{"title":"Subaru Crosstrek LED Lighting Upgrades","description":null,"products":[{"product_id":"front-turn-signal-leds-for-2016-2017-subaru-crosstrek-pair","title":"Front Turn Signal LEDs for 2016-2017 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Crosstrek illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Crosstrek.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Turn_Signal_-_Comparision_Image.jpg\" alt=\"Front Turn Signal Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer an amber color option, which is correct to SAE\/DOT \"amber\" requirements. Whether you have a clear lens or an amber reflector over the turn signal bulb on your Crosstrek, amber is the correct emitter color for maximum turn signal output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Crosstrek looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Crosstrek, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67693184516245,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67693184549013,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67693184581781,"sku":"DD0114P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/7443_xp80_amber_pair_titled_1_6.jpg?v=1791923447"},{"product_id":"map-light-leds-for-2016-2017-subaru-crosstrek-pair","title":"Map Light LEDs for 2016-2017 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern cool white appearance, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek map light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 31mm Festoon bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eThis replacement LED bulb is a great way to improve the look and function of the map lights on your Subaru Crosstrek. They'll provide a modern, premium appearance compared to the original incandescent bulb. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Crosstrek.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_Map_-_SMF2_vs_HP6.jpg\" width=\"639\" height=\"170\" alt=\"Festoon Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SMF2 \/ Blue","offer_id":67693194182805,"sku":"DD0067P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Green","offer_id":67693194215573,"sku":"DD0068P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Warm White (3000K)","offer_id":67693194248341,"sku":"DD0069P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Red","offer_id":67693194281109,"sku":"DD0070P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Cool White (6000K)","offer_id":67693194313877,"sku":"DD0071P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Amber","offer_id":67693194346645,"sku":"DD0145P","price":23.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Blue","offer_id":67693194379413,"sku":"DD0146P","price":23.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Green","offer_id":67693194412181,"sku":"DD0147P","price":23.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Warm White (3000K)","offer_id":67693194444949,"sku":"DD0148P","price":23.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Red","offer_id":67693194477717,"sku":"DD0149P","price":23.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Cool White (6000K)","offer_id":67693194510485,"sku":"DD0150P","price":23.96,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Amber","offer_id":67693194543253,"sku":"DD0189P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Amber","offer_id":67693194576021,"sku":"DD0295P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Blue","offer_id":67693194608789,"sku":"DD0296P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Cool White (6000K)","offer_id":67693194641557,"sku":"DD0299P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Red","offer_id":67693194674325,"sku":"DD0301P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Warm White (3000K)","offer_id":67693194707093,"sku":"DD0351P","price":19.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/31mm_hp6_cool_pair_map_titled_1.jpg?v=1791923539"},{"product_id":"rear-turn-signal-leds-for-2016-2017-subaru-crosstrek-pair","title":"Rear Turn Signal LEDs for 2016-2017 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Crosstrek illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Crosstrek.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Rear_Turn_Signal_-_Comparision_Image.jpg\" alt=\"Amber Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we offer both a red and amber option, which meet SAE\/DOT \"amber\" and \"red\" requirements. If you have a clear lens or an amber reflector over the turn signal bulb on your Crosstrek, amber is the correct emitter color for maximum turn signal output. If your vehicle has a red lens over the rear turn signal, then red is the correct emitter for you.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Crosstrek looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Crosstrek, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67693313687701,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67693313720469,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0114p_7443_xp80_amber_pair_2.jpg?v=1791923673"},{"product_id":"sidemarker-leds-for-2016-2023-subaru-crosstrek-pair","title":"Sidemarker LEDs for 2016-2023 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED illumination\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek sidemarker light bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Upgrade. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the function and longevity of the sidemarkers on your Subaru Crosstrek. They'll provide modern illumination with long lifespan compared to the original incandescent bulbs. The installation is straightforward, with just a bulb swap - making it a simple upgrade for the Crosstrek's lighting setup.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChoose Your Color. \u003c\/strong\u003eYou'll see that there are multiple color options for these bulbs. Please select what you need for your setup! If you have amber lenses in the front, select amber bulbs in order to maximize output. If you have clear front reflectors, like found in many aftermarket headlamps, you can use white or amber bulbs. For the rear, you'll always want to select red bulbs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFront and Rear. \u003c\/strong\u003eThis listing includes one pair of bulbs. If you need both front and rear bulbs, please add one of each to your cart in each respective color. You'll always need red in the rear, and amber or white bulbs are for the front of the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Amber","offer_id":67693328629909,"sku":"DD0018P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Warm White (3000K)","offer_id":67693328662677,"sku":"DD0020P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Red","offer_id":67693328695445,"sku":"DD0023P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67693328728213,"sku":"DD0024P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Amber","offer_id":67693328760981,"sku":"DD0025P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67693328793749,"sku":"DD0027P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Red","offer_id":67693328826517,"sku":"DD0030P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67693328859285,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Amber","offer_id":67693328892053,"sku":"DD0032P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Warm White (3000K)","offer_id":67693328924821,"sku":"DD0035P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Red","offer_id":67693328957589,"sku":"DD0036P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Cool White (6000K)","offer_id":67693328990357,"sku":"DD0037P","price":7.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0030p_194_hp5_red_pair_sidemarker_titled.jpg?v=1791923741"},{"product_id":"ss3-led-fog-light-kit-for-2016-2017-subaru-crosstrek","title":"SS3 LED Fog Light Kit for 2016-2017 Subaru Crosstrek","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for Subaru Crosstrek fog lamps\u003c\/li\u003e\n\u003cli\u003eSAE-compliant road-legal output\u003c\/li\u003e\n\u003cli\u003eIncludes round bezel, for factory-style appearance\u003c\/li\u003e\n\u003cli\u003ePlug and play, no modification needed\u003c\/li\u003e\n\u003cli\u003eAdvanced TIR optics provide high efficiency and focus\u003c\/li\u003e\n\u003cli\u003eDurable powdercoated aluminum die-cast\u003c\/li\u003e\n\u003cli\u003eEngineered and Assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOverview. \u003c\/strong\u003eUpgrade the fog lights on your Subaru Crosstrek with our SS3 Fog Light Bracket Kit! Featuring higher output intensity than any other 3” light on the market, these LED pods have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a durable package. With the included round bezel, the SS3 Fog Kit has a clean, factory-style appearance, only much brighter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug and Play. \u003c\/strong\u003eThanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed on your Subaru Crosstrek in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place! Wire adapters are included to connect the lights to your factory bulb sockets - no additional wiring needed!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SS3 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SS3 serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the SS3 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Compliant. \u003c\/strong\u003eAll Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it’s great for general illumination as well. Rather than a traditional \"spot\" pattern, the Stage Series Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"FineLine Optic\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog \u003c\/strong\u003e uses our distinctive FineLine optic design, and provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle. Choose cool white, selective yellow, or Dual-Color output to match your needs and the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_C1_Beam_Patterns_-_SAE_Fog_Standard_Description_B_1.jpg\" alt=\"SS3 Beam Patterns\" width=\"785\" height=\"272\"\u003e\u003c\/p\u003e\n\u003cp\u003eWhen installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving\/Auxiliary High Beam Light, and the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eThe Stage Series 3\" LED Pod features a distinctive backlight, in a brilliant amber color. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMultiple Power Levels. \u003c\/strong\u003eStage Series LED pods are available in several power levels to suit your needs. Sport provides dependable performance and is a great entry-level upgrade. Dual-Color delivers output between Sport and Pro, with selectable white and yellow SAE fog output in a single lamp. Pro steps up the intensity for greater visibility, while Max delivers the highest output available for those seeking maximum performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS3_LED_Pod_-_Comparsion_Images_Map.jpg\" width=\"641\" height=\"171\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SS3 Sport \/ White SAE Fog","offer_id":67711528403093,"sku":"DD6980","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ Yellow SAE Fog","offer_id":67711528435861,"sku":"DD6981","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ White SAE Fog","offer_id":67711528468629,"sku":"DD6983","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ Yellow SAE Fog","offer_id":67711528501397,"sku":"DD6984","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ White SAE Fog","offer_id":67711528534165,"sku":"DD6985","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ Yellow SAE Fog","offer_id":67711528566933,"sku":"DD6986","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Dual Color \/ White\/Yellow SAE Fog\/Wide","offer_id":67711528599701,"sku":"DD8933","price":367.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/20191207-subaru_crosstrek_2019_close_up_studio_ss3_on_no-watermark.jpg?v=1792012405"},{"product_id":"ss3-led-fog-light-kit-for-2018-2026-subaru-crosstrek","title":"SS3 LED Fog Light Kit for 2018-2026 Subaru Crosstrek","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for Subaru Crosstrek fog lamps\u003c\/li\u003e\n\u003cli\u003eSAE-compliant road-legal output\u003c\/li\u003e\n\u003cli\u003eIncludes custom bracket with bezel, for factory-style appearance\u003c\/li\u003e\n\u003cli\u003ePlug and play, no modification needed\u003c\/li\u003e\n\u003cli\u003eAdvanced TIR optics provide high efficiency and focus\u003c\/li\u003e\n\u003cli\u003eDurable powdercoated aluminum die-cast\u003c\/li\u003e\n\u003cli\u003eEngineered and Assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOverview. \u003c\/strong\u003eUpgrade the fog lights on your Subaru Crosstrek with our SS3 Fog Light Bracket Kit! Featuring higher output intensity than any other 3” light on the market, these LED pods have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a durable package. With the included custom bracket with bezel, the SS3 Fog Kit has a clean, factory-style appearance, only much brighter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug and Play. \u003c\/strong\u003eThanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed on your Subaru Crosstrek in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place! Wire adapters are included to connect the lights to your factory bulb sockets - no additional wiring needed!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SS3 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SS3 serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the SS3 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Compliant. \u003c\/strong\u003eAll Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it’s great for general illumination as well. Rather than a traditional \"spot\" pattern, the Stage Series Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"FineLine Optic\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog \u003c\/strong\u003e uses our distinctive FineLine optic design, and provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle. Choose cool white, selective yellow, or Dual-Color output to match your needs and the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_C1_Beam_Patterns_-_SAE_Fog_Standard_Description_B_1.jpg\" alt=\"SS3 Beam Patterns\" width=\"785\" height=\"272\"\u003e\u003c\/p\u003e\n\u003cp\u003eWhen installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving\/Auxiliary High Beam Light, and the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eThe Stage Series 3\" LED Pod features a distinctive backlight, in a brilliant amber color. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMultiple Power Levels. \u003c\/strong\u003eStage Series LED pods are available in several power levels to suit your needs. Sport provides dependable performance and is a great entry-level upgrade. Dual-Color delivers output between Sport and Pro, with selectable white and yellow SAE fog output in a single lamp. Pro steps up the intensity for greater visibility, while Max delivers the highest output available for those seeking maximum performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS3_LED_Pod_-_Comparsion_Images_Map.jpg\" width=\"641\" height=\"171\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SS3 Sport \/ White SAE Fog","offer_id":67711529582741,"sku":"DD6988","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ Yellow SAE Fog","offer_id":67711529615509,"sku":"DD6989","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ White SAE Fog","offer_id":67711529648277,"sku":"DD6991","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ Yellow SAE Fog","offer_id":67711529681045,"sku":"DD6992","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ White SAE Fog","offer_id":67711529713813,"sku":"DD6993","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ Yellow SAE Fog","offer_id":67711529746581,"sku":"DD6994","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Dual Color \/ White\/Yellow SAE Fog\/Wide","offer_id":67711529779349,"sku":"DD8934","price":367.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/brian_hood___viscous_oreo_2020_subaru_ascent_3_1.jpg?v=1792012411"},{"product_id":"c2-2-0-white-pro-led-pod-pair","title":"C2 2.0 White Pro LED Pod (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-compact design for tight mounting spots\u003c\/li\u003e\n\u003cli\u003ePatented TIR optics for maximum output\u003c\/li\u003e\n\u003cli\u003eUp to 95% more power than C2 1.0\u003c\/li\u003e\n\u003cli\u003eAvailable in Sport, Pro, and new 3900-lumen Max power levels\u003c\/li\u003e\n\u003cli\u003eCustomizable mounting to dial in your setup\u003c\/li\u003e\n\u003cli\u003eLink multiple pods with CrossLink technology\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eMade in USA with Global Materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eIntroducing the next generation of compact LED lighting, the Stage Series C2 2.0 LED Pod! Building on the popularity of the original C2 LED Pod, the newly redesigned C2 2.0 packs even more power, light output, and versatility into the same 2-inch footprint. With its compact design, the C2 2.0 is a go-to for tight mounting spots–roof racks, roll bars, bumpers, A-pillars, you name it. Despite its small size, the new Max option is the most powerful two-inch pod on the market at 3900 raw lumens!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRe-Engineered From the Inside Out.\u003c\/strong\u003e The C2 2.0 may look familiar, but under the hood, everything has changed. A new copper-core circuit board is bonded directly to the LED chips, dramatically improving thermal efficiency and overall performance. The powdercoated aluminum housing has also been redesigned to dissipate more heat than ever before, resulting in higher power and light output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose Your Power Level.\u003c\/strong\u003e The C2 2.0 LED pod is now available at three different power levels. All options use high-intensity, automotive-grade LED emitters, and TIR optics for unmatched focus and overall output. The Sport model offers the best bang for your buck with high-intensity LEDs, while the Pro model takes things further with a noticeable boost in total power.\u003c\/p\u003e\n\u003cp\u003eThe new Max power level uses the same Osram HX Boost LEDs found in our highest-output SS3 LED pods, delivering 3900 raw lumens. That’s serious brightness from a pod that still fits in the palm of your hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused Performance.\u003c\/strong\u003e Our patented TIR (Total Internal Reflection) optics in the C2 2.0 have been re-engineered for up to 120% more intensity and more usable light output compared to the C2 1.0. The TIR optics harness all of the light from the LED and direct it precisely where you need it, cutting glare and boosting efficiency. Each beam pattern has been fine-tuned for real-world conditions to perform even better than before.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eCombo\/Driving\u003c\/strong\u003e pattern has been completely redesigned to deliver a better blend of width and distance compared to the legacy model. The C2 2.0 Combo\/Driving optic uses advanced pillow optics to shine light downrange in a rectangular pattern of 55x20 degrees. The Combo\/Driving pattern is great for all-around use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it's also great for general illumination, providing extra width. The new C2 2.0 Driving pattern measures 20x12 degrees, providing the perfect width to fully illuminate the road ahead at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"SS5 Backlight Functionality\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog\/Wide \u003c\/strong\u003e uses our distinctive FineLine optic, which provides an exceptionally wide pattern. The SAE Fog\/Wide optic shines with a 90x10 degree pattern to fully illuminate the area directly in front of your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood\u003c\/strong\u003e pattern provides a uniform, even illumination with a broad 70x45 degree spread of light. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses advanced pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout. It is perfect to use as a backup light, for lighting up anything at low speeds, or for trailers, campsites, and work areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpot\u003c\/strong\u003e shines light directly from the unmodified TIR optic in a tight, long-distance beam, resulting in a highly focused 8-degree beam of light. The Spot pattern is perfect for directing light far into the distance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot just off road.\u003c\/strong\u003e When installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving\/Auxiliary High Beam Light, and the Fog\/Wide pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality.\u003c\/strong\u003e These C2 2.0 LED Pods include a distinctive backlight feature, available in your choice of red or amber. The backlight fully illuminates the TIR optic, providing a unique and modern look. The red backlight is ideal for those looking to match OEM taillights or boost rear visibility, while the amber backlight is a great option for forward-facing applications to match OEM markers or add extra visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustomizable Mounting.\u003c\/strong\u003e The C2 2.0 LED pod features three mounting points to adjust the pod’s height. The revised mounting bracket also allows for even more adjustment to the angle of the pod for a more dialed-in setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwappable Optics and Colors.\u003c\/strong\u003e Just like before, the lenses on the C2 are swappable. But here’s what makes the C2 2.0 even better–they now use the same high-output Cool White LED chips for both white and yellow LED pods. This means changing your optic and color is just a simple lens swap away. No need to worry about color variation when switching from yellow to white! \u003ca href=\"https:\/\/www.diodedynamics.com\/products\/led-off-road-lights\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eClick here\u003c\/span\u003e\u003c\/a\u003e to view our full lineup of replacement lenses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSnap-On Covers.\u003c\/strong\u003e Protect your investment or take the customization even further with our expanded lineup of \u003ca href=\"https:\/\/www.diodedynamics.com\/products\/led-off-road-lights\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eSnap-On Lens Covers\u003c\/span\u003e\u003c\/a\u003e! An all-new amber cover joins our existing clear, yellow, smoked, and black options. No tools required, just snap on and go.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCrossLink.\u003c\/strong\u003e The C2 2.0 LED Pod is now available with our patent-pending CrossLink technology! Our CrossLink mounting system allows you to seamlessly link together multiple pods to create your own custom lightbar configuration. \u003ca href=\"https:\/\/www.diodedynamics.com\/products\/led-off-road-lights\/off-road-accessories-wiring-lens\/brackets-mounts\/ssc2-led-pod.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eClick here\u003c\/span\u003e\u003c\/a\u003e to view our C2 2.0 CrossLink mounting solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States using globally sourced materials, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SAE\/DOT Driving \/ Amber","offer_id":67711535480981,"sku":"DD8100P","price":271.96,"currency_code":"USD","in_stock":true},{"title":"SAE Fog\/Wide \/ Amber","offer_id":67711535513749,"sku":"DD8102P","price":271.96,"currency_code":"USD","in_stock":true},{"title":"Combo\/Driving \/ Amber","offer_id":67711535546517,"sku":"DD8104P","price":271.96,"currency_code":"USD","in_stock":true},{"title":"Combo\/Driving \/ Red","offer_id":67711535579285,"sku":"DD8105P","price":271.96,"currency_code":"USD","in_stock":true},{"title":"Flood \/ Amber","offer_id":67711535612053,"sku":"DD8107P","price":271.96,"currency_code":"USD","in_stock":true},{"title":"Flood \/ Red","offer_id":67711535644821,"sku":"DD8108P","price":271.96,"currency_code":"USD","in_stock":true},{"title":"Spot \/ Amber","offer_id":67711535677589,"sku":"DD8110P","price":271.