{"title":"2003-2005 Toyota 4Runner LED Lighting Upgrades","description":null,"products":[{"product_id":"interior-led-conversion-kit-for-2003-2009-toyota-4runner","title":"Interior LED Conversion Kit for 2003-2009 Toyota 4Runner","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdd a modern, cool white appearance.\u003c\/li\u003e \u003cli\u003eIncreased output with LED bulbs.\u003c\/li\u003e \u003cli\u003eIncludes LED replacements for all interior incandescent bulbs.\u003c\/li\u003e \u003cli\u003ePlug-and-play, simple installation.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eIncrease your light output and add a modern appearance to your Toyota 4Runner with our Interior LED Conversion Kit! From the factory, the interior lighting on the 4Runner leaves much to be desired with a dated appearance and lackluster performance. By replacing your outdated halogen bulbs with LEDs, you’ll give your vehicle a more modern appearance, and significantly increase the output of your interior lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Appearance. \u003c\/strong\u003eThe LED bulbs included in this kit feature a 6000K color temperature, which is a true cool white output without any blue - just like factory installed LEDs. This provides a serious upgrade in the overall appearance of your interior when compared to the factory halogen bulbs. All Diode Dynamics LED bulbs are tested in our in-house laboratory where we test the light output and color temperature, so you know you’re getting consistent performance. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness.\u003c\/strong\u003e All Diode Dynamics Interior LED conversion kits are available in two levels of brightness, Stage 1 and Stage 2.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eStage 1\u003c\/strong\u003e gives your interior an ultra-modern appearance, while providing a slight increase in output compared to your factory lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eStage 2\u003c\/strong\u003e steps things up with a significant increase in overall light output throughout the interior. That loose change between the seats won’t be hidden for long!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug-and-Play. \u003c\/strong\u003eThe LED bulbs included in this kit feature plug-and-play connections for simple installation. Our bulbs are not constructed with cheap connectors, so you don’t have to worry about them coming loose and falling out. Simply remove your factory bulbs and these will fit right in place! To help with installation, we’ve included two plastic trim removal tools with each kit. If any bulb does not light up when you turn it on, simply remove the bulb, rotate it 180 degrees and reinstall.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eUnlike other bulbs on the market, Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, which is what kills most LED bulbs over time. However, just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Toyota or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Stage 1","offer_id":67693338558613,"sku":"DD0631","price":121.56,"currency_code":"USD","in_stock":true},{"title":"Stage 2","offer_id":67693338591381,"sku":"DD0632","price":204.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0632_4runner_2003_interior_led_kit_cool_white_stage_2_1.jpg?v=1791923716"},{"product_id":"fog-light-leds-for-2003-2009-toyota-4runner-pair","title":"Fog Light LEDs for 2003-2009 Toyota 4Runner (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Toyota 4Runner fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Toyota 4Runner. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your 4Runner.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Toyota 4Runner are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your 4Runner without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Toyota or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48 \/ Cool White (6000K)","offer_id":67721832956053,"sku":"DD0136P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Cool White (6000K)","offer_id":67721832988821,"sku":"DD0142P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Cool White (6000K)","offer_id":67721833021589,"sku":"DD0465P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Yellow (3000K)","offer_id":67721833054357,"sku":"DD0466P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0465p_sl2_9006_9012_white_pair_fog_c_oo5csot1pefiwelm_a6a9a473-9bbd-4562-8222-a41a2d369096.jpg?v=1792098171"},{"product_id":"front-turn-signal-leds-for-2003-2005-toyota-4runner-pair","title":"Front Turn Signal LEDs for 2003-2005 Toyota 4Runner (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Toyota 4Runner front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Toyota 4Runner illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the 4Runner.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Turn_Signal_-_Comparision_Image.jpg\" alt=\"Front Turn Signal Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer an amber color option, which is correct to SAE\/DOT \"amber\" requirements. Whether you have a clear lens or an amber reflector over the turn signal bulb on your 4Runner, amber is the correct emitter color for maximum turn signal output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the 4Runner looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the 4Runner, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your 4Runner. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Toyota or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67721937813653,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67721937846421,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67721937879189,"sku":"DD0114P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/frnturn-3003_106668.jpg?v=1792098423"},{"product_id":"front-turn-signal-leds-for-2003-2005-toyota-4runner-w-drl-pair","title":"Front Turn Signal LEDs for 2003-2005 Toyota 4Runner (w\/ DRL) (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Toyota 4Runner front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3157 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Toyota 4Runner illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the 4Runner.