eThis harness is intended to be used with Diode Dynamics Stage Series LED Pods with backlight functionality, and can safely provide up to 10A of power.\u003c\/p\u003e\u003cp\u003eWiring. We recommend connecting the Activation Input Wire to your sidemarker or low beam signal, so your fog lights can automatically turn on with your parking lights or low beams. Any time this activation signal is powered and the fog light switch is in the On state, the fog lights will be turned on.\u003c\/p\u003e\u003cp\u003e We recommend connecting the Deactivation Wire to your vehicle's high beam circuit. This will automatically disable the output any time your high beam is activated.\u003c\/p\u003e\u003cp\u003eFinally, we recommend connecting the Backlight Activation Wire to a fused 12V source to trigger the backlight feature, such as the parking light or running light. Before wiring, please check local laws and regulations for proper activation and deactivation of the type of lamp you are powering with this harness.\u003c\/p\u003e\u003cp\u003eAuxiliary switch compatible. If your vehicle came with a factory-installed auxiliary switch bank, you can use one of them as your fog light switch, instead of the toggle switch that's included. Simply connect an Auxiliary Switch output to the harness, using the included Power Input Wire.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723515494549,"sku":"DD4110","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4110_dt_4p_add-on_foglight_wiring_harness_with_backlight_detail_kit.jpg?v=1792100965"},{"product_id":"butyl-headlamp-sealant-one","title":"Butyl Headlamp Sealant (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive grade butyl sealant\u003c\/li\u003e\n\u003cli\u003eEasy to work with, no sticky mess\u003c\/li\u003e\n\u003cli\u003eStandard black color\u003c\/li\u003e\n\u003cli\u003e20 feet long (enough to reseal two large headlamps)\u003c\/li\u003e\n\u003cli\u003e7mm diameter, designed to fit directly in headlamp channels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to work with. \u003c\/strong\u003eProperly reseal any headlamp or tail lamp and protect against moisture ingress with Diode Dynamics Butyl Headlight Sealant! This new and improved sealant rope was designed specifically for headlamps, with a firmer composition than auto-store windshield glue. This makes it easy to work with, without causing a sticky mess. Each roll comes with 20 feet of butyl, enough to reseal two large headlamps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtection from moisture. \u003c\/strong\u003eUse it to reseal any headlamp after installing Diode Dynamics LED products! Warm it up a bit, place it into the headlight channel, and clamp together while heating, making sure the lens is fastened to the housing. With a little practice, you'll have a factory-quality seal, with quality butyl that will protect against moisture ingress between the lens and housing for years to come.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Single","offer_id":67723516313749,"sku":"DD4048","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4048-butyl_kit-1_2.jpg?v=1792100969"},{"product_id":"dc-to-dt-adapter-one","title":"DC-to-DT Adapter (one)","description":"\u003csection\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConverts a DC connector into a DT connector\u003c\/li\u003e \u003cli\u003eCompatible with Diode Dynamics RGBW LED Strip Kits\u003c\/li\u003e \u003cli\u003e20AWG wire\u003c\/li\u003e \u003cli\u003eBlack insulation sleeve to protect wires\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e \u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlug-and-Play.\u003c\/strong\u003e This DC-to-DT Adapter Wire allows you to connect a DC-style connector to a DT-style connector. This adapter wire is intended for use with our RGBW LED Strip Kits, to allow for plug and play installation between the controller and the wiring harness.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723517395093,"sku":"DD4086","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/we0043_dc_to_dt_adapter.jpg?v=1792100980"},{"product_id":"deutsch-connector-kit-2-pin-16-22-gauge","title":"Deutsch Connector Kit, 2-Pin (16-22 Gauge)","description":"\u003csection\u003e\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eDeutsch Connector Kit W\/housing, Terminals, Pins, and Seals 16-22 Gauge Crimp Style Terminals\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723517526165,"sku":"DD4038","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4038_deutsch_dt_kit_2pin_16-22_awg_kit.jpg?v=1792100983"},{"product_id":"drl-warning-canceller-pair","title":"DRL Warning Canceller (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrevents flickering and bulb out warnings on many vehicles when HIDs are installed.