{"title":"Impreza LED Lighting Upgrades","description":null,"products":[{"product_id":"rear-turn-signal-leds-for-1993-2003-subaru-impreza-pair","title":"Rear Turn Signal LEDs for 1993-2003 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 1156 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Impreza illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Rear_Turn_Signal_-_Comparision_Image.jpg\" alt=\"Amber Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we offer both a red and amber option, which meet SAE\/DOT \"amber\" and \"red\" requirements. If you have a clear lens or an amber reflector over the turn signal bulb on your Impreza, amber is the correct emitter color for maximum turn signal output. If your vehicle has a red lens over the rear turn signal, then red is the correct emitter for you.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Impreza looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Impreza, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67693225541781,"sku":"DD0001P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP11 \/ Red","offer_id":67693225574549,"sku":"DD0002P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67693225607317,"sku":"DD0004P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67693225640085,"sku":"DD0005P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67693225672853,"sku":"DD0007P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67693225705621,"sku":"DD0008P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/rerturn-2926_122931.jpg?v=1791923511"},{"product_id":"fog-light-leds-for-1993-1998-subaru-impreza-pair","title":"Fog Light LEDs for 1993-1998 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Impreza fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Subaru Impreza. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Subaru Impreza are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your Impreza without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48 \/ Cool White (6000K)","offer_id":67693237469333,"sku":"DD0136P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Cool White (6000K)","offer_id":67693237502101,"sku":"DD0142P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Cool White (6000K)","offer_id":67693237534869,"sku":"DD0465P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Yellow (3000K)","offer_id":67693237567637,"sku":"DD0466P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0465p_sl2_9006_9012_white_pair_fog_c_oo5csot1pefiwelm.jpg?v=1791923539"},{"product_id":"rear-turn-signal-leds-for-2004-2007-subaru-impreza-pair","title":"Rear Turn Signal LEDs for 2004-2007 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Impreza illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Rear_Turn_Signal_-_Comparision_Image.jpg\" alt=\"Amber Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we offer both a red and amber option, which meet SAE\/DOT \"amber\" and \"red\" requirements. If you have a clear lens or an amber reflector over the turn signal bulb on your Impreza, amber is the correct emitter color for maximum turn signal output. If your vehicle has a red lens over the rear turn signal, then red is the correct emitter for you.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Impreza looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Impreza, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67693286424725,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP11 \/ Red","offer_id":67693286457493,"sku":"DD0108P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67693286490261,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67693286523029,"sku":"DD0112P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67693286555797,"sku":"DD0114P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67693286588565,"sku":"DD0115P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/rerturn-2929_110331.jpg?v=1791923640"},{"product_id":"elite-series-fog-lamps-for-2012-2014-subaru-impreza-pair","title":"Elite Series Fog Lamps for 2012-2014 Subaru Impreza (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance OEM-grade replacement for Subaru Impreza\u003c\/li\u003e\n\u003cli\u003eCustom-engineered optic provides extremely wide, intense light output\u003c\/li\u003e\n\u003cli\u003eDistinctive integrated amber backlight\u003c\/li\u003e\n\u003cli\u003eRoad-legal fog light (SAE F3 compliant)\u003c\/li\u003e\n\u003cli\u003ePlug and play main beam, no modification needed\u003c\/li\u003e\n\u003cli\u003eEngineered and assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFactory fog lights are built to meet minimum output requirements. Every aftermarket design available provides similar lackluster performance, but with an LED. The focus has been on LED appearance, not increased output. There has never been an aftermarket fog light designed from the ground up for performance - until now.\u003c\/p\u003e\n\u003cp\u003eIntroducing the Elite Series Fog Lamps: the first OE-style fog lights that were designed for true performance. With a custom-engineered patent-pending optic, multi-die automotive emitters, and high-power full-copper circuit boards, the Elite Series fog light for the Subaru Impreza delivers up to 5 times more output than halogen lamps. With a plug-and-play installation, this is one of the easiest and most effective upgrades you can make to improve your visibility in inclement weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput that Outperforms. \u003c\/strong\u003eThe Elite Series Fog Lamp is built around a highly-engineered single-piece PMMA lens. This optic was carefully designed using advanced optical simulation software to produce a light pattern that is wider than any other aftermarket fog lamp on the market, with an 80-degree spread of highly intense light. Even with this extremely wide band of light, the pattern is extremely smooth throughout, with an extremely sharp cutoff to avoid glare to other drivers, including a BMW-style “color flicker” at the very edge of the pattern. Diode Dynamics engineers accomplished all this while still meeting SAE F3 fog light standards, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Elite_Series_Foglamps_-_Comparision_Images_B.jpg\" alt=\"SS3 Beam Patterns\" width=\"639\" height=\"170\"\u003e\u003c\/p\u003e\t\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003eThe white is a 6000K color temperature, which is a true cool white output. This will perfectly match other LEDs on your vehicle, such as DRLs or running lights. The white option also offers a premium BMW-style color band at the very top of the beam pattern.\u003c\/p\u003e\n\u003cp\u003eThe selective yellow option is 3000K in color temperature, which is great for high contrast in inclement weather, or in providing a distinctive look on the road. The yellow lamp consists of a yellow multi-die LED emitter paired with a yellow-tinted lens, to provide unmatched output and optical efficiency, even with the intense yellow output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eAll Elite Series Fog Lamps come standard with an integrated amber accent light. This backlight feature fully illuminates the main lens with amber LEDs, intended to match other position, sidemarker, or corner lights on your Impreza. This feature can be wired to any constant 12-volt source for your desired vehicle function, using the included tap connector. It will shut off automatically if the main beam is activated. Check local laws and regulations for acceptable use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-On Fitment. \u003c\/strong\u003eElite Series Fog Lamps were designed using a 3D scanner and installed on the vehicle in our testing garage, so you can rest assured they will be a perfect fit. They can be installed on your Subaru Impreza in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place, using sturdy glass-fiber-reinforced brackets. With built-in adjustment, the lamps can be aimed after installation. To wire them up, a pair of waterproof plug-and-play adapters are included to connect the lights to your factory bulb sockets. Click here to learn how to aim your Elite Series Foglamps: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=p5RXq28ZOYo\" target=\"_blank\"\u003e\u003cspan style=\"color: #c00000\"\u003eHow to Aim Your Fog Lights\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembled with Quality - in the USA. \u003c\/strong\u003eElite Series Fog Lamps are assembled in the USA using OEM-grade materials, including a precision aluminum casting, UV-coated outer lens, copper-core circuit board, and multi-die automotive emitters. After being assembled by Diode Dynamics in St. Louis, Missouri, they are robotically sealed with urethane epoxy for long-lasting protection against moisture, and packaged in form-fit foam for safe transportation. No expense has been spared, from materials to assembly, right here in America.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability - Backed for 8 Years. \u003c\/strong\u003eLike our popular Stage Series lineup, Elite Series LED lamps have been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components on your Impreza. With integrated moisture-proof vents, the lamps can “breath” with changes in temperature, maintaining a strong seal over time. And with built-in circuit protection for voltage spikes and reverse polarity, these lights will keep working for years. They are backed by an industry-leading 8 year limited warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White (6000K)","offer_id":67711533973653,"sku":"DD5128P","price":207.96,"currency_code":"USD","in_stock":true},{"title":"Yellow (3000K)","offer_id":67711534006421,"sku":"DD5129P","price":207.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color (6000K\/3000K)","offer_id":67711534039189,"sku":"DD5183P","price":255.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/esf-2920_146534.jpg?v=1792012399"},{"product_id":"2012-2016-subaru-impreza-hatchback-4th-brake-light-kit","title":"2012- 2016 Subaru Impreza Hatchback 4th Brake Light Kit","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSimple installation with plug-and-play wiring harness\u003c\/li\u003e\n\u003cli\u003eAdds a powerful reverse light, 4th brake light, and additional running light\u003c\/li\u003e\n\u003cli\u003eIncludes optional F1-style flash pattern\u003c\/li\u003e\n\u003cli\u003eOEM-grade construction with molded bracket and all-aluminum housing\u003c\/li\u003e\n\u003cli\u003eCustom-engineered TIR optics for industry-leading output\u003c\/li\u003e\n\u003cli\u003eMade in USA with Global Materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eLooking to give the rear bumper on your Subaru Impreza a JDM appearance without sacrificing performance or quality? Look no further. Introducing our Stage Series C2R 4th Brake Light Kit! This kit replaces the blank trim piece found on many USDM Subaru rear bumpers with our high-performance C2R LED Pod, housed in a custom-molded bracket for a clean, OEM fit and finish. The C2R functions as a rear fog light, adding a 4th brake light with an optional F1-style flash pattern, a powerful reverse light, and an additional red running light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eF1-Style 4th Brake Light. \u003c\/strong\u003eThe C2R features a high-power red function to serve as a powerful 4th brake light, along with the low-power running light. The high-power red functionality activates anytime you apply your brakes, adding a 4th brake light to your Impreza.\u003c\/p\u003e\n\u003cp\u003eThe C2R also features optional F1-style SafetyStrobe brake light, which can be activated in 15-second intervals. By default, the C2R will flash three times when the brake lights are initially applied, giving you a unique look on the road. The F1-style SafetyStrobe feature can be easily disabled if desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eFactory reverse lights often fall short when it comes to usable output. Powered by automotive-grade, high-intensity LEDs and our custom-engineered TIR optics, the C2R delivers a dramatic increase in brightness, providing significantly more light when backing up at night.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Running Light. \u003c\/strong\u003eThe C2R LED Pod features a distinctive red backlight that functions as an additional running light. Unlike small indicator LEDs found in other products, the backlight fully illuminates the TIR optic for a unique, modern appearance on the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM Fit and Finish. \u003c\/strong\u003eEach kit includes a custom-molded bracket designed specifically for the Impreza, allowing the C2R to mount flush in the rear bumper in the same location as JDM-model rear fog lights. The bracket itself features a grained texture that matches the surrounding trim pieces for a clean, OEM-style appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused. \u003c\/strong\u003eTraditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Our patented TIR (Total Internal Reflection) optic in the C2R collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the C2R serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the C2R is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output. \u003c\/strong\u003eAll Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood \u003c\/strong\u003e pattern provides a uniform, even illumination with a broad 70x45 degree spread of light. