{"title":"Mazda B Series LED Lighting Upgrades","description":null,"products":[{"product_id":"front-turn-signal-leds-for-2000-2009-mazda-b-series-pair","title":"Front Turn Signal LEDs for 2000-2009 Mazda B Series (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Mazda B Series front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3157 bulb size\u003c\/li\u003e \u003cli\u003eGreater output than factory bulbs\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Mazda B Series illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the B Series.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDual Brightness. \u003c\/strong\u003eThe B Series uses a 3157 dual-filament bulb. They light up with low power as parking lights, then they get brighter when the turn signal or hazards are activated. The brightness ratio of your factory bulbs is traditionally 15:100, or 15% lumen output for the dim function. Diode Dynamics bulbs are designed to match this, so there is enough distinction between \"low\" and \"high\" brightness levels. As with all Diode Dynamics LED bulbs, these turn signal bulbs are rated with accurate, measured lumen figures, not calculations or guesses. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchback. \u003c\/strong\u003eThe dual-filament function of your factory turn signal bulbs gives you the ability to choose a unique LED bulb model: switchback! These bulbs illuminate in a bright white for the \"low\" power setting for your running\/parking light, then switch to intense amber when the turn signals are activated. When the turn signal is switched off, they return to the original white output. The result is a modern dual-color effect, as seen on many high-end vehicles on the road. Please note: in order to properly see the white, you must have clear reflectors\/lenses over the turn signal bulb. If your B Series has amber reflectors, you might be able to find clear aftermarket ones to complete this upgrade!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the B Series looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the B Series, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your B Series. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Mazda or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67693327548565,"sku":"DD0050P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP24 \/ Switchback Cool White and Amber","offer_id":67693327581333,"sku":"DD0053P","price":63.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67693327614101,"sku":"DD0055P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67693327646869,"sku":"DD0058P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/frnturn-1936_121677.jpg?v=1791923706"},{"product_id":"3rd-brake-light-led-for-2000-2010-mazda-b-series-one","title":"3rd Brake Light LED for 2000-2010 Mazda B Series (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eIntense red LED illumination\u003c\/li\u003e \u003cli\u003eDirect replacement for Mazda B Series 3rd brake light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 921 bulb size\u003c\/li\u003e \u003cli\u003eInstant on\/off for faster response\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eInstant Brake. \u003c\/strong\u003eThe factory incandescent 3rd brake light bulb on the Mazda B Series lights up in a glow, which takes a moment to turn on. A modern LED upgrade provides instant response, which can alert other drivers on the road earlier, while also providing a modern LED appearance. This third brake light LED is a great upgrade in both style and function.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSelect your Quantity. \u003c\/strong\u003eAs different trim levels often come equipped with different third brake lights, we have listed bulbs individually here. Please double-check on your B Series, and select the quantity needed to replace all of your bulbs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. This provides the most output through the red lens of the 3rd brake light, as the red lens acts as a filter, only allowing red light through.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/3rd_Brake_Light_-_Comparision_Image.jpg\" width=\"639\" height=\"170\" alt=\"3rd Brake Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your B Series. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Mazda or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP5 \/ Red","offer_id":67721589817493,"sku":"DD0030S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"921 XPR Red \/ Red","offer_id":67721589850261,"sku":"DD0395S","price":47.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/3rdbrake-1936_29812.jpg?v=1792097618"},{"product_id":"backup-leds-for-2000-2009-mazda-b-series-pair","title":"Backup LEDs for 2000-2009 Mazda B Series (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Mazda B Series reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3156 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Mazda B Series. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the B Series's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Backup_Light_-_3157.jpg\" width=\"750\" height=\"150\" alt=\"3157 XPR Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your B Series. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Mazda or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Cool White (6000K)","offer_id":67721614721173,"sku":"DD0052P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Cool White (6000K)","offer_id":67721614753941,"sku":"DD0057P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"3157 XPR White \/ Cool White (6000K)","offer_id":67721614786709,"sku":"DD0378P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/bckup-1936_84707.jpg?v=1792097692"},{"product_id":"fog-light-leds-for-2000-2009-mazda-b-series-pair","title":"Fog Light LEDs for 2000-2009 Mazda B Series (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Mazda B Series fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Mazda B Series. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your B Series.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Mazda B Series are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your B Series without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Mazda or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48 \/ Cool White (6000K)","offer_id":67721821782165,"sku":"DD0136P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Cool White (6000K)","offer_id":67721821814933,"sku":"DD0142P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Cool White (6000K)","offer_id":67721821847701,"sku":"DD0465P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Yellow (3000K)","offer_id":67721821880469,"sku":"DD0466P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0465p_sl2_9006_9012_white_pair_fog_c_9ggcmlsgnmyarmtq_7fe88ef3-7cf2-4079-bed6-f1d8c5469583.jpg?v=1792098137"},{"product_id":"license-plate-leds-for-2000-2009-mazda-b-series-pair","title":"License Plate LEDs for 2000-2009 Mazda B Series (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Mazda B Series license plate bulbs\u003c\/li\u003e \u003cli\u003eIncreased output with modern LED appearance\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eUpgrade. \u003c\/strong\u003eAdd a modern appearance to your Mazda B Series with these replacement LED bulbs! These bright LEDs are available in a number of colors including cool white, to replace the factory yellowish incandescent bulbs. If you've been looking for a simple way to upgrade your B Series, you've found it!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_License.jpg\" alt=\"License Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your B Series. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Mazda or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Warm White (3000K)","offer_id":67722105061525,"sku":"DD0020P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Natural White (4000K)","offer_id":67722105094293,"sku":"DD0021P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Pure White (5000K)","offer_id":67722105127061,"sku":"DD0022P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67722105159829,"sku":"DD0024P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67722105192597,"sku":"DD0027P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Natural White (4000K)","offer_id":67722105225365,"sku":"DD0028P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Pure White (5000K)","offer_id":67722105258133,"sku":"DD0029P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67722105290901,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Warm White (3000K)","offer_id":67722105323669,"sku":"DD0035P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Cool White (6000K)","offer_id":67722105356437,"sku":"DD0037P","price":7.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/lic-1936_84263.jpg?v=1792098876"},{"product_id":"rear-turn-signal-leds-for-2000-2009-mazda-b-series-pair","title":"Rear Turn Signal LEDs for 2000-2009 Mazda B Series (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Mazda B Series rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3156 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Mazda B Series illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the B Series.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Rear_Turn_Signal_-_Comparision_Image.jpg\" alt=\"Amber Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we offer both a red and amber option, which meet SAE\/DOT \"amber\" and \"red\" requirements. If you have a clear lens or an amber reflector over the turn signal bulb on your B Series, amber is the correct emitter color for maximum turn signal output. If your vehicle has a red lens over the rear turn signal, then red is the correct emitter for you.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the B Series looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the B Series, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your B Series. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Mazda or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67722387816597,"sku":"DD0050P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP11 \/ Red","offer_id":67722387849365,"sku":"DD0051P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67722387882133,"sku":"DD0055P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722387914901,"sku":"DD0056P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67722387947669,"sku":"DD0058P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67722387980437,"sku":"DD0059P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/rerturn-1936_124311.jpg?v=1792099427"},{"product_id":"sidemarker-leds-for-2000-2009-mazda-b-series-pair","title":"Sidemarker LEDs for 2000-2009 Mazda B Series (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED illumination\u003c\/li\u003e \u003cli\u003eDirect replacement for Mazda B Series sidemarker light bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Upgrade. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the function and longevity of the sidemarkers on your Mazda B Series. They'll provide modern illumination with long lifespan compared to the original incandescent bulbs. The installation is straightforward, with just a bulb swap - making it a simple upgrade for the B Series's lighting setup.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChoose Your Color. \u003c\/strong\u003eYou'll see that there are multiple color options for these bulbs. Please select what you need for your setup! If you have amber lenses in the front, select amber bulbs in order to maximize output. If you have clear front reflectors, like found in many aftermarket headlamps, you can use white or amber bulbs. For the rear, you'll always want to select red bulbs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFront and Rear. \u003c\/strong\u003eThis listing includes one pair of bulbs. If you need both front and rear bulbs, please add one of each to your cart in each respective color. You'll always need red in the rear, and amber or white bulbs are for the front of the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your B Series. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Mazda or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Amber","offer_id":67722619388053,"sku":"DD0018P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Warm White (3000K)","offer_id":67722619420821,"sku":"DD0020P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Red","offer_id":67722619453589,"sku":"DD0023P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67722619486357,"sku":"DD0024P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Amber","offer_id":67722619519125,"sku":"DD0025P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67722619551893,"sku":"DD0027P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Red","offer_id":67722619584661,"sku":"DD0030P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67722619617429,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Amber","offer_id":67722619650197,"sku":"DD0032P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Warm White (3000K)","offer_id":67722619682965,"sku":"DD0035P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Red","offer_id":67722619715733,"sku":"DD0036P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Cool White (6000K)","offer_id":67722619748501,"sku":"DD0037P","price":7.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/sid-1936_116216.jpg?v=1792099853"},{"product_id":"switchback-turn-signal-leds-for-2000-2009-mazda-b-series-pair","title":"Switchback Turn Signal LEDs for 2000-2009 Mazda B-Series (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Mazda B-Series front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3157 bulb size\u003c\/li\u003e \u003cli\u003eGreater output than factory bulbs\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Mazda B-Series illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the B-Series.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDual Brightness. \u003c\/strong\u003eThe B-Series uses a 3157 dual-filament bulb. They light up with low power as parking lights, then they get brighter when the turn signal or hazards are activated. The brightness ratio of your factory bulbs is traditionally 15:100, or 15% lumen output for the dim function. Diode Dynamics bulbs are designed to match this, so there is enough distinction between \"low\" and \"high\" brightness levels. As with all Diode Dynamics LED bulbs, these turn signal bulbs are rated with accurate, measured lumen figures, not calculations or guesses. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchback. \u003c\/strong\u003eThe dual-filament function of your factory turn signal bulbs gives you the ability to choose a unique LED bulb model: switchback! These bulbs illuminate in a bright white for the \"low\" power setting for your running\/parking light, then switch to intense amber when the turn signals are activated. When the turn signal is switched off, they return to the original white output. The result is a modern dual-color effect, as seen on many high-end vehicles on the road. Please note: in order to properly see the white, you must have clear reflectors\/lenses over the turn signal bulb. If your B-Series has amber reflectors, you might be able to find clear aftermarket ones to complete this upgrade!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the B-Series looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the B-Series, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your B-Series. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Mazda or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP24 \/ Switchback Cool White and Amber","offer_id":67722889199765,"sku":"DD0053P","price":63.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/frnturn-1936-sb_108684.jpg?v=1792100180"},{"product_id":"tail-light-leds-for-2000-2009-mazda-b-series-pair","title":"Tail Light LEDs for 2000-2009 Mazda B Series (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Mazda B Series tail light bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3157 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eInstant Brake. \u003c\/strong\u003eThe factory incandescent tail light bulb on the Mazda B Series lights up in a glow, which takes a moment to turn on. A modern LED upgrade provides instant response, which can alert other drivers on the road earlier, while also providing a modern LED appearance. This brake light LED is a great upgrade for your B Series in both style and function.