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd8105p_c2_gen2_pro_white_combo_standard_rbl_pair_built_-_titled.jpg?v=1792012417"},{"product_id":"2016-2017-subaru-crosstrek-4th-brake-light-kit","title":"2016-2017 Subaru Crosstrek 4th Brake Light Kit","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSimple installation with plug-and-play wiring harness\u003c\/li\u003e\n\u003cli\u003eAdds a powerful reverse light, 4th brake light, and additional running light\u003c\/li\u003e\n\u003cli\u003eIncludes optional F1-style flash pattern\u003c\/li\u003e\n\u003cli\u003eOEM-grade construction with molded bracket and all-aluminum housing\u003c\/li\u003e\n\u003cli\u003eCustom-engineered TIR optics for industry-leading output\u003c\/li\u003e\n\u003cli\u003eMade in USA with Global Materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eLooking to give the rear bumper on your Subaru Crosstrek a JDM appearance without sacrificing performance or quality? Look no further. Introducing our Stage Series C2R 4th Brake Light Kit! This kit replaces the blank trim piece found on many USDM Subaru rear bumpers with our high-performance C2R LED Pod, housed in a custom-molded bracket for a clean, OEM fit and finish. The C2R functions as a rear fog light, adding a 4th brake light with an optional F1-style flash pattern, a powerful reverse light, and an additional red running light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eF1-Style 4th Brake Light. \u003c\/strong\u003eThe C2R features a high-power red function to serve as a powerful 4th brake light, along with the low-power running light. The high-power red functionality activates anytime you apply your brakes, adding a 4th brake light to your Crosstrek.\u003c\/p\u003e\n\u003cp\u003eThe C2R also features optional F1-style SafetyStrobe brake light, which can be activated in 15-second intervals. By default, the C2R will flash three times when the brake lights are initially applied, giving you a unique look on the road. The F1-style SafetyStrobe feature can be easily disabled if desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eFactory reverse lights often fall short when it comes to usable output. Powered by automotive-grade, high-intensity LEDs and our custom-engineered TIR optics, the C2R delivers a dramatic increase in brightness, providing significantly more light when backing up at night.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Running Light. \u003c\/strong\u003eThe C2R LED Pod features a distinctive red backlight that functions as an additional running light. Unlike small indicator LEDs found in other products, the backlight fully illuminates the TIR optic for a unique, modern appearance on the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM Fit and Finish. \u003c\/strong\u003eEach kit includes a custom-molded bracket designed specifically for the Crosstrek, allowing the C2R to mount flush in the rear bumper in the same location as JDM-model rear fog lights. The bracket itself features a grained texture that matches the surrounding trim pieces for a clean, OEM-style appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused. \u003c\/strong\u003eTraditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Our patented TIR (Total Internal Reflection) optic in the C2R collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the C2R serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the C2R is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output. \u003c\/strong\u003eAll Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood \u003c\/strong\u003e pattern provides a uniform, even illumination with a broad 70x45 degree spread of light. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses advanced pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout, making it perfect for use as a backup light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug-and-Play. \u003c\/strong\u003eThis kit is designed for simple, plug-and-play installation on your Crosstrek. The included wiring harness connects directly in-line with your tail light wiring with no splicing or modification needed. From there, simply route the wiring to the bumper and use the custom-molded bracket to mount the C2R securely in place with the included hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States using globally sourced materials, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"C2R + Brake","offer_id":67721586737301,"sku":"DD8068","price":175.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2017_subaru_crosstrek_c2r_4th_brake_light_kit_detailed_high_power_red.jpg?v=1792097591"},{"product_id":"2016-2017-subaru-crosstrek-c-light-switchback-led-halos","title":"2016-2017 Subaru Crosstrek C-Light Switchback LED Halos","description":"\u003csection\u003e\u003ch3\u003e2016-2017 Subaru Crosstrek Switchback LED Halos\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eComputer-designed LED halos, for perfect fitment in Crosstrek headlamps\u003c\/li\u003e \u003cli\u003eHuge increase in brightness, with pure white and brilliant amber output\u003c\/li\u003e \u003cli\u003eOptional DRL harness allows the LEDs to function just like factory DRL \u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eTime for an upgrade! \u003c\/strong\u003e These C-Light LED modules are circuit boards that fit right behind the factory diffusing reflector, illuminating in an \u003cstrong\u003eextremely bright white\u003c\/strong\u003e, as well as a \u003cstrong\u003ebrilliant amber\u003c\/strong\u003e. Don't be fooled by other options on the market: these LEDs have been designed from the ground-up for this application, and manufactured in St. Louis, Missouri, to be absolutely the brightest lights physically possible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHigh output, clean appearance. \u003c\/strong\u003eThe custom-designed LED modules replace the factory bulb or single LED, illuminating with a much higher intensity. With our proprietary high-density \"HDLED\" technology, these modules are populated with \u003cstrong\u003eover 500 LED chips\u003c\/strong\u003e, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When it's off, the diffusing gel hides the chips, resulting in a \u003cstrong\u003eclean, OEM appearance\u003c\/strong\u003e.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePure white color. Assembled \u003c\/strong\u003e\u003cstrong\u003ein USA\u003c\/strong\u003e, the modules light in a pure 6000K white color, not a cool blue like cheaper products on the market. And because they use modern high-power amber chips, rather than traditional LEDs, the amber is even brighter than the white!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstant-current power. \u003c\/strong\u003eTo power the modules efficiently, your order includes two custom-designed drivers, which feature transient voltage suppression, reverse protection, and a switching driver for extremely high reliability over time. And here's what really makes this product shine over the competition: with an \u003cstrong\u003eembedded microcontroller\u003c\/strong\u003e, the drivers utilize \u003cstrong\u003emulti-stage PWM dimming\u003c\/strong\u003e, to allow for a half-brightness white, for use at night (parking lights), as well as a full-power white, for use as DRL during the day. Finally, the amber is run at even higher power, making the turn signal easily visible in broad daylight!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWire it up. \u003c\/strong\u003eWiring instructions are included with your order. You will need to use the included T-tap connectors to connect the drivers to ground, parking signal, DRL, and turn signal on each side. Professional installation is recommended for this product, as the headlights must be opened.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Switchback Cool White and Amber","offer_id":67721588965525,"sku":"DD2221","price":143.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/15_subaru_crosstrek_comapre_close__1.jpg?v=1792097594"},{"product_id":"backup-leds-for-2016-2017-subaru-crosstrek-pair","title":"Backup LEDs for 2016-2017 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 921 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Subaru Crosstrek. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Crosstrek's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Backup_Light_-_Comparision_Image_XPR_2.jpg\" width=\"639\" height=\"170\" alt=\"XPR Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP5 \/ Cool White (6000K)","offer_id":67721654141077,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP36 \/ Cool White (6000K)","offer_id":67721654173845,"sku":"DD0143P","price":47.96,"currency_code":"USD","in_stock":true},{"title":"921 XPR White \/ Cool White (6000K)","offer_id":67721654206613,"sku":"DD0394P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/921_xpr_pair_-_backup_45.jpg?v=1792097795"},{"product_id":"backup-leds-for-2018-2023-subaru-crosstrek-pair","title":"Backup LEDs for 2018-2023 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Subaru Crosstrek. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Crosstrek's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Backup_Light_-_7443.jpg\" width=\"750\" height=\"150\" alt=\"7443 XPR Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Cool White (6000K)","offer_id":67721657057429,"sku":"DD0109P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Cool White (6000K)","offer_id":67721657090197,"sku":"DD0113P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"7443 XPR White \/ Cool White (6000K)","offer_id":67721657122965,"sku":"DD0386P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/bckup-2998_86008.jpg?v=1792097801"},{"product_id":"backup-leds-for-2024-2026-subaru-crosstrek-pair","title":"Backup LEDs for 2024-2026 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 921 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Subaru Crosstrek. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Crosstrek's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Backup_Light_-_Comparision_Image_XPR_2.jpg\" width=\"639\" height=\"170\" alt=\"XPR Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP5 \/ Cool White (6000K)","offer_id":67721661186197,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP36 \/ Cool White (6000K)","offer_id":67721661218965,"sku":"DD0143P","price":47.96,"currency_code":"USD","in_stock":true},{"title":"921 XPR White \/ Cool White (6000K)","offer_id":67721661251733,"sku":"DD0394P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/921_xpr_pair_-_backup_45_1.jpg?v=1792097810"},{"product_id":"d-switch-hub-mounting-kit-for-2016-2017-subaru-crosstrek","title":"D-Switch Hub Mounting Kit for 2016-2017 Subaru Crosstrek","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBolt-on installation in the Subaru Crosstrek engine bay.\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting points  -  no cutting, drilling, or modification required.\u003c\/li\u003e\n\u003cli\u003eDesigned for easy access to your D-Switch Hub whenever you need it.\u003c\/li\u003e\n\u003cli\u003eOptimal placement does not interfere with your fuse box or battery.\u003c\/li\u003e\n\u003cli\u003ePowdercoated 10-gauge stainless steel construction for long-lasting durability.\u003c\/li\u003e\n\u003cli\u003eMade in USA using Global Materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnsure of where to mount your D-Switch Hub? Check this out! The D-Switch Hub Mount Kit for the Subaru Crosstrek eliminates the guesswork and provides a simple, bolt-on mounting solution. This kit bolts directly to OEM mounting points in the engine bay, without interfering with the fuse box or battery, and allows for easy access to the D-Switch Hub.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUltimate Control. \u003c\/strong\u003eThe D-Switch is an advanced 8-channel switch panel that gives you full, customized control over any 12V accessory that you want to wire up. Our engineers have tailored it specifically to be the most functional and effective controller when it comes to your lighting setup.\u003c\/p\u003e\n\u003cp\u003eThe D-Switch features four 30A outputs and four 15A outputs, putting it solidly into the \"serious\" category for total power delivery, but it’s packed with all kinds of other features to customize your setup!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDedicated Backlight Channel. \u003c\/strong\u003eWhile there are many 8-button controllers on the market, the D-Switch stands apart with a 9th button dedicated to the backlight bus bar. The backlight bus provides eight extra outputs for your accent lights, allowing you to connect all of your backlit accessories without using up any of your main outputs. With just the press of a button, you can now activate all of your backlights at once! This is a game-changer for any rig with multiple lights installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Channel Assignment. \u003c\/strong\u003eThe Diode Dynamics D-Switch is designed to give you complete control over your vehicle’s setup with eight customizable output channels. Unlike traditional automotive switch panels that are one-to-one, meaning Channel 1 is always tied to Button 1, the D-Switch allows you to group and configure multiple output channels per button, allowing you to control multiple outputs with a single button.\u003c\/p\u003e\n\u003cp\u003eYou can also power a single output with the different strobing patterns that are included. For example, you can program one button to strobe a light and another to run that same light at full power. Whether you're running Diode Dynamics off-road lighting or any other 12V accessories, the D-Switch allows you to customize each button to do exactly what you need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast, Responsive Bluetooth App. \u003c\/strong\u003eTo activate and use the D-Switch, you can use the included controller, or control it using your phone through the Bluetooth App. That’s where you’ll configure and customize your setup, including button names, images, colors, and channel assignments. Say goodbye to switch panel apps that lag, freeze, or don’t connect. The D-Switch Bluetooth app for iOS and Android delivers instant response and easy programming with no loading screens or connection delays for a seamless and fast experience, every time. The app allows you to pair up to four individual D-Switch units for ultimate control over your entire setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApple CarPlay and Android Auto Compatibility. \u003c\/strong\u003eThe D-Switch now gives you even more ways to control your setup with compatibility for Apple CarPlay and Android Auto. Once your D-Switch is configured through the Bluetooth App, you can access your custom button layout directly from your vehicle’s infotainment screen for convenient in-dash control of all nine channels. Custom button names, images, unit names, and button colors carry over from the app, giving you a familiar control experience whether you’re using the physical controller, your phone, or your vehicle’s display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM Signal Integration. \u003c\/strong\u003eThe D-Switch includes four trigger wires, along with a dedicated Ignition wire for added flexibility. This allows you to control your whole setup using vehicle signals, for a completely integrated experience.\u003c\/p\u003e\n\u003cp\u003eThe ignition wire can be wired into an OEM ignition source and will activate the D-Switch when the ignition is turned on. It will also shut things down when the ignition is turned off. No need to manually turn your panel off! If you want to use any outputs without the ignition turned on, no worries - you can still turn the controller on manually at any time.\u003c\/p\u003e\n\u003cp\u003eThe three trigger wires provide seamless integration with any of your vehicle’s 12V factory signals, such as high beams, fog lights, or reverse lights. This allows you to activate your outputs automatically–no buttons or switches. With some simple programming, your entire setup can operate like it’s fully integrated on your vehicle.\u003c\/p\u003e\n\u003cp\u003eLastly, the Night Mode wire can be used to activate certain outputs, such as dimming outputs, or adjusting settings for low-light conditions. This trigger also adjusts the brightness of the controller’s backlighting automatically when driving at night.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolid-State, Durable Design. \u003c\/strong\u003eBuilt for extreme durability, the D-Switch features a solid-state design with no mechanical relays to wear out, or physical fuses to replace. The hub is encapsulated with an aluminum heatsink, ensuring superior heat dissipation. Both the hub and controller feature an IP67 weather resistance rating for all electronics, excluding wiring terminals, ensuring long-term reliability and performance. The mount included in the kit is constructed out of 10-gauge stainless steel and finished in a durable powdercoat. With a 3-year limited warranty, this kit is built to withstand whatever you throw at it, whether you're off-roading or on the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we directly manufacture and engineer an increasing number of products ourselves in the United States using globally sourced materials, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Bracket-Only","offer_id":67721667739797,"sku":"DD8576","price":47.96,"currency_code":"USD","in_stock":true},{"title":"D-Switch w\/ Bracket","offer_id":67721667772565,"sku":"DD8840","price":527.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2025_toyota_4runner_universal_d-switch_hub_mounting_kit_installed_-6_5ff9cc96-365f-4032-bfa5-412cb80cd9cb.jpg?v=1792097840"},{"product_id":"d-switch-hub-mounting-kit-for-2018-2026-subaru-crosstrek","title":"D-Switch Hub Mounting Kit for 2018-2026 Subaru Crosstrek","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBolt-on installation in the Subaru Crosstrek engine bay.\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting points  -  no cutting, drilling, or modification required.\u003c\/li\u003e\n\u003cli\u003eDesigned for easy access to your D-Switch Hub whenever you need it.\u003c\/li\u003e\n\u003cli\u003eOptimal placement does not interfere with your fuse box or battery.\u003c\/li\u003e\n\u003cli\u003ePowdercoated 10-gauge stainless steel construction for long-lasting durability.\u003c\/li\u003e\n\u003cli\u003eMade in USA using Global Materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnsure of where to mount your D-Switch Hub? Check this out! The D-Switch Hub Mount Kit for the Subaru Crosstrek eliminates the guesswork and provides a simple, bolt-on mounting solution. This kit bolts directly to OEM mounting points in the engine bay, without interfering with the fuse box or battery, and allows for easy access to the D-Switch Hub.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUltimate Control. \u003c\/strong\u003eThe D-Switch is an advanced 8-channel switch panel that gives you full, customized control over any 12V accessory that you want to wire up. Our engineers have tailored it specifically to be the most functional and effective controller when it comes to your lighting setup.\u003c\/p\u003e\n\u003cp\u003eThe D-Switch features four 30A outputs and four 15A outputs, putting it solidly into the \"serious\" category for total power delivery, but it’s packed with all kinds of other features to customize your setup!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDedicated Backlight Channel. \u003c\/strong\u003eWhile there are many 8-button controllers on the market, the D-Switch stands apart with a 9th button dedicated to the backlight bus bar. The backlight bus provides eight extra outputs for your accent lights, allowing you to connect all of your backlit accessories without using up any of your main outputs. With just the press of a button, you can now activate all of your backlights at once! This is a game-changer for any rig with multiple lights installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Channel Assignment. \u003c\/strong\u003eThe Diode Dynamics D-Switch is designed to give you complete control over your vehicle’s setup with eight customizable output channels. Unlike traditional automotive switch panels that are one-to-one, meaning Channel 1 is always tied to Button 1, the D-Switch allows you to group and configure multiple output channels per button, allowing you to control multiple outputs with a single button.\u003c\/p\u003e\n\u003cp\u003eYou can also power a single output with the different strobing patterns that are included. For example, you can program one button to strobe a light and another to run that same light at full power. Whether you're running Diode Dynamics off-road lighting or any other 12V accessories, the D-Switch allows you to customize each button to do exactly what you need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast, Responsive Bluetooth App. \u003c\/strong\u003eTo activate and use the D-Switch, you can use the included controller, or control it using your phone through the Bluetooth App. That’s where you’ll configure and customize your setup, including button names, images, colors, and channel assignments. Say goodbye to switch panel apps that lag, freeze, or don’t connect. The D-Switch Bluetooth app for iOS and Android delivers instant response and easy programming with no loading screens or connection delays for a seamless and fast experience, every time. The app allows you to pair up to four individual D-Switch units for ultimate control over your entire setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApple CarPlay and Android Auto Compatibility. \u003c\/strong\u003eThe D-Switch now gives you even more ways to control your setup with compatibility for Apple CarPlay and Android Auto. Once your D-Switch is configured through the Bluetooth App, you can access your custom button layout directly from your vehicle’s infotainment screen for convenient in-dash control of all nine channels. Custom button names, images, unit names, and button colors carry over from the app, giving you a familiar control experience whether you’re using the physical controller, your phone, or your vehicle’s display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM Signal Integration. \u003c\/strong\u003eThe D-Switch includes four trigger wires, along with a dedicated Ignition wire for added flexibility. This allows you to control your whole setup using vehicle signals, for a completely integrated experience.\u003c\/p\u003e\n\u003cp\u003eThe ignition wire can be wired into an OEM ignition source and will activate the D-Switch when the ignition is turned on. It will also shut things down when the ignition is turned off. No need to manually turn your panel off! If you want to use any outputs without the ignition turned on, no worries - you can still turn the controller on manually at any time.\u003c\/p\u003e\n\u003cp\u003eThe three trigger wires provide seamless integration with any of your vehicle’s 12V factory signals, such as high beams, fog lights, or reverse lights. This allows you to activate your outputs automatically–no buttons or switches. With some simple programming, your entire setup can operate like it’s fully integrated on your vehicle.\u003c\/p\u003e\n\u003cp\u003eLastly, the Night Mode wire can be used to activate certain outputs, such as dimming outputs, or adjusting settings for low-light conditions. This trigger also adjusts the brightness of the controller’s backlighting automatically when driving at night.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolid-State, Durable Design. \u003c\/strong\u003eBuilt for extreme durability, the D-Switch features a solid-state design with no mechanical relays to wear out, or physical fuses to replace. The hub is encapsulated with an aluminum heatsink, ensuring superior heat dissipation. Both the hub and controller feature an IP67 weather resistance rating for all electronics, excluding wiring terminals, ensuring long-term reliability and performance. The mount included in the kit is constructed out of 10-gauge stainless steel and finished in a durable powdercoat. With a 3-year limited warranty, this kit is built to withstand whatever you throw at it, whether you're off-roading or on the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we directly manufacture and engineer an increasing number of products ourselves in the United States using globally sourced materials, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Bracket-Only","offer_id":67721668558997,"sku":"DD8570","price":87.96,"currency_code":"USD","in_stock":true},{"title":"D-Switch w\/ Bracket","offer_id":67721668591765,"sku":"DD8784","price":567.