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses advanced pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout, making it perfect for use as a backup light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug-and-Play. \u003c\/strong\u003eThis kit is designed for simple, plug-and-play installation on your Impreza. The included wiring harness connects directly in-line with your tail light wiring with no splicing or modification needed. From there, simply route the wiring to the bumper and use the custom-molded bracket to mount the C2R securely in place with the included hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States using globally sourced materials, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"C2R + Brake","offer_id":67721579593877,"sku":"DD8068","price":175.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2015_subaru_wrx_c2r_4th_brake_kit_creative_-4_3.jpg?v=1792097592"},{"product_id":"2012-2016-subaru-impreza-c-light-switchback-led-halos","title":"2012-2016 Subaru Impreza C-Light Switchback LED Halos","description":"\u003csection\u003e\u003ch3\u003e2012-2016 Subaru Impreza Switchback LED Halos\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eComputer-designed LED halos, for perfect fitment in Subaru Impreza headlamps\u003c\/li\u003e \u003cli\u003eHuge increase in brightness, with pure white and brilliant amber output\u003c\/li\u003e \u003cli\u003eAssembled in the USA\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eTime for an upgrade! \u003c\/strong\u003e These C-Light LED modules are circuit boards that fit right behind the factory diffusing reflector, illuminating in an \u003cstrong\u003eextremely bright white\u003c\/strong\u003e as well as a \u003cstrong\u003ebrilliant amber\u003c\/strong\u003e. hese LEDs have been designed from the ground-up, and manufactured in St. Louis, Missouri, to be absolutely the brightest lights physically possible. They are compatible with 2012-2016 Impreza Base model headlamps, not the WRX and STi headlamps.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh output, clean appearance. \u003c\/strong\u003eThe custom-designed LED modules replace the factory bulb or single LED, illuminating with a much higher intensity. With our proprietary high-density \"HDLED\" technology, these modules are populated with \u003cstrong\u003eover 500 LED chips\u003c\/strong\u003e, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When it's off, the diffusing gel hides the chips, resulting in a \u003cstrong\u003eclean, OEM appearance\u003c\/strong\u003e.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePure white color. Assembled \u003c\/strong\u003e\u003cstrong\u003ein USA\u003c\/strong\u003e, the modules light in a pure 6000K white color, not a cool blue like cheaper products on the market. And because they use modern high-power amber chips, rather than traditional LEDs, the amber is even brighter than the white!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstant-current power. \u003c\/strong\u003eTo power the modules efficiently, your order includes two custom-designed drivers, which feature transient voltage suppression, reverse protection, and a switching driver for extremely high reliability over time. And here's what really makes this product shine over the competition: with an \u003cstrong\u003eembedded microcontroller\u003c\/strong\u003e, the drivers utilize \u003cstrong\u003emulti-stage PWM dimming\u003c\/strong\u003e, to allow for a half-brightness white, for use at night (parking lights), as well as a full-power white, for use as DRL during the day. Finally, the amber is run at even higher power, making the turn signal easily visible in broad daylight!\u003c\/p\u003e \u003cp\u003eProfessional installation is strongly recommended, as the factory headlights must be opened for installation. The halos must be custom-mounted in position using adhesive or beading wire.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Switchback Cool White and Amber","offer_id":67721579692181,"sku":"DD2221","price":143.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/13_impreza_switchback_compare_close.jpg?v=1792097589"},{"product_id":"2012-2016-subaru-impreza-sedan-4th-brake-light-kit","title":"2012-2016 Subaru Impreza Sedan 4th Brake Light Kit","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSimple installation with plug-and-play wiring harness\u003c\/li\u003e\n\u003cli\u003eAdds a powerful reverse light, 4th brake light, and additional running light\u003c\/li\u003e\n\u003cli\u003eIncludes optional F1-style flash pattern\u003c\/li\u003e\n\u003cli\u003eOEM-grade construction with molded bracket and all-aluminum housing\u003c\/li\u003e\n\u003cli\u003eCustom-engineered TIR optics for industry-leading output\u003c\/li\u003e\n\u003cli\u003eMade in USA with Global Materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eLooking to give the rear bumper on your Subaru Impreza a JDM appearance without sacrificing performance or quality? Look no further. Introducing our Stage Series C2R 4th Brake Light Kit! This kit replaces the blank trim piece found on many USDM Subaru rear bumpers with our high-performance C2R LED Pod, housed in a custom-molded bracket for a clean, OEM fit and finish. The C2R functions as a rear fog light, adding a 4th brake light with an optional F1-style flash pattern, a powerful reverse light, and an additional red running light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eF1-Style 4th Brake Light. \u003c\/strong\u003eThe C2R features a high-power red function to serve as a powerful 4th brake light, along with the low-power running light. The high-power red functionality activates anytime you apply your brakes, adding a 4th brake light to your Impreza.\u003c\/p\u003e\n\u003cp\u003eThe C2R also features optional F1-style SafetyStrobe brake light, which can be activated in 15-second intervals. By default, the C2R will flash three times when the brake lights are initially applied, giving you a unique look on the road. The F1-style SafetyStrobe feature can be easily disabled if desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eFactory reverse lights often fall short when it comes to usable output. Powered by automotive-grade, high-intensity LEDs and our custom-engineered TIR optics, the C2R delivers a dramatic increase in brightness, providing significantly more light when backing up at night.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Running Light. \u003c\/strong\u003eThe C2R LED Pod features a distinctive red backlight that functions as an additional running light. Unlike small indicator LEDs found in other products, the backlight fully illuminates the TIR optic for a unique, modern appearance on the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM Fit and Finish. \u003c\/strong\u003eEach kit includes a custom-molded bracket designed specifically for the Impreza, allowing the C2R to mount flush in the rear bumper in the same location as JDM-model rear fog lights. The bracket itself features a grained texture that matches the surrounding trim pieces for a clean, OEM-style appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused. \u003c\/strong\u003eTraditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Our patented TIR (Total Internal Reflection) optic in the C2R collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the C2R serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the C2R is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output. \u003c\/strong\u003eAll Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood \u003c\/strong\u003e pattern provides a uniform, even illumination with a broad 70x45 degree spread of light. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses advanced pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout, making it perfect for use as a backup light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug-and-Play. \u003c\/strong\u003eThis kit is designed for simple, plug-and-play installation on your Impreza. The included wiring harness connects directly in-line with your tail light wiring with no splicing or modification needed. From there, simply route the wiring to the bumper and use the custom-molded bracket to mount the C2R securely in place with the included hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States using globally sourced materials, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"C2R + Brake","offer_id":67721582084245,"sku":"DD8069","price":175.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2015_subaru_wrx_c2r_4th_brake_kit_creative_-4_1.jpg?v=1792097593"},{"product_id":"3rd-brake-light-led-for-1993-2005-subaru-impreza-one","title":"3rd Brake Light LED for 1993-2005 Subaru Impreza (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eIntense red LED illumination\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza 3rd brake light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 921 bulb size\u003c\/li\u003e \u003cli\u003eInstant on\/off for faster response\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eInstant Brake. \u003c\/strong\u003eThe factory incandescent 3rd brake light bulb on the Subaru Impreza lights up in a glow, which takes a moment to turn on. A modern LED upgrade provides instant response, which can alert other drivers on the road earlier, while also providing a modern LED appearance. This third brake light LED is a great upgrade in both style and function.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSelect your Quantity. \u003c\/strong\u003eAs different trim levels often come equipped with different third brake lights, we have listed bulbs individually here. Please double-check on your Impreza, and select the quantity needed to replace all of your bulbs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. This provides the most output through the red lens of the 3rd brake light, as the red lens acts as a filter, only allowing red light through.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/3rd_Brake_Light_-_Comparision_Image.jpg\" width=\"639\" height=\"170\" alt=\"3rd Brake Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP5 \/ Red","offer_id":67721585688725,"sku":"DD0030S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"921 XPR Red \/ Red","offer_id":67721585721493,"sku":"DD0395S","price":47.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/3rdbrake-2926_29754.jpg?v=1792097596"},{"product_id":"3rd-brake-light-led-for-2002-2007-subaru-impreza-wagon-one","title":"3rd Brake Light LED for 2002-2007 Subaru Impreza Wagon (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eIntense red LED illumination\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza Wagon 3rd brake light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 921 bulb size\u003c\/li\u003e \u003cli\u003eInstant on\/off for faster response\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eInstant Brake. \u003c\/strong\u003eThe factory incandescent 3rd brake light bulb on the Subaru Impreza Wagon lights up in a glow, which takes a moment to turn on. A modern LED upgrade provides instant response, which can alert other drivers on the road earlier, while also providing a modern LED appearance. This third brake light LED is a great upgrade in both style and function.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSelect your Quantity. \u003c\/strong\u003eAs different trim levels often come equipped with different third brake lights, we have listed bulbs individually here. Please double-check on your Impreza Wagon, and select the quantity needed to replace all of your bulbs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. This provides the most output through the red lens of the 3rd brake light, as the red lens acts as a filter, only allowing red light through.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/3rd_Brake_Light_-_Comparision_Image.jpg\" width=\"639\" height=\"170\" alt=\"3rd Brake Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza Wagon. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP5 \/ Red","offer_id":67721591554197,"sku":"DD0030S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"921 XPR Red \/ Red","offer_id":67721591586965,"sku":"DD0395S","price":47.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/3rdbrake-2916_29752.jpg?v=1792097623"},{"product_id":"3rd-brake-light-led-for-2006-2007-subaru-impreza","title":"3rd Brake Light LED for 2006-2007 Subaru Impreza","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eIntense red LED illumination\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza 3rd brake light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eInstant on\/off for faster response\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eInstant Brake. \u003c\/strong\u003eThe factory incandescent 3rd brake light bulb on the Subaru Impreza lights up in a glow, which takes a moment to turn on. A modern LED upgrade provides instant response, which can alert other drivers on the road earlier, while also providing a modern LED appearance. This third brake light LED is a great upgrade in both style and function.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSelect your Quantity. \u003c\/strong\u003eAs different trim levels often come equipped with different third brake lights, we have listed bulbs individually here. Please double-check on your Impreza, and select the quantity needed to replace all of your bulbs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. This provides the most output through the red lens of the 3rd brake light, as the red lens acts as a filter, only allowing red light through.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Red","offer_id":67721593749653,"sku":"DD0108S","price":27.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67721593782421,"sku":"DD0112S","price":19.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/3rdbrake-2930_128040.jpg?v=1792097626"},{"product_id":"backup-leds-for-1993-2001-subaru-impreza-pair","title":"Backup LEDs for 1993-2001 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 1156 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Subaru Impreza. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Impreza's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Cool White (6000K)","offer_id":67721600565397,"sku":"DD0003P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Cool White (6000K)","offer_id":67721600598165,"sku":"DD0006P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"1156 XPR White \/ Cool White (6000K)","offer_id":67721600630933,"sku":"DD0369P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/bckup-2926_85443.jpg?v=1792097658"},{"product_id":"backup-leds-for-2002-2011-subaru-impreza-wagon-pair","title":"Backup LEDs for 2002-2011 Subaru Impreza Wagon (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza Wagon reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Subaru Impreza Wagon. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Impreza Wagon's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Backup_Light_-_7443.jpg\" width=\"750\" height=\"150\" alt=\"7443 XPR Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza Wagon. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Cool White (6000K)","offer_id":67721619439765,"sku":"DD0109P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Cool White (6000K)","offer_id":67721619472533,"sku":"DD0113P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"7443 XPR White \/ Cool White (6000K)","offer_id":67721619505301,"sku":"DD0386P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/bckup-2916_85773.jpg?v=1792097706"},{"product_id":"backup-leds-for-2002-2007-subaru-impreza-pair","title":"Backup LEDs for 2002-2007 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Subaru Impreza. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Impreza's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Backup_Light_-_7443.jpg\" width=\"750\" height=\"150\" alt=\"7443 XPR Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Cool White (6000K)","offer_id":67721619636373,"sku":"DD0109P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Cool White (6000K)","offer_id":67721619669141,"sku":"DD0113P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"7443 XPR White \/ Cool White (6000K)","offer_id":67721619701909,"sku":"DD0386P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/bckup-2928_85783.jpg?v=1792097697"},{"product_id":"backup-leds-for-2008-2011-subaru-impreza-sedan-pair","title":"Backup LEDs for 2008-2011 Subaru Impreza Sedan (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza Sedan reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 921 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Subaru Impreza Sedan. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Impreza Sedan's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Backup_Light_-_Comparision_Image_XPR_2.jpg\" width=\"639\" height=\"170\" alt=\"XPR Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza Sedan. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP5 \/ Cool White (6000K)","offer_id":67721635037333,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP36 \/ Cool White (6000K)","offer_id":67721635070101,"sku":"DD0143P","price":47.96,"currency_code":"USD","in_stock":true},{"title":"921 XPR White \/ Cool White (6000K)","offer_id":67721635102869,"sku":"DD0394P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/921_xpr_pair_-_backup_6.jpg?v=1792097746"},{"product_id":"backup-leds-for-2012-2016-subaru-impreza-pair","title":"Backup LEDs for 2012-2016 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 921 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Subaru Impreza. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Impreza's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Backup_Light_-_Comparision_Image_XPR_2.jpg\" width=\"639\" height=\"170\" alt=\"XPR Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP5 \/ Cool White (6000K)","offer_id":67721644638357,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP36 \/ Cool White (6000K)","offer_id":67721644671125,"sku":"DD0143P","price":47.96,"currency_code":"USD","in_stock":true},{"title":"921 XPR White \/ Cool White (6000K)","offer_id":67721644703893,"sku":"DD0394P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/921_xpr_pair_-_backup_48.jpg?v=1792097765"},{"product_id":"backup-leds-for-2017-2023-subaru-impreza-pair","title":"Backup LEDs for 2017-2023 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Subaru Impreza. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Impreza's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Backup_Light_-_7443.jpg\" width=\"750\" height=\"150\" alt=\"7443 XPR Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Cool White (6000K)","offer_id":67721656369301,"sku":"DD0109P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Cool White (6000K)","offer_id":67721656402069,"sku":"DD0113P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"7443 XPR White \/ Cool White (6000K)","offer_id":67721656434837,"sku":"DD0386P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/bckup-2933_86028.jpg?v=1792097801"},{"product_id":"backup-leds-for-2024-2026-subaru-impreza-pair","title":"Backup LEDs for 2024-2026 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 921 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Subaru Impreza. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Impreza's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Backup_Light_-_Comparision_Image_XPR_2.jpg\" width=\"639\" height=\"170\" alt=\"XPR Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP5 \/ Cool White (6000K)","offer_id":67721661546645,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP36 \/ Cool White (6000K)","offer_id":67721661579413,"sku":"DD0143P","price":47.96,"currency_code":"USD","in_stock":true},{"title":"921 XPR White \/ Cool White (6000K)","offer_id":67721661612181,"sku":"DD0394P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/921_xpr_pair_-_backup_48_1.jpg?v=1792097816"},{"product_id":"dome-light-led-for-2004-2016-subaru-impreza-one","title":"Dome Light LED for 2004-2016 Subaru Impreza (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWarm or cool white LED, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza dome light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 31mm Festoon bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eReplacement LED bulbs are a simple way to improve the look and styling of the dome lights on your Subaru Impreza. Compared to the original incandescent bulbs, they will provide a brighter appearance with modern color. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColor Options.\u003c\/strong\u003e In addition to vibrant colors of blue, red, amber, and green, our dome light bulbs are available in a cool white 6000K, and warm white 3000K. Whether you want a modern cool white appearance, or a traditional warm white color with more output, we have the color to fit your needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze the exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SMF2 \/ Blue","offer_id":67721682321557,"sku":"DD0067S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Green","offer_id":67721682354325,"sku":"DD0068S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Warm White (3000K)","offer_id":67721682387093,"sku":"DD0069S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Red","offer_id":67721682419861,"sku":"DD0070S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Cool White (6000K)","offer_id":67721682452629,"sku":"DD0071S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Amber","offer_id":67721682485397,"sku":"DD0145S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Blue","offer_id":67721682518165,"sku":"DD0146S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Green","offer_id":67721682550933,"sku":"DD0147S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Warm White (3000K)","offer_id":67721682583701,"sku":"DD0148S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Red","offer_id":67721682616469,"sku":"DD0149S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Cool White (6000K)","offer_id":67721682649237,"sku":"DD0150S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Amber","offer_id":67721682682005,"sku":"DD0189S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Blue","offer_id":67721682714773,"sku":"DD0296S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Cool White (6000K)","offer_id":67721682747541,"sku":"DD0299S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Red","offer_id":67721682780309,"sku":"DD0301S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Warm White (3000K)","offer_id":67721682813077,"sku":"DD0351S","price":10.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/31mm_hp6_cool_dome_titled_11.jpg?v=1792097929"},{"product_id":"dome-light-led-for-2017-2023-subaru-impreza-one","title":"Dome Light LED for 2017-2023 Subaru Impreza (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWarm or cool white LED, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza dome light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 29mm Festoon bulb size\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eReplacement LED bulbs are a simple way to improve the look and styling of the dome lights on your Subaru Impreza. Compared to the original incandescent bulbs, they will provide a brighter appearance with modern color. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColor Options.\u003c\/strong\u003e In addition to vibrant colors of blue, red, and amber, our dome light bulbs are available in a cool white 6000K, and warm white 3000K. Whether you want a modern cool white appearance, or a traditional warm white color with more output, we have the color to fit your needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze the exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SMD12 \/ Amber","offer_id":67721702310037,"sku":"DD0145S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Blue","offer_id":67721702342805,"sku":"DD0146S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Green","offer_id":67721702375573,"sku":"DD0147S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Warm White (3000K)","offer_id":67721702408341,"sku":"DD0148S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Red","offer_id":67721702441109,"sku":"DD0149S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Cool White (6000K)","offer_id":67721702473877,"sku":"DD0150S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Amber","offer_id":67721702506645,"sku":"DD0288S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Blue","offer_id":67721702539413,"sku":"DD0289S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Cool White (6000K)","offer_id":67721702572181,"sku":"DD0292S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Red","offer_id":67721702604949,"sku":"DD0294S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Warm White (3000K)","offer_id":67721702637717,"sku":"DD0350S","price":10.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/29mm_hp6_cool_dome_titled_1.jpg?v=1792097917"},{"product_id":"elite-series-fog-lamps-for-2015-2023-subaru-impreza-w-eyesight-package-pair","title":"Elite Series Fog Lamps for 2015-2023 Subaru Impreza (w\/ Eyesight Package) (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance OEM-grade replacement for Subaru Impreza\u003c\/li\u003e\n\u003cli\u003eCustom-engineered optic provides extremely wide, intense light output\u003c\/li\u003e\n\u003cli\u003eDistinctive integrated amber backlight\u003c\/li\u003e\n\u003cli\u003eRoad-legal fog light (SAE F3 compliant)\u003c\/li\u003e\n\u003cli\u003ePlug and play main beam, no modification needed\u003c\/li\u003e\n\u003cli\u003eEngineered and assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFactory fog lights are built to meet minimum output requirements. Every aftermarket design available provides similar lackluster performance, but with an LED. The focus has been on LED appearance, not increased output. There has never been an aftermarket fog light designed from the ground up for performance - until now.\u003c\/p\u003e\n\u003cp\u003eIntroducing the Elite Series Fog Lamps: the first OE-style fog lights that were designed for true performance. With a custom-engineered patent-pending optic, multi-die automotive emitters, and high-power full-copper circuit boards, the Elite Series fog light for the Subaru Impreza delivers up to 5 times more output than halogen lamps. With a plug-and-play installation, this is one of the easiest and most effective upgrades you can make to improve your visibility in inclement weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput that Outperforms. \u003c\/strong\u003eThe Elite Series Fog Lamp is built around a highly-engineered single-piece PMMA lens. This optic was carefully designed using advanced optical simulation software to produce a light pattern that is wider than any other aftermarket fog lamp on the market, with an 80-degree spread of highly intense light. Even with this extremely wide band of light, the pattern is extremely smooth throughout, with an extremely sharp cutoff to avoid glare to other drivers, including a BMW-style “color flicker” at the very edge of the pattern. Diode Dynamics engineers accomplished all this while still meeting SAE F3 fog light standards, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Elite_Series_Foglamps_-_Comparision_Images_B.jpg\" alt=\"SS3 Beam Patterns\" width=\"639\" height=\"170\"\u003e\u003c\/p\u003e\t\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003eThe white is a 6000K color temperature, which is a true cool white output. This will perfectly match other LEDs on your vehicle, such as DRLs or running lights. The white option also offers a premium BMW-style color band at the very top of the beam pattern.