\u003c\/li\u003e\n\u003cli\u003eOEM connectors for simple plug-and-play installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eSome vehicle manufacturers, such as BMW and Audi, use alternating current on new vehicles to extend the lifetime of halogen bulbs. This is also often the case on DRLs, to achieve a lower brightness level during the day. Specifically, this is called Pulse Width Modulation.\u003c\/p\u003e\n\u003cp\u003eHID conversion kits require continuous current to operate correctly. If HIDs are installed onto a DRL circuit, the lights will flicker very quickly when the vehicle is turned on. If you have a relay, it will buzz loudly. The solution for this is the Warning Canceller Module.\u003c\/p\u003e\n\u003cp\u003eThe HID Warning Canceller Module is also known as an HID Error Message Canceller, HID Decoder, HID Anti Flicker Capacitor, or Canbus Killer, because it will also eliminate \"bulb out\" or \"bulb failure\" warnings in most Mercedes, BMW, Audi, VW, and other cars when HIDs are installed.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723517591701,"sku":"DD1188","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/hid_drl_canceller-pair_1.jpg?v=1792100979"},{"product_id":"drl-warning-canceller-single","title":"DRL Warning Canceller (single)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrevents flickering and bulb out warnings on many vehicles when HIDs are installed.\u003c\/li\u003e\n\u003cli\u003eOEM connectors for simple plug-and-play installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eSome vehicle manufacturers, such as BMW and Audi, use alternating current on new vehicles to extend the lifetime of halogen bulbs. This is also often the case on DRLs, to achieve a lower brightness level during the day. Specifically, this is called Pulse Width Modulation.\u003c\/p\u003e\n\u003cp\u003eHID conversion kits require continuous current to operate correctly. If HIDs are installed onto a DRL circuit, the lights will flicker very quickly when the vehicle is turned on. If you have a relay, it will buzz loudly. The solution for this is the Warning Canceller Module.\u003c\/p\u003e\n\u003cp\u003eThe HID Warning Canceller Module is also known as an HID Error Message Canceller, HID Decoder, HID Anti Flicker Capacitor, or Canbus Killer, because it will also eliminate \"bulb out\" or \"bulb failure\" warnings in most Mercedes, BMW, Audi, VW, and other cars when HIDs are installed.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723517624469,"sku":"DD1188S","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/hid_drl_canceller2_web.jpg?v=1792100984"},{"product_id":"deutsch-connector-kit-2-pin-12-14-gauge","title":"Deutsch Connector Kit, 2-Pin (12-14 Gauge)","description":"\u003csection\u003e\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eDeutsch Connector Kit W\/housing, Terminals, Pins, and Seals 12-14 Gauge Crimp Style Terminals\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723517657237,"sku":"DD4039","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4039_deutsch_dtp_kit_2-pin_angled.jpg?v=1792100983"},{"product_id":"dodge-hyperblink-fix-pair","title":"Dodge Hyperblink Fix (pair)","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNo more errors. \u003c\/strong\u003eDodge and Ram vehicles with factory-installed LEDs require a \"fault\" data feedback signal. If you remove or modify the factory turn signal in either the front or rear, you'll need to replicate that signal, or else you'll experience hyperblinking and bulb out warnings.\u003c\/p\u003e \u003cp\u003eThese are small modules that provide the required \"fault\" signal. Simply connect the module to turn signal power, ground, and the fault circuit, and this module will deliver the signal your vehicle computer is looking for, to eliminate any errors.\u003c\/p\u003e \u003cp\u003eThese are not for use in vehicles with factory-installed incandescent turn signals. Resistors are required for vehicles with incandescent factory-installed signals. This is only necessary for vehicles with factory-installed LED turn signals.