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2025_toyota_4runner_universal_d-switch_hub_mounting_kit_installed_-5.jpg?v=1792097839"},{"product_id":"dome-light-led-for-2016-2017-subaru-crosstrek-one","title":"Dome Light LED for 2016-2017 Subaru Crosstrek (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWarm or cool white LED, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek dome light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 31mm Festoon bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eReplacement LED bulbs are a simple way to improve the look and styling of the dome lights on your Subaru Crosstrek. Compared to the original incandescent bulbs, they will provide a brighter appearance with modern color. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Crosstrek.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColor Options.\u003c\/strong\u003e In addition to vibrant colors of blue, red, amber, and green, our dome light bulbs are available in a cool white 6000K, and warm white 3000K. Whether you want a modern cool white appearance, or a traditional warm white color with more output, we have the color to fit your needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze the exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SMF2 \/ Blue","offer_id":67721701392533,"sku":"DD0067S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Green","offer_id":67721701425301,"sku":"DD0068S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Warm White (3000K)","offer_id":67721701458069,"sku":"DD0069S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Red","offer_id":67721701490837,"sku":"DD0070S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Cool White (6000K)","offer_id":67721701523605,"sku":"DD0071S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Amber","offer_id":67721701556373,"sku":"DD0145S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Blue","offer_id":67721701589141,"sku":"DD0146S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Green","offer_id":67721701621909,"sku":"DD0147S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Warm White (3000K)","offer_id":67721701654677,"sku":"DD0148S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Red","offer_id":67721701687445,"sku":"DD0149S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Cool White (6000K)","offer_id":67721701720213,"sku":"DD0150S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Amber","offer_id":67721701752981,"sku":"DD0189S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Amber","offer_id":67721701785749,"sku":"DD0295S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Blue","offer_id":67721701818517,"sku":"DD0296S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Cool White (6000K)","offer_id":67721701851285,"sku":"DD0299S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Red","offer_id":67721701884053,"sku":"DD0301S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Warm White (3000K)","offer_id":67721701916821,"sku":"DD0351S","price":10.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/31mm_hp6_cool_dome_titled.jpg?v=1792097944"},{"product_id":"dome-light-led-for-2018-2023-subaru-crosstrek-one","title":"Dome Light LED for 2018-2023 Subaru Crosstrek (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWarm or cool white LED, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek dome light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 29mm Festoon bulb size\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eReplacement LED bulbs are a simple way to improve the look and styling of the dome lights on your Subaru Crosstrek. Compared to the original incandescent bulbs, they will provide a brighter appearance with modern color. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Crosstrek.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColor Options.\u003c\/strong\u003e In addition to vibrant colors of blue, red, and amber, our dome light bulbs are available in a cool white 6000K, and warm white 3000K. Whether you want a modern cool white appearance, or a traditional warm white color with more output, we have the color to fit your needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze the exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP6 \/ Amber","offer_id":67721706176661,"sku":"DD0288S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Blue","offer_id":67721706209429,"sku":"DD0289S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Cool White (6000K)","offer_id":67721706242197,"sku":"DD0292S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Red","offer_id":67721706274965,"sku":"DD0294S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Warm White (3000K)","offer_id":67721706307733,"sku":"DD0350S","price":10.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dom-2998_118409.jpg?v=1792097876"},{"product_id":"elite-series-fog-lamps-for-2013-2015-subaru-xv-crosstrek-pair","title":"Elite Series Fog Lamps for 2013-2015 Subaru XV Crosstrek (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance OEM-grade replacement for Subaru XV Crosstrek\u003c\/li\u003e\n\u003cli\u003eCustom-engineered optic provides extremely wide, intense light output\u003c\/li\u003e\n\u003cli\u003eDistinctive integrated amber backlight\u003c\/li\u003e\n\u003cli\u003eRoad-legal fog light (SAE F3 compliant)\u003c\/li\u003e\n\u003cli\u003ePlug and play main beam, no modification needed\u003c\/li\u003e\n\u003cli\u003eEngineered and assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFactory fog lights are built to meet minimum output requirements. Every aftermarket design available provides similar lackluster performance, but with an LED. The focus has been on LED appearance, not increased output. There has never been an aftermarket fog light designed from the ground up for performance - until now.\u003c\/p\u003e\n\u003cp\u003eIntroducing the Elite Series Fog Lamps: the first OE-style fog lights that were designed for true performance. With a custom-engineered patent-pending optic, multi-die automotive emitters, and high-power full-copper circuit boards, the Elite Series fog light for the Subaru XV Crosstrek delivers up to 5 times more output than halogen lamps. With a plug-and-play installation, this is one of the easiest and most effective upgrades you can make to improve your visibility in inclement weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput that Outperforms. \u003c\/strong\u003eThe Elite Series Fog Lamp is built around a highly-engineered single-piece PMMA lens. This optic was carefully designed using advanced optical simulation software to produce a light pattern that is wider than any other aftermarket fog lamp on the market, with an 80-degree spread of highly intense light. Even with this extremely wide band of light, the pattern is extremely smooth throughout, with an extremely sharp cutoff to avoid glare to other drivers, including a BMW-style “color flicker” at the very edge of the pattern. Diode Dynamics engineers accomplished all this while still meeting SAE F3 fog light standards, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Elite_Series_Foglamps_-_Comparision_Images_B.jpg\" alt=\"SS3 Beam Patterns\" width=\"639\" height=\"170\"\u003e\u003c\/p\u003e\t\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003eThe white is a 6000K color temperature, which is a true cool white output. This will perfectly match other LEDs on your vehicle, such as DRLs or running lights. The white option also offers a premium BMW-style color band at the very top of the beam pattern.\u003c\/p\u003e\n\u003cp\u003eThe selective yellow option is 3000K in color temperature, which is great for high contrast in inclement weather, or in providing a distinctive look on the road. The yellow lamp consists of a yellow multi-die LED emitter paired with a yellow-tinted lens, to provide unmatched output and optical efficiency, even with the intense yellow output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eAll Elite Series Fog Lamps come standard with an integrated amber accent light. This backlight feature fully illuminates the main lens with amber LEDs, intended to match other position, sidemarker, or corner lights on your XV Crosstrek. This feature can be wired to any constant 12-volt source for your desired vehicle function, using the included tap connector. It will shut off automatically if the main beam is activated. Check local laws and regulations for acceptable use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-On Fitment. \u003c\/strong\u003eElite Series Fog Lamps were designed using a 3D scanner and installed on the vehicle in our testing garage, so you can rest assured they will be a perfect fit. They can be installed on your Subaru XV Crosstrek in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place, using sturdy glass-fiber-reinforced brackets. With built-in adjustment, the lamps can be aimed after installation. To wire them up, a pair of waterproof plug-and-play adapters are included to connect the lights to your factory bulb sockets. Click here to learn how to aim your Elite Series Foglamps: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=p5RXq28ZOYo\" target=\"_blank\"\u003e\u003cspan style=\"color: #c00000\"\u003eHow to Aim Your Fog Lights\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembled with Quality - in the USA. \u003c\/strong\u003eElite Series Fog Lamps are assembled in the USA using OEM-grade materials, including a precision aluminum casting, UV-coated outer lens, copper-core circuit board, and multi-die automotive emitters. After being assembled by Diode Dynamics in St. Louis, Missouri, they are robotically sealed with urethane epoxy for long-lasting protection against moisture, and packaged in form-fit foam for safe transportation. No expense has been spared, from materials to assembly, right here in America.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability - Backed for 8 Years. \u003c\/strong\u003eLike our popular Stage Series lineup, Elite Series LED lamps have been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components on your XV Crosstrek. With integrated moisture-proof vents, the lamps can “breath” with changes in temperature, maintaining a strong seal over time. And with built-in circuit protection for voltage spikes and reverse polarity, these lights will keep working for years. They are backed by an industry-leading 8 year limited warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White (6000K)","offer_id":67721804284053,"sku":"DD5128P","price":207.96,"currency_code":"USD","in_stock":true},{"title":"Yellow (3000K)","offer_id":67721804316821,"sku":"DD5129P","price":207.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color (6000K\/3000K)","offer_id":67721804349589,"sku":"DD5183P","price":255.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/esf-2997_146474.jpg?v=1792448881"},{"product_id":"elite-series-fog-lamps-for-2016-2026-subaru-crosstrek-pair","title":"Elite Series Fog Lamps for 2016-2026 Subaru Crosstrek (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance OEM-grade replacement for Subaru Crosstrek\u003c\/li\u003e\n\u003cli\u003eCustom-engineered optic provides extremely wide, intense light output\u003c\/li\u003e\n\u003cli\u003eDistinctive integrated amber backlight\u003c\/li\u003e\n\u003cli\u003eRoad-legal fog light (SAE F3 compliant)\u003c\/li\u003e\n\u003cli\u003ePlug and play main beam, no modification needed\u003c\/li\u003e\n\u003cli\u003eEngineered and assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFactory fog lights are built to meet minimum output requirements. Every aftermarket design available provides similar lackluster performance, but with an LED. The focus has been on LED appearance, not increased output. There has never been an aftermarket fog light designed from the ground up for performance - until now.\u003c\/p\u003e\n\u003cp\u003eIntroducing the Elite Series Fog Lamps: the first OE-style fog lights that were designed for true performance. With a custom-engineered patent-pending optic, multi-die automotive emitters, and high-power full-copper circuit boards, the Elite Series fog light for the Subaru Crosstrek delivers up to 5 times more output than halogen lamps. With a plug-and-play installation, this is one of the easiest and most effective upgrades you can make to improve your visibility in inclement weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput that Outperforms. \u003c\/strong\u003eThe Elite Series Fog Lamp is built around a highly-engineered single-piece PMMA lens. This optic was carefully designed using advanced optical simulation software to produce a light pattern that is wider than any other aftermarket fog lamp on the market, with an 80-degree spread of highly intense light. Even with this extremely wide band of light, the pattern is extremely smooth throughout, with an extremely sharp cutoff to avoid glare to other drivers, including a BMW-style “color flicker” at the very edge of the pattern. Diode Dynamics engineers accomplished all this while still meeting SAE F3 fog light standards, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Elite_Series_Foglamps_-_Comparision_Images_B.jpg\" alt=\"SS3 Beam Patterns\" width=\"639\" height=\"170\"\u003e\u003c\/p\u003e\t\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003eThe white is a 6000K color temperature, which is a true cool white output. This will perfectly match other LEDs on your vehicle, such as DRLs or running lights. The white option also offers a premium BMW-style color band at the very top of the beam pattern.\u003c\/p\u003e\n\u003cp\u003eThe selective yellow option is 3000K in color temperature, which is great for high contrast in inclement weather, or in providing a distinctive look on the road. The yellow lamp consists of a yellow multi-die LED emitter paired with a yellow-tinted lens, to provide unmatched output and optical efficiency, even with the intense yellow output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eAll Elite Series Fog Lamps come standard with an integrated amber accent light. This backlight feature fully illuminates the main lens with amber LEDs, intended to match other position, sidemarker, or corner lights on your Crosstrek. This feature can be wired to any constant 12-volt source for your desired vehicle function, using the included tap connector. It will shut off automatically if the main beam is activated. Check local laws and regulations for acceptable use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-On Fitment. \u003c\/strong\u003eElite Series Fog Lamps were designed using a 3D scanner and installed on the vehicle in our testing garage, so you can rest assured they will be a perfect fit. They can be installed on your Subaru Crosstrek in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place, using sturdy glass-fiber-reinforced brackets. With built-in adjustment, the lamps can be aimed after installation. To wire them up, a pair of waterproof plug-and-play adapters are included to connect the lights to your factory bulb sockets. Click here to learn how to aim your Elite Series Foglamps: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=p5RXq28ZOYo\" target=\"_blank\"\u003e\u003cspan style=\"color: #c00000\"\u003eHow to Aim Your Fog Lights\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembled with Quality - in the USA. \u003c\/strong\u003eElite Series Fog Lamps are assembled in the USA using OEM-grade materials, including a precision aluminum casting, UV-coated outer lens, copper-core circuit board, and multi-die automotive emitters. After being assembled by Diode Dynamics in St. Louis, Missouri, they are robotically sealed with urethane epoxy for long-lasting protection against moisture, and packaged in form-fit foam for safe transportation. No expense has been spared, from materials to assembly, right here in America.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability - Backed for 8 Years. \u003c\/strong\u003eLike our popular Stage Series lineup, Elite Series LED lamps have been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components on your Crosstrek. With integrated moisture-proof vents, the lamps can “breath” with changes in temperature, maintaining a strong seal over time. And with built-in circuit protection for voltage spikes and reverse polarity, these lights will keep working for years. They are backed by an industry-leading 8 year limited warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White (6000K)","offer_id":67721807790229,"sku":"DD5128P","price":207.96,"currency_code":"USD","in_stock":true},{"title":"Yellow (3000K)","offer_id":67721807822997,"sku":"DD5129P","price":207.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color (6000K\/3000K)","offer_id":67721807855765,"sku":"DD5183P","price":255.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2021_subaru_crosstrek_elite_foglamp_location_close_driver_on.jpg?v=1792098085"},{"product_id":"elite-series-fog-lamps-for-2024-2026-subaru-crosstrek-wilderness-pair","title":"Elite Series Fog Lamps for 2024-2026 Subaru Crosstrek Wilderness (pair)","description":"\u003ch3\u003eAbout the Brand\u003c\/h3\u003e\n\u003cp\u003eFoxbeam Lighting is an independent design firm, specializing in unique lighting and mounting solutions. This kit includes Foxbeam's durable SLS 3D-printed mounting brackets, delivered with your choice of Diode Dynamics lighting.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance OEM-grade replacement for your Subaru Crosstrek fog light\u003c\/li\u003e\n\u003cli\u003eCustom-engineered optic provides extremely wide, intense light output\u003c\/li\u003e\n\u003cli\u003eDistinctive integrated amber backlight\u003c\/li\u003e\n\u003cli\u003eRoad-legal fog light (SAE F3 compliant)\u003c\/li\u003e\n\u003cli\u003ePlug and play main beam, no modification needed\u003c\/li\u003e\n\u003cli\u003eEngineered and assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFactory fog lights are built to meet minimum output requirements. Every aftermarket design available provides similar lackluster performance, but with an LED. The focus has been on LED appearance, not increased output. There has never been an aftermarket fog light designed from the ground up for performance - until now.\u003c\/p\u003e\n\u003cp\u003eIntroducing the Elite Series Fog Lamps: the first OE-style fog lights that were designed for true performance. With a custom-engineered patent-pending optic, multi-die automotive emitters, and high-power full-copper circuit boards, the Elite Series fog light for the Subaru Crosstrek delivers double the output compared to factory halogen lamps. With a plug-and-play installation, this is one of the easiest and most effective upgrades you can make to improve your visibility in inclement weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput that Outperforms. \u003c\/strong\u003eThe Elite Series Fog Lamp is built around a highly-engineered single-piece PMMA lens. This optic was carefully designed using advanced optical simulation software to produce a light pattern that is wider than any other aftermarket fog lamp on the market, with an 80-degree spread of highly intense light. Even with this extremely wide band of light, the pattern is extremely smooth throughout, with an extremely sharp cutoff to avoid glare to other drivers, including a BMW-style “color flicker” at the very edge of the pattern. Diode Dynamics engineers accomplished all this while still meeting SAE F3 fog light standards, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Elite_Series_Foglamps_-_Comparision_Images_B.jpg\" alt=\"Elite LED Fog Comparison\" width=\"100%\" height=\"170\"\u003e\u003c\/p\u003e\t\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003eThe white is a 6000K color temperature, which is a true cool white output. This will perfectly match other LEDs on your vehicle, such as DRLs or running lights. The white option also offers a premium BMW-style color band at the very top of the beam pattern.\u003c\/p\u003e\n\u003cp\u003eThe selective yellow option is 3000K in color temperature, which is great for high contrast in inclement weather, or in providing a distinctive look on the road. The yellow lamp consists of a yellow multi-die LED emitter paired with a yellow-tinted lens, to provide unmatched output and optical efficiency, even with the intense yellow output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eAll Elite Series Fog Lamps come standard with an integrated amber accent light. This backlight feature fully illuminates the main lens with amber LEDs, intended to match other position, sidemarker, or corner lights on your Crosstrek. This feature can be wired to any constant 12-volt source for your desired vehicle function, using the included tap connector. It will shut off automatically if the main beam is activated. Check local laws and regulations for acceptable use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-On Fitment. \u003c\/strong\u003eElite Series Fog Lamps were designed using a 3D scanner and installed on the vehicle in our testing garage, so you can rest assured they will be a perfect fit. They can be installed on your Subaru Crosstrek in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place, using the included brackets. With built-in adjustment, the lamps can be aimed after installation. To wire them up, a pair of waterproof plug-and-play adapters are included to connect the lights to your factory bulb sockets. Click here to learn how to aim your Elite Series Foglamps: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=p5RXq28ZOYo\" target=\"_blank\"\u003e\u003cspan style=\"color: #c00000\"\u003eHow to Aim Your Fog Lights\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembled with Quality - in the USA. \u003c\/strong\u003eElite Series Fog Lamps are assembled in the USA using OEM-grade materials, including a precision aluminum casting, UV-coated outer lens, copper-core circuit board, and multi-die automotive emitters. After being assembled by Diode Dynamics in St. Louis, Missouri, they are robotically sealed with urethane epoxy for long-lasting protection against moisture, and packaged in form-fit foam for safe transportation. No expense has been spared, from materials to assembly, right here in America.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eLike our popular Stage Series lineup, Elite Series LED lamps have been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components on your Crosstrek. With integrated moisture-proof vents, the lamps can “breath” with changes in temperature, maintaining a strong seal over time. And with built-in circuit protection for voltage spikes and reverse polarity, these lights will keep working for years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White (6000K)","offer_id":67721809363093,"sku":"DD7985","price":239.96,"currency_code":"USD","in_stock":true},{"title":"Yellow (3000K)","offer_id":67721809395861,"sku":"DD7986","price":239.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color (6000K\/3000K)","offer_id":67721809428629,"sku":"DD8915","price":287.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/esf-2999_218515.jpg?v=1792098087"},{"product_id":"fog-light-leds-for-2016-2023-subaru-crosstrek-pair","title":"Fog Light LEDs for 2016-2023 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Subaru Crosstrek. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your Crosstrek.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Subaru Crosstrek are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your Crosstrek without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"H11 \/ SL2 \/ Cool White (6000K)","offer_id":67721893380245,"sku":"DD0467P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"H9 \/ SL2 \/ Yellow (3000K)","offer_id":67721893413013,"sku":"DD0468P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"5202 \/ SL2 \/ Cool White (6000K)","offer_id":67721893445781,"sku":"DD0477P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"5202 \/ SL2 \/ Yellow (3000K)","offer_id":67721893478549,"sku":"DD0478P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"H11 \/ SL2 Pro (2400 lumens) \/ Cool White (6000K)","offer_id":67721893511317,"sku":"DD0483P","price":153.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0467p_sl2_h11_h8_h9_white_pair_fog_c_1.jpg?v=1792098336"},{"product_id":"front-turn-signal-leds-for-2016-subaru-crosstrek-hybrid-pair","title":"Front Turn Signal LEDs for 2016 Subaru Crosstrek Hybrid (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek Hybrid front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Crosstrek Hybrid illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Crosstrek Hybrid.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Turn_Signal_-_Comparision_Image.jpg\" alt=\"Front Turn Signal Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer an amber color option, which is correct to SAE\/DOT \"amber\" requirements. Whether you have a clear lens or an amber reflector over the turn signal bulb on your Crosstrek Hybrid, amber is the correct emitter color for maximum turn signal output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Crosstrek Hybrid looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Crosstrek Hybrid, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek Hybrid. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67721985261717,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67721985294485,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67721985327253,"sku":"DD0114P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/7443_xp80_amber_pair_titled_1_10.jpg?v=1792098557"},{"product_id":"front-turn-signal-leds-for-2018-2026-subaru-crosstrek-pair","title":"Front Turn Signal LEDs for 2018-2026 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7443 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Crosstrek illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Crosstrek.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Turn_Signal_-_Comparision_Image.jpg\" alt=\"Front Turn Signal Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer an amber color option, which is correct to SAE\/DOT \"amber\" requirements. Whether you have a clear lens or an amber reflector over the turn signal bulb on your Crosstrek, amber is the correct emitter color for maximum turn signal output.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Crosstrek looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Crosstrek, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67721990275221,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67721990307989,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67721990340757,"sku":"DD0114P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/7443_xp80_amber_pair_titled_1_11.jpg?v=1792098578"},{"product_id":"hd-led-halos-for-2016-2017-subaru-crosstrek-pair","title":"HD LED Halos for 2016-2017 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e \u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e \u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e \u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e \u003cli\u003eAssembled in USA\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eHDHalo Technology.\u003c\/strong\u003e These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSizing:\u003c\/strong\u003e All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWiring:\u003c\/strong\u003e All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePWM Control:\u003c\/strong\u003e Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite:\u003c\/strong\u003e White Low Power, 50% brightness\u003cbr\u003e\u003cstrong\u003eRed:\u003c\/strong\u003e White High Power, 100% brightness\u003cbr\u003e\u003cstrong\u003eYellow: \u003c\/strong\u003eAmber Signal, double brightness, flashing (dims if powered more than two seconds)\u003cbr\u003e\u003cstrong\u003eBlack:\u003c\/strong\u003e Ground\u003c\/p\u003e \u003cp\u003eAll input wires activate the halos, at different brightness levels. \u003cstrong\u003eAll switchback halos ship with \"low\" priority drivers.\u003c\/strong\u003e This means that if \u003cstrong\u003eboth\u003c\/strong\u003e \"low\" and \"high\" power inputs are powered, the LED will light up in white, with \u003cstrong\u003elow\u003c\/strong\u003e power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up in amber color, intended for signaling. If you'd like to use amber all the time, no problem! It will dim automatically if powered for more than two seconds, to keep it safe.\u003c\/p\u003e \u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"90 \/ Red","offer_id":67722027630741,"sku":"DD2050","price":83.96,"currency_code":"USD","in_stock":true},{"title":"90 \/ Switchback Cool White and Amber","offer_id":67722027663509,"sku":"DD2062","price":83.96,"currency_code":"USD","in_stock":true},{"title":"90 \/ Cool White (6000K)","offer_id":67722027696277,"sku":"DD2074","price":83.96,"currency_code":"USD","in_stock":true},{"title":"90 \/ Amber","offer_id":68171625332885,"sku":"DD2026","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/hdled_halo_90mm_white_4_5.jpg?v=1792098612"},{"product_id":"high-beam-led-headlight-bulbs-for-2016-2017-subaru-crosstrek-pair","title":"High Beam LED Headlight Bulbs for 2016-2017 Subaru Crosstrek (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\t\n\u003cli\u003eDirect replacement for Subaru Crosstrek High Beam headlight bulbs with compact fitment.\u003c\/li\u003e\n\u003cli\u003eAdvanced LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003eInternal cooling for superior reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003cli\u003eBacked by limited lifetime warranty.\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSL2 and SL2 Pro LED Headlight\u003c\/h3\u003e\n\u003cp\u003eDiode Dynamics has set the standard for LED bulbs with a history of solutions engineered to provide a true increase in performance. Thanks to improvements in technology, we are excited to redefine the standard once again. Introducing the SL2 and SL2 Pro LED headlight bulbs! The new SL2 and SL2 Pro LED bulbs have been carefully designed as a direct plug-and-play replacement for your Subaru Crosstrek headlight bulbs, providing a significant increase in output, in a compact package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext-Generation TST Technology. \u003c\/strong\u003eThe SL2 Pro features new thermal separation technology (TST) LEDs. Unlike a traditional LED chip, TST LEDs are designed with electrical connections on the top. This means the entire bottom surface of the LED can be dedicated to channeling thermal energy out and away from the LED. This lowers thermal resistance, allowing the SL2 Pro to run at higher power levels than traditional LED bulbs, while maintaining focus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Optical Focus.\u003c\/strong\u003e The headlight housings on your Subaru Crosstrek are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright the bulb is - you won't have a focused hotspot of light to shine down the road where you need it. Instead, you'll have more glare, which lights up the foreground and makes it harder to see in the distance. The SL2 and SL2 Pro LED bulbs were engineered to focus light just like your Crosstrek original bulb, matching the original beam pattern while still providing an increase in total output. These days, some LED bulbs on the market use the smallest LEDs possible to accomplish focus, but this leads to \"over-focus\", where you begin seeing streaks, lines, and harsh cutoffs in the beam pattern. Instead of using the smallest LEDs possible, the SL2 and SL2 Pro LEDs were optimized to provide a smooth and comfortable beam pattern, while still maintaining focus and increased output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Cooling.\u003c\/strong\u003e The SL2 Pro features an integrated top-mounted fan for superior thermal management and reliability. Since the fan is sealed inside the housing, there's no concerns about damage from dust or moisture over time. And with the fan on the top of the bulb, the cooling happens right next to the LEDs - the source of the heat. While standard LED bulbs use heat pipes and other tricks to move heat to the bottom of the bulb, where it's cooled off, the SL2 Pro keeps it simple and more efficient. This provides maximum cooling efficiency and output.\u003c\/p\u003e\n\u003cp\u003eThe SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Integrated Design. \u003c\/strong\u003eUnlike traditional LED bulbs, the SL2 and SL2 Pro LED bulbs don't have any external drivers. Along with their compact size, that means excellent fitment inside your Crosstrek's housing, without the need to tuck away bulky drivers. Installation is easy - simply remove your factory bulbs and these LED bulbs will fit in their place, with a plug-and-play connector. And if your original bulb is installed at an angle, no worries - SL2 Pro has you covered with an adjustable collar that can be securely locked at the correct position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 and SL2 Pro LED was engineered for reliability, from its full metal construction to the fully-sealed design. The SL2 and SL2 Pro were put through their paces in our environmental testing chambers - where the bulb lasted through repeated thermal cycles from -40 through 85 degrees Celsius (-40 to 185F), along with a range of other environmental tests. They're also designed with transient protection, to prevent premature failure from electrical spikes in the vehicle. They're even compatible up to 30V! We're so confident in the SL2 and SL2 Pro LED bulbs, that they're backed by an industry-leading limited LIFETIME warranty. See details at \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\n\u003ch3\u003eBulb Options\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e9005 SL2\u003c\/strong\u003e - \u003ca href=\"https:\/\/www.diodedynamics.com\/9005-sl2-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e\n\u003cli\u003e1400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e9005 SL2 Pro\u003c\/strong\u003e\u003ca href=\"https:\/\/www.diodedynamics.com\/9005-sl2-pro-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced TST LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003e2400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003e6000K cool white color.\u003c\/li\u003e\n\u003cli\u003eFully integrated design, no wires or external drivers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"SL2","offer_id":67722058039445,"sku":"DD0463P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 Pro (2400 lumens)","offer_id":67722058072213,"sku":"DD0481P","price":153.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2997-high-ledheadlight_215329.jpg?v=1792098756"},{"product_id":"high-beam-led-headlight-bulbs-for-2018-2023-subaru-crosstrek-pair","title":"High Beam LED Headlight Bulbs for 2018-2023 Subaru Crosstrek (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\t\n\u003cli\u003eDirect replacement for Subaru Crosstrek High Beam headlight bulbs with compact fitment.\u003c\/li\u003e\n\u003cli\u003eAdvanced LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003eInternal cooling for superior reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003cli\u003eBacked by limited lifetime warranty.\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSL2 and SL2 Pro LED Headlight\u003c\/h3\u003e\n\u003cp\u003eDiode Dynamics has set the standard for LED bulbs with a history of solutions engineered to provide a true increase in performance. Thanks to improvements in technology, we are excited to redefine the standard once again. Introducing the SL2 and SL2 Pro LED headlight bulbs! The new SL2 and SL2 Pro LED bulbs have been carefully designed as a direct plug-and-play replacement for your Subaru Crosstrek headlight bulbs, providing a significant increase in output, in a compact package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext-Generation TST Technology. \u003c\/strong\u003eThe SL2 Pro features new thermal separation technology (TST) LEDs. Unlike a traditional LED chip, TST LEDs are designed with electrical connections on the top. This means the entire bottom surface of the LED can be dedicated to channeling thermal energy out and away from the LED. This lowers thermal resistance, allowing the SL2 Pro to run at higher power levels than traditional LED bulbs, while maintaining focus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Optical Focus.\u003c\/strong\u003e The headlight housings on your Subaru Crosstrek are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright the bulb is - you won't have a focused hotspot of light to shine down the road where you need it. Instead, you'll have more glare, which lights up the foreground and makes it harder to see in the distance. The SL2 and SL2 Pro LED bulbs were engineered to focus light just like your Crosstrek original bulb, matching the original beam pattern while still providing an increase in total output. These days, some LED bulbs on the market use the smallest LEDs possible to accomplish focus, but this leads to \"over-focus\", where you begin seeing streaks, lines, and harsh cutoffs in the beam pattern. Instead of using the smallest LEDs possible, the SL2 and SL2 Pro LEDs were optimized to provide a smooth and comfortable beam pattern, while still maintaining focus and increased output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Cooling.\u003c\/strong\u003e The SL2 Pro features an integrated top-mounted fan for superior thermal management and reliability. Since the fan is sealed inside the housing, there's no concerns about damage from dust or moisture over time. And with the fan on the top of the bulb, the cooling happens right next to the LEDs - the source of the heat. While standard LED bulbs use heat pipes and other tricks to move heat to the bottom of the bulb, where it's cooled off, the SL2 Pro keeps it simple and more efficient. This provides maximum cooling efficiency and output.\u003c\/p\u003e\n\u003cp\u003eThe SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Integrated Design. \u003c\/strong\u003eUnlike traditional LED bulbs, the SL2 and SL2 Pro LED bulbs don't have any external drivers. Along with their compact size, that means excellent fitment inside your Crosstrek's housing, without the need to tuck away bulky drivers. Installation is easy - simply remove your factory bulbs and these LED bulbs will fit in their place, with a plug-and-play connector. And if your original bulb is installed at an angle, no worries - SL2 Pro has you covered with an adjustable collar that can be securely locked at the correct position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 and SL2 Pro LED was engineered for reliability, from its full metal construction to the fully-sealed design. The SL2 and SL2 Pro were put through their paces in our environmental testing chambers - where the bulb lasted through repeated thermal cycles from -40 through 85 degrees Celsius (-40 to 185F), along with a range of other environmental tests. They're also designed with transient protection, to prevent premature failure from electrical spikes in the vehicle. They're even compatible up to 30V! We're so confident in the SL2 and SL2 Pro LED bulbs, that they're backed by an industry-leading limited LIFETIME warranty. See details at \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\n\u003ch3\u003eBulb Options\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e9005 SL2\u003c\/strong\u003e - \u003ca href=\"https:\/\/www.diodedynamics.com\/9005-sl2-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e\n\u003cli\u003e1400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e9005 SL2 Pro\u003c\/strong\u003e\u003ca href=\"https:\/\/www.diodedynamics.com\/9005-sl2-pro-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced TST LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003e2400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003e6000K cool white color.\u003c\/li\u003e\n\u003cli\u003eFully integrated design, no wires or external drivers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"SL2","offer_id":67722060497045,"sku":"DD0637P","price":146.96,"currency_code":"USD","in_stock":true},{"title":"SL2 Pro (2400 lumens)","offer_id":67722060529813,"sku":"DD0639P","price":188.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2998-high-ledheadlight_216217.jpg?v=1792098771"},{"product_id":"license-plate-leds-for-2016-2026-subaru-crosstrek-pair","title":"License Plate LEDs for 2016-2026 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek license plate bulbs\u003c\/li\u003e \u003cli\u003eIncreased output with modern LED appearance\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eUpgrade. \u003c\/strong\u003eAdd a modern appearance to your Subaru Crosstrek with these replacement LED bulbs! These bright LEDs are available in a number of colors including cool white, to replace the factory yellowish incandescent bulbs. If you've been looking for a simple way to upgrade your Crosstrek, you've found it!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_License.jpg\" alt=\"License Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Warm White (3000K)","offer_id":67722197401749,"sku":"DD0020P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Natural White (4000K)","offer_id":67722197434517,"sku":"DD0021P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Pure White (5000K)","offer_id":67722197467285,"sku":"DD0022P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67722197500053,"sku":"DD0024P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67722197532821,"sku":"DD0027P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Natural White (4000K)","offer_id":67722197565589,"sku":"DD0028P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Pure White (5000K)","offer_id":67722197598357,"sku":"DD0029P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67722197631125,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Warm White (3000K)","offer_id":67722197663893,"sku":"DD0035P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Cool White (6000K)","offer_id":67722197696661,"sku":"DD0037P","price":7.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/lic-2997_83702.jpg?v=1792099052"},{"product_id":"low-beam-led-headlight-bulbs-for-2016-2023-subaru-crosstrek-pair","title":"Low Beam LED Headlight Bulbs for 2016-2023 Subaru Crosstrek (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\t\n\u003cli\u003eDirect replacement for Subaru Crosstrek Low Beam headlight bulbs with compact fitment.\u003c\/li\u003e\n\u003cli\u003eAdvanced LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003eInternal cooling for superior reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003cli\u003eBacked by limited lifetime warranty.\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSL2 and SL2 Pro LED Headlight\u003c\/h3\u003e\n\u003cp\u003eDiode Dynamics has set the standard for LED bulbs with a history of solutions engineered to provide a true increase in performance. Thanks to improvements in technology, we are excited to redefine the standard once again. Introducing the SL2 and SL2 Pro LED headlight bulbs! The new SL2 and SL2 Pro LED bulbs have been carefully designed as a direct plug-and-play replacement for your Subaru Crosstrek headlight bulbs, providing a significant increase in output, in a compact package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNext-Generation TST Technology. \u003c\/strong\u003eThe SL2 Pro features new thermal separation technology (TST) LEDs. Unlike a traditional LED chip, TST LEDs are designed with electrical connections on the top. This means the entire bottom surface of the LED can be dedicated to channeling thermal energy out and away from the LED. This lowers thermal resistance, allowing the SL2 Pro to run at higher power levels than traditional LED bulbs, while maintaining focus.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptimized Optical Focus.\u003c\/strong\u003e The headlight housings on your Subaru Crosstrek are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright the bulb is - you won't have a focused hotspot of light to shine down the road where you need it. Instead, you'll have more glare, which lights up the foreground and makes it harder to see in the distance. The SL2 and SL2 Pro LED bulbs were engineered to focus light just like your Crosstrek original bulb, matching the original beam pattern while still providing an increase in total output. These days, some LED bulbs on the market use the smallest LEDs possible to accomplish focus, but this leads to \"over-focus\", where you begin seeing streaks, lines, and harsh cutoffs in the beam pattern. Instead of using the smallest LEDs possible, the SL2 and SL2 Pro LEDs were optimized to provide a smooth and comfortable beam pattern, while still maintaining focus and increased output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Cooling.\u003c\/strong\u003e The SL2 Pro features an integrated top-mounted fan for superior thermal management and reliability. Since the fan is sealed inside the housing, there's no concerns about damage from dust or moisture over time. And with the fan on the top of the bulb, the cooling happens right next to the LEDs - the source of the heat. While standard LED bulbs use heat pipes and other tricks to move heat to the bottom of the bulb, where it's cooled off, the SL2 Pro keeps it simple and more efficient. This provides maximum cooling efficiency and output.\u003c\/p\u003e\n\u003cp\u003eThe SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFully Integrated Design. \u003c\/strong\u003eUnlike traditional LED bulbs, the SL2 and SL2 Pro LED bulbs don't have any external drivers. Along with their compact size, that means excellent fitment inside your Crosstrek's housing, without the need to tuck away bulky drivers. Installation is easy - simply remove your factory bulbs and these LED bulbs will fit in their place, with a plug-and-play connector. And if your original bulb is installed at an angle, no worries - SL2 Pro has you covered with an adjustable collar that can be securely locked at the correct position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 and SL2 Pro LED was engineered for reliability, from its full metal construction to the fully-sealed design. The SL2 and SL2 Pro were put through their paces in our environmental testing chambers - where the bulb lasted through repeated thermal cycles from -40 through 85 degrees Celsius (-40 to 185F), along with a range of other environmental tests. They're also designed with transient protection, to prevent premature failure from electrical spikes in the vehicle. They're even compatible up to 30V! We're so confident in the SL2 and SL2 Pro LED bulbs, that they're backed by an industry-leading limited LIFETIME warranty. See details at \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\n\u003ch3\u003eBulb Options\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eH11 SL2\u003c\/strong\u003e - \u003ca href=\"https:\/\/www.diodedynamics.com\/h11-sl2-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e\n\u003cli\u003e1400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e\n\u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eH11 SL2 Pro\u003c\/strong\u003e - \u003ca href=\"https:\/\/www.diodedynamics.com\/h11-sl2-pro-led-bulbs-pair.html\" target=\"_blank\"\u003eMore details\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced TST LED Technology for industry-leading performance.\u003c\/li\u003e\n\u003cli\u003e2400 lumens per bulb.\u003c\/li\u003e\n\u003cli\u003e6000K cool white color.\u003c\/li\u003e\n\u003cli\u003eFully integrated design, no wires or external drivers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Diode Dynamics","offers":[{"title":"SL2","offer_id":67722229350549,"sku":"DD0467P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 Pro (2400 lumens)","offer_id":67722229383317,"sku":"DD0483P","price":153.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2997-low-ledheadlight_211712.jpg?v=1792099170"},{"product_id":"map-light-leds-for-2018-2023-subaru-crosstrek-pair","title":"Map Light LEDs for 2018-2023 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern cool white appearance, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek map light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 29mm Festoon bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eThis replacement LED bulb is a great way to improve the look and function of the map lights on your Subaru Crosstrek. They'll provide a modern, premium appearance compared to the original incandescent bulb. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Crosstrek.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_Map_-_SMF2_vs_HP6.jpg\" width=\"639\" height=\"170\" alt=\"Festoon Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Amber \/ Pair","offer_id":67722347085973,"sku":"DD0288P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Pair","offer_id":67722347118741,"sku":"DD0289P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"Cool White (6000K) \/ Pair","offer_id":67722347151509,"sku":"DD0292P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"Red \/ Pair","offer_id":67722347184277,"sku":"DD0294P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"Warm White (3000K) \/ Pair","offer_id":67722347217045,"sku":"DD0350P","price":19.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/map-2998_117920.jpg?v=1792099310"},{"product_id":"rear-turn-signal-leds-for-2016-subaru-crosstrek-hybrid-pair","title":"Rear Turn Signal LEDs for 2016 Subaru Crosstrek Hybrid (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek Hybrid rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Crosstrek Hybrid illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Crosstrek Hybrid.