\u003c\/p\u003e\n\u003cp\u003eThe selective yellow option is 3000K in color temperature, which is great for high contrast in inclement weather, or in providing a distinctive look on the road. The yellow lamp consists of a yellow multi-die LED emitter paired with a yellow-tinted lens, to provide unmatched output and optical efficiency, even with the intense yellow output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eAll Elite Series Fog Lamps come standard with an integrated amber accent light. This backlight feature fully illuminates the main lens with amber LEDs, intended to match other position, sidemarker, or corner lights on your Impreza. This feature can be wired to any constant 12-volt source for your desired vehicle function, using the included tap connector. It will shut off automatically if the main beam is activated. Check local laws and regulations for acceptable use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-On Fitment. \u003c\/strong\u003eElite Series Fog Lamps were designed using a 3D scanner and installed on the vehicle in our testing garage, so you can rest assured they will be a perfect fit. They can be installed on your Subaru Impreza in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place, using sturdy glass-fiber-reinforced brackets. With built-in adjustment, the lamps can be aimed after installation. To wire them up, a pair of waterproof plug-and-play adapters are included to connect the lights to your factory bulb sockets. Click here to learn how to aim your Elite Series Foglamps: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=p5RXq28ZOYo\" target=\"_blank\"\u003e\u003cspan style=\"color: #c00000\"\u003eHow to Aim Your Fog Lights\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembled with Quality - in the USA. \u003c\/strong\u003eElite Series Fog Lamps are assembled in the USA using OEM-grade materials, including a precision aluminum casting, UV-coated outer lens, copper-core circuit board, and multi-die automotive emitters. After being assembled by Diode Dynamics in St. Louis, Missouri, they are robotically sealed with urethane epoxy for long-lasting protection against moisture, and packaged in form-fit foam for safe transportation. No expense has been spared, from materials to assembly, right here in America.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability - Backed for 8 Years. \u003c\/strong\u003eLike our popular Stage Series lineup, Elite Series LED lamps have been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components on your Impreza. With integrated moisture-proof vents, the lamps can “breath” with changes in temperature, maintaining a strong seal over time. And with built-in circuit protection for voltage spikes and reverse polarity, these lights will keep working for years. They are backed by an industry-leading 8 year limited warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White (6000K)","offer_id":67721808347285,"sku":"DD5128P","price":207.96,"currency_code":"USD","in_stock":true},{"title":"Yellow (3000K)","offer_id":67721808380053,"sku":"DD5129P","price":207.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color (6000K\/3000K)","offer_id":67721808412821,"sku":"DD5183P","price":255.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/esf-2932_146564.jpg?v=1792098083"},{"product_id":"fog-light-leds-for-1999-2007-subaru-impreza-pair","title":"Fog Light LEDs for 1999-2007 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Impreza fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Subaru Impreza. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Subaru Impreza are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your Impreza without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White (6000K)","offer_id":67721816178837,"sku":"DD0471P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"Yellow (3000K)","offer_id":67721816211605,"sku":"DD0472P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0471p_sl2_h3_white_pair_fog_c_3abqzzrktavvnphd_bc1da9c2-6d44-46aa-8b83-fdf9dc34fc20.jpg?v=1792098111"},{"product_id":"fog-light-leds-for-2008-2011-subaru-impreza-pair","title":"Fog Light LEDs for 2008-2011 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Impreza fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Subaru Impreza. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Subaru Impreza are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your Impreza without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48 \/ Cool White (6000K)","offer_id":67721858613397,"sku":"DD0136P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Cool White (6000K)","offer_id":67721858646165,"sku":"DD0142P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Cool White (6000K)","offer_id":67721858678933,"sku":"DD0465P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Yellow (3000K)","offer_id":67721858711701,"sku":"DD0466P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0465p_sl2_9006_9012_white_pair_fog_c_oo5csot1pefiwelm_5ceb0ed3-2e96-44db-b4e8-af6ce41510bf.jpg?v=1792098235"},{"product_id":"fog-light-leds-for-2012-2015-subaru-impreza-pair","title":"Fog Light LEDs for 2012-2015 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Impreza fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Subaru Impreza. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Subaru Impreza are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your Impreza without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48 \/ Cool White (6000K)","offer_id":67721878438037,"sku":"DD0167P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Cool White (6000K)","offer_id":67721878470805,"sku":"DD0173P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Cool White (6000K)","offer_id":67721878503573,"sku":"DD0477P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Yellow (3000K)","offer_id":67721878536341,"sku":"DD0478P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0477p_sl2_5202_psx24w_white_pair_fog_c_bfcpcuj4xuzmgotl_9ecfd16f-e467-40a2-8309-03b1624683de.jpg?v=1792098296"},{"product_id":"fog-light-leds-for-2015-2023-subaru-impreza-w-eyesight-package-pair","title":"Fog Light LEDs for 2015-2023 Subaru Impreza (w\/ Eyesight Package) (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Impreza w\/ Eyesight Package fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Subaru Impreza w\/ Eyesight Package. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your Impreza w\/ Eyesight Package.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Subaru Impreza w\/ Eyesight Package are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your Impreza w\/ Eyesight Package without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48 \/ Cool White (6000K)","offer_id":67721892266133,"sku":"DD0158P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Cool White (6000K)","offer_id":67721892298901,"sku":"DD0165P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Cool White (6000K)","offer_id":67721892331669,"sku":"DD0467P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Yellow (3000K)","offer_id":67721892364437,"sku":"DD0468P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0467p_sl2_h11_h8_h9_white_pair_fog_c_khe7b0mauqopsmrp_6e5e64f0-c1c9-4960-9b7c-a0f79a440613.jpg?v=1792098327"},{"product_id":"fog-light-leds-for-2016-2023-subaru-impreza-w-o-eyesight-package-pair","title":"Fog Light LEDs for 2016-2023 Subaru Impreza (w\/o Eyesight Package) (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Impreza w\/o Eyesight Package fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Subaru Impreza w\/o Eyesight Package. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your Impreza w\/o Eyesight Package.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Subaru Impreza w\/o Eyesight Package are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your Impreza w\/o Eyesight Package without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48 \/ Cool White (6000K)","offer_id":67721893707925,"sku":"DD0167P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Cool White (6000K)","offer_id":67721893740693,"sku":"DD0173P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Cool White (6000K)","offer_id":67721893773461,"sku":"DD0477P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Yellow (3000K)","offer_id":67721893806229,"sku":"DD0478P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0477p_sl2_5202_psx24w_white_pair_fog_c_bfcpcuj4xuzmgotl_72000976-fb80-40c6-9667-aa774ee2595e.jpg?v=1792098334"},{"product_id":"front-turn-signal-leds-for-1993-2003-subaru-impreza-pair","title":"Front Turn Signal LEDs for 1993-2003 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 1156 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Impreza illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Turn_Signal_-_Comparision_Image.jpg\" alt=\"Front Turn Signal Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer an amber color option, which is correct to SAE\/DOT \"amber\" requirements. Whether you have a clear lens or an amber reflector over the turn signal bulb on your Impreza, amber is the correct emitter color for maximum turn signal output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Impreza looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Impreza, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67721913860245,"sku":"DD0001P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67721913893013,"sku":"DD0004P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67721913925781,"sku":"DD0007P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/frnturn-2926_104778.jpg?v=1792098354"},{"product_id":"front-turn-signal-leds-for-2004-2007-subaru-impreza-pair","title":"Front Turn Signal LEDs for 2004-2007 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Impreza illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Turn_Signal_-_Comparision_Image.jpg\" alt=\"Front Turn Signal Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer an amber color option, which is correct to SAE\/DOT \"amber\" requirements. Whether you have a clear lens or an amber reflector over the turn signal bulb on your Impreza, amber is the correct emitter color for maximum turn signal output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Impreza looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Impreza, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67721942761621,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67721942794389,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67721942827157,"sku":"DD0114P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/frnturn-2929_106338.jpg?v=1792098438"},{"product_id":"front-turn-signal-leds-for-2009-2011-subaru-impreza-pair","title":"Front Turn Signal LEDs for 2009-2011 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 1157 bulb size\u003c\/li\u003e \u003cli\u003eGreater output than factory bulbs\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Impreza illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDual Brightness. \u003c\/strong\u003eThe Impreza uses a 1157 dual-filament bulb. They light up with low power as parking lights, then they get brighter when the turn signal or hazards are activated. The brightness ratio of your factory bulbs is traditionally 15:100, or 15% lumen output for the dim function. Diode Dynamics bulbs are designed to match this, so there is enough distinction between \"low\" and \"high\" brightness levels. As with all Diode Dynamics LED bulbs, these turn signal bulbs are rated with accurate, measured lumen figures, not calculations or guesses. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchback. \u003c\/strong\u003eThe dual-filament function of your factory turn signal bulbs gives you the ability to choose a unique LED bulb model: switchback! These bulbs illuminate in a bright white for the \"low\" power setting for your running\/parking light, then switch to intense amber when the turn signals are activated. When the turn signal is switched off, they return to the original white output. The result is a modern dual-color effect, as seen on many high-end vehicles on the road. Please note: in order to properly see the white, you must have clear reflectors\/lenses over the turn signal bulb. If your Impreza has amber reflectors, you might be able to find clear aftermarket ones to complete this upgrade!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Impreza looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Impreza, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67721960816789,"sku":"DD0010P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP24 \/ Switchback Cool White and Amber","offer_id":67721960849557,"sku":"DD0012P","price":63.