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eYour order includes\u003c\/strong\u003e one pair of modules. They can be used in either the front or rear. If you have removed or modified both front and rear factory LED turn signal lamps, you will need two pairs (four modules total).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation. \u003c\/strong\u003eOnce the headlamp connectors have been accessed, tap the following wires.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConnect the BLACK wire to GROUND.\u003c\/li\u003e \u003cli\u003eConnect the WHITE wire to TURN SIGNAL POSITIVE.\u003c\/li\u003e \u003cli\u003eConnect the BLUE wire to FAULT CIRCUIT.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723518115989,"sku":"DD3052","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd3052_dodge_hyperblink_fix__pair__kit.jpg?v=1792100983"},{"product_id":"heavy-duty-single-output-2-pin-offroad-wiring-harness","title":"Heavy Duty Single Output 2-Pin Offroad Wiring Harness","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowers Diode Dynamics Stage Series light bars and LED pods.\u003c\/li\u003e\n\u003cli\u003eConnects directly to the battery to power your light.\u003c\/li\u003e\n\u003cli\u003eHigh capacity 14AWG wiring.\u003c\/li\u003e\n\u003cli\u003eDeutsch DT output connector.\u003c\/li\u003e\n\u003cli\u003eBlack wire sheathing to protect cables.\u003c\/li\u003e\n\u003cli\u003e30A, waterproof fuse and 60 amp, 12V relay to safeguard the electrical systems in your light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStage Series.\u003c\/strong\u003e This harness is intended to be used with our Stage Series light bars and pods without backlight functionality. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. It features a two-way toggle switch, and uses high capacity 14AWG wiring and Deutsch DT connectors for simple plug-and-play installation.\u003c\/p\u003e\n\u003cp\u003eThis harness safely powers up to \u003cstrong\u003e25A of auxiliary lamps\u003c\/strong\u003e. Please refer to the current draw data below.  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSS3 Sport: 1.1A\u003c\/li\u003e\n\u003cli\u003eSS3 Pro: 2.7A\u003c\/li\u003e\n\u003cli\u003eSS3 Max: 3A\u003c\/li\u003e\n\u003cli\u003eSS6 Light Bar: 1.9A\u003c\/li\u003e\n\u003cli\u003eSS12 Light Bar: 4.2A\u003c\/li\u003e\n\u003cli\u003eSS18 Light Bar: 5.7A\u003c\/li\u003e\n\u003cli\u003eSS30 Light Bar: 9.8A\u003c\/li\u003e\n\u003cli\u003eSS42 Light Bar: 16A\u003c\/li\u003e\n\u003cli\u003eSS50 Light Bar: 18.5A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors, we assemble and engineer products in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723521622165,"sku":"DD4031","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4031_2_pin_heavy_duty_harness_1.jpg?v=1792100985"},{"product_id":"led-resistor-kit-four","title":"LED Resistor Kit (four)","description":"\u003csection\u003e\u003cp\u003eWhen you replace incandescant turn signal bulbs with LEDs in most vehicles, the vehicle will start hyperblinking because the LED uses much less power, and the vehicle thinks the bulb is out. You can use these resistors to fix the problem of hyperblinking when you convert to LED bulbs.\u003c\/p\u003e\n\u003cp\u003eDiode Dynamics resistors have extra-long 8\" leads for easier installation, and have a rating of 50w, 6ohm. This is usually enough to compensate for one bulb. If you are installing four LED turn signals (front and rear) we recommend four total resistors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded with your order:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e 4 resistors\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e 8 quick-splice \"scotch-lock\" connectors\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eInstallation: Connect one side of the resistor to the positive turn signal wire, and the other side to negative (ground) with included connectors.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723521654933,"sku":"DD4025Q","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4025q_resistor_kit_4_b_n.jpg?v=1792100988"},{"product_id":"jst-male-to-m8-female-adapters-pair","title":"JST Male to M8 Female Adapters (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConverts a JST Female connector into an M8 Female connector\u003c\/li\u003e\n\u003cli\u003eCompatible with Diode Dynamics RGBW Bluetooth controllers\u003c\/li\u003e\n\u003cli\u003eHigh-capacity 24AWG wiring\u003c\/li\u003e\n\u003cli\u003eBlack insulation sleeve to protect wires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlug-and-Play.