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Turn_Signal_-_Comparision_Image.jpg\" alt=\"Front Turn Signal Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer an amber color option, which is correct to SAE\/DOT \"amber\" requirements. Whether you have a clear lens or an amber reflector over the turn signal bulb on your 4Runner, amber is the correct emitter color for maximum turn signal output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the 4Runner looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the 4Runner, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your 4Runner. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Toyota or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67721938010261,"sku":"DD0050P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67721938043029,"sku":"DD0055P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67721938075797,"sku":"DD0058P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/frnturn-3004_122283.jpg?v=1792098430"},{"product_id":"high-beam-led-headlight-bulbs-for-2003-2024-toyota-4runner-pair","title":"High Beam LED Headlight Bulbs for 2003-2024 Toyota 4Runner (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\t\n\u003cli\u003eDirect replacement for Toyota 4Runner High Beam headlight bulbs with compact fitment.\u003c\/li\u003e\n\u003cli\u003eAdvanced LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003eInternal cooling for superior reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003cli\u003eBacked by limited lifetime warranty.\u003c\/li\u003e\n\u003cli\u003eAnti-flicker modules included with order.\u003c\/li\u003e\t\n\u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSL2 and SL2 Pro LED Headlight\u003c\/h3\u003e\n\u003cp\u003eDiode Dynamics has set the standard for LED bulbs with a history of solutions engineered to provide a true increase in performance. Thanks to improvements in technology, we are excited to redefine the standard once again. Introducing the SL2 and SL2 Pro LED headlight bulbs! The new SL2 and SL2 Pro LED bulbs have been carefully designed as a direct plug-and-play replacement for your Toyota 4Runner headlight bulbs, providing a significant increase in output, in a compact package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext-Generation TST Technology. \u003c\/strong\u003eThe SL2 Pro features new thermal separation technology (TST) LEDs. Unlike a traditional LED chip, TST LEDs are designed with electrical connections on the top. This means the entire bottom surface of the LED can be dedicated to channeling thermal energy out and away from the LED. This lowers thermal resistance, allowing the SL2 Pro to run at higher power levels than traditional LED bulbs, while maintaining focus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Optical Focus.\u003c\/strong\u003e The headlight housings on your Toyota 4Runner are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright the bulb is - you won't have a focused hotspot of light to shine down the road where you need it. Instead, you'll have more glare, which lights up the foreground and makes it harder to see in the distance. The SL2 and SL2 Pro LED bulbs were engineered to focus light just like your 4Runner original bulb, matching the original beam pattern while still providing an increase in total output. These days, some LED bulbs on the market use the smallest LEDs possible to accomplish focus, but this leads to \"over-focus\", where you begin seeing streaks, lines, and harsh cutoffs in the beam pattern. Instead of using the smallest LEDs possible, the SL2 and SL2 Pro LEDs were optimized to provide a smooth and comfortable beam pattern, while still maintaining focus and increased output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Cooling.\u003c\/strong\u003e The SL2 Pro features an integrated top-mounted fan for superior thermal management and reliability. Since the fan is sealed inside the housing, there's no concerns about damage from dust or moisture over time. And with the fan on the top of the bulb, the cooling happens right next to the LEDs - the source of the heat. While standard LED bulbs use heat pipes and other tricks to move heat to the bottom of the bulb, where it's cooled off, the SL2 Pro keeps it simple and more efficient. This provides maximum cooling efficiency and output.\u003c\/p\u003e\n\u003cp\u003eThe SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Integrated Design. \u003c\/strong\u003eUnlike traditional LED bulbs, the SL2 and SL2 Pro LED bulbs don't have any external drivers. Along with their compact size, that means excellent fitment inside your 4Runner's housing, without the need to tuck away bulky drivers. Installation is easy - simply remove your factory bulbs and these LED bulbs will fit in their place, with a plug-and-play connector. And if your original bulb is installed at an angle, no worries - SL2 Pro has you covered with an adjustable collar that can be securely locked at the correct position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCANBUS Systems.\u003c\/strong\u003e Some vehicles use a CANBUS electrical system that can cause flickering or bulb-out warnings when LEDs are installed. These issues can be prevented with our Anti-Flicker Modules, which are designed to condition factory power signals, both by smoothing out flickering signals to the output, and by replicating the power consumption of a halogen bulb, to avoid vehicle \"bulb out\" warnings that usually come with LED power draws. Your vehicle uses a CANBUS system, so we include a pair of Anti-Flickers Modules with your order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 and SL2 Pro LED was engineered for reliability, from its full metal construction to the fully-sealed design. The SL2 and SL2 Pro were put through their paces in our environmental testing chambers - where the bulb lasted through repeated thermal cycles from -40 through 85 degrees Celsius (-40 to 185F), along with a range of other environmental tests. They're also designed with transient protection, to prevent premature failure from electrical spikes in the vehicle. They're even compatible up to 30V! We're so confident in the SL2 and SL2 Pro LED bulbs, that they're backed by an industry-leading limited LIFETIME warranty. See details at \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\n\u003ch3\u003eBulb Options\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e9005 SL2\u003c\/strong\u003e - \u003ca href=\"https:\/\/www.diodedynamics.com\/9005-sl2-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e\n\u003cli\u003e1400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e9005 SL2 Pro\u003c\/strong\u003e\u003ca href=\"https:\/\/www.diodedynamics.com\/9005-sl2-pro-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced TST LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003e2400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003e6000K cool white color.