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67721960882325,"sku":"DD0013P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67721960915093,"sku":"DD0015P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/frnturn-2931_105312.jpg?v=1792098497"},{"product_id":"front-turn-signal-leds-for-2012-2016-subaru-impreza-pair","title":"Front Turn Signal LEDs for 2012-2016 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Impreza illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Turn_Signal_-_Comparision_Image.jpg\" alt=\"Front Turn Signal Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer an amber color option, which is correct to SAE\/DOT \"amber\" requirements. Whether you have a clear lens or an amber reflector over the turn signal bulb on your Impreza, amber is the correct emitter color for maximum turn signal output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Impreza looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Impreza, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67721971466389,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67721971499157,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67721971531925,"sku":"DD0114P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/frnturn-2932_106626.jpg?v=1792098518"},{"product_id":"front-turn-signal-leds-for-2017-2026-subaru-impreza-pair","title":"Front Turn Signal LEDs for 2017-2026 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Impreza illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Turn_Signal_-_Comparision_Image.jpg\" alt=\"Front Turn Signal Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer an amber color option, which is correct to SAE\/DOT \"amber\" requirements. Whether you have a clear lens or an amber reflector over the turn signal bulb on your Impreza, amber is the correct emitter color for maximum turn signal output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Impreza looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Impreza, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67721988571285,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67721988604053,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0107p_7443_hp11_amber_pair_-_front_turn_1.jpg?v=1792098559"},{"product_id":"glove-box-leds-for-2004-2007-subaru-impreza","title":"Glove Box LEDs for 2004-2007 Subaru Impreza","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern cool white appearance, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza glove box bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 74 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eThis replacement LED bulb is a great way to improve the look and function of the glove box lights on your Subaru Impreza. They'll provide a modern, premium appearance compared to the original incandescent bulb. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SMD1 \/ Amber","offer_id":67722014654613,"sku":"DD0118S","price":2.36,"currency_code":"USD","in_stock":true},{"title":"SMD1 \/ Blue","offer_id":67722014687381,"sku":"DD0119S","price":2.36,"currency_code":"USD","in_stock":true},{"title":"SMD1 \/ Green","offer_id":67722014720149,"sku":"DD0120S","price":2.36,"currency_code":"USD","in_stock":true},{"title":"SMD1 \/ Warm White (3000K)","offer_id":67722014752917,"sku":"DD0121S","price":2.36,"currency_code":"USD","in_stock":true},{"title":"SMD1 \/ Red","offer_id":67722014785685,"sku":"DD0122S","price":2.36,"currency_code":"USD","in_stock":true},{"title":"SMD1 \/ Cool White (6000K)","offer_id":67722014818453,"sku":"DD0123S","price":2.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/glv-2929_117669.jpg?v=1792098612"},{"product_id":"hi-lo-beam-led-headlight-bulbs-for-2002-2003-subaru-impreza-wrx-pair","title":"Hi\/Lo Beam LED Headlight Bulbs for 2002-2003 Subaru Impreza\/WRX (pair)","description":"\u003csection\u003e\u003ch3\u003eHi\/Lo Beam LED Headlight Bulbs for 2002-2003 Subaru Impreza\/WRX (pair)\u003c\/h3\u003e\n\u003cp\u003eUpgrade a compatible 9007 headlight application with your choice of SL2 or SL2 Pro LED bulbs in 6000K Cool White. This listing is for a pair of replacement bulbs; select the design that matches your preferred output and cooling system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSL2:\u003c\/strong\u003e 1100 steady-state lumens per bulb, 15.4 watts, fanless passive cooling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSL2 Pro:\u003c\/strong\u003e 2385 steady-state lumens per bulb, 22.2 watts, integrated top-mounted cooling fan.\u003c\/li\u003e\n\u003cli\u003eBoth designs operate at 9–30V DC, use automotive-grade LED emitters, and include an integrated driver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck the factory bulb size and headlamp option before ordering. Vehicle trims and optional lighting packages may differ. Bulbs are engineered for a focused beam pattern and are backed by a limited lifetime warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication notice.\u003c\/strong\u003e LED replacement bulbs are not compliant with DOT \/ FMVSS 108 for U.S. headlight use and are not street legal in U.S. headlights. Off-road use only. International regulations vary.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SL2 (1100 lumens)","offer_id":67722030612629,"sku":"DD0487P","price":125.96,"currency_code":"USD","in_stock":true},{"title":"SL2 Pro (2400 lumens)","offer_id":67722030645397,"sku":"DD0490P","price":174.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/sl2_pro_9007_led_white_labeled_hilo_bc8a2e5b-7844-42b7-a7d3-9139a5ec00a5.jpg?v=1792098631"},{"product_id":"high-beam-led-headlight-bulbs-for-2004-2023-subaru-impreza-pair","title":"High Beam LED Headlight Bulbs for 2004-2023 Subaru Impreza (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\t\n\u003cli\u003eDirect replacement for Subaru Impreza High Beam headlight bulbs with compact fitment.\u003c\/li\u003e\n\u003cli\u003eAdvanced LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003eInternal cooling for superior reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003cli\u003eBacked by limited lifetime warranty.\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSL2 and SL2 Pro LED Headlight\u003c\/h3\u003e\n\u003cp\u003eDiode Dynamics has set the standard for LED bulbs with a history of solutions engineered to provide a true increase in performance. Thanks to improvements in technology, we are excited to redefine the standard once again. Introducing the SL2 and SL2 Pro LED headlight bulbs! The new SL2 and SL2 Pro LED bulbs have been carefully designed as a direct plug-and-play replacement for your Subaru Impreza headlight bulbs, providing a significant increase in output, in a compact package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext-Generation TST Technology. \u003c\/strong\u003eThe SL2 Pro features new thermal separation technology (TST) LEDs. Unlike a traditional LED chip, TST LEDs are designed with electrical connections on the top. This means the entire bottom surface of the LED can be dedicated to channeling thermal energy out and away from the LED. This lowers thermal resistance, allowing the SL2 Pro to run at higher power levels than traditional LED bulbs, while maintaining focus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Optical Focus.\u003c\/strong\u003e The headlight housings on your Subaru Impreza are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright the bulb is - you won't have a focused hotspot of light to shine down the road where you need it. Instead, you'll have more glare, which lights up the foreground and makes it harder to see in the distance. The SL2 and SL2 Pro LED bulbs were engineered to focus light just like your Impreza original bulb, matching the original beam pattern while still providing an increase in total output. These days, some LED bulbs on the market use the smallest LEDs possible to accomplish focus, but this leads to \"over-focus\", where you begin seeing streaks, lines, and harsh cutoffs in the beam pattern. Instead of using the smallest LEDs possible, the SL2 and SL2 Pro LEDs were optimized to provide a smooth and comfortable beam pattern, while still maintaining focus and increased output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Cooling.\u003c\/strong\u003e The SL2 Pro features an integrated top-mounted fan for superior thermal management and reliability. Since the fan is sealed inside the housing, there's no concerns about damage from dust or moisture over time. And with the fan on the top of the bulb, the cooling happens right next to the LEDs - the source of the heat. While standard LED bulbs use heat pipes and other tricks to move heat to the bottom of the bulb, where it's cooled off, the SL2 Pro keeps it simple and more efficient. This provides maximum cooling efficiency and output.\u003c\/p\u003e\n\u003cp\u003eThe SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Integrated Design. \u003c\/strong\u003eUnlike traditional LED bulbs, the SL2 and SL2 Pro LED bulbs don't have any external drivers. Along with their compact size, that means excellent fitment inside your Impreza's housing, without the need to tuck away bulky drivers. Installation is easy - simply remove your factory bulbs and these LED bulbs will fit in their place, with a plug-and-play connector. And if your original bulb is installed at an angle, no worries - SL2 Pro has you covered with an adjustable collar that can be securely locked at the correct position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 and SL2 Pro LED was engineered for reliability, from its full metal construction to the fully-sealed design. The SL2 and SL2 Pro were put through their paces in our environmental testing chambers - where the bulb lasted through repeated thermal cycles from -40 through 85 degrees Celsius (-40 to 185F), along with a range of other environmental tests. They're also designed with transient protection, to prevent premature failure from electrical spikes in the vehicle. They're even compatible up to 30V! We're so confident in the SL2 and SL2 Pro LED bulbs, that they're backed by an industry-leading limited LIFETIME warranty. See details at \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\n\u003ch3\u003eBulb Options\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e9005 SL2\u003c\/strong\u003e - \u003ca href=\"https:\/\/www.diodedynamics.com\/9005-sl2-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e\n\u003cli\u003e1400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e9005 SL2 Pro\u003c\/strong\u003e\u003ca href=\"https:\/\/www.diodedynamics.com\/9005-sl2-pro-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced TST LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003e2400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003e6000K cool white color.\u003c\/li\u003e\n\u003cli\u003eFully integrated design, no wires or external drivers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"SL2","offer_id":67722045915285,"sku":"DD0463P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 Pro (2400 lumens)","offer_id":67722045948053,"sku":"DD0481P","price":153.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2929-high-ledheadlight_213925.jpg?v=1792098707"},{"product_id":"license-plate-leds-for-1993-2026-subaru-impreza-pair","title":"License Plate LEDs for 1993-2026 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Impreza license plate bulbs\u003c\/li\u003e \u003cli\u003eIncreased output with modern LED appearance\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eUpgrade. \u003c\/strong\u003eAdd a modern appearance to your Subaru Impreza with these replacement LED bulbs! These bright LEDs are available in a number of colors including cool white, to replace the factory yellowish incandescent bulbs. If you've been looking for a simple way to upgrade your Impreza, you've found it!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_License.jpg\" alt=\"License Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Warm White (3000K)","offer_id":67722076389525,"sku":"DD0020P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Natural White (4000K)","offer_id":67722076422293,"sku":"DD0021P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Pure White (5000K)","offer_id":67722076455061,"sku":"DD0022P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67722076487829,"sku":"DD0024P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67722076520597,"sku":"DD0027P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Natural White (4000K)","offer_id":67722076553365,"sku":"DD0028P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Pure White (5000K)","offer_id":67722076586133,"sku":"DD0029P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67722076618901,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Warm White (3000K)","offer_id":67722076651669,"sku":"DD0035P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Cool White (6000K)","offer_id":67722076684437,"sku":"DD0037P","price":7.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/lic-2926_84614.jpg?v=1792098855"},{"product_id":"low-beam-led-headlight-bulbs-for-2004-2005-subaru-impreza-pair","title":"Low Beam LED Headlight Bulbs for 2004-2005 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Impreza Low Beam headlight bulbs with compact fitment.\u003c\/li\u003e \u003cli\u003eAdvanced LED Technology for industry-leading performance.\u003c\/li\u003e \u003cli\u003eInternal cooling for superior reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eBacked by limited lifetime warranty.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSL2 LED Headlight\u003c\/h3\u003e \u003cp\u003eDiode Dynamics has set the standard for LED bulbs with a history of solutions engineered to provide a true increase in performance. Thanks to improvements in technology, we are excited to redefine the standard once again. Introducing the SL2 LED headlight bulbs! The new SL2 LED bulbs have been carefully designed as a direct plug-and-play replacement for your Subaru Impreza headlight bulbs, providing a significant increase in output, in a compact package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003e The headlight housings on your Subaru Impreza are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright the bulb is - you won't have a focused hotspot of light to shine down the road where you need it. Instead, you'll have more glare, which lights up the foreground and makes it harder to see in the distance. The SL2 LED bulbs were engineered to focus light just like your Impreza's original bulb, matching the original beam pattern while still providing an increase in total output. These days, some LED bulbs on the market use the smallest LEDs possible to accomplish focus, but this leads to \"over-focus\", where you begin seeing streaks, lines, and harsh cutoffs in the beam pattern. Instead of using the smallest LEDs possible, the SL2 LEDs were optimized to provide a smooth and comfortable beam pattern, while still maintaining focus and increased output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFanless Design.