\u003c\/strong\u003e These JST Male to M8 Female Adapter Wires allow you to convert a female JST-style connector to a female M8-style connector. These adapter wires are intended for use with our RGBW Bluetooth controllers, to allow for plug and play installation. If you are looking to connect an older Bluetooth controller with JST connectors to a Diode Dynamics driver with M8 connectors, this is the perfect solution!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723521687701,"sku":"DD4089","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4089_jst_male_m8_female_adapters_pair.jpg?v=1792100996"},{"product_id":"jst-female-to-m8-male-adapters-pair","title":"JST Female to M8 Male Adapters (pair)","description":"\u003csection\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eConverts a JST Male connector into an M8 Male connector\u003c\/li\u003e \u003cli\u003eCompatible with Diode Dynamics RGBW Bluetooth controllers\u003c\/li\u003e \u003cli\u003eHigh-capacity 24AWG wiring\u003c\/li\u003e \u003cli\u003eBlack insulation sleeve to protect wires\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e \u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlug-and-Play.\u003c\/strong\u003e These JST Female to M8 Male Adapter Wires allow you to convert a male JST-style connector to a male M8-style connector. These adapter wires are intended for use with our RGBW Bluetooth controllers, to allow for plug and play installation. If you are looking to connect our Bluetooth Controller with M8 connectors to a driver with JST connectors, this is the perfect solution! \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723521753237,"sku":"DD4081","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/bluetooth_rgbw_m8_1in_controller-adapters.jpg?v=1792100991"},{"product_id":"light-duty-dual-output-2-pin-offroad-wiring-harness","title":"Light Duty Dual Output 2-Pin Offroad Wiring Harness","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowers Diode Dynamics Stage Series light bars and LED pods.\u003c\/li\u003e\n\u003cli\u003eConnects directly to the battery to power your light.\u003c\/li\u003e\n\u003cli\u003eHigh capacity 18AWG wiring.\u003c\/li\u003e\n\u003cli\u003eDual Deutsch DT output connectors.\u003c\/li\u003e\n\u003cli\u003e15A, waterproof fuse to safeguard the electrical systems in your light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStage Series.\u003c\/strong\u003e This harness is intended to be used with our Stage Series light bars and pods without backlight functionality. This harness connects directly to your vehicle's battery and allows you to power your offroad lighting. It features a two-way toggle switch, and uses high capacity 18AWG wiring and Deutsch DT connectors for simple plug-and-play installation.\u003c\/p\u003e\n\u003cp\u003eThis harness safely powers up to \u003cstrong\u003e6A of auxiliary lamps\u003c\/strong\u003e. Please refer to the current draw data below.  \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSS3 Sport: 1.1A\u003c\/li\u003e\n\u003cli\u003eSS3 Pro: 2.7A\u003c\/li\u003e\n\u003cli\u003eSS3 Max: 3A\u003c\/li\u003e\n\u003cli\u003eSS6 Light Bar: 1.9A\u003c\/li\u003e\n\u003cli\u003eSS12 Light Bar: 4.2A\u003c\/li\u003e\n\u003cli\u003eSS18 Light Bar: 5.7A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors, we assemble and engineer products in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723521818773,"sku":"DD4033","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4033_light_duty_dual_output_offroad_wiring_harness_1.jpg?v=1792100994"},{"product_id":"rgbw-5-pin-rock-light-dt-wiring-harness","title":"RGBW 5-Pin Rock Light DT Wiring Harness","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowers Stage Series RGBW Rock Lights.\u003c\/li\u003e\n\u003cli\u003eConnects directly to the battery and RGBW controller.\u003c\/li\u003e\n\u003cli\u003eDeutsch DT output connector.\u003c\/li\u003e\n\u003cli\u003e10A, waterproof mini-fuse to safeguard the electrical systems in your light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower your RGBW Rock Lights. \u003c\/strong\u003eThis harness is intended to be used with our Stage Series RGBW LED Rock Lights. This harness connects directly to your vehicle's battery and RGBW controller to power your rock lights. It features a two-way switch and uses high-capacity 16 AWG wiring and a Deutsch DT output connector for simple plug-and-play installation.