\u003c\/li\u003e\n\u003cli\u003eFully integrated design, no wires or external drivers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"SL2","offer_id":67722044211349,"sku":"DD0637P","price":146.96,"currency_code":"USD","in_stock":true},{"title":"SL2 Pro (2400 lumens)","offer_id":67722044244117,"sku":"DD0639P","price":188.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/3004-high-ledheadlight_215305.jpg?v=1792098696"},{"product_id":"low-beam-led-headlight-bulbs-for-2003-2005-toyota-4runner-pair","title":"Low Beam LED Headlight Bulbs for 2003-2005 Toyota 4Runner (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\t\n\u003cli\u003eDirect replacement for Toyota 4Runner Low Beam headlight bulbs with compact fitment.\u003c\/li\u003e\n\u003cli\u003eAdvanced LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003eInternal cooling for superior reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003cli\u003eBacked by limited lifetime warranty.\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSL2 and SL2 Pro LED Headlight\u003c\/h3\u003e\n\u003cp\u003eDiode Dynamics has set the standard for LED bulbs with a history of solutions engineered to provide a true increase in performance. Thanks to improvements in technology, we are excited to redefine the standard once again. Introducing the SL2 and SL2 Pro LED headlight bulbs! The new SL2 and SL2 Pro LED bulbs have been carefully designed as a direct plug-and-play replacement for your Toyota 4Runner headlight bulbs, providing a significant increase in output, in a compact package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext-Generation TST Technology. \u003c\/strong\u003eThe SL2 Pro features new thermal separation technology (TST) LEDs. Unlike a traditional LED chip, TST LEDs are designed with electrical connections on the top. This means the entire bottom surface of the LED can be dedicated to channeling thermal energy out and away from the LED. This lowers thermal resistance, allowing the SL2 Pro to run at higher power levels than traditional LED bulbs, while maintaining focus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Optical Focus.\u003c\/strong\u003e The headlight housings on your Toyota 4Runner are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright the bulb is - you won't have a focused hotspot of light to shine down the road where you need it. Instead, you'll have more glare, which lights up the foreground and makes it harder to see in the distance. The SL2 and SL2 Pro LED bulbs were engineered to focus light just like your 4Runner original bulb, matching the original beam pattern while still providing an increase in total output. These days, some LED bulbs on the market use the smallest LEDs possible to accomplish focus, but this leads to \"over-focus\", where you begin seeing streaks, lines, and harsh cutoffs in the beam pattern. Instead of using the smallest LEDs possible, the SL2 and SL2 Pro LEDs were optimized to provide a smooth and comfortable beam pattern, while still maintaining focus and increased output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Cooling.\u003c\/strong\u003e The SL2 Pro features an integrated top-mounted fan for superior thermal management and reliability. Since the fan is sealed inside the housing, there's no concerns about damage from dust or moisture over time. And with the fan on the top of the bulb, the cooling happens right next to the LEDs - the source of the heat. While standard LED bulbs use heat pipes and other tricks to move heat to the bottom of the bulb, where it's cooled off, the SL2 Pro keeps it simple and more efficient. This provides maximum cooling efficiency and output.\u003c\/p\u003e\n\u003cp\u003eThe SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Integrated Design. \u003c\/strong\u003eUnlike traditional LED bulbs, the SL2 and SL2 Pro LED bulbs don't have any external drivers. Along with their compact size, that means excellent fitment inside your 4Runner's housing, without the need to tuck away bulky drivers. Installation is easy - simply remove your factory bulbs and these LED bulbs will fit in their place, with a plug-and-play connector. And if your original bulb is installed at an angle, no worries - SL2 Pro has you covered with an adjustable collar that can be securely locked at the correct position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 and SL2 Pro LED was engineered for reliability, from its full metal construction to the fully-sealed design. The SL2 and SL2 Pro were put through their paces in our environmental testing chambers - where the bulb lasted through repeated thermal cycles from -40 through 85 degrees Celsius (-40 to 185F), along with a range of other environmental tests. They're also designed with transient protection, to prevent premature failure from electrical spikes in the vehicle. They're even compatible up to 30V! We're so confident in the SL2 and SL2 Pro LED bulbs, that they're backed by an industry-leading limited LIFETIME warranty. See details at \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\n\u003ch3\u003eBulb Options\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e9006 SL2\u003c\/strong\u003e - \u003ca href=\"https:\/\/www.diodedynamics.com\/9006-sl2-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e\n\u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e\n\u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e9006 SL2 Pro\u003c\/strong\u003e - \u003ca href=\"https:\/\/www.diodedynamics.com\/9006-sl2-pro-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced TST LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003e2400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003e6000K cool white color.