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Tail_Light_-_Comparision_Image.jpg\" alt=\"Tail Light Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eSince the lens on your tail light housing is red, you'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. Red is the correct emitter color for maximum brake light output on your B Series.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your B Series. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Mazda or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Red","offer_id":67722936189077,"sku":"DD0051P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722936221845,"sku":"DD0056P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67722936254613,"sku":"DD0059P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/tail-1936_126786.jpg?v=1792100278"},{"product_id":"trunk-light-led-for-2000-2010-mazda-b-series","title":"Trunk Light LED for 2000-2010 Mazda B Series","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Mazda B Series trunk light bulb\u003c\/li\u003e \u003cli\u003eIncreased output with LED appearance\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 74 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eReplacement LED bulbs are a simple way to improve the look and output of the trunk lights on your Mazda B Series. Compared to the original incandescent bulbs, they will provide a brighter appearance with modern color. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the B Series.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_Trunk_-_SMD.jpg\" width=\"639\" height=\"170\" alt=\"74 Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColor Options.\u003c\/strong\u003e In addition to vibrant colors of blue, red, amber, and green, our trunk light bulbs are available in a cool white 6000K, and warm white 3000K. Whether you want a modern cool white appearance, or a traditional warm white color with more output, we have the color to fit your needs! \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze the exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your B Series. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Mazda or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SMD1 \/ Amber","offer_id":67723031281813,"sku":"DD0118S","price":2.36,"currency_code":"USD","in_stock":true},{"title":"SMD1 \/ Blue","offer_id":67723031314581,"sku":"DD0119S","price":2.36,"currency_code":"USD","in_stock":true},{"title":"SMD1 \/ Green","offer_id":67723031347349,"sku":"DD0120S","price":2.36,"currency_code":"USD","in_stock":true},{"title":"SMD1 \/ Warm White (3000K)","offer_id":67723031380117,"sku":"DD0121S","price":2.36,"currency_code":"USD","in_stock":true},{"title":"SMD1 \/ Red","offer_id":67723031412885,"sku":"DD0122S","price":2.36,"currency_code":"USD","in_stock":true},{"title":"SMD1 \/ Cool White (6000K)","offer_id":67723031445653,"sku":"DD0123S","price":2.36,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Amber","offer_id":67723031478421,"sku":"DD0145S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Blue","offer_id":67723031511189,"sku":"DD0146S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Green","offer_id":67723031543957,"sku":"DD0147S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Warm White (3000K)","offer_id":67723031576725,"sku":"DD0148S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Red","offer_id":67723031609493,"sku":"DD0149S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Cool White (6000K)","offer_id":67723031642261,"sku":"DD0150S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Warm White (3000K)","offer_id":67723031675029,"sku":"DD0192S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Cool White (6000K)","offer_id":67723031707797,"sku":"DD0193S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Red","offer_id":67723031740565,"sku":"DD0194S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Blue","offer_id":67723031773333,"sku":"DD0195S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Amber","offer_id":67723031806101,"sku":"DD0196S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Green","offer_id":67723031838869,"sku":"DD0197S","price":19.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/tnk-1936_118696.jpg?v=1792100473"},{"product_id":"hitchmount-led-pod-7-pin-reverse-kit","title":"HitchMount LED Pod 7-Pin Reverse Kit","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows you to mount an SSC1 or C1R LED pod in any 2-inch or 2.5-inch trailer hitch receiver.\u003c\/li\u003e\n\u003cli\u003eAdds a powerful reverse light, 4th brake light, and additional running light.\u003c\/li\u003e\n\u003cli\u003eSimple 5-minute installation, with no need for custom wiring or routing wires.\u003c\/li\u003e\n\u003cli\u003eOptional SafetyStrobe brake light strobing.