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723522244757,"sku":"DD4143","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4143_rocklight_rgbw_main_harness_update.jpg?v=1792100998"},{"product_id":"rectangular-3-way-12v-rocker-switch","title":"Rectangular 3-Way 12V Rocker Switch","description":"\u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eClean, OEM-Style Control.\u003c\/strong\u003e The Diode Dynamics Rectangular 3-Way 12V Rocker Switch gives you clean, factory-style control of your auxiliary lighting. Featuring a rectangular design with red illumination, this switch is a great upgrade for SXS and powersports applications using standard switch openings.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUniversal Fitment.\u003c\/strong\u003e This switch is designed to fit standard 39mm x 21mm rectangular switch openings, commonly found in universal dash switch panels, blank switch housings, and many powersports switch locations. It is a great option for Polaris RZR, Honda Talon, Kawasaki KRX, aftermarket UTV switch panels, standalone accessory switch mounts, and custom fabricated panels using this standard switch footprint.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eThree-Position Functionality.\u003c\/strong\u003e The three-position rocker design allows you to control your lighting’s backlight, off, and main beam functions from a single switch. This makes it ideal for Diode Dynamics lighting setups with backlight functionality, giving you simple control in a clean, integrated package.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723522343061,"sku":"DD4225","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4225_rectangular_switch_3way_detail.jpg?v=1792100997"},{"product_id":"rgb-fog-warning-canceller-one","title":"RGB Fog Warning Canceller (one)","description":"\u003csection\u003e\u003cp\u003e\u003cstrong\u003eOverview.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eRGB Fog Warning Canceller Module\u003c\/p\u003e \u003cp\u003eSome vehicle manufacturers such as BMW and Audi are using alternating current on new cars to extend the lifetime of halogen bulbs. This is also often the case on DRLs, to achieve a lower brightness during the day. Specifically, this is called Pulse Width Modulation.\u003c\/p\u003e \u003cp\u003eSome Multicolor Fog Light kits require continuous current to operate correctly. If installed on a circuit with alternating current, the lights will flicker very quickly when the vehicle is turned on. The solution for this is the RGB Fog Warning Canceller Module.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTo regulate the signal, you will need one module.\u003c\/strong\u003e\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723523195029,"sku":"DD4044","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4044_rgb_fog_warning_canceller.jpg?v=1792101002"},{"product_id":"t-tap-kit-8-count","title":"T-Tap Kit (8 count)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes eight 18-22 AWG T-Tap female connectors.\u003c\/li\u003e\n\u003cli\u003eAllows for quick and easy electrical connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Electrical Connection.\u003c\/strong\u003e T-Tap connectors allow you to connect to an electrical circuit without having to cut or strip the wires on your vehicle. Simply close the T-Tap over the wire and crimp down using pliers to make the connection.   \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723535417493,"sku":"DD4065","price":2.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4065_t-tap_8_count.jpg?v=1792101018"},{"product_id":"20mm-breather-patch","title":"20mm Breather Patch","description":"\u003csection\u003e\u003cp\u003eKeep it dry! These breather patches allow air to vent out of a headlight, but block moisture from coming in. This is a big help in preventing condensation from building up inside.\u003c\/p\u003e \u003cp\u003eAvailable in packs of 4 or 40 units, the circle stickers are 20mm in diameter, or just over 3\/4 inches. They are designed to be placed over a 1\/2 inch hole. We recommend using two per lamp to provide maximum airflow.