\u003c\/li\u003e\n\u003cli\u003eFully integrated design, no wires or external drivers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"SL2","offer_id":67722212802709,"sku":"DD0465P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 Pro (2400 lumens)","offer_id":67722212835477,"sku":"DD0482P","price":153.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/3004-low-ledheadlight_212784.jpg?v=1792099074"},{"product_id":"map-light-leds-for-2003-2024-toyota-4runner-pair","title":"Map Light LEDs for 2003-2024 Toyota 4Runner (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern cool white appearance, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Toyota 4Runner map light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eThis replacement LED bulb is a great way to improve the look and function of the map lights on your Toyota 4Runner. They'll provide a modern, premium appearance compared to the original incandescent bulb. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the 4Runner.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_Map.jpg\" width=\"750\" height=\"150\" alt=\"Map Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your 4Runner. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Toyota or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Amber","offer_id":67722263527573,"sku":"DD0018P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Blue","offer_id":67722263560341,"sku":"DD0019P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Warm White (3000K)","offer_id":67722263593109,"sku":"DD0020P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Natural White (4000K)","offer_id":67722263625877,"sku":"DD0021P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Pure White (5000K)","offer_id":67722263658645,"sku":"DD0022P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Red","offer_id":67722263691413,"sku":"DD0023P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67722263724181,"sku":"DD0024P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Amber","offer_id":67722263756949,"sku":"DD0025P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Blue","offer_id":67722263789717,"sku":"DD0026P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67722263822485,"sku":"DD0027P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Natural White (4000K)","offer_id":67722263855253,"sku":"DD0028P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Pure White (5000K)","offer_id":67722263888021,"sku":"DD0029P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Red","offer_id":67722263920789,"sku":"DD0030P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67722263953557,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Amber","offer_id":67722263986325,"sku":"DD0032P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Blue","offer_id":67722264019093,"sku":"DD0033P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Green","offer_id":67722264051861,"sku":"DD0034P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Warm White (3000K)","offer_id":67722264084629,"sku":"DD0035P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Red","offer_id":67722264117397,"sku":"DD0036P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Cool White (6000K)","offer_id":67722264150165,"sku":"DD0037P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Green","offer_id":67722264182933,"sku":"DD0203P","price":11.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0028p_194_hp5_natural_white_pair_map_titled_40.jpg?v=1792099295"},{"product_id":"rear-turn-signal-leds-for-2003-2005-toyota-4runner-w-drl-pair","title":"Rear Turn Signal LEDs for 2003-2005 Toyota 4Runner (w\/ DRL) (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Toyota 4Runner rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Toyota 4Runner illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the 4Runner.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Rear_Turn_Signal_-_Comparision_Image.jpg\" alt=\"Amber Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we offer both a red and amber option, which meet SAE\/DOT \"amber\" and \"red\" requirements. If you have a clear lens or an amber reflector over the turn signal bulb on your 4Runner, amber is the correct emitter color for maximum turn signal output. If your vehicle has a red lens over the rear turn signal, then red is the correct emitter for you.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the 4Runner looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the 4Runner, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your 4Runner. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Toyota or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67722402136213,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP11 \/ Red","offer_id":67722402168981,"sku":"DD0108P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67722402201749,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722402234517,"sku":"DD0112P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67722402267285,"sku":"DD0114P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67722402300053,"sku":"DD0115P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0114p_7443_xp80_amber_pair_3_3.jpg?v=1792099459"},{"product_id":"rear-turn-signal-leds-for-2003-2009-toyota-4runner-pair","title":"Rear Turn Signal LEDs for 2003-2009 Toyota 4Runner (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Toyota 4Runner rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Toyota 4Runner illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the 4Runner.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Rear_Turn_Signal_-_Comparision_Image.jpg\" alt=\"Amber Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we offer both a red and amber option, which meet SAE\/DOT \"amber\" and \"red\" requirements. If you have a clear lens or an amber reflector over the turn signal bulb on your 4Runner, amber is the correct emitter color for maximum turn signal output. If your vehicle has a red lens over the rear turn signal, then red is the correct emitter for you.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the 4Runner looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the 4Runner, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your 4Runner. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Toyota or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67722407116949,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP11 \/ Red","offer_id":67722407149717,"sku":"DD0108P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67722407182485,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722407215253,"sku":"DD0112P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67722407248021,"sku":"DD0114P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67722407280789,"sku":"DD0115P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0114p_7443_xp80_amber_pair_titled_20.jpg?v=1792099463"},{"product_id":"vanity-light-leds-for-2003-2009-toyota-4runner-pair","title":"Vanity Light LEDs for 2003-2009 Toyota 4Runner (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWarm or cool white LED, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Toyota 4Runner vanity mirror bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 28mm Fuse bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eReplacement LED bulbs are a simple way to improve the look and styling of the vanity mirror lights on your Toyota 4Runner. Compared to the original incandescent bulbs, they will provide a brighter appearance with modern color. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the 4Runner.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Vanity_-_Comparison_Collage.jpg\" width=\"639\" height=\"170\" alt=\"Fuse Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColor Options.\u003c\/strong\u003e In addition to vibrant colors of blue, red, amber, and green, our vanity light bulbs are available in a cool white 6000K, and warm white 3000K. If you'd like to maintain a neutral appearance for yourself or your passenger, we recommend the warm white.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze the exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your 4Runner. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Toyota or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SMF1 \/ Amber","offer_id":67723401691285,"sku":"DD0038P","price":6.36,"currency_code":"USD","in_stock":true},{"title":"SMF1 \/ Blue","offer_id":67723401724053,"sku":"DD0039P","price":6.36,"currency_code":"USD","in_stock":true},{"title":"SMF1 \/ Green","offer_id":67723401756821,"sku":"DD0040P","price":6.36,"currency_code":"USD","in_stock":true},{"title":"SMF1 \/ Warm White (3000K)","offer_id":67723401789589,"sku":"DD0041P","price":6.36,"currency_code":"USD","in_stock":true},{"title":"SMF1 \/ Red","offer_id":67723401822357,"sku":"DD0042P","price":6.36,"currency_code":"USD","in_stock":true},{"title":"SMF1 \/ Cool White (6000K)","offer_id":67723401855125,"sku":"DD0043P","price":6.36,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Amber","offer_id":67723401887893,"sku":"DD0044P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Blue","offer_id":67723401920661,"sku":"DD0045P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Green","offer_id":67723401953429,"sku":"DD0046P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Warm White (3000K)","offer_id":67723401986197,"sku":"DD0047P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Red","offer_id":67723402018965,"sku":"DD0048P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Cool White (6000K)","offer_id":67723402051733,"sku":"DD0049P","price":9.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/van-3003_120874.jpg?v=1792100801"},{"product_id":"stage-series-led-rock-light-kit-8-pack","title":"Stage Series LED Rock Light Kit (8-pack)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eYour choice of Single-Color, Dual-Color, or RGBW.\u003c\/li\u003e \u003cli\u003eHigh-output LED performance, with dedicated white or multicolor emitters.\u003c\/li\u003e \u003cli\u003eDual-Color models allow instant color switching without lens changes.\u003c\/li\u003e \u003cli\u003eRGBW models offer full color control via remote or Bluetooth app.\u003c\/li\u003e \u003cli\u003eModular mounting options built in, with additional accessory mounts.\u003c\/li\u003e \u003cli\u003eFully-encapsulated, durable design backed by a limited lifetime warranty.\u003c\/li\u003e \u003cli\u003eOptically-engineered, durable polycarbonate lenses for wide, even spread.\u003c\/li\u003e \u003cli\u003eMade in USA with Global Materials.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eLooking to light up more than just the trail? The Stage Series LED Rock Light Kit delivers high-performance lighting with unmatched versatility. Whether you're crawling over rocks, lighting up a campsite, or adding functional lighting to your truck bed or rack, this system is built to adapt to your setup.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOne System. Endless Uses.\u003c\/strong\u003e Stage Series Rock Lights aren't just for off-road use. With powerful output and wide-angle optics, they're perfect for traditional rock lighting, scene lighting, bed and cargo illumination, roof rack setups, and more. From the trail to the campsite, you get reliable, usable light exactly where you need it.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChoose Your Output.\u003c\/strong\u003e Available in multiple configurations to match your needs:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSingle Color:\u003c\/strong\u003e Maximum output with up to 1000 lumens per light. Ideal when brightness is your top priority.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDual-Color (White\/Amber or White\/Red):\u003c\/strong\u003e Instantly switch between high-output white and a low-glare amber or red beam. Perfect for scene lighting, preserving night vision, or reducing glare in dust, fog, or camp environments.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRGBW:\u003c\/strong\u003e Full multicolor control with added pure white output. Customize colors, patterns, and brightness using a remote or Bluetooth app.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for Real-World Use.\u003c\/strong\u003e Unlike basic rock lights, Stage Series lights feature integrated optical lenses designed for wide, even coverage. The thick, automotive-grade polycarbonate lens and rugged aluminum housing are built to handle impacts, weather, and long-term use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFlexible Mounting Options.