\u003c\/strong\u003e You may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside your housing without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was engineered for reliability, from its full metal construction to the fully-sealed design. The SL2 was put through it's paces in our environmental testing chambers - where the bulb lasted through repeated thermal cycles from -40 through 85 degrees Celsius (-40 to 185F), along with a range of other environmental tests. They're also designed with transient protection, to prevent premature failure from electrical spikes in the vehicle. They're even compatible up to 30V! We're so confident in the SL2 LED bulbs, that they're backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SL2","offer_id":67722213949589,"sku":"DD0469P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2929-low-ledheadlight_251775.jpg?v=1792099075"},{"product_id":"low-beam-led-headlight-bulbs-for-2006-2007-subaru-impreza-pair","title":"Low Beam LED Headlight Bulbs for 2006-2007 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Impreza Low Beam headlight bulbs with compact fitment.\u003c\/li\u003e \u003cli\u003eAdvanced LED Technology for industry-leading performance.\u003c\/li\u003e \u003cli\u003eInternal cooling for superior reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eBacked by limited lifetime warranty.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eSL2 and SL2 Pro LED Headlight\u003c\/h3\u003e \u003cp\u003eDiode Dynamics has set the standard for LED bulbs with a history of solutions engineered to provide a true increase in performance. Thanks to improvements in technology, we are excited to redefine the standard once again. Introducing the SL2 and SL2 Pro LED headlight bulbs! The new SL2 and SL2 Pro LED bulbs have been carefully designed as a direct plug-and-play replacement for your Subaru Impreza headlight bulbs, providing a significant increase in output, in a compact package.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNext-Generation TST Technology. \u003c\/strong\u003eThe SL2 Pro features new thermal separation technology (TST) LEDs. Unlike a traditional LED chip, TST LEDs are designed with electrical connections on the top. This means the entire bottom surface of the LED can be dedicated to channeling thermal energy out and away from the LED. This lowers thermal resistance, allowing the SL2 Pro to run at higher power levels than traditional LED bulbs, while maintaining focus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Optical Focus.\u003c\/strong\u003e The headlight housings on your Subaru Impreza are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright the bulb is - you won't have a focused hotspot of light to shine down the road where you need it. Instead, you'll have more glare, which lights up the foreground and makes it harder to see in the distance. The SL2 and SL2 Pro LED bulbs were engineered to focus light just like your Impreza original bulb, matching the original beam pattern while still providing an increase in total output. These days, some LED bulbs on the market use the smallest LEDs possible to accomplish focus, but this leads to \"over-focus\", where you begin seeing streaks, lines, and harsh cutoffs in the beam pattern. Instead of using the smallest LEDs possible, the SL2 and SL2 Pro LEDs were optimized to provide a smooth and comfortable beam pattern, while still maintaining focus and increased output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInternal Cooling.\u003c\/strong\u003e While other LED bulbs use bulky, bottom-mounted fans which can cause fitment issues, the SL2 Pro features an integrated top-mounted fan for superior thermal management and reliability. Since the fan is sealed inside the housing, there's no concerns about damage from dust or moisture over time. And with the fan on the top of the bulb, the cooling happens right next to the LEDs - the source of the heat. This provides maximum cooling efficiency and output.\u003c\/p\u003e \u003cp\u003eThe SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Integrated Design. \u003c\/strong\u003eUnlike traditional LED bulbs, the SL2 and SL2 Pro LED bulbs don't have any external drivers. Along with their compact size, that means excellent fitment inside your Impreza's housing, without the need to tuck away bulky drivers. Installation is easy - simply remove your factory bulbs and these LED bulbs will fit in their place, with a plug-and-play connector.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 and SL2 Pro LED was engineered for reliability, from its full metal construction to the fully-sealed design. The SL2 and SL2 Pro were put through their paces in our environmental testing chambers - where the bulb lasted through repeated thermal cycles from -40 through 85 degrees Celsius (-40 to 185F), along with a range of other environmental tests. They're also designed with transient protection, to prevent premature failure from electrical spikes in the vehicle. They're even compatible up to 30V! We're so confident in the SL2 and SL2 Pro LED bulbs, that they're backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SL2","offer_id":67722215948437,"sku":"DD0473P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 Pro (1800 lumens)","offer_id":67722215981205,"sku":"DD0484P","price":153.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2930-low-ledheadlight_248922.jpg?v=1792099091"},{"product_id":"low-beam-led-headlight-bulbs-for-2008-2023-subaru-impreza-pair","title":"Low Beam LED Headlight Bulbs for 2008-2023 Subaru Impreza (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\t\n\u003cli\u003eDirect replacement for Subaru Impreza Low Beam headlight bulbs with compact fitment.\u003c\/li\u003e\n\u003cli\u003eAdvanced LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003eInternal cooling for superior reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003cli\u003eBacked by limited lifetime warranty.\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSL2 and SL2 Pro LED Headlight\u003c\/h3\u003e\n\u003cp\u003eDiode Dynamics has set the standard for LED bulbs with a history of solutions engineered to provide a true increase in performance. Thanks to improvements in technology, we are excited to redefine the standard once again. Introducing the SL2 and SL2 Pro LED headlight bulbs! The new SL2 and SL2 Pro LED bulbs have been carefully designed as a direct plug-and-play replacement for your Subaru Impreza headlight bulbs, providing a significant increase in output, in a compact package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext-Generation TST Technology. \u003c\/strong\u003eThe SL2 Pro features new thermal separation technology (TST) LEDs. Unlike a traditional LED chip, TST LEDs are designed with electrical connections on the top. This means the entire bottom surface of the LED can be dedicated to channeling thermal energy out and away from the LED. This lowers thermal resistance, allowing the SL2 Pro to run at higher power levels than traditional LED bulbs, while maintaining focus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Optical Focus.\u003c\/strong\u003e The headlight housings on your Subaru Impreza are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright the bulb is - you won't have a focused hotspot of light to shine down the road where you need it. Instead, you'll have more glare, which lights up the foreground and makes it harder to see in the distance. The SL2 and SL2 Pro LED bulbs were engineered to focus light just like your Impreza original bulb, matching the original beam pattern while still providing an increase in total output. These days, some LED bulbs on the market use the smallest LEDs possible to accomplish focus, but this leads to \"over-focus\", where you begin seeing streaks, lines, and harsh cutoffs in the beam pattern. Instead of using the smallest LEDs possible, the SL2 and SL2 Pro LEDs were optimized to provide a smooth and comfortable beam pattern, while still maintaining focus and increased output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Cooling.\u003c\/strong\u003e The SL2 Pro features an integrated top-mounted fan for superior thermal management and reliability. Since the fan is sealed inside the housing, there's no concerns about damage from dust or moisture over time. And with the fan on the top of the bulb, the cooling happens right next to the LEDs - the source of the heat. While standard LED bulbs use heat pipes and other tricks to move heat to the bottom of the bulb, where it's cooled off, the SL2 Pro keeps it simple and more efficient. This provides maximum cooling efficiency and output.\u003c\/p\u003e\n\u003cp\u003eThe SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Integrated Design. \u003c\/strong\u003eUnlike traditional LED bulbs, the SL2 and SL2 Pro LED bulbs don't have any external drivers. Along with their compact size, that means excellent fitment inside your Impreza's housing, without the need to tuck away bulky drivers. Installation is easy - simply remove your factory bulbs and these LED bulbs will fit in their place, with a plug-and-play connector. And if your original bulb is installed at an angle, no worries - SL2 Pro has you covered with an adjustable collar that can be securely locked at the correct position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 and SL2 Pro LED was engineered for reliability, from its full metal construction to the fully-sealed design. The SL2 and SL2 Pro were put through their paces in our environmental testing chambers - where the bulb lasted through repeated thermal cycles from -40 through 85 degrees Celsius (-40 to 185F), along with a range of other environmental tests. They're also designed with transient protection, to prevent premature failure from electrical spikes in the vehicle. They're even compatible up to 30V! We're so confident in the SL2 and SL2 Pro LED bulbs, that they're backed by an industry-leading limited LIFETIME warranty. See details at \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\n\u003ch3\u003eBulb Options\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eH11 SL2\u003c\/strong\u003e - \u003ca href=\"https:\/\/www.diodedynamics.com\/h11-sl2-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e\n\u003cli\u003e1400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eH11 SL2 Pro\u003c\/strong\u003e - \u003ca href=\"https:\/\/www.diodedynamics.com\/h11-sl2-pro-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced TST LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003e2400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003e6000K cool white color.\u003c\/li\u003e\n\u003cli\u003eFully integrated design, no wires or external drivers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"SL2","offer_id":67722221289621,"sku":"DD0467P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 Pro (2400 lumens)","offer_id":67722221322389,"sku":"DD0483P","price":153.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2931-low-ledheadlight_210984.jpg?v=1792099107"},{"product_id":"map-light-leds-for-2004-2016-subaru-impreza-pair","title":"Map Light LEDs for 2004-2016 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern cool white appearance, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza map light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 31mm Festoon bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eThis replacement LED bulb is a great way to improve the look and function of the map lights on your Subaru Impreza. They'll provide a modern, premium appearance compared to the original incandescent bulb. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_Map_-_SMF2_vs_HP6.jpg\" width=\"639\" height=\"170\" alt=\"Festoon Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SMF2 \/ Blue","offer_id":67722266804373,"sku":"DD0067P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Green","offer_id":67722266837141,"sku":"DD0068P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Warm White (3000K)","offer_id":67722266869909,"sku":"DD0069P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Red","offer_id":67722266902677,"sku":"DD0070P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Cool White (6000K)","offer_id":67722266935445,"sku":"DD0071P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Amber","offer_id":67722266968213,"sku":"DD0145P","price":23.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Blue","offer_id":67722267000981,"sku":"DD0146P","price":23.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Green","offer_id":67722267033749,"sku":"DD0147P","price":23.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Warm White (3000K)","offer_id":67722267066517,"sku":"DD0148P","price":23.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Red","offer_id":67722267099285,"sku":"DD0149P","price":23.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Cool White (6000K)","offer_id":67722267132053,"sku":"DD0150P","price":23.96,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Amber","offer_id":67722267164821,"sku":"DD0189P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Amber","offer_id":67722267197589,"sku":"DD0295P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Blue","offer_id":67722267230357,"sku":"DD0296P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Cool White (6000K)","offer_id":67722267263125,"sku":"DD0299P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Red","offer_id":67722267295893,"sku":"DD0301P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Warm White (3000K)","offer_id":67722267328661,"sku":"DD0351P","price":19.