\u003c\/p\u003e \u003cp\u003eTo install, drill a 1\/2 inch hole on your lamp. We recommend placing at the side, but you can choose anywhere that has a flat surface. Clean the hole and stick on the patch, holding firmly for 5 seconds to ensure good adhesion. That's it!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Pack of 4","offer_id":68011549458581,"sku":"DD4032","price":4.95,"currency_code":"USD","in_stock":true},{"title":"Pack of 40","offer_id":68011549491349,"sku":"DD4034","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4034_breatherpatch_kit_b_bd1e1329-ef4c-4a80-b200-0f8c7f13cb43.jpg?v=1792515163"},{"product_id":"rgbw-4-way-splitter-wire","title":"RGBW 4-Way Splitter Wire","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e4-way splitter wire for all Diode Dynamics RGBW products\u003c\/li\u003e \u003cli\u003eAvailable with JST or M8 connectors\u003c\/li\u003e \u003cli\u003e24AWG size conductors\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eAdd extra connections. \u003c\/strong\u003eThis RGBW 4-way splitter wire can be used anywhere you would like to split 5-pin JST or M8 style RGBW power wires. This splitter wire is compatible with all Diode Dynamics RGBW products.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDurable.\u003c\/strong\u003e This splitter is overmolded with a durable rubber where the wires split, to hold the wire junctions securely and prevent any chance of moisture or corrosion.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlug-and-play connection. \u003c\/strong\u003eThis splitter wire features one female connector and four male connectors, for plug-and-play installation. The cable used is 24AWG in size. Please be aware that you can only split a signal so many times: too many high power LEDs connected through splitters will result in voltage drop to the LEDs. If you are using a Diode Dynamics controller, we recommend using only one splitter, to add a few extra connections.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"M8","offer_id":68011571019925,"sku":"DD4088","price":9.95,"currency_code":"USD","in_stock":true},{"title":"JST","offer_id":68258265858197,"sku":"WE0022","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4088_splitter_4_way_m8_1.jpg?v=1792515238"},{"product_id":"dt-4-pin-extension-wire-3m","title":"DT 4-Pin Extension Wire 3m","description":"\u003csection\u003e\u003cp\u003e\u003cstrong\u003eOverview \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAdd extra length. \u003c\/strong\u003eThis DT extension wire can be used anywhere where you need extra length to connect your auxiliary lighting to the wiring harness. This extension wire uses standard DT 4-pin connectors, and is compatible with all Diode Dynamics Stage Series LED Pods with backlight functionality. This harness features over-molded connectors with an embossed Diode Dynamics logo, providing strain relief and protection from the elements.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlug and play. \u003c\/strong\u003eThis extension wire features one male connector and one female connector, for plug-and-play extension.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"3 meter","offer_id":68041040035989,"sku":"DD4099","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4099_dt_4_pin_3m_extension_wire.jpg?v=1792698240"},{"product_id":"rgbw-m8-5-pin-2-way-splitter","title":"RGBW M8 5-Pin 2-Way Splitter","description":"\u003csection\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2-way splitter wire for all Diode Dynamics RGBW products\u003c\/li\u003e \u003cli\u003eM8 5-Pin connectors\u003c\/li\u003e \u003cli\u003e24AWG size conductors\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e \u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAdd extra connections. \u003c\/strong\u003eThis RGBW 2-way splitter wire can be used anywhere you would like to split M8 5-Pin style RGBW power wires. This splitter wire is compatible with all Diode Dynamics RGBW products.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDurable.\u003c\/strong\u003e This splitter is overmolded with a durable rubber where the wires split, to hold the wire junctions securely and prevent any chance of moisture or corrosion.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlug-and-play connection. \u003c\/strong\u003eThis splitter wire features one female connector and two male connectors, for plug-and-play installation. The cable used is 24AWG in size. Please be aware that you can only split a signal so many times: too many high-power LEDs connected through splitters will result in voltage drop to the LEDs. If you are using a Diode Dynamics controller, we recommend using only one splitter, to add a few extra connections.