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Rear_Turn_Signal_-_Comparision_Image.jpg\" alt=\"Amber Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we offer both a red and amber option, which meet SAE\/DOT \"amber\" and \"red\" requirements. If you have a clear lens or an amber reflector over the turn signal bulb on your Crosstrek Hybrid, amber is the correct emitter color for maximum turn signal output. If your vehicle has a red lens over the rear turn signal, then red is the correct emitter for you.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Crosstrek Hybrid looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Crosstrek Hybrid, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek Hybrid. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67722468655253,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67722468688021,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/rerturn-2998_110943.jpg?v=1792099585"},{"product_id":"rear-turn-signal-leds-for-2018-2026-subaru-crosstrek-pair","title":"Rear Turn Signal LEDs for 2018-2026 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Subaru Crosstrek illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Crosstrek.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Rear_Turn_Signal_-_Comparision_Image.jpg\" alt=\"Amber Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we offer both a red and amber option, which meet SAE\/DOT \"amber\" and \"red\" requirements. If you have a clear lens or an amber reflector over the turn signal bulb on your Crosstrek, amber is the correct emitter color for maximum turn signal output. If your vehicle has a red lens over the rear turn signal, then red is the correct emitter for you.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Crosstrek looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Crosstrek, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67722476421269,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67722476454037,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67722476486805,"sku":"DD0114P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/rerturn-2997_110907.jpg?v=1792099602"},{"product_id":"replacement-oem-hid-bulbs-for-2016-2017-subaru-crosstrek-pair","title":"Replacement OEM HID Bulbs for 2016-2017 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for OEM HID bulbs on your Subaru Crosstrek\u003c\/li\u003e \u003cli\u003ePerfect D2R fitment, no modification needed\u003c\/li\u003e \u003cli\u003eTrue colors, with no variance\u003c\/li\u003e \u003cli\u003eCeramic base for heat protection\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eOEM Replacement. \u003c\/strong\u003eThese bulbs are a direct replacement for the factory HID bulbs on your Subaru Crosstrek. Since HID bulbs lose brightness after just a few months of use, these will provide a nice increase in output. You can also improve your vehicle’s styling with a cooler color temperature.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQuality. \u003c\/strong\u003eThere are all kinds of HID bulbs on the market, but these are the best combination of quality, without a high price tag. Manufactured in a fully automated environment, they have high output, and are DOT\/SAE and ECE compliant in arc position and size. Using German quartz and American salts, no expense is spared in their construction. This leads to a long, reliable life, and excellent color.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTrue Colors. \u003c\/strong\u003eWhile some HIDs on the market give off a green or purple tint, these bulbs will provide a pure white color on the road. These HIDs are available in true, accurate color temperatures, which we measure at our photometric test lab. The white color created by these bulbs will provide more visible light on the road, and won’t cause distraction.\n\u003c\/p\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003e4300K\u003c\/strong\u003e is a natural white output, as seen on vehicles with factory HIDs. It will not have any blue tint to its color, and might appear slightly warm.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e5000K\u003c\/strong\u003e is a pure white output, without any warm hint, and no tint of blue either.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e6000K\u003c\/strong\u003e is our most popular color, which produces an ice white color. It matches best with most LEDs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003e8000K\u003c\/strong\u003e is our highest temperature, which produces an ice blue color. This is not a strong blue color though - it is still primarily white, meaning there will be no decrease in light output.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what vehicle you have, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"4300K","offer_id":67722524459157,"sku":"DD1034P","price":63.96,"currency_code":"USD","in_stock":true},{"title":"5000K","offer_id":67722524491925,"sku":"DD1035P","price":63.96,"currency_code":"USD","in_stock":true},{"title":"6000K","offer_id":67722524524693,"sku":"DD1036P","price":63.96,"currency_code":"USD","in_stock":true},{"title":"8000K","offer_id":67722524557461,"sku":"DD1037P","price":63.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/hidkit4-2997-d2r_91972.jpg?v=1792099740"},{"product_id":"ss3-led-fog-light-kit-for-2024-2026-subaru-crosstrek-wilderness","title":"SS3 LED Fog Light Kit for 2024-2026 Subaru Crosstrek Wilderness","description":"\u003ch3\u003eAbout the Brand\u003c\/h3\u003e\n\u003cp\u003eFoxbeam Lighting is an independent design firm, specializing in unique lighting and mounting solutions. This kit includes Foxbeam's durable SLS 3D-printed mounting brackets, delivered with your choice of Diode Dynamics lighting.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for Subaru Crosstrek fog lamps\u003c\/li\u003e\n\u003cli\u003eAdvanced TIR optics provide high efficiency and focus\u003c\/li\u003e\n\u003cli\u003eSAE-compliant road-legal output\u003c\/li\u003e\n\u003cli\u003eIncludes bezel and 3D-Printed bracket, for factory-style appearance\u003c\/li\u003e\n\u003cli\u003ePlug and play, no modification needed\u003c\/li\u003e\n\u003cli\u003eEngineered and Assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOverview. \u003c\/strong\u003eDiode has partnered with Foxbeam Lighting to bring you an SS3 Fog Light Kit for your Subaru Crosstrek! Featuring higher output intensity than any other 3” light on the market, the LED pods in this kit have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a durable package. With the custom 3D-printed brackets from Foxbeam, this SS3 Fog Kit has a clean, factory-style appearance, only much brighter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug and Play. \u003c\/strong\u003eThanks to 3D-printed brackets, the SS3 Fog Light Bracket Kit can be installed on your Subaru Crosstrek in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place! Wire adapters are included to connect the lights to your factory bulb sockets - no additional wiring needed!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SS3 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SS3 serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the SS3 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Compliant. \u003c\/strong\u003eAll Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"FineLine Optic\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog \u003c\/strong\u003e uses our distinctive FineLine optic design, and provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle. Choose cool white, selective yellow, or Dual-Color output to match your needs and the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_C1_Beam_Patterns_-_SAE_Fog_Standard_Description_B_1.jpg\" alt=\"SS3 Beam Patterns\" width=\"785\" height=\"272\"\u003e\u003c\/p\u003e\n\u003cp\u003eWhen installed as a pair and aimed in accordance with your state's regulations, the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eThe Stage Series 3\" LED Pod features a distinctive backlight, in a brilliant amber color. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMultiple Power Levels. \u003c\/strong\u003eStage Series LED pods are available in several power levels to suit your needs. Sport provides dependable performance and is a great entry-level upgrade. Dual-Color delivers output between Sport and Pro, with selectable white and yellow SAE fog output in a single lamp. Pro steps up the intensity for greater visibility, while Max delivers the highest output available for those seeking maximum performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS3_LED_Pod_-_Comparsion_Images_Map.jpg\" width=\"641\" height=\"171\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SS3 Sport \/ White SAE Fog","offer_id":67722818781333,"sku":"DD7988","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ Yellow SAE Fog","offer_id":67722818814101,"sku":"DD7989","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ White SAE Fog","offer_id":67722818846869,"sku":"DD7990","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ Yellow SAE Fog","offer_id":67722818879637,"sku":"DD7991","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ White SAE Fog","offer_id":67722818912405,"sku":"DD7992","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ Yellow SAE Fog","offer_id":67722818945173,"sku":"DD7993","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Dual Color \/ White\/Yellow SAE Fog\/Wide","offer_id":67722818977941,"sku":"DD8951","price":367.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/type_y_ss3_fog_light_kit_white_foxbeam_assembled_1_1.jpg?v=1792100152"},{"product_id":"tail-light-leds-for-2016-2017-subaru-crosstrek-pair","title":"Tail Light LEDs for 2016-2017 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek tail light bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7443 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eInstant Brake. \u003c\/strong\u003eThe factory incandescent tail light bulb on the Subaru Crosstrek lights up in a glow, which takes a moment to turn on. A modern LED upgrade provides instant response, which can alert other drivers on the road earlier, while also providing a modern LED appearance. This brake light LED is a great upgrade for your Crosstrek in both style and function.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Tail_Light_-_Comparision_Image.jpg\" alt=\"Tail Light Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eSince the lens on your tail light housing is red, you'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. Red is the correct emitter color for maximum brake light output on your Crosstrek.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Red","offer_id":67722973184149,"sku":"DD0108P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722973216917,"sku":"DD0112P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67722973249685,"sku":"DD0115P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0115p_7443_xp80_red_pair_titled_1_2.jpg?v=1792100365"},{"product_id":"tail-light-leds-for-2018-2023-subaru-crosstrek-pair","title":"Tail Light LEDs for 2018-2023 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek tail light bulbs\u003c\/li\u003e \u003cli\u003e16 high-power LEDs arranged on all four sides. \u003c\/li\u003e \u003cli\u003eIncreased output with LED Appearance.\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 921 bulb size\u003c\/li\u003e \u003cli\u003e320 lumens (initial output), 60 lumens (stable output).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eUpgrade. \u003c\/strong\u003eAdd more light output and a modern appearance to your Subaru Crosstrek with the 921 XPR brake light bulbs. Each of the four sides of these bulbs are populated with 4 high power LEDs for maximum brightness. Housed in an aluminum casing with a textured finish for superior heatsinking properties, the XPR will last for years to come. Best of all, installation only takes minutes - simply take out your factory bulb and the XPR will fit snugly in the socket.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAt 60 lumens, the XPR will provide significantly more output than your factory bulb. All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"921 XPR Red \/ Red","offer_id":67722974953621,"sku":"DD0395P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0395p_921_xpr_red_pair_tail_452ac20b-2dc1-43b7-ac23-79cceb98c8c3.jpg?v=1792100346"},{"product_id":"trunk-light-led-for-2016-2026-subaru-crosstrek-one","title":"Trunk Light LED for 2016-2026 Subaru Crosstrek (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek trunk light bulb\u003c\/li\u003e \u003cli\u003eIncreased output with LED appearance\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eReplacement LED bulbs are a simple way to improve the look and output of the trunk lights on your Subaru Crosstrek. Compared to the original incandescent bulbs, they will provide a brighter appearance with modern color. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Crosstrek.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_Trunk_-_FlexLight_2_1.jpg\" width=\"639\" height=\"170\" alt=\"194 Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColor Options.\u003c\/strong\u003e In addition to vibrant colors of blue, red, amber, and green, our trunk light bulbs are available in a number of white color options. These include a cool white 6000K, pure white 5000K, natural white 4000K, and warm white 3000K. Whether you want a modern cool white appearance, or a traditional warm white color with more output, we have the color to fit your needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze the exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Amber","offer_id":67723338154133,"sku":"DD0018S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Blue","offer_id":67723338186901,"sku":"DD0019S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Warm White (3000K)","offer_id":67723338219669,"sku":"DD0020S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Natural White (4000K)","offer_id":67723338252437,"sku":"DD0021S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Pure White (5000K)","offer_id":67723338285205,"sku":"DD0022S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Red","offer_id":67723338317973,"sku":"DD0023S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67723338350741,"sku":"DD0024S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Amber","offer_id":67723338383509,"sku":"DD0025S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Blue","offer_id":67723338416277,"sku":"DD0026S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67723338449045,"sku":"DD0027S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Natural White (4000K)","offer_id":67723338481813,"sku":"DD0028S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Pure White (5000K)","offer_id":67723338514581,"sku":"DD0029S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Red","offer_id":67723338547349,"sku":"DD0030S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67723338580117,"sku":"DD0031S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Warm White (3000K)","offer_id":67723338612885,"sku":"DD0192S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Cool White (6000K)","offer_id":67723338645653,"sku":"DD0193S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Red","offer_id":67723338678421,"sku":"DD0194S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Blue","offer_id":67723338711189,"sku":"DD0195S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Amber","offer_id":67723338743957,"sku":"DD0196S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Green","offer_id":67723338776725,"sku":"DD0197S","price":19.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/tnk-2997_120790.jpg?v=1792100760"},{"product_id":"vanity-light-leds-for-2019-2023-subaru-crosstrek-pair","title":"Vanity Light LEDs for 2019-2023 Subaru Crosstrek (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWarm or cool white LED, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Subaru Crosstrek vanity mirror bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 28mm Fuse bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eReplacement LED bulbs are a simple way to improve the look and styling of the vanity mirror lights on your Subaru Crosstrek. Compared to the original incandescent bulbs, they will provide a brighter appearance with modern color. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Crosstrek.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Vanity_-_Comparison_Collage.jpg\" width=\"639\" height=\"170\" alt=\"Fuse Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColor Options.\u003c\/strong\u003e In addition to vibrant colors of blue, red, amber, and green, our vanity light bulbs are available in a cool white 6000K, and warm white 3000K. If you'd like to maintain a neutral appearance for yourself or your passenger, we recommend the warm white.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze the exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Crosstrek. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Subaru or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SMF1 \/ Amber","offer_id":67723433443477,"sku":"DD0038P","price":6.36,"currency_code":"USD","in_stock":true},{"title":"SMF1 \/ Blue","offer_id":67723433476245,"sku":"DD0039P","price":6.36,"currency_code":"USD","in_stock":true},{"title":"SMF1 \/ Green","offer_id":67723433509013,"sku":"DD0040P","price":6.36,"currency_code":"USD","in_stock":true},{"title":"SMF1 \/ Warm White (3000K)","offer_id":67723433541781,"sku":"DD0041P","price":6.36,"currency_code":"USD","in_stock":true},{"title":"SMF1 \/ Red","offer_id":67723433574549,"sku":"DD0042P","price":6.36,"currency_code":"USD","in_stock":true},{"title":"SMF1 \/ Cool White (6000K)","offer_id":67723433607317,"sku":"DD0043P","price":6.36,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Amber","offer_id":67723433640085,"sku":"DD0044P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Blue","offer_id":67723433672853,"sku":"DD0045P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Green","offer_id":67723433705621,"sku":"DD0046P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Warm White (3000K)","offer_id":67723433738389,"sku":"DD0047P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Red","offer_id":67723433771157,"sku":"DD0048P","price":9.56,"currency_code":"USD","in_stock":true},{"title":"SMF2 \/ Cool White (6000K)","offer_id":67723433803925,"sku":"DD0049P","price":9.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/van-2997_120892.jpg?v=1792100873"},{"product_id":"c2-1-0-sae-dot-white-pro-led-pod-pair","title":"C2 1.0 SAE\/DOT White Pro LED Pod (pair)","description":"\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003cspan style=\"font-weight: 400\"\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003cspan style=\"font-weight: 400\"\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Spot \/ Red","offer_id":67723448516757,"sku":"DD6420P","price":339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd6408p_c2_pro_white_combo_standard_wbl_-_pro_titled.jpg?v=1792100844"},{"product_id":"c2-2-0-white-max-led-pod-pair","title":"C2 2.0 White Max LED Pod (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-compact design for tight mounting spots\u003c\/li\u003e\n\u003cli\u003ePatented TIR optics for maximum output\u003c\/li\u003e\n\u003cli\u003eUp to 95% more power than C2 1.0\u003c\/li\u003e\n\u003cli\u003eAvailable in Sport, Pro, and new 3900-lumen Max power levels\u003c\/li\u003e\n\u003cli\u003eCustomizable mounting to dial in your setup\u003c\/li\u003e\n\u003cli\u003eLink multiple pods with CrossLink technology\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eMade in USA with Global Materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eIntroducing the next generation of compact LED lighting, the Stage Series C2 2.0 LED Pod! Building on the popularity of the original C2 LED Pod, the newly redesigned C2 2.0 packs even more power, light output, and versatility into the same 2-inch footprint. With its compact design, the C2 2.0 is a go-to for tight mounting spots–roof racks, roll bars, bumpers, A-pillars, you name it. Despite its small size, the new Max option is the most powerful two-inch pod on the market at 3900 raw lumens!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRe-Engineered From the Inside Out.\u003c\/strong\u003e The C2 2.0 may look familiar, but under the hood, everything has changed. A new copper-core circuit board is bonded directly to the LED chips, dramatically improving thermal efficiency and overall performance. The powdercoated aluminum housing has also been redesigned to dissipate more heat than ever before, resulting in higher power and light output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose Your Power Level.\u003c\/strong\u003e The C2 2.0 LED pod is now available at three different power levels. All options use high-intensity, automotive-grade LED emitters, and TIR optics for unmatched focus and overall output. The Sport model offers the best bang for your buck with high-intensity LEDs, while the Pro model takes things further with a noticeable boost in total power.\u003c\/p\u003e\n\u003cp\u003eThe new Max power level uses the same Osram HX Boost LEDs found in our highest-output SS3 LED pods, delivering 3900 raw lumens. That’s serious brightness from a pod that still fits in the palm of your hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused Performance.\u003c\/strong\u003e Our patented TIR (Total Internal Reflection) optics in the C2 2.0 have been re-engineered for up to 120% more intensity and more usable light output compared to the C2 1.0. The TIR optics harness all of the light from the LED and direct it precisely where you need it, cutting glare and boosting efficiency. Each beam pattern has been fine-tuned for real-world conditions to perform even better than before.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eCombo\/Driving\u003c\/strong\u003e pattern has been completely redesigned to deliver a better blend of width and distance compared to the legacy model. The C2 2.0 Combo\/Driving optic uses advanced pillow optics to shine light downrange in a rectangular pattern of 55x20 degrees. The Combo\/Driving pattern is great for all-around use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it's also great for general illumination, providing extra width. The new C2 2.0 Driving pattern measures 20x12 degrees, providing the perfect width to fully illuminate the road ahead at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"SS5 Backlight Functionality\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog\/Wide \u003c\/strong\u003e uses our distinctive FineLine optic, which provides an exceptionally wide pattern. The SAE Fog\/Wide optic shines with a 90x10 degree pattern to fully illuminate the area directly in front of your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood\u003c\/strong\u003e pattern provides a uniform, even illumination with a broad 70x45 degree spread of light. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses advanced pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout. It is perfect to use as a backup light, for lighting up anything at low speeds, or for trailers, campsites, and work areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpot\u003c\/strong\u003e shines light directly from the unmodified TIR optic in a tight, long-distance beam, resulting in a highly focused 8-degree beam of light. The Spot pattern is perfect for directing light far into the distance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot just off road.\u003c\/strong\u003e When installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving\/Auxiliary High Beam Light, and the Fog\/Wide pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality.\u003c\/strong\u003e These C2 2.0 LED Pods include a distinctive backlight feature, available in your choice of red or amber. The backlight fully illuminates the TIR optic, providing a unique and modern look. The red backlight is ideal for those looking to match OEM taillights or boost rear visibility, while the amber backlight is a great option for forward-facing applications to match OEM markers or add extra visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustomizable Mounting.\u003c\/strong\u003e The C2 2.0 LED pod features three mounting points to adjust the pod’s height. The revised mounting bracket also allows for even more adjustment to the angle of the pod for a more dialed-in setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwappable Optics and Colors.