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/31mm_hp6_cool_pair_map_titled_14.jpg?v=1792099270"},{"product_id":"map-light-leds-for-2017-2023-subaru-impreza-pair","title":"Map Light LEDs for 2017-2023 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern cool white appearance, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza map light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 29mm Festoon bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eThis replacement LED bulb is a great way to improve the look and function of the map lights on your Subaru Impreza. They'll provide a modern, premium appearance compared to the original incandescent bulb. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_Map_-_SMF2_vs_HP6.jpg\" width=\"639\" height=\"170\" alt=\"Festoon Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Amber \/ Pair","offer_id":67722349641877,"sku":"DD0288P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Pair","offer_id":67722349674645,"sku":"DD0289P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"Cool White (6000K) \/ Pair","offer_id":67722349707413,"sku":"DD0292P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"Red \/ Pair","offer_id":67722349740181,"sku":"DD0294P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"Warm White (3000K) \/ Pair","offer_id":67722349772949,"sku":"DD0350P","price":19.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/29mm_hp6_cool_pair_map_titled_1.jpg?v=1792099313"},{"product_id":"rear-turn-signal-leds-for-2004-2007-subaru-impreza-wagon-pair","title":"Rear Turn Signal LEDs for 2004-2007 Subaru Impreza Wagon (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza Wagon rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 1157 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Impreza Wagon illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Impreza Wagon.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Rear_Turn_Signal_-_Comparision_Image.jpg\" alt=\"Amber Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we offer both a red and amber option, which meet SAE\/DOT \"amber\" and \"red\" requirements. If you have a clear lens or an amber reflector over the turn signal bulb on your Impreza Wagon, amber is the correct emitter color for maximum turn signal output. If your vehicle has a red lens over the rear turn signal, then red is the correct emitter for you.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Impreza Wagon looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Impreza Wagon, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza Wagon. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67722410754197,"sku":"DD0010P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP11 \/ Red","offer_id":67722410786965,"sku":"DD0011P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67722410819733,"sku":"DD0013P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722410852501,"sku":"DD0014P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67722410885269,"sku":"DD0015P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67722410918037,"sku":"DD0016P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/rerturn-2916_109692.jpg?v=1792099482"},{"product_id":"rear-turn-signal-leds-for-2008-2016-subaru-impreza-pair","title":"Rear Turn Signal LEDs for 2008-2016 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Impreza illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Rear_Turn_Signal_-_Comparision_Image.jpg\" alt=\"Amber Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we offer both a red and amber option, which meet SAE\/DOT \"amber\" and \"red\" requirements. If you have a clear lens or an amber reflector over the turn signal bulb on your Impreza, amber is the correct emitter color for maximum turn signal output. If your vehicle has a red lens over the rear turn signal, then red is the correct emitter for you.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Impreza looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Impreza, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67722438115477,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP11 \/ Red","offer_id":67722438148245,"sku":"DD0108P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67722438181013,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722438213781,"sku":"DD0112P","price":39.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/rerturn-2930_111177.jpg?v=1792099522"},{"product_id":"rear-turn-signal-leds-for-2017-2026-subaru-impreza-pair","title":"Rear Turn Signal LEDs for 2017-2026 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Impreza illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Rear_Turn_Signal_-_Comparision_Image.jpg\" alt=\"Amber Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we offer both a red and amber option, which meet SAE\/DOT \"amber\" and \"red\" requirements. If you have a clear lens or an amber reflector over the turn signal bulb on your Impreza, amber is the correct emitter color for maximum turn signal output. If your vehicle has a red lens over the rear turn signal, then red is the correct emitter for you.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Impreza looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Impreza, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67722473963669,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP11 \/ Red","offer_id":67722473996437,"sku":"DD0108P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67722474029205,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722474061973,"sku":"DD0112P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67722474094741,"sku":"DD0114P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67722474127509,"sku":"DD0115P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/rerturn-2932_111240.jpg?v=1792099610"},{"product_id":"sidemarker-leds-for-1993-2026-subaru-impreza-pair","title":"Sidemarker LEDs for 1993-2026 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED illumination\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza sidemarker light bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Upgrade. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the function and longevity of the sidemarkers on your Subaru Impreza. They'll provide modern illumination with long lifespan compared to the original incandescent bulbs. The installation is straightforward, with just a bulb swap - making it a simple upgrade for the Impreza's lighting setup.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChoose Your Color. \u003c\/strong\u003eYou'll see that there are multiple color options for these bulbs. Please select what you need for your setup! If you have amber lenses in the front, select amber bulbs in order to maximize output. If you have clear front reflectors, like found in many aftermarket headlamps, you can use white or amber bulbs. For the rear, you'll always want to select red bulbs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFront and Rear. \u003c\/strong\u003eThis listing includes one pair of bulbs. If you need both front and rear bulbs, please add one of each to your cart in each respective color. You'll always need red in the rear, and amber or white bulbs are for the front of the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Amber","offer_id":67722547953813,"sku":"DD0018P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Warm White (3000K)","offer_id":67722547986581,"sku":"DD0020P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Red","offer_id":67722548019349,"sku":"DD0023P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67722548052117,"sku":"DD0024P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Amber","offer_id":67722548084885,"sku":"DD0025P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67722548117653,"sku":"DD0027P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Red","offer_id":67722548150421,"sku":"DD0030P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67722548183189,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Amber","offer_id":67722548215957,"sku":"DD0032P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Warm White (3000K)","offer_id":67722548248725,"sku":"DD0035P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Red","offer_id":67722548281493,"sku":"DD0036P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Cool White (6000K)","offer_id":67722548314261,"sku":"DD0037P","price":7.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/sid-2926_117116.jpg?v=1792099808"},{"product_id":"ss3-led-fog-light-kit-for-2012-2014-subaru-impreza","title":"SS3 LED Fog Light Kit for 2012-2014 Subaru Impreza","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for Subaru Impreza fog lamps\u003c\/li\u003e\n\u003cli\u003eSAE-compliant road-legal output\u003c\/li\u003e\n\u003cli\u003eIncludes round bezel, for factory-style appearance\u003c\/li\u003e\n\u003cli\u003ePlug and play, no modification needed\u003c\/li\u003e\n\u003cli\u003eAdvanced TIR optics provide high efficiency and focus\u003c\/li\u003e\n\u003cli\u003eDurable powdercoated aluminum die-cast\u003c\/li\u003e\n\u003cli\u003eEngineered and Assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOverview. \u003c\/strong\u003eUpgrade the fog lights on your Subaru Impreza with our SS3 Fog Light Bracket Kit! Featuring higher output intensity than any other 3” light on the market, these LED pods have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a durable package. With the included round bezel, the SS3 Fog Kit has a clean, factory-style appearance, only much brighter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug and Play. \u003c\/strong\u003eThanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed on your Subaru Impreza in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place! Wire adapters are included to connect the lights to your factory bulb sockets - no additional wiring needed!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SS3 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SS3 serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the SS3 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Compliant. \u003c\/strong\u003eAll Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it’s great for general illumination as well. Rather than a traditional \"spot\" pattern, the Stage Series Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"FineLine Optic\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog \u003c\/strong\u003e uses our distinctive FineLine optic design, and provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle. Choose cool white, selective yellow, or Dual-Color output to match your needs and the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_C1_Beam_Patterns_-_SAE_Fog_Standard_Description_B_1.jpg\" alt=\"SS3 Beam Patterns\" width=\"785\" height=\"272\"\u003e\u003c\/p\u003e\n\u003cp\u003eWhen installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving\/Auxiliary High Beam Light, and the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eThe Stage Series 3\" LED Pod features a distinctive backlight, in a brilliant amber color. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMultiple Power Levels. \u003c\/strong\u003eStage Series LED pods are available in several power levels to suit your needs. Sport provides dependable performance and is a great entry-level upgrade. Dual-Color delivers output between Sport and Pro, with selectable white and yellow SAE fog output in a single lamp. Pro steps up the intensity for greater visibility, while Max delivers the highest output available for those seeking maximum performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS3_LED_Pod_-_Comparsion_Images_Map.jpg\" width=\"641\" height=\"171\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SS3 Sport \/ White SAE Fog","offer_id":67722788602005,"sku":"DD6980","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ Yellow SAE Fog","offer_id":67722788634773,"sku":"DD6981","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ White SAE Fog","offer_id":67722788667541,"sku":"DD6983","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ Yellow SAE Fog","offer_id":67722788700309,"sku":"DD6984","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ White SAE Fog","offer_id":67722788733077,"sku":"DD6985","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ Yellow SAE Fog","offer_id":67722788765845,"sku":"DD6986","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Dual Color \/ White\/Yellow SAE Fog\/Wide","offer_id":67722788798613,"sku":"DD8933","price":367.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/ss3fog-2920_31869.jpg?v=1792100093"},{"product_id":"ss3-led-fog-light-kit-for-2015-2023-subaru-impreza-w-eyesight-package","title":"SS3 LED Fog Light Kit for 2015-2023 Subaru Impreza (w\/ Eyesight Package)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for Subaru Impreza fog lamps\u003c\/li\u003e\n\u003cli\u003eSAE-compliant road-legal output\u003c\/li\u003e\n\u003cli\u003eIncludes round bezel, for factory-style appearance\u003c\/li\u003e\n\u003cli\u003ePlug and play, no modification needed\u003c\/li\u003e\n\u003cli\u003eAdvanced TIR optics provide high efficiency and focus\u003c\/li\u003e\n\u003cli\u003eDurable powdercoated aluminum die-cast\u003c\/li\u003e\n\u003cli\u003eEngineered and Assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOverview. \u003c\/strong\u003eUpgrade the fog lights on your Subaru Impreza with our SS3 Fog Light Bracket Kit! Featuring higher output intensity than any other 3” light on the market, these LED pods have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a durable package. With the included round bezel, the SS3 Fog Kit has a clean, factory-style appearance, only much brighter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug and Play. \u003c\/strong\u003eThanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed on your Subaru Impreza in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place! Wire adapters are included to connect the lights to your factory bulb sockets - no additional wiring needed!