\u003c\/strong\u003e Mount them your way with a hidden center bolt or optional magnet mounts. Compatible with a wide range of accessories including surface mounts, rack mounts, and other custom solutions, making it easy to install on vehicles, trailers, campers, and more.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSimple Connections.\u003c\/strong\u003e Each light includes a compact, waterproof M8 connector for a secure, plug-and-play installation. This compact wiring solution makes routing clean and easy in tight spaces. Already running Stage Series Single-Color Rock Lights? Dual-Color models use the same wiring harness, making it easy to upgrade your setup without reworking your wiring.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Single-Color \/ No \/ No","offer_id":67723501535381,"sku":"DD7742","price":431.96,"currency_code":"USD","in_stock":true},{"title":"Single-Color \/ Yes \/ No","offer_id":67723501568149,"sku":"DD7743","price":527.96,"currency_code":"USD","in_stock":true},{"title":"RGBW \/ No \/ No","offer_id":67723501600917,"sku":"DD7744","price":431.96,"currency_code":"USD","in_stock":true},{"title":"RGBW \/ No \/ Yes","offer_id":67723501633685,"sku":"DD7744C","price":511.96,"currency_code":"USD","in_stock":true},{"title":"RGBW \/ Yes \/ No","offer_id":67723501666453,"sku":"DD7745","price":559.96,"currency_code":"USD","in_stock":true},{"title":"RGBW \/ Yes \/ Yes","offer_id":67723501699221,"sku":"DD7745C","price":639.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color White\/Red \/ No \/ No","offer_id":67723501731989,"sku":"DD8746","price":431.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color White\/Red \/ Yes \/ No","offer_id":67723501764757,"sku":"DD8747","price":559.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color White\/Amber \/ No \/ No","offer_id":67723501797525,"sku":"DD8756","price":431.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color White\/Amber \/ Yes \/ No","offer_id":67723501830293,"sku":"DD8757","price":559.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd8746_rocklight_red_white_m8_8_pack_lights_only_1.jpg?v=1792101023"},{"product_id":"stage-series-rgbw-led-rock-light-kit-8-pack","title":"Stage Series RGBW LED Rock Light Kit (8-pack)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eHigh-power RGBW LED function.\u003c\/li\u003e \u003cli\u003eConvenient center-mount or magnet mount installation.\u003c\/li\u003e \u003cli\u003eControl with remote or Bluetooth app.\u003c\/li\u003e \u003cli\u003eIncludes all necessary wiring and mounting hardware.\u003c\/li\u003e \u003cli\u003eAluminum heatsink with signature Ico Bezel shape.\u003c\/li\u003e \u003cli\u003eThick, durable lenses, engineered to spread light.\u003c\/li\u003e \u003cli\u003eEngineered and Assembled in USA.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eLooking to light up the trail at night? Look no further. Introducing the Stage Series LED Rock Light Kit! Designed for superior durability and maximum performance, Stage Series LED Rock Lights have set a new standard in the offroad category. This kit includes all the wiring and hardware necessary to mount four Stage Series LED rock lights, making it easier than ever to add rock lights to your vehicle.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMulticolor plus White.\u003c\/strong\u003e With four high-intensity RGBW LED emitters, the Diode Dynamics Rock Light provides plenty of output in any color you can think of, paired with our RGBW remote or RGBW Bluetooth controller and app. The diffused optical feature of the lens provides excellent integration of colors. And unlike other multicolor lights, the extra white chip means that these will light up in a bright, pure white color when you want to maximize output. Want to show off? Use your controller to start a pattern, strobe, fade, or control the brightness. The best of both worlds! Stage Series Rock Lights are also compatible with standard PWM dimmers, allowing you to choose the perfect brightness level for your application. Our RGBW rock lights pack a punch, but if you are looking for the most output possible, check out our \u003ca\u003esingle-color rock lights.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptically-Engineered Lenses.\u003c\/strong\u003e Most rock lights are built without optics in mind. They use a simple clear cover to protect from the elements. In true Diode Dynamics style, we've incorporated optical features to get the best performance possible. Four individual optics are molded into the outer lens, which provide excellent spread and even, consistent coverage from each light. The lens itself is a thick automotive-grade polycarbonate, made to take a beating on the trail. And the best part? The lenses are interchangeable, and can be swapped out easily as needed.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMount it Your Way.\u003c\/strong\u003e Our Rock Light Kit can be mounted using the center bolt mounting point that is neatly hidden underneath the lens and comes standard, or you can select the magnet mount option. Our magnet mounts feature an overmolded design that keeps your rock light secure using the integrated mounting hole. With N42 magnets providing an approximate pull\/holding force of 35lbs, you can rest assured that the magnet won't go anywhere!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSimple Connections.\u003c\/strong\u003e For maximum convenience, these lights include a waterproof M8 barrel-style connector with a 10-inch lead. This provides a secure, waterproof connection and is compatible with the included plug-and-play harnesses. At only 8mm in diameter, it's still easy to route the wires to where you need them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e We know your rock lights will be put to the test, so you can rest assured that they have been designed for superior durability. They are IP68 waterproof rated and feature a cast aluminum housing and pin-fin heatsink, for effective thermal dissipation. The lens is designed with thick automotive-grade polycarbonate, and a UV coating. Backed by a limited lifetime warranty, they have been tested in-house from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. Rest assured, the Stage Series Rock Lights will handle whatever you throw at them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"No \/ No","offer_id":67723502420117,"sku":"DD7744","price":431.96,"currency_code":"USD","in_stock":true},{"title":"No \/ Yes","offer_id":67723502452885,"sku":"DD7744C","price":511.96,"currency_code":"USD","in_stock":true},{"title":"Yes \/ No","offer_id":67723502485653,"sku":"DD7745","price":559.96,"currency_code":"USD","in_stock":true},{"title":"Yes \/ Yes","offer_id":67723502518421,"sku":"DD7745C","price":639.