\u003c\/strong\u003e Just like before, the lenses on the C2 are swappable. But here’s what makes the C2 2.0 even better–they now use the same high-output Cool White LED chips for both white and yellow LED pods. This means changing your optic and color is just a simple lens swap away. No need to worry about color variation when switching from yellow to white! \u003ca href=\"https:\/\/www.diodedynamics.com\/products\/led-off-road-lights\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eClick here\u003c\/span\u003e\u003c\/a\u003e to view our full lineup of replacement lenses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSnap-On Covers.\u003c\/strong\u003e Protect your investment or take the customization even further with our expanded lineup of \u003ca href=\"https:\/\/www.diodedynamics.com\/products\/led-off-road-lights\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eSnap-On Lens Covers\u003c\/span\u003e\u003c\/a\u003e! An all-new amber cover joins our existing clear, yellow, smoked, and black options. No tools required, just snap on and go.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCrossLink.\u003c\/strong\u003e The C2 2.0 LED Pod is now available with our patent-pending CrossLink technology! Our CrossLink mounting system allows you to seamlessly link together multiple pods to create your own custom lightbar configuration. \u003ca href=\"https:\/\/www.diodedynamics.com\/products\/led-off-road-lights\/off-road-accessories-wiring-lens\/brackets-mounts\/ssc2-led-pod.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eClick here\u003c\/span\u003e\u003c\/a\u003e to view our C2 2.0 CrossLink mounting solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States using globally sourced materials, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Combo\/Driving \/ Amber","offer_id":67723450318997,"sku":"DD8112P","price":383.96,"currency_code":"USD","in_stock":true},{"title":"Combo\/Driving \/ Red","offer_id":67723450351765,"sku":"DD8113P","price":383.96,"currency_code":"USD","in_stock":true},{"title":"Flood \/ Amber","offer_id":67723450384533,"sku":"DD8115P","price":383.96,"currency_code":"USD","in_stock":true},{"title":"Flood \/ Red","offer_id":67723450417301,"sku":"DD8116P","price":383.96,"currency_code":"USD","in_stock":true},{"title":"Spot \/ Amber","offer_id":67723450450069,"sku":"DD8118P","price":383.96,"currency_code":"USD","in_stock":true},{"title":"SAE Fog\/Wide \/ Amber","offer_id":67723450482837,"sku":"DD8240P","price":383.96,"currency_code":"USD","in_stock":true},{"title":"SAE\/DOT Driving \/ Amber","offer_id":67723450515605,"sku":"DD8242P","price":383.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd8113p_c2_gen2_max_white_combo_standard_rbl_pair_built_-_titled.jpg?v=1792100909"},{"product_id":"c2-2-0-white-sport-led-pod-pair","title":"C2 2.0 White Sport LED Pod (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-compact design for tight mounting spots\u003c\/li\u003e\n\u003cli\u003ePatented TIR optics for maximum output\u003c\/li\u003e\n\u003cli\u003eUp to 95% more power than C2 1.0\u003c\/li\u003e\n\u003cli\u003eAvailable in Sport, Pro, and new 3900-lumen Max power levels\u003c\/li\u003e\n\u003cli\u003eCustomizable mounting to dial in your setup\u003c\/li\u003e\n\u003cli\u003eLink multiple pods with CrossLink technology\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eMade in USA with Global Materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eIntroducing the next generation of compact LED lighting, the Stage Series C2 2.0 LED Pod! Building on the popularity of the original C2 LED Pod, the newly redesigned C2 2.0 packs even more power, light output, and versatility into the same 2-inch footprint. With its compact design, the C2 2.0 is a go-to for tight mounting spots–roof racks, roll bars, bumpers, A-pillars, you name it. Despite its small size, the new Max option is the most powerful two-inch pod on the market at 3900 raw lumens!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRe-Engineered From the Inside Out.\u003c\/strong\u003e The C2 2.0 may look familiar, but under the hood, everything has changed. A new copper-core circuit board is bonded directly to the LED chips, dramatically improving thermal efficiency and overall performance. The powdercoated aluminum housing has also been redesigned to dissipate more heat than ever before, resulting in higher power and light output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose Your Power Level.\u003c\/strong\u003e The C2 2.0 LED pod is now available at three different power levels. All options use high-intensity, automotive-grade LED emitters, and TIR optics for unmatched focus and overall output. The Sport model offers the best bang for your buck with high-intensity LEDs, while the Pro model takes things further with a noticeable boost in total power.\u003c\/p\u003e\n\u003cp\u003eThe new Max power level uses the same Osram HX Boost LEDs found in our highest-output SS3 LED pods, delivering 3900 raw lumens. That’s serious brightness from a pod that still fits in the palm of your hand.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused Performance.\u003c\/strong\u003e Our patented TIR (Total Internal Reflection) optics in the C2 2.0 have been re-engineered for up to 120% more intensity and more usable light output compared to the C2 1.0. The TIR optics harness all of the light from the LED and direct it precisely where you need it, cutting glare and boosting efficiency. Each beam pattern has been fine-tuned for real-world conditions to perform even better than before.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eCombo\/Driving\u003c\/strong\u003e pattern has been completely redesigned to deliver a better blend of width and distance compared to the legacy model. The C2 2.0 Combo\/Driving optic uses advanced pillow optics to shine light downrange in a rectangular pattern of 55x20 degrees. The Combo\/Driving pattern is great for all-around use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it's also great for general illumination, providing extra width. The new C2 2.0 Driving pattern measures 20x12 degrees, providing the perfect width to fully illuminate the road ahead at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"SS5 Backlight Functionality\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog\/Wide \u003c\/strong\u003e uses our distinctive FineLine optic, which provides an exceptionally wide pattern. The SAE Fog\/Wide optic shines with a 90x10 degree pattern to fully illuminate the area directly in front of your vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood\u003c\/strong\u003e pattern provides a uniform, even illumination with a broad 70x45 degree spread of light. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses advanced pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout. It is perfect to use as a backup light, for lighting up anything at low speeds, or for trailers, campsites, and work areas.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpot\u003c\/strong\u003e shines light directly from the unmodified TIR optic in a tight, long-distance beam, resulting in a highly focused 8-degree beam of light. The Spot pattern is perfect for directing light far into the distance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot just off road.\u003c\/strong\u003e When installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving\/Auxiliary High Beam Light, and the Fog\/Wide pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality.\u003c\/strong\u003e These C2 2.0 LED Pods include a distinctive backlight feature, available in your choice of red or amber. The backlight fully illuminates the TIR optic, providing a unique and modern look. The red backlight is ideal for those looking to match OEM taillights or boost rear visibility, while the amber backlight is a great option for forward-facing applications to match OEM markers or add extra visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustomizable Mounting.\u003c\/strong\u003e The C2 2.0 LED pod features three mounting points to adjust the pod’s height. The revised mounting bracket also allows for even more adjustment to the angle of the pod for a more dialed-in setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwappable Optics and Colors.\u003c\/strong\u003e Just like before, the lenses on the C2 are swappable. But here’s what makes the C2 2.0 even better–they now use the same high-output Cool White LED chips for both white and yellow LED pods. This means changing your optic and color is just a simple lens swap away. No need to worry about color variation when switching from yellow to white! \u003ca href=\"https:\/\/www.diodedynamics.com\/products\/led-off-road-lights\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eClick here\u003c\/span\u003e\u003c\/a\u003e to view our full lineup of replacement lenses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSnap-On Covers.\u003c\/strong\u003e Protect your investment or take the customization even further with our expanded lineup of \u003ca href=\"https:\/\/www.diodedynamics.com\/products\/led-off-road-lights\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eSnap-On Lens Covers\u003c\/span\u003e\u003c\/a\u003e! An all-new amber cover joins our existing clear, yellow, smoked, and black options. No tools required, just snap on and go.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCrossLink.\u003c\/strong\u003e The C2 2.0 LED Pod is now available with our patent-pending CrossLink technology! Our CrossLink mounting system allows you to seamlessly link together multiple pods to create your own custom lightbar configuration. \u003ca href=\"https:\/\/www.diodedynamics.com\/products\/led-off-road-lights\/off-road-accessories-wiring-lens\/brackets-mounts\/ssc2-led-pod.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eClick here\u003c\/span\u003e\u003c\/a\u003e to view our C2 2.0 CrossLink mounting solution.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States using globally sourced materials, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SAE\/DOT Driving \/ Amber","offer_id":67723452317845,"sku":"DD8088P","price":175.96,"currency_code":"USD","in_stock":true},{"title":"SAE Fog\/Wide \/ Amber","offer_id":67723452350613,"sku":"DD8090P","price":175.96,"currency_code":"USD","in_stock":true},{"title":"Combo\/Driving \/ Amber","offer_id":67723452383381,"sku":"DD8092P","price":175.96,"currency_code":"USD","in_stock":true},{"title":"Combo\/Driving \/ Red","offer_id":67723452416149,"sku":"DD8093P","price":175.96,"currency_code":"USD","in_stock":true},{"title":"Flood \/ Amber","offer_id":67723452448917,"sku":"DD8095P","price":175.96,"currency_code":"USD","in_stock":true},{"title":"Flood \/ Red","offer_id":67723452481685,"sku":"DD8096P","price":175.96,"currency_code":"USD","in_stock":true},{"title":"Spot \/ Amber","offer_id":67723452514453,"sku":"DD8098P","price":175.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd8093p_c2_gen2_sport_white_combo_standard_rbl_pair_built_-_titled.jpg?v=1792100919"},{"product_id":"hitchmount-led-pod-4-pin-reverse-kit","title":"HitchMount LED Pod 4-Pin Reverse Kit","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows you to mount an SSC1 or C1R LED pod in any 2-inch or 2.5-inch trailer hitch receiver.\u003c\/li\u003e\n\u003cli\u003eAdds a powerful reverse light, 4th brake light, and additional running light.\u003c\/li\u003e\n\u003cli\u003eSnap-fit installation, with simple wiring.\u003c\/li\u003e\n\u003cli\u003eOptional SafetyStrobe brake light strobing.\u003c\/li\u003e\n\u003cli\u003eMade in USA with Global Materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eAdd significantly more light output when backing up at night with our Stage Series HitchMount Reverse Light Kit! This kit allows you to mount one SSC1 or C1R LED pod in your 2-inch or 2.5-inch trailer hitch receiver, adding a high-power reverse light, additional running light, and an optional 4th brake light with the C1R option. With the included wiring harness, this kit connects to your vehicle's 4-pin trailer connector for simple, everyday operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrighter Backup.\u003c\/strong\u003e Factory reverse bulbs just don't provide enough light output to back up at night confidently. By pairing our patented TIR optics with high-powered LEDs, the SSC1 and C1R included in this kit provide an additional reverse light that's several times brighter than stock bulbs alone. And with a recent upgrade, the C1R LED Pod now delivers 68% more light output, providing even more output when backing up at night! Plus, it automatically comes on when the vehicle is put in reverse!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Running Light.\u003c\/strong\u003e The Stage Series LED pod included with this kit features a distinctive red backlight that operates as an additional running light during use! The backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafetyStrobe 4th Brake Light.\u003c\/strong\u003e The C1R option features a high-power red function to serve as a powerful 4th brake light, along with the low-power running light. The high-power red functionality activates anytime you apply your brakes, adding a 4th brake light to your vehicle.\u003c\/p\u003e\n\u003cp\u003eThe C1R also features optional brake light strobing. By default, the C1R will flash three times when the brake lights are applied, for greater visibility. When your parking lights are enabled, this feature will activate in 15-second intervals. The SafetyStrobe feature can be easily disabled if desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEveryday Operation.\u003c\/strong\u003e The included wiring harness plugs directly into your factory 4-pin trailer connector, and features a wire tap to power the reverse light. The kit operates as an additional red running light with your tail lights, and then automatically switches to a high-power backup light when your vehicle is in reverse. The high-power 4th brake light feature included with the C1R will activate anytime you apply your brakes. For manual override of the reverse light, a \u003ca style=\"color: #c00000\" href=\"https:\/\/www.diodedynamics.com\/reverse-light-wiring-kit-w-running-light.html\" target=\"_blank\" rel=\"noopener\"\u003euniversal backup harness\u003c\/a\u003e can be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple Installation.\u003c\/strong\u003e The patent-pending snap-fit design allows you to install this mount in minutes, without any drilling or need for a hitch pin. Simply insert the HitchMount into your trailer hitch receiver and the snap-fit side mounts will snap into place. Installation couldn't be easier!\u003c\/p\u003e\n\u003cp\u003eIf you would like to use a locking trailer pin to install this kit instead of the snap-fit pins, you can do so with a quick modification. \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.youtube.com\/watch?v=yr3GmX8EFvg\" target=\"_blank\" rel=\"noopener\"\u003eWatch the video\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in our Stage Series pods collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the Stage Series LED pods serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of our pods is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output.\u003c\/strong\u003e All Stage Series beam patterns were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood \u003c\/strong\u003e pattern was designed to provide uniform, even illumination with a full 50x50 degree spread of light on the SSC1 and C1R LED pod. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States using globally sourced materials, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"C1R + Brake","offer_id":67723464507541,"sku":"DD8762","price":125.96,"currency_code":"USD","in_stock":true},{"title":"C1","offer_id":67723464540309,"sku":"DD8765","price":83.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd7422_c1r_hitch_mount_pod_jdp3wfuact35hwc7_7_e1d7921a-7056-449f-9e95-75ba10415046.jpg?v=1792100896"},{"product_id":"hitchmount-led-pod-7-pin-reverse-kit","title":"HitchMount LED Pod 7-Pin Reverse Kit","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows you to mount an SSC1 or C1R LED pod in any 2-inch or 2.5-inch trailer hitch receiver.\u003c\/li\u003e\n\u003cli\u003eAdds a powerful reverse light, 4th brake light, and additional running light.\u003c\/li\u003e\n\u003cli\u003eSimple 5-minute installation, with no need for custom wiring or routing wires.\u003c\/li\u003e\n\u003cli\u003eOptional SafetyStrobe brake light strobing.\u003c\/li\u003e\n\u003cli\u003eDesigned and assembled in USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eAdd significantly more light output when backing up at night with our Stage Series HitchMount Reverse Light Kit! This kit allows you to mount one SSC1 or C1R LED pod in your 2-inch or 2.5-inch trailer hitch receiver, adding a high-power reverse light, additional running light, and an optional 4th brake light with the C1R option. With the included wiring harness, this kit connects to your vehicle's factory trailer hitch wiring for simple, everyday operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrighter Backup.\u003c\/strong\u003e Factory reverse bulbs just don't provide enough light output to back up at night confidently. By pairing our patented TIR optics with high-powered LEDs, the SSC1 and C1R included in this kit provide an additional reverse light that's several times brighter than stock bulbs alone. And with a recent upgrade, the C1R LED Pod now delivers 68% more light output, providing even more output when backing up at night! Plus, it automatically comes on when the vehicle is put in reverse!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Running Light.\u003c\/strong\u003e The Stage Series LED pod included with this kit features a distinctive red backlight that operates as an additional running light during use! The backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafetyStrobe 4th Brake Light.\u003c\/strong\u003e The C1R option features a high-power red function to serve as a powerful 4th brake light, along with the low-power running light. The high-power red functionality activates anytime you apply your brakes, adding a 4th brake light to your vehicle.\u003c\/p\u003e\n\u003cp\u003eThe C1R also features optional brake light strobing, which can be activated in 15-second intervals. By default, the C1R will flash three times when the brake lights are initially applied, for greater visibility. The SafetyStrobe feature can be easily disabled if desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEveryday Operation.\u003c\/strong\u003e This kit is completely plug-and-play with all 7-pin trailer connectors. The included harness plugs right into your factory trailer hitch wiring for easy installation and operation. The kit operates as an additional red running light with your tail lights, and then automatically switches to a high-power backup light when your vehicle is in reverse. The high-power 4th brake light feature included with the C1R will activate anytime you apply your brakes. If you would like to have override functionality to manually turn on the reverse light anytime, you will need to purchase the universal backup harness.\u003c\/p\u003e\n\u003cp\u003eSome newer trucks feature advanced trailer safety systems that automatically detect when a trailer is connected. To ensure compatibility, each HitchMount kit includes an optional red wire that can tap into your tail light’s brake signal, preventing trailer warnings or dashboard alerts for hassle-free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple Installation.\u003c\/strong\u003e The patent-pending snap-fit design allows you to install this mount in minutes, without any drilling or need for a hitch pin. Simply insert the HitchMount into your trailer hitch receiver and the snap-fit side mounts will snap into place. Installation couldn't be easier and takes less than five minutes!\u003c\/p\u003e\n\u003cp\u003eThis kit is ideal for anyone who uses their trailer hitch often since removal can be done in minutes as well! Simply unplug the harness, press the snap-fit pins and remove the mount. The included DT connector cover protects the harness from dirt and moisture when the HitchMount is not in use. When you're not using your hitch for towing, you can quickly reinstall the HitchMount and plug it back in.\u003c\/p\u003e\n\u003cp\u003eIf you would like to use a locking trailer pin to install this kit instead of the snap-fit pins, you can do so with a quick modification. \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.youtube.com\/watch?v=yr3GmX8EFvg\" target=\"_blank\" rel=\"noopener\"\u003eWatch the video\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e \u003cspan style=\"font-weight: 400\"\u003eTraditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in our Stage Series pods collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more:\u003c\/span\u003e \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the Stage Series LED pods serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of our pods is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output.\u003c\/strong\u003e All Stage Series beam patterns were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood \u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003epattern was designed to provide uniform, even illumination with a full 50x50 degree spread of light on the SSC1 and C1R LED pod. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"C1","offer_id":67723465228437,"sku":"DD7420","price":97.96,"currency_code":"USD","in_stock":true},{"title":"C1R + Brake","offer_id":67723465261205,"sku":"DD7422","price":139.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd7422_c1r_hitch_mount_pod_jdp3wfuact35hwc7_89fcd2b0-7300-4d91-b252-386817b31246.jpg?v=1792100899"},{"product_id":"rgbw-multicolor-engine-bay-led-kit","title":"RGBW Multicolor Engine Bay LED Kit","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdds RGBW color-changing ability to your engine bay area.\u003c\/li\u003e \u003cli\u003eHighly flexible, waterproof LED strips.\u003c\/li\u003e \u003cli\u003eHigh-density LEDs for brighter output.\u003c\/li\u003e \u003cli\u003eBarrel-style M8 connectors, for secure connection. \u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/RGBW_RGB_Strip_White_Comparison_Label_2.jpg\" width=\"45%\" height=\"225\"\u003e \u003cp\u003e\u003cstrong\u003eMulticolor. \u003c\/strong\u003eAdd RGBW color-changing ability to your vehicle with our Multicolor Engine Bay LED Strip Kit! This product is not just RGB, it is RGBW! That means there is an extra integrated LED chip that is specifically white in color, right next to the standard red, green, and blue LEDs. By using an RGBW controller, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals. With our multicolor LED strips installed, the possibilities are endless!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eControl. \u003c\/strong\u003eOur \u003ca href=\"https:\/\/www.diodedynamics.com\/rgbw-bluetooth-controller.html\"\u003eBluetooth Controller\u003c\/a\u003e will allow you to choose any color under the sun, including True White, directly from your phone! Our mobile app includes a wide variety of features including strobe and fade effects, preset colors, Camera Match, Music Sync, and much more. Our controller will also allow you to adjust the brightness of the LED strips. Any time you power up your strips, they will default to the last color that was previously selected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut to size.\u003c\/strong\u003e These LED strips are flexible, IP67 weatherproof SMD-type LED strips, with 3 SMDs per 5 cm. They are cuttable every 3 chips, to size to your need, and come with 3M adhesive backing. Due to the weatherproofing, cut portions cannot be reattached without manual soldering, which removes the weatherproofing properties. Weatherproofing can be reapplied through waterproofing products.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation. \u003c\/strong\u003eThis kit includes everything you need to install LED Strips in the engine bay of your vehicle. You can install the kit using either the included door pin switch or toggle switch. This kit is very universal in nature, and can be tapped into any 12V power source that you would like when installing. You will want to tap into any wire that is acting as a ground, or you can go to a chassis ground!