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SS3 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SS3 serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the SS3 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Compliant. \u003c\/strong\u003eAll Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it’s great for general illumination as well. Rather than a traditional \"spot\" pattern, the Stage Series Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"FineLine Optic\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog \u003c\/strong\u003e uses our distinctive FineLine optic design, and provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle. Choose cool white, selective yellow, or Dual-Color output to match your needs and the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_C1_Beam_Patterns_-_SAE_Fog_Standard_Description_B_1.jpg\" alt=\"SS3 Beam Patterns\" width=\"785\" height=\"272\"\u003e\u003c\/p\u003e\n\u003cp\u003eWhen installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving\/Auxiliary High Beam Light, and the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eThe Stage Series 3\" LED Pod features a distinctive backlight, in a brilliant amber color. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMultiple Power Levels. \u003c\/strong\u003eStage Series LED pods are available in several power levels to suit your needs. Sport provides dependable performance and is a great entry-level upgrade. Dual-Color delivers output between Sport and Pro, with selectable white and yellow SAE fog output in a single lamp. Pro steps up the intensity for greater visibility, while Max delivers the highest output available for those seeking maximum performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS3_LED_Pod_-_Comparsion_Images_Map.jpg\" width=\"641\" height=\"171\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SS3 Sport \/ White SAE Fog","offer_id":67722804887701,"sku":"DD6980","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ Yellow SAE Fog","offer_id":67722804920469,"sku":"DD6981","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ White SAE Fog","offer_id":67722804953237,"sku":"DD6983","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ Yellow SAE Fog","offer_id":67722804986005,"sku":"DD6984","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ White SAE Fog","offer_id":67722805018773,"sku":"DD6985","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ Yellow SAE Fog","offer_id":67722805051541,"sku":"DD6986","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Dual Color \/ White\/Yellow SAE Fog\/Wide","offer_id":67722805084309,"sku":"DD8933","price":367.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/19_subaru_impreza_ss3_installed_-_subanoob.jpg?v=1792100146"},{"product_id":"ssc1-led-fog-light-kit-for-2008-2011-subaru-impreza","title":"SSC1 LED Fog Light Kit for 2008-2011 Subaru Impreza","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for Subaru Impreza fog lamps\u003c\/li\u003e\n\u003cli\u003eAdvanced TIR optics provide high efficiency and focus\u003c\/li\u003e\n\u003cli\u003eSAE-compliant road-legal output\u003c\/li\u003e\n\u003cli\u003eIncludes one-piece 3D-printed bezel, for factory-style appearance\u003c\/li\u003e\n\u003cli\u003ePlug and play, no modification needed\u003c\/li\u003e\n\u003cli\u003eEngineered and Assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOverview. \u003c\/strong\u003eUpgrade the fog lights on your Subaru Impreza with our SSC1 Fog Light Bracket Kit! Featuring higher output intensity than any other 1” light on the market, these LED pods have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a durable package. With the included one-piece 3D-printed bezel, the SSC1 Fog Kit has a clean, factory-style appearance, only much brighter! This kit includes custom 3D-printed brackets designed and produced by Foxbeam Lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug and Play. \u003c\/strong\u003eThanks to custom 3D-printed brackets, the SSC1 Fog Light Bracket Kit can be installed on your Subaru Impreza in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place! Wire adapters are included to connect the lights to your factory bulb sockets - no additional wiring needed!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SSC1 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SSC1 serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the SSC1 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Compliant. \u003c\/strong\u003eAll Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"FineLine Optic\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog \u003c\/strong\u003e uses our distinctive FineLine optic design, and provides an extremely wide field of view, with high-intensity output over an entire 98-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle. Choose your output color of cool white or yellow, which is often said to help cut through inclement weather.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_C1_Beam_Patterns_-_SAE_Fog_Standard_Description_B_1.jpg\" alt=\"SSC1 Fog Beam Pattern\" width=\"785\" height=\"272\"\u003e\u003c\/p\u003e\n\u003cp\u003eWhen installed as a pair and aimed in accordance with your state's regulations, the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eThe SSC1 LED Pod features a distinctive backlight, in a brilliant amber color. This integrated backlight gives you an additional accent light, along with the main beam. The SSC1's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eAll Stage Series LED pods are available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output, and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"White SAE Fog","offer_id":67722837360789,"sku":"DD8021","price":255.96,"currency_code":"USD","in_stock":true},{"title":"Yellow SAE Fog","offer_id":67722837393557,"sku":"DD8022","price":255.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/ssc1fog-2931_217951.jpg?v=1792100123"},{"product_id":"switchback-turn-signal-leds-for-2009-2011-subaru-impreza-pair","title":"Switchback Turn Signal LEDs for 2009-2011 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWhite running light with bright amber turn function\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 1157 bulb size\u003c\/li\u003e \u003cli\u003eGreater output than factory bulbs\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSwitchback. \u003c\/strong\u003eThese aren't your average turn signal bulbs- they're Switchback! On the Subaru Impreza, they will illuminate in a bright white color, then switch to intense amber when the turn signals are activated. The result is a modern dual-color effect! This is one of the best ways to easily add styling to the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP24 \/ Switchback Cool White and Amber","offer_id":67722907189397,"sku":"DD0012P","price":63.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/frnturn-2931-sb_143678.jpg?v=1792100212"},{"product_id":"tail-light-leds-for-1993-2001-subaru-impreza-pair","title":"Tail Light LEDs for 1993-2001 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza tail light bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 1157 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eInstant Brake. \u003c\/strong\u003eThe factory incandescent tail light bulb on the Subaru Impreza lights up in a glow, which takes a moment to turn on. A modern LED upgrade provides instant response, which can alert other drivers on the road earlier, while also providing a modern LED appearance. This brake light LED is a great upgrade for your Impreza in both style and function.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Tail_Light_-_Comparision_Image.jpg\" alt=\"Tail Light Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eSince the lens on your tail light housing is red, you'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. Red is the correct emitter color for maximum brake light output on your Impreza.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Red","offer_id":67722923933845,"sku":"DD0011P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722923966613,"sku":"DD0014P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67722923999381,"sku":"DD0016P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/tail-2926_107676.jpg?v=1792100252"},{"product_id":"tail-light-leds-for-2002-2016-subaru-impreza-pair","title":"Tail Light LEDs for 2002-2016 Subaru Impreza (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Impreza tail light bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7443 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eInstant Brake. \u003c\/strong\u003eThe factory incandescent tail light bulb on the Subaru Impreza lights up in a glow, which takes a moment to turn on. A modern LED upgrade provides instant response, which can alert other drivers on the road earlier, while also providing a modern LED appearance. This brake light LED is a great upgrade for your Impreza in both style and function.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Tail_Light_-_Comparision_Image.jpg\" alt=\"Tail Light Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eSince the lens on your tail light housing is red, you'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. Red is the correct emitter color for maximum brake light output on your Impreza.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Red","offer_id":67722950115477,"sku":"DD0108P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722950148245,"sku":"DD0112P","price":39.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0108p_7443_hp11_red_pair_6.jpg?v=1792100289"},{"product_id":"trunk-light-led-for-1993-2003-subaru-impreza","title":"Trunk Light LED for 1993-2003 Subaru Impreza","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Impreza trunk light bulb\u003c\/li\u003e \u003cli\u003eIncreased output with LED appearance\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eReplacement LED bulbs are a simple way to improve the look and output of the trunk lights on your Subaru Impreza. Compared to the original incandescent bulbs, they will provide a brighter appearance with modern color. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Impreza.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_Trunk_-_FlexLight_2_1.jpg\" width=\"639\" height=\"170\" alt=\"194 Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColor Options.\u003c\/strong\u003e In addition to vibrant colors of blue, red, amber, and green, our trunk light bulbs are available in a number of white color options. These include a cool white 6000K, pure white 5000K, natural white 4000K, and warm white 3000K. Whether you want a modern cool white appearance, or a traditional warm white color with more output, we have the color to fit your needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze the exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Impreza. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Amber","offer_id":67722984325269,"sku":"DD0018S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Blue","offer_id":67722984358037,"sku":"DD0019S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Warm White (3000K)","offer_id":67722984390805,"sku":"DD0020S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Natural White (4000K)","offer_id":67722984423573,"sku":"DD0021S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Pure White (5000K)","offer_id":67722984456341,"sku":"DD0022S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Red","offer_id":67722984489109,"sku":"DD0023S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67722984521877,"sku":"DD0024S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Amber","offer_id":67722984554645,"sku":"DD0025S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Blue","offer_id":67722984587413,"sku":"DD0026S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67722984620181,"sku":"DD0027S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Natural White (4000K)","offer_id":67722984652949,"sku":"DD0028S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Pure White (5000K)","offer_id":67722984685717,"sku":"DD0029S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Red","offer_id":67722984718485,"sku":"DD0030S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67722984751253,"sku":"DD0031S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Amber","offer_id":67722984784021,"sku":"DD0145S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Blue","offer_id":67722984816789,"sku":"DD0146S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Green","offer_id":67722984849557,"sku":"DD0147S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Warm White (3000K)","offer_id":67722984882325,"sku":"DD0148S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Red","offer_id":67722984915093,"sku":"DD0149S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Cool White (6000K)","offer_id":67722984947861,"sku":"DD0150S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Warm White (3000K)","offer_id":67722984980629,"sku":"DD0192S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Cool White (6000K)","offer_id":67722985013397,"sku":"DD0193S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Red","offer_id":67722985046165,"sku":"DD0194S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Blue","offer_id":67722985078933,"sku":"DD0195S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Amber","offer_id":67722985111701,"sku":"DD0196S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Green","offer_id":67722985144469,"sku":"DD0197S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Green","offer_id":67722985177237,"sku":"DD0203S","price":6.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/tnk-2926_119993.jpg?v=1792100508"}],"url":"https:\/\/www.diodedynamics.com\/collections\/subaru-impreza.oembed","provider":"Diode Dynamics LLC","version":"1.0","type":"link"}