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd7454_rocklight_rgbw_m8_8_pack_pods_only_icon_2.jpg?v=1792100984"},{"product_id":"stage-series-single-color-led-rock-light-kit-8-pack","title":"Stage Series Single-Color LED Rock Light Kit (8-pack)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConvenient center-mount or magnet mount installation.\u003c\/li\u003e \u003cli\u003eIncludes all necessary wiring and mounting hardware.\u003c\/li\u003e \u003cli\u003eAluminum heatsink with signature Ico Bezel shape.\u003c\/li\u003e \u003cli\u003eThick, durable lenses, engineered to spread light.\u003c\/li\u003e \u003cli\u003eEngineered and Assembled in USA.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eLooking to light up the trail at night? Look no further. Introducing the Stage Series LED Rock Light Kit! Designed for superior durability and maximum performance, Stage Series LED Rock Lights have set a new standard in the offroad category. This kit includes all the wiring and hardware necessary to mount four Stage Series LED rock lights, making it easier than ever to add rock lights to your vehicle.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUnmatched Light Output.\u003c\/strong\u003e With a true power draw of over 10 watts, the Stage Series Rock Light provides a peak output of 1000 lumens. Even with claims of high power, generic rock lights run at only a few watts, making the Diode Dynamics Rock Light a huge step up for the entire category.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptically-Engineered, Interchangeable Lenses.\u003c\/strong\u003e In true Diode Dynamics style, we've incorporated optical features to get the best performance possible. Four individual optics are molded into the outer lens, which provides excellent spread and even, consistent coverage from each light. The lens itself is a thick automotive-grade polycarbonate, made to take a beating on the trail. And the best part? Our single-color rock light kit includes four amber and four red lenses, allowing you to change the color of your rock lights for maximum versatility. \u003ca\u003eClick here\u003c\/a\u003e to find extra interchangeable lenses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDual Power Levels.\u003c\/strong\u003e The Stage Series Rock Light uses a simple 3-wire system, allowing you to select a low-power or high-power mode. At 3 watts of output, the low-power mode is actually on-par with the max output of most generic rock lights! If you want to light up a campsite and you don't need full power, the low-power mode is a great way to conserve battery power. This 3-wire setup also provides much more functionality on custom off-road builds. By tying the low and high power wires into your factory harness, you can use them as a dual-function running\/brake light, or running\/turn signal, all in one simple package. Stage Series Rock Lights are also compatible with standard PWM dimmers, allowing you to choose the perfect brightness level for your application.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eMount it Your Way.\u003c\/strong\u003e Our Rock Light Kit can be mounted using the center bolt mounting point that is neatly hidden underneath the lens and comes standard, or you can select the magnet mount option. Our magnet mounts feature an overmolded design that keeps your rock light secure using the integrated mounting hole. With N42 magnets providing an approximate pull\/holding force of 35lbs, you can rest assured that the magnet won't go anywhere!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple Connections.\u003c\/strong\u003e For maximum convenience, these lights include a waterproof M8 barrel-style connector with a 10-inch lead. This provides a secure, waterproof connection and is compatible with the included plug-and-play harnesses. At only 8mm in diameter, it's still easy to route the wires to where you need them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e We know your rock lights will be put to the test, so you can rest assured that they have been designed for superior durability. They are IP68 waterproof rated and feature a cast aluminum housing and pin-fin heatsink, for effective thermal dissipation. The lens is designed with thick automotive-grade polycarbonate, and a UV coating. Backed by a limited lifetime warranty, they have been tested in-house from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. Rest assured, the Stage Series Rock Lights will handle whatever you throw at them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"No","offer_id":67723510349973,"sku":"DD7742","price":431.96,"currency_code":"USD","in_stock":true},{"title":"Yes","offer_id":67723510382741,"sku":"DD7743","price":527.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd7449_rocklight_white_diffused_m8_8_pack_pods_only_2.jpg?v=1792100959"},{"product_id":"ss10-led-chase-light","title":"SS10 LED Chase Light","description":"\u003cp\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Diode Dynamics SS10 LED Chase Light features a 3-in-1 design, combining a yellow chase light, red brake light, and white reverse light into one compact light bar. With high-intensity LEDs, programmable strobe patterns, and SmartTap programming, the SS10 LED Chase Light is an easy upgrade that improves visibility when it matters most.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIntegrated Chase Light.\u003c\/strong\u003e Featuring a programmable yellow chase light with 20 selectable strobing patterns, the SS10 significantly improves visibility in any condition. Whether you're out on a dusty trail or stopped at a campsite, this LED Chase Light cuts through haze with a powerful yellow flood beam pattern, ensuring your vehicle stands out.