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"2 Strips","offer_id":67723468669077,"sku":"DD0440","price":47.96,"currency_code":"USD","in_stock":true},{"title":"4 Strips","offer_id":67723468701845,"sku":"DD0444","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2015_chevy_camaro_rgbw_engine_wide_green_1.jpg?v=1792100897"},{"product_id":"rgbw-multicolor-grille-led-kit","title":"RGBW Multicolor Grille LED Kit","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdds RGBW color-changing ability to your grille area.\u003c\/li\u003e \u003cli\u003eHighly flexible, waterproof LED strips.\u003c\/li\u003e \u003cli\u003eHigh-density LEDs for brighter output.\u003c\/li\u003e \u003cli\u003eBarrel-style M8 connectors, for secure connection. \u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/RGBW_RGB_Strip_White_Comparison_Label_2.jpg\" width=\"45%\" height=\"225\"\u003e \u003cp\u003e\u003cstrong\u003eMulticolor. \u003c\/strong\u003eAdd RGBW color-changing ability to your vehicle with our Multicolor Grille LED Strip Kit! This product is not just RGB, it is RGBW! That means there is an extra integrated LED chip that is specifically white in color, right next to the standard red, green, and blue LEDs. By using an RGBW controller, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals. With our multicolor LED strips installed, the possibilities are endless!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eControl. \u003c\/strong\u003eOur \u003ca href=\"https:\/\/www.diodedynamics.com\/rgbw-bluetooth-controller.html\"\u003eBluetooth Controller\u003c\/a\u003e will allow you to choose any color under the sun, including True White, directly from your phone! Our mobile app includes a wide variety of features including strobe and fade effects, preset colors, Camera Match, Music Sync, and much more. Our controller will also allow you to adjust the brightness of the LED strips. Any time you power up your strips, they will default to the last color that was previously selected. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut to size.\u003c\/strong\u003e These LED strips are flexible, IP67 weatherproof SMD-type LED strips, with 3 SMDs per 5 cm. They are cuttable every 3 chips, to size to your need, and come with 3M adhesive backing. Due to the weatherproofing, cut portions cannot be reattached without manual soldering, which removes the weatherproofing properties. Weatherproofing can be reapplied through waterproofing products.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation. \u003c\/strong\u003eThis kit includes everything you need to install LED Strips in the grille area of your vehicle. This kit is very universal in nature, and can be tapped into any 12V power source that you would like when installing.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"2 Strips","offer_id":67723470962837,"sku":"DD0441","price":47.96,"currency_code":"USD","in_stock":true},{"title":"4 Strips","offer_id":67723470995605,"sku":"DD0445","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/18_jeep_grand_cherokee_trackhawk_grille_kit_blue_1.jpg?v=1792100896"},{"product_id":"rgbw-multicolor-footwell-led-kit","title":"RGBW Multicolor Footwell LED Kit","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdds RGBW color-changing ability to your footwell area.\u003c\/li\u003e \u003cli\u003eHighly flexible, waterproof LED strips.\u003c\/li\u003e \u003cli\u003eHigh-density LEDs for brighter output.\u003c\/li\u003e \u003cli\u003eBarrel-style M8 connectors, for secure connection. \u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/RGBW_RGB_Strip_White_Comparison_Label_2.jpg\" width=\"45%\" height=\"225\"\u003e \u003cp\u003e\u003cstrong\u003eMulticolor. \u003c\/strong\u003eAdd RGBW color-changing ability to your vehicle with our Multicolor Footwell LED Strip Kit! This product is not just RGB, it is RGBW! That means there is an extra integrated LED chip that is specifically white in color, right next to the standard red, green, and blue LEDs. By using an RGBW controller, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals. With our multicolor LED strips installed, the possibilities are endless!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eControl. \u003c\/strong\u003eOur \u003ca href=\"https:\/\/www.diodedynamics.com\/rgbw-bluetooth-controller.html\"\u003eBluetooth Controller\u003c\/a\u003e will allow you to choose any color under the sun, including True White, directly from your phone! Our mobile app includes a wide variety of features including strobe and fade effects, preset colors, Camera Match, Music Sync, and much more. Our controller will also allow you to adjust the brightness of the LED strips. Any time you power up your strips, they will default to the last color that was previously selected. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCut to size.\u003c\/strong\u003e These LED strips are flexible, IP67 weatherproof SMD-type LED strips, with 3 SMDs per 5 cm. They are cuttable every 3 chips, to size to your need, and come with 3M adhesive backing. Due to the weatherproofing, cut portions cannot be reattached without manual soldering, which removes the weatherproofing properties. Weatherproofing can be reapplied through waterproofing products.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInstallation. \u003c\/strong\u003eThe 2-piece kit includes everything you need to install LED strips in the front footwell area on both the driver and passenger side of your vehicle. The 4-piece kit includes everything you need to install LED strips in the front and rear footwell areas on both the driver and passenger side of your vehicle. This kit is very universal in nature, and can be tapped into any 12V power source that you would like when installing.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"4 Strips","offer_id":67723471224981,"sku":"DD0443","price":79.96,"currency_code":"USD","in_stock":true},{"title":"2 Strips","offer_id":68011571085461,"sku":"DD0438","price":47.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2015_chevy_camaro_rgbw_footwell_close_purple.jpg?v=1792100891"},{"product_id":"ss3-white-max-led-pod-pair","title":"SS3 White Max LED Pod (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModern TIR optics provide highest intensity on the market\u003c\/li\u003e\n\u003cli\u003eBacklight accent feature, available in amber or red\u003c\/li\u003e\n\u003cli\u003eAvailable in SAE Driving, SAE Fog, Flood, Combo\/Driving, or Spot beam patterns\u003c\/li\u003e\n\u003cli\u003eDurable powdercoated aluminum construction\u003c\/li\u003e\n\u003cli\u003eIntegrated Deutsch-style connector\u003c\/li\u003e\n\u003cli\u003eMade in USA with global materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eIntroducing the SS3 3” LED Pod! Featuring higher output intensity than any other 3” light on the market, these LED pods have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a durable package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics, like reflectors or simple lenses, lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SS3 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SS3 serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the SS3 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Patterns.\u003c\/strong\u003e All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! Click here to learn more: \u003ca href=\"https:\/\/youtu.be\/xrFc7aHfOxc\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eBeam Pattern Overview Video\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it’s great for general illumination as well. Rather than a traditional \"spot\" pattern, the Stage Series SAE Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"SS5 Backlight Functionality\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog \u003c\/strong\u003e uses our distinctive FineLine optic design, and provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle. Choose your output color of cool white or yellow, which is often said to help cut through inclement weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood\u003c\/strong\u003e pattern was designed to provide uniform, even illumination with a full 60x60 degree spread of light. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout. It is perfect to use as a backup light, for lighting up anything at low speeds, or for trailers and worksites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCombo\/Driving\u003c\/strong\u003e provides a balanced beam pattern with strong forward illumination and a wide field of view. It shines in a smooth 80x30 degree spread, making it an excellent all-around option for a variety of speeds and terrain. Unlike other combo lights on the market that produce a distracting hotspot on rough terrain, the Combo\/Driving optic produces a smooth, evenly blended pattern for a more comfortable driving experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpot\u003c\/strong\u003e is an unmodified pattern, shining light directly from the TIR optic. The result is a highly focused 6-degree beam of light, perfect for directing light far into the distance. With an incredible output of 151,000 candela, the SS3 Sport shines a half-mile away (¼ lux), from a compact 3-inch package. \u003cstrong\u003eNOTE:\u003c\/strong\u003e The Pro Spot uses a slightly larger emitter, which spreads the light output more than the Sport Spot, resulting in a lower candela and lux rating even at a higher power level.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Updated_SS3_LED_Pod_Beam_Patterns_-_Description_B.jpg\" alt=\"SS3 Beam Patterns\" width=\"785\" height=\"272\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot just off road.\u003c\/strong\u003e When installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving\/Auxiliary High Beam Light, and the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. For states that require them, we also offer \u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"color: #c00000\"\u003esnap-on covers\u003c\/span\u003e\u003c\/a\u003e for your SS3 Pod. These covers are available in a variety of colors and keep your SS3 Pod clean and protected from dirt, dust, or whatever else the road throws your way! Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow.\u003c\/strong\u003e All Stage Series LED pods are available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output that matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. The SS3 Yellow LED Pod can be found \u003ca href=\"https:\/\/www.diodedynamics.com\/ss3-sae-yellow-pro-led-pod-pair.html\" target=\"_self\"\u003e\u003cspan style=\"color: #c00000\"\u003ehere\u003c\/span\u003e\u003c\/a\u003e. We also offer \u003ca href=\"https:\/\/www.diodedynamics.com\/products\/led-off-road-lights\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003ereplacement lenses\u003c\/span\u003e\u003c\/a\u003e that allow you to change the color or optic of your SS3 Pods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSport, Pro, or Max.\u003c\/strong\u003e Stage Series LED pods are available at three different power levels. All options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output. The Sport model uses high-intensity LEDs and is the best bang for the buck you’ll find. The Pro model steps things up in a big way, with double the total power. Finally, the Max model is designed with cutting-edge automotive emitters, for both high power and extreme intensity. This brand new technology comes at a cost, but if you’re looking for the absolute best in lighting performance, the SS3 Max is the answer. Click the Specifications tab to see more information or click \u003ca href=\"http:\/\/images.diodedynamics.com\/docs\/install\/universal\/stage_series\/Stage_Series_3in_Worklight_Pod_Info_Guide.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003ehere\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eThe SS3 LED Pod features a distinctive backlight, in your choice of amber or red. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple connections.\u003c\/strong\u003e All SS3 LED pods feature a custom-molded DT-type Deutsch-style connector on the back and include a 6-inch pigtail with bare leads. For installation, you can wire yourself, use an off-the-shelf Deutsch DT-sized wire harness, or select an optional Diode Dynamics wire harness. Our \u003ca href=\"https:\/\/www.diodedynamics.com\/light-duty-dual-output-4-pin-wiring-harness.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eLight Duty Dual Output Harness\u003c\/span\u003e\u003c\/a\u003e can be used to power up to two SS3 pods. If you are looking to power more than two SS3 pods, we recommend using our \u003ca href=\"https:\/\/www.diodedynamics.com\/heavy-duty-dual-output-4-pin-wiring-harness.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eHeavy Duty Dual Output Harness\u003c\/span\u003e\u003c\/a\u003e along with a Deutsch DT Splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SAE Driving \/ Amber","offer_id":67723483545749,"sku":"DD6895P","price":479.96,"currency_code":"USD","in_stock":true},{"title":"SAE Fog \/ Amber","offer_id":67723483578517,"sku":"DD6897P","price":479.96,"currency_code":"USD","in_stock":true},{"title":"Flood \/ Amber","offer_id":67723483611285,"sku":"DD6899P","price":479.96,"currency_code":"USD","in_stock":true},{"title":"Flood \/ Red","offer_id":67723483644053,"sku":"DD6900P","price":479.96,"currency_code":"USD","in_stock":true},{"title":"Spot \/ Amber","offer_id":67723483676821,"sku":"DD6903P","price":479.96,"currency_code":"USD","in_stock":true},{"title":"Combo\/Driving \/ Amber","offer_id":67723483709589,"sku":"DD6907P","price":479.96,"currency_code":"USD","in_stock":true},{"title":"Combo\/Driving \/ Red","offer_id":67723483742357,"sku":"DD6908P","price":479.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd6487p_ss3_max_driving_white_pair_-_max_titled.jpg?v=1792100962"},{"product_id":"ss3-white-pro-led-pod-pair","title":"SS3 White Pro LED Pod (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModern TIR optics provide highest intensity on the market\u003c\/li\u003e\n\u003cli\u003eBacklight accent feature, available in amber or red\u003c\/li\u003e\n\u003cli\u003eAvailable in SAE Driving, SAE Fog, Flood, Combo\/Driving, or Spot beam patterns\u003c\/li\u003e\n\u003cli\u003eDurable powdercoated aluminum construction\u003c\/li\u003e\n\u003cli\u003eIntegrated Deutsch-style connector\u003c\/li\u003e\n\u003cli\u003eMade in USA with global materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eIntroducing the SS3 3” LED Pod! Featuring higher output intensity than any other 3” light on the market, these LED pods have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a durable package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics, like reflectors or simple lenses, lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SS3 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SS3 serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the SS3 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Patterns.\u003c\/strong\u003e All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! Click here to learn more: \u003ca href=\"https:\/\/youtu.be\/xrFc7aHfOxc\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eBeam Pattern Overview Video\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it’s great for general illumination as well. Rather than a traditional \"spot\" pattern, the Stage Series SAE Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"SS5 Backlight Functionality\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog \u003c\/strong\u003e uses our distinctive FineLine optic design, and provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle. Choose your output color of cool white or yellow, which is often said to help cut through inclement weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood\u003c\/strong\u003e pattern was designed to provide uniform, even illumination with a full 60x60 degree spread of light. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout. It is perfect to use as a backup light, for lighting up anything at low speeds, or for trailers and worksites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCombo\/Driving\u003c\/strong\u003e provides a balanced beam pattern with strong forward illumination and a wide field of view. It shines in a smooth 80x30 degree spread, making it an excellent all-around option for a variety of speeds and terrain. Unlike other combo lights on the market that produce a distracting hotspot on rough terrain, the Combo\/Driving optic produces a smooth, evenly blended pattern for a more comfortable driving experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpot\u003c\/strong\u003e is an unmodified pattern, shining light directly from the TIR optic. The result is a highly focused 6-degree beam of light, perfect for directing light far into the distance. With an incredible output of 151,000 candela, the SS3 Sport shines a half-mile away (¼ lux), from a compact 3-inch package. \u003cstrong\u003eNOTE:\u003c\/strong\u003e The Pro Spot uses a slightly larger emitter, which spreads the light output more than the Sport Spot, resulting in a lower candela and lux rating even at a higher power level.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Updated_SS3_LED_Pod_Beam_Patterns_-_Description_B.jpg\" alt=\"SS3 Beam Patterns\" width=\"785\" height=\"272\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot just off road.\u003c\/strong\u003e When installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving\/Auxiliary High Beam Light, and the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. For states that require them, we also offer \u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"color: #c00000\"\u003esnap-on covers\u003c\/span\u003e\u003c\/a\u003e for your SS3 Pod. These covers are available in a variety of colors and keep your SS3 Pod clean and protected from dirt, dust, or whatever else the road throws your way! Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow.\u003c\/strong\u003e All Stage Series LED pods are available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output that matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. The SS3 Yellow LED Pod can be found \u003ca href=\"https:\/\/www.diodedynamics.com\/ss3-sae-yellow-pro-led-pod-pair.html\" target=\"_self\"\u003e\u003cspan style=\"color: #c00000\"\u003ehere\u003c\/span\u003e\u003c\/a\u003e. We also offer \u003ca href=\"https:\/\/www.diodedynamics.com\/products\/led-off-road-lights\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003ereplacement lenses\u003c\/span\u003e\u003c\/a\u003e that allow you to change the color or optic of your SS3 Pods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSport, Pro, or Max.\u003c\/strong\u003e Stage Series LED pods are available at three different power levels. All options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output. The Sport model uses high-intensity LEDs and is the best bang for the buck you’ll find. The Pro model steps things up in a big way, with double the total power. Finally, the Max model is designed with cutting-edge automotive emitters, for both high power and extreme intensity. This brand new technology comes at a cost, but if you’re looking for the absolute best in lighting performance, the SS3 Max is the answer. Click the Specifications tab to see more information or click \u003ca href=\"http:\/\/images.diodedynamics.com\/docs\/install\/universal\/stage_series\/Stage_Series_3in_Worklight_Pod_Info_Guide.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003ehere\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eThe SS3 LED Pod features a distinctive backlight, in your choice of amber or red. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple connections.\u003c\/strong\u003e All SS3 LED pods feature a custom-molded DT-type Deutsch-style connector on the back and include a 6-inch pigtail with bare leads. For installation, you can wire yourself, use an off-the-shelf Deutsch DT-sized wire harness, or select an optional Diode Dynamics wire harness. Our \u003ca href=\"https:\/\/www.diodedynamics.com\/light-duty-dual-output-4-pin-wiring-harness.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eLight Duty Dual Output Harness\u003c\/span\u003e\u003c\/a\u003e can be used to power up to two SS3 pods. If you are looking to power more than two SS3 pods, we recommend using our \u003ca href=\"https:\/\/www.diodedynamics.com\/heavy-duty-dual-output-4-pin-wiring-harness.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eHeavy Duty Dual Output Harness\u003c\/span\u003e\u003c\/a\u003e along with a Deutsch DT Splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SAE Driving \/ Amber","offer_id":67723483971733,"sku":"DD6874P","price":319.96,"currency_code":"USD","in_stock":true},{"title":"SAE Fog \/ Amber","offer_id":67723484004501,"sku":"DD6876P","price":319.96,"currency_code":"USD","in_stock":true},{"title":"Flood \/ Amber","offer_id":67723484037269,"sku":"DD6878P","price":319.96,"currency_code":"USD","in_stock":true},{"title":"Flood \/ Red","offer_id":67723484070037,"sku":"DD6879P","price":319.96,"currency_code":"USD","in_stock":true},{"title":"Spot \/ Amber","offer_id":67723484102805,"sku":"DD6882P","price":319.96,"currency_code":"USD","in_stock":true},{"title":"Combo\/Driving \/ Amber","offer_id":67723484135573,"sku":"DD6886P","price":319.96,"currency_code":"USD","in_stock":true},{"title":"Combo\/Driving \/ Red","offer_id":67723484168341,"sku":"DD6887P","price":319.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd6128p_ss3_pro_driving_white_pair_-_pro_titled.jpg?v=1792100956"},{"product_id":"ss3-white-sport-led-pod-pair","title":"SS3 White Sport LED Pod (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModern TIR optics provide highest intensity on the market\u003c\/li\u003e\n\u003cli\u003eBacklight accent feature, available in amber or red\u003c\/li\u003e\n\u003cli\u003eAvailable in SAE Driving, SAE Fog, Flood, Combo\/Driving, or Spot beam patterns\u003c\/li\u003e\n\u003cli\u003eDurable powdercoated aluminum construction\u003c\/li\u003e\n\u003cli\u003eIntegrated Deutsch-style connector\u003c\/li\u003e\n\u003cli\u003eMade in USA with global materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eIntroducing the SS3 3” LED Pod! Featuring higher output intensity than any other 3” light on the market, these LED pods have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a durable package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics, like reflectors or simple lenses, lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SS3 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SS3 serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the SS3 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Patterns.\u003c\/strong\u003e All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! Click here to learn more: \u003ca href=\"https:\/\/youtu.be\/xrFc7aHfOxc\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eBeam Pattern Overview Video\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it’s great for general illumination as well. Rather than a traditional \"spot\" pattern, the Stage Series SAE Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"SS5 Backlight Functionality\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog \u003c\/strong\u003e uses our distinctive FineLine optic design, and provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle. Choose your output color of cool white or yellow, which is often said to help cut through inclement weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood\u003c\/strong\u003e pattern was designed to provide uniform, even illumination with a full 60x60 degree spread of light. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout. It is perfect to use as a backup light, for lighting up anything at low speeds, or for trailers and worksites.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCombo\/Driving\u003c\/strong\u003e provides a balanced beam pattern with strong forward illumination and a wide field of view. It shines in a smooth 80x30 degree spread, making it an excellent all-around option for a variety of speeds and terrain. Unlike other combo lights on the market that produce a distracting hotspot on rough terrain, the Combo\/Driving optic produces a smooth, evenly blended pattern for a more comfortable driving experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpot\u003c\/strong\u003e is an unmodified pattern, shining light directly from the TIR optic. The result is a highly focused 6-degree beam of light, perfect for directing light far into the distance. With an incredible output of 151,000 candela, the SS3 Sport shines a half-mile away (¼ lux), from a compact 3-inch package. \u003cstrong\u003eNOTE:\u003c\/strong\u003e The Pro Spot uses a slightly larger emitter, which spreads the light output more than the Sport Spot, resulting in a lower candela and lux rating even at a higher power level.