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"2-Way","offer_id":68041065005205,"sku":"DD4141","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd4141_splitter_2_way_m8_5-pin.jpg?v=1792698391"},{"product_id":"18-22-awg-female-insulated-25-spade-connector","title":"18-22 AWG Female Insulated .25\" Spade Connector","description":"\u003csection\u003e\u003cp\u003eThis is an insulated 18-22 AWG .25\" female spade connector.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":68258258387093,"sku":"CS0002","price":0.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/b33e2b276d7024edc79ef3bcfe2e82fd.jpg?v=1794563781"},{"product_id":"18-22-awg-quick-splice-connector","title":"18-22 AWG Quick-Splice Connector","description":"\u003csection\u003e\u003cp\u003eThese connectors are included with a number of our wiring kits, as they can be used to easily tap into another wire to acquire power. They are also called scotch-locks. These should be used for wires ranging from 18 to 22 AWG.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":68258258452629,"sku":"CS0004","price":0.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/5bfed1b2aff4ba1c31d0a8fd35001b56.jpg?v=1794563787"},{"product_id":"18-22-awg-male-insulated-25-spade-connector","title":"18-22 AWG Male Insulated .25\" Spade Connector","description":"\u003csection\u003e\u003cp\u003eThis is an insulated 18-22 AWG .25\" male spade connector.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":68258258485397,"sku":"CS0001","price":0.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2e56a808ebd39d9c87350bb4067d1118.jpg?v=1794563793"},{"product_id":"2-way-dc-splitter","title":"2-way DC Splitter","description":"\u003csection\u003e\u003cp\u003eThis can be used to split 12V power. It has a 5.5mm female barrel input, with two 5.5mm male outputs.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":68258258550933,"sku":"WE0011","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/c6e802f5851e2e4a010d9aa9218fabc8.jpg?v=1794563789"},{"product_id":"2-way-rgb-splitter","title":"2-way RGB Splitter","description":"\u003csection\u003e\u003cp\u003eThis can be used to split 4-pin RGB power wires. It has a 4-pin female input, with two 4-pin male outputs.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":68258258649237,"sku":"WE0013","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/c882e25171df6c79d59993b887112bd2.jpg?v=1794563798"},{"product_id":"3-way-12v-rocker-switch","title":"3-Way 12V Rocker Switch","description":"\u003csection\u003e\u003cp\u003eThis switch can be used in any standard 12V application. It has a circular design, and can be clipped into place into a 3\/4\" hole.\u003c\/p\u003e \u003cp\u003eControl multiple functions with a single switch using this 3-way rocker design. Featuring a center-off position, this switch interrupts the positive signal and allows you to route power to one of two separate outputs by rocking it forward or backward.\u003c\/p\u003e \u003cp\u003eThe connectors on the back are standard male spades, and standard insulated female spade connectors are recommended for easy connection.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":68258258813077,"sku":"DD3072","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/0ea297aa9794e024a781aff12969052a.jpg?v=1794563802"},{"product_id":"4-way-dc-splitter","title":"4-way DC Splitter","description":"\u003csection\u003e\u003cp\u003eThis can be used to split 12V power. It has a 5.5mm female barrel input, with four 5.5mm male outputs.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":68258259271829,"sku":"DD4063","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/0c19105880c9b139d9b06a1cbc0f59c9.jpg?v=1794563803"},{"product_id":"4-way-rgb-splitter","title":"4-way RGB Splitter","description":"\u003csection\u003e\u003cp\u003eThis can be used to split 4-pin RGB power wires. It has a 4-pin female input, with four 4-pin male outputs.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":68258259304597,"sku":"WE0014","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/9630c2f506590243053c5832223f2733.jpg?v=1794563802"}],"url":"https:\/\/www.diodedynamics.com\/collections\/wiring-and-install.oembed","provider":"Diode Dynamics LLC","version":"1.0","type":"link"}