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSmartTap Programming\u003c\/strong\u003e allows you to easily cycle through 20 chase patterns using the included magnet tool. Simply power up the chase light, tap the magnet to the bezel, and watch the pattern change until you reach your preferred operating mode. It's as simple as that!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrake Light Function.\u003c\/strong\u003e The SS10 LED Chase Light also adds a high-power brake light. Use the magnet tool to choose between solid illumination, triple-flash SafetyStrobe mode, or a slower pulsing mode designed for off-road use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup.\u003c\/strong\u003e Factory reverse lights are often insufficient, especially off the trail. Using patented TIR optics and high-power LEDs, the SS10 LED Chase Light provides an additional reverse light that's several times brighter than stock bulbs alone. The reverse function can optionally be wired to automatically come on when the vehicle is put in reverse.\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Default Title","offer_id":67723522998421,"sku":"DD8931","price":239.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd8931_universal_ss10_chase_lightbar_straight_on.jpg?v=1792100996"},{"product_id":"led-flasher-for-2003-2009-toyota-4runner-non-dtrl","title":"LED Flasher for 2003-2009 Toyota 4Runner (non-DTRL)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCompatible with LED bulbs\u003c\/li\u003e \u003cli\u003ePrevents hyperflash errors\u003c\/li\u003e \u003cli\u003eSimple swap for original module\u003c\/li\u003e \u003cli\u003eDirect fitment and proper sizing\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFlasher\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eHyperblink Fix. \u003c\/strong\u003eWhy do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as \"hyperblinking,\" even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out!\u003c\/p\u003e \u003cp\u003eTo slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQuality. \u003c\/strong\u003eThe flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"CF18 Standard","offer_id":68010362011797,"sku":"DD4003","price":15.96,"currency_code":"USD","in_stock":true},{"title":"CF18 SmartTap","offer_id":68010362044565,"sku":"DD4015","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/flasher-3004_3997_cf18_flasher.jpg?v=1792513253"},{"product_id":"smarttap-led-flasher-for-2003-2009-toyota-4runner-non-dtrl","title":"SmartTap LED Flasher for 2003-2009 Toyota 4Runner (non-DTRL)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdds unique, programmable functions.\u003c\/li\u003e \u003cli\u003eCompatible with LED or standard bulbs, no hyperflash.\u003c\/li\u003e \u003cli\u003ePlug and play swap for Toyota 4Runner flasher.\u003c\/li\u003e \u003cli\u003eAssembled in USA, 3 year warranty.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eA Smarter Flasher\u003c\/h3\u003e \u003cp\u003eThe SmartTap™ is a replacement turn signal flasher relay for the Toyota 4Runner. With plug-and-play installation, it offers a lot more than your average relay: an embedded microcontroller is loaded with exclusive software, which adds new features to your 4Runner! You can program the features just the way you'd like, with the help of the included programming guide.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTap-to-Signal:\u003c\/strong\u003e Anytime the turn signal is tapped, the turn signal will blink a number of times automatically. This one-touch signaling is a convenient way to signal other drivers when switching lanes. The number blinks is programmable, to make it as long or short as you'd like.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnique Hazard Functions:\u003c\/strong\u003e The SmartTap™ has built-in strobe, slo-mo and wig-wag hazard functions to help your vehicle stand out when the hazards are on. Apply these functions on their own, together, or with the strobe setting for a total of eight unique hazard functions!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eArrival and Departure Modes:\u003c\/strong\u003e When the lock or unlock button is pressed, your turn signals will stay on in a steady glow, for better visibility when approaching or leaving the vehicle at night. The lighting time can be adjusted from 10-90 seconds for additional illumination, or disabled if desired.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Toyota or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"CF18 SmartTap","offer_id":68011163353237,"sku":"DD4015","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/flasher-st-3004_4377_cf18_smarttap_flasher.jpg?v=1792514405"},{"product_id":"tail-light-leds-for-1996-2007-toyota-4runner-pair","title":"Tail Light LEDs for 1996-2007 Toyota 4Runner (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Toyota 4Runner tail light bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7443 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eInstant Brake. \u003c\/strong\u003eThe factory incandescent tail light bulb on the Toyota 4Runner lights up in a glow, which takes a moment to turn on. A modern LED upgrade provides instant response, which can alert other drivers on the road earlier, while also providing a modern LED appearance. This brake light LED is a great upgrade for your 4Runner in both style and function.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eSince the lens on your tail light housing is red, you'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. Red is the correct emitter color for maximum brake light output on your 4Runner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your 4Runner. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Toyota or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48 \/ Red","offer_id":68171823349909,"sku":"DD0112P","price":39.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/5cb3bbe2594b597f825a6b012f6a09c3.jpg?v=1793978142"}],"url":"https:\/\/www.diodedynamics.com\/collections\/toyota-4runner-2003-2005.oembed","provider":"Diode Dynamics LLC","version":"1.0","type":"link"}