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Updated_SS3_LED_Pod_Beam_Patterns_-_Description_B.jpg\" alt=\"SS3 Beam Patterns\" width=\"785\" height=\"272\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot just off road.\u003c\/strong\u003e When installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving\/Auxiliary High Beam Light, and the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. For states that require them, we also offer \u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"color: #c00000\"\u003esnap-on covers\u003c\/span\u003e\u003c\/a\u003e for your SS3 Pod. These covers are available in a variety of colors and keep your SS3 Pod clean and protected from dirt, dust, or whatever else the road throws your way! Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow.\u003c\/strong\u003e All Stage Series LED pods are available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output that matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. The SS3 Yellow LED Pod can be found \u003ca href=\"https:\/\/www.diodedynamics.com\/ss3-sae-yellow-pro-led-pod-pair.html\" target=\"_self\"\u003e\u003cspan style=\"color: #c00000\"\u003ehere\u003c\/span\u003e\u003c\/a\u003e. We also offer \u003ca href=\"https:\/\/www.diodedynamics.com\/products\/led-off-road-lights\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003ereplacement lenses\u003c\/span\u003e\u003c\/a\u003e that allow you to change the color or optic of your SS3 Pods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSport, Pro, or Max.\u003c\/strong\u003e Stage Series LED pods are available at three different power levels. All options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output. The Sport model uses high-intensity LEDs and is the best bang for the buck you’ll find. The Pro model steps things up in a big way, with double the total power. Finally, the Max model is designed with cutting-edge automotive emitters, for both high power and extreme intensity. This brand new technology comes at a cost, but if you’re looking for the absolute best in lighting performance, the SS3 Max is the answer. Click the Specifications tab to see more information or click \u003ca href=\"http:\/\/images.diodedynamics.com\/docs\/install\/universal\/stage_series\/Stage_Series_3in_Worklight_Pod_Info_Guide.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003ehere\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eThe SS3 LED Pod features a distinctive backlight, in your choice of amber or red. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple connections.\u003c\/strong\u003e All SS3 LED pods feature a custom-molded DT-type Deutsch-style connector on the back and include a 6-inch pigtail with bare leads. For installation, you can wire yourself, use an off-the-shelf Deutsch DT-sized wire harness, or select an optional Diode Dynamics wire harness. Our \u003ca href=\"https:\/\/www.diodedynamics.com\/light-duty-dual-output-4-pin-wiring-harness.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eLight Duty Dual Output Harness\u003c\/span\u003e\u003c\/a\u003e can be used to power up to two SS3 pods. If you are looking to power more than two SS3 pods, we recommend using our \u003ca href=\"https:\/\/www.diodedynamics.com\/heavy-duty-dual-output-4-pin-wiring-harness.html\"\u003e\u003cspan style=\"color: #c00000\"\u003eHeavy Duty Dual Output Harness\u003c\/span\u003e\u003c\/a\u003e along with a Deutsch DT Splitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SAE Driving \/ Amber","offer_id":67723486920853,"sku":"DD6853P","price":223.96,"currency_code":"USD","in_stock":true},{"title":"SAE Fog \/ Amber","offer_id":67723486953621,"sku":"DD6855P","price":223.96,"currency_code":"USD","in_stock":true},{"title":"Flood \/ Amber","offer_id":67723486986389,"sku":"DD6857P","price":223.96,"currency_code":"USD","in_stock":true},{"title":"Flood \/ Red","offer_id":67723487019157,"sku":"DD6858P","price":223.96,"currency_code":"USD","in_stock":true},{"title":"Spot \/ Amber","offer_id":67723487051925,"sku":"DD6861P","price":223.96,"currency_code":"USD","in_stock":true},{"title":"Combo\/Driving \/ Amber","offer_id":67723487084693,"sku":"DD6865P","price":223.96,"currency_code":"USD","in_stock":true},{"title":"Combo\/Driving \/ Red","offer_id":67723487117461,"sku":"DD6866P","price":223.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd6120p_ss3_sport_driving_white_pair_-_sport_titled.jpg?v=1792100969"},{"product_id":"ss5-crosslink-4-pod-25-inch-led-light-bar-one","title":"SS5 CrossLink 4-Pod 25-inch LED Light Bar (one)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\n\u003cspan style=\"font-weight: 400\"\u003eFour\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e-pod 25-inch \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003elinked lightbar\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eEngineered TIR (total internal reflection) optics\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSelectable backlight color, with eight color options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eTorture-tested, heavy-duty construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eUltra-high intensity: shines almost mile away\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eAssembled in USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eIntroducing the SS5 CrossLink Lightbar! Using our patent-pending CrossLink technology, this kit links \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003efour \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eSS5 LED pods together into a single lightbar. Featuring the highest output intensity of any 5-inch LED pod on the market, the LED pods included in this kit have been designed for maximum functionality, with patented technology and custom-engineered TIR optics, all in a durable package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SS5 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more:\u003c\/span\u003e \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SS5 serves as both the optic and main lens for greater efficiency and light output. Thanks to this patented and innovative technology, when coupled with high-intensity LED chips, the total intensity of the SS5 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES_B.gif\" alt=\"SS5 Backlight Functionality\" width=\"30%\" height=\"100\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cstrong\u003eSelectable Backlight.\u003c\/strong\u003e The Stage Series 5\" LED Pods included in this kit feature a selectable backlight with eight different color options, perfect for an extra styling accent, or for more visibility when you’re not using the main beam. Selecting your backlight color is easy - simply alternate the power on and off. There’s no complicated programming with a controller! The SS5's backlight fully illuminates the TIR optic, providing unique accent lighting that you won't find on other LED pods. \u003cstrong\u003eNOTE:\u003c\/strong\u003e Due to the yellow lens, the Yellow kit is only available with an Amber backlight color.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES2.gif\" alt=\"SS5 Backlight Functionality\" width=\"100%\" height=\"267\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cstrong\u003eCrossLink.\u003c\/strong\u003e Our patent-pending CrossLink technology allows you to link up to eight SS5 pods together to create your own lightbar. Unlike other options on the market that use multiple pieces to link pods together, we have designed a single-piece CNC aluminum link. This provides extreme rigidity, but is fully adjustable, for both straight and curved configurations. And thanks to inset threaded mounts built-in to every SS5, there is no need to buy a special linking version of the SS5 for your setup. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Patterns.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series beam pattern options were designed with advanced optical simulation modeling, to shape the output in highly-functional beam patterns with high efficiency. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDriving\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e is great for general illumination at speed. Rather than a traditional \"spot\" pattern, the Stage Series Driving pattern shines in a 30x20 degree spread, providing just enough width to fully illuminate the road ahead at high speeds, but still staying focused to avoid too much foreground light. Although the SS5 Driving is too bright to be considered an SAE Auxiliary High Beam, it is perfect for an extra boost of light at speed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCombo \u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003epattern combines both the Driving and Flood optics, perfect for all-around use. It shines light downrange in a focused 30x20 Driving beam to punch with distance, and fills in the surrounding area to create a full 70x30 degree pattern. With a row of driving optics in the middle, and a flood optic on the top and bottom, this has been designed to provide extra light for every situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_5_Beam_Patterns_-_Description_Combo_Driving.jpg\" alt=\"\" width=\"785\" height=\"272\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output, and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. We also offer \u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003ereplacement lenses\u003c\/span\u003e\u003c\/a\u003e that allow you to change the color or optic of your SS5 Pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterchangeable Lens.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Need a different beam pattern or color? You can swap it yourself! We offer replacement lenses that allow you to change the color or optic of your Stage Series SS5 Pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSport or Pro.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available at two different power levels. All options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output. The Sport model uses nine high-intensity LEDs for 40W of total power. The Pro model steps things up in a big way, with double the total power at 90W. Click the Specifications tab to see more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cstrong\u003eSimple connections.\u003c\/strong\u003e All SS5 LED pods feature a custom-molded DT type Deutsch-style connector on the back. DT splitters are included in the kit to connect the pods together, along with a 6-inch pigtail with bare leads. For installation, you can wire yourself, use an off-the-shelf Deutsch DT sized wire harness, or select the optional Diode Dynamics wire harness. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSnap-on covers.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e For states that require them, we also offer \u003c\/span\u003e\u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cspan style=\"color: #c00000\"\u003esnap-on covers\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400\"\u003e for your SS5 Pod. These covers are available in a variety of colors and keep your SS5 Pod clean and protected from dirt, dust, or whatever else the road throws your way! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/span\u003e\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SS5 Sport \/ White Combo","offer_id":67723489542293,"sku":"DD6794","price":799.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Yellow Combo","offer_id":67723489575061,"sku":"DD6795","price":799.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ White Driving","offer_id":67723489607829,"sku":"DD7206","price":799.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Yellow Driving","offer_id":67723489640597,"sku":"DD7207","price":799.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ White Combo","offer_id":67723489673365,"sku":"DD7240","price":1279.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ Yellow Combo","offer_id":67723489706133,"sku":"DD7241","price":1279.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ White Driving","offer_id":67723489738901,"sku":"DD7252","price":1279.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ Yellow Driving","offer_id":67723489771669,"sku":"DD7253","price":1279.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd6794_ss5_lightbar_white_combo_4_crosslink_assembled.jpg?v=1792100985"},{"product_id":"ss5-crosslink-8-pod-50-inch-led-light-bar-one","title":"SS5 CrossLink 8-Pod 50-inch LED Light Bar (one)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\n\u003cspan style=\"font-weight: 400\"\u003eEight\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e-pod 50-inch \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003elinked lightbar\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eEngineered TIR (total internal reflection) optics\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSelectable backlight color, with eight color options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eTorture-tested, heavy-duty construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eUltra-high intensity: shines almost mile away\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eAssembled in USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eIntroducing the SS5 CrossLink Lightbar! Using our patent-pending CrossLink technology, this kit links \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eeight \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eSS5 LED pods together into a single lightbar. Featuring the highest output intensity of any 5-inch LED pod on the market, the LED pods included in this kit have been designed for maximum functionality, with patented technology and custom-engineered TIR optics, all in a durable package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SS5 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more:\u003c\/span\u003e \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SS5 serves as both the optic and main lens for greater efficiency and light output. Thanks to this patented and innovative technology, when coupled with high-intensity LED chips, the total intensity of the SS5 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES_B.gif\" alt=\"SS5 Backlight Functionality\" width=\"30%\" height=\"100\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cstrong\u003eSelectable Backlight.\u003c\/strong\u003e The Stage Series 5\" LED Pods included in this kit feature a selectable backlight with eight different color options, perfect for an extra styling accent, or for more visibility when you’re not using the main beam. Selecting your backlight color is easy - simply alternate the power on and off. There’s no complicated programming with a controller! The SS5's backlight fully illuminates the TIR optic, providing unique accent lighting that you won't find on other LED pods. \u003cstrong\u003eNOTE:\u003c\/strong\u003e Due to the yellow lens, the Yellow kit is only available with an Amber backlight color.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES2.gif\" alt=\"SS5 Backlight Functionality\" width=\"100%\" height=\"267\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cstrong\u003eCrossLink.\u003c\/strong\u003e Our patent-pending CrossLink technology allows you to link up to eight SS5 pods together to create your own lightbar. Unlike other options on the market that use multiple pieces to link pods together, we have designed a single-piece CNC aluminum link. This provides extreme rigidity, but is fully adjustable, for both straight and curved configurations. And thanks to inset threaded mounts built-in to every SS5, there is no need to buy a special linking version of the SS5 for your setup. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Patterns.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series beam pattern options were designed with advanced optical simulation modeling, to shape the output in highly-functional beam patterns with high efficiency. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDriving\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e is great for general illumination at speed. Rather than a traditional \"spot\" pattern, the Stage Series Driving pattern shines in a 30x20 degree spread, providing just enough width to fully illuminate the road ahead at high speeds, but still staying focused to avoid too much foreground light. Although the SS5 Driving is too bright to be considered an SAE Auxiliary High Beam, it is perfect for an extra boost of light at speed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCombo \u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003epattern combines both the Driving and Flood optics, perfect for all-around use. It shines light downrange in a focused 30x20 Driving beam to punch with distance, and fills in the surrounding area to create a full 70x30 degree pattern. With a row of driving optics in the middle, and a flood optic on the top and bottom, this has been designed to provide extra light for every situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_5_Beam_Patterns_-_Description_Combo_Driving.jpg\" alt=\"\" width=\"785\" height=\"272\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output, and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. We also offer \u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003ereplacement lenses\u003c\/span\u003e\u003c\/a\u003e that allow you to change the color or optic of your SS5 Pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterchangeable Lens.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Need a different beam pattern or color? You can swap it yourself! We offer replacement lenses that allow you to change the color or optic of your Stage Series SS5 Pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cstrong\u003eSimple connections.\u003c\/strong\u003e All SS5 LED pods feature a custom-molded DT type Deutsch-style connector on the back. A DT wiring harness is included in the kit to connect the pods together, along with a 6-inch pigtail with bare leads. For installation, you can wire yourself, use an off-the-shelf Deutsch DT sized wire harness, or select the optional Diode Dynamics wire harness.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSnap-on covers.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e For states that require them, we also offer \u003c\/span\u003e\u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cspan style=\"color: #c00000\"\u003esnap-on covers\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400\"\u003e for your SS5 Pod. These covers are available in a variety of colors and keep your SS5 Pod clean and protected from dirt, dust, or whatever else the road throws your way! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/span\u003e\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SS5 Sport \/ White Combo","offer_id":67723492098197,"sku":"DD6802","price":1631.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Yellow Combo","offer_id":67723492130965,"sku":"DD6803","price":1631.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ White Driving","offer_id":67723492163733,"sku":"DD7214","price":1631.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Yellow Driving","offer_id":67723492196501,"sku":"DD7215","price":1631.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd6802_ss5_lightbar_white_combo_8_crosslink_assembled.jpg?v=1792100940"},{"product_id":"stage-series-led-rock-light-kit-8-pack","title":"Stage Series LED Rock Light Kit (8-pack)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eYour choice of Single-Color, Dual-Color, or RGBW.\u003c\/li\u003e \u003cli\u003eHigh-output LED performance, with dedicated white or multicolor emitters.\u003c\/li\u003e \u003cli\u003eDual-Color models allow instant color switching without lens changes.\u003c\/li\u003e \u003cli\u003eRGBW models offer full color control via remote or Bluetooth app.\u003c\/li\u003e \u003cli\u003eModular mounting options built in, with additional accessory mounts.\u003c\/li\u003e \u003cli\u003eFully-encapsulated, durable design backed by a limited lifetime warranty.\u003c\/li\u003e \u003cli\u003eOptically-engineered, durable polycarbonate lenses for wide, even spread.\u003c\/li\u003e \u003cli\u003eMade in USA with Global Materials.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eLooking to light up more than just the trail? The Stage Series LED Rock Light Kit delivers high-performance lighting with unmatched versatility. Whether you're crawling over rocks, lighting up a campsite, or adding functional lighting to your truck bed or rack, this system is built to adapt to your setup.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOne System. Endless Uses.\u003c\/strong\u003e Stage Series Rock Lights aren't just for off-road use. With powerful output and wide-angle optics, they're perfect for traditional rock lighting, scene lighting, bed and cargo illumination, roof rack setups, and more. From the trail to the campsite, you get reliable, usable light exactly where you need it.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChoose Your Output.\u003c\/strong\u003e Available in multiple configurations to match your needs:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSingle Color:\u003c\/strong\u003e Maximum output with up to 1000 lumens per light. Ideal when brightness is your top priority.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDual-Color (White\/Amber or White\/Red):\u003c\/strong\u003e Instantly switch between high-output white and a low-glare amber or red beam. Perfect for scene lighting, preserving night vision, or reducing glare in dust, fog, or camp environments.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRGBW:\u003c\/strong\u003e Full multicolor control with added pure white output. Customize colors, patterns, and brightness using a remote or Bluetooth app.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for Real-World Use.\u003c\/strong\u003e Unlike basic rock lights, Stage Series lights feature integrated optical lenses designed for wide, even coverage. The thick, automotive-grade polycarbonate lens and rugged aluminum housing are built to handle impacts, weather, and long-term use.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFlexible Mounting Options.\u003c\/strong\u003e Mount them your way with a hidden center bolt or optional magnet mounts. Compatible with a wide range of accessories including surface mounts, rack mounts, and other custom solutions, making it easy to install on vehicles, trailers, campers, and more.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSimple Connections.\u003c\/strong\u003e Each light includes a compact, waterproof M8 connector for a secure, plug-and-play installation. This compact wiring solution makes routing clean and easy in tight spaces. Already running Stage Series Single-Color Rock Lights? Dual-Color models use the same wiring harness, making it easy to upgrade your setup without reworking your wiring.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Single-Color \/ No \/ No","offer_id":67723501535381,"sku":"DD7742","price":431.96,"currency_code":"USD","in_stock":true},{"title":"Single-Color \/ Yes \/ No","offer_id":67723501568149,"sku":"DD7743","price":527.96,"currency_code":"USD","in_stock":true},{"title":"RGBW \/ No \/ No","offer_id":67723501600917,"sku":"DD7744","price":431.96,"currency_code":"USD","in_stock":true},{"title":"RGBW \/ No \/ Yes","offer_id":67723501633685,"sku":"DD7744C","price":511.96,"currency_code":"USD","in_stock":true},{"title":"RGBW \/ Yes \/ No","offer_id":67723501666453,"sku":"DD7745","price":559.96,"currency_code":"USD","in_stock":true},{"title":"RGBW \/ Yes \/ Yes","offer_id":67723501699221,"sku":"DD7745C","price":639.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color White\/Red \/ No \/ No","offer_id":67723501731989,"sku":"DD8746","price":431.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color White\/Red \/ Yes \/ No","offer_id":67723501764757,"sku":"DD8747","price":559.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color White\/Amber \/ No \/ No","offer_id":67723501797525,"sku":"DD8756","price":431.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color White\/Amber \/ Yes \/ No","offer_id":67723501830293,"sku":"DD8757","price":559.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd8746_rocklight_red_white_m8_8_pack_lights_only_1.jpg?v=1792101023"}],"url":"https:\/\/www.diodedynamics.com\/collections\/subaru-crosstrek.oembed","provider":"Diode Dynamics LLC","version":"1.0","type":"link"}