\u003c\/li\u003e\n\u003cli\u003eDesigned and assembled in USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eAdd significantly more light output when backing up at night with our Stage Series HitchMount Reverse Light Kit! This kit allows you to mount one SSC1 or C1R LED pod in your 2-inch or 2.5-inch trailer hitch receiver, adding a high-power reverse light, additional running light, and an optional 4th brake light with the C1R option. With the included wiring harness, this kit connects to your vehicle's factory trailer hitch wiring for simple, everyday operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrighter Backup.\u003c\/strong\u003e Factory reverse bulbs just don't provide enough light output to back up at night confidently. By pairing our patented TIR optics with high-powered LEDs, the SSC1 and C1R included in this kit provide an additional reverse light that's several times brighter than stock bulbs alone. And with a recent upgrade, the C1R LED Pod now delivers 68% more light output, providing even more output when backing up at night! Plus, it automatically comes on when the vehicle is put in reverse!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Running Light.\u003c\/strong\u003e The Stage Series LED pod included with this kit features a distinctive red backlight that operates as an additional running light during use! The backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafetyStrobe 4th Brake Light.\u003c\/strong\u003e The C1R option features a high-power red function to serve as a powerful 4th brake light, along with the low-power running light. The high-power red functionality activates anytime you apply your brakes, adding a 4th brake light to your vehicle.\u003c\/p\u003e\n\u003cp\u003eThe C1R also features optional brake light strobing, which can be activated in 15-second intervals. By default, the C1R will flash three times when the brake lights are initially applied, for greater visibility. The SafetyStrobe feature can be easily disabled if desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEveryday Operation.\u003c\/strong\u003e This kit is completely plug-and-play with all 7-pin trailer connectors. The included harness plugs right into your factory trailer hitch wiring for easy installation and operation. The kit operates as an additional red running light with your tail lights, and then automatically switches to a high-power backup light when your vehicle is in reverse. The high-power 4th brake light feature included with the C1R will activate anytime you apply your brakes. If you would like to have override functionality to manually turn on the reverse light anytime, you will need to purchase the universal backup harness.\u003c\/p\u003e\n\u003cp\u003eSome newer trucks feature advanced trailer safety systems that automatically detect when a trailer is connected. To ensure compatibility, each HitchMount kit includes an optional red wire that can tap into your tail light’s brake signal, preventing trailer warnings or dashboard alerts for hassle-free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple Installation.\u003c\/strong\u003e The patent-pending snap-fit design allows you to install this mount in minutes, without any drilling or need for a hitch pin. Simply insert the HitchMount into your trailer hitch receiver and the snap-fit side mounts will snap into place. Installation couldn't be easier and takes less than five minutes!\u003c\/p\u003e\n\u003cp\u003eThis kit is ideal for anyone who uses their trailer hitch often since removal can be done in minutes as well! Simply unplug the harness, press the snap-fit pins and remove the mount. The included DT connector cover protects the harness from dirt and moisture when the HitchMount is not in use. When you're not using your hitch for towing, you can quickly reinstall the HitchMount and plug it back in.\u003c\/p\u003e\n\u003cp\u003eIf you would like to use a locking trailer pin to install this kit instead of the snap-fit pins, you can do so with a quick modification. \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.youtube.com\/watch?v=yr3GmX8EFvg\" target=\"_blank\" rel=\"noopener\"\u003eWatch the video\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e \u003cspan style=\"font-weight: 400\"\u003eTraditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in our Stage Series pods collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more:\u003c\/span\u003e \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the Stage Series LED pods serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of our pods is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output.\u003c\/strong\u003e All Stage Series beam patterns were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood \u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003epattern was designed to provide uniform, even illumination with a full 50x50 degree spread of light on the SSC1 and C1R LED pod. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"C1","offer_id":67723465228437,"sku":"DD7420","price":97.96,"currency_code":"USD","in_stock":true},{"title":"C1R + Brake","offer_id":67723465261205,"sku":"DD7422","price":139.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd7422_c1r_hitch_mount_pod_jdp3wfuact35hwc7_89fcd2b0-7300-4d91-b252-386817b31246.jpg?v=1792100899"},{"product_id":"led-flasher-for-2000-2009-mazda-b-series","title":"LED Flasher for 2000-2009 Mazda B Series","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCompatible with LED bulbs\u003c\/li\u003e \u003cli\u003ePrevents hyperflash errors\u003c\/li\u003e \u003cli\u003eSimple swap for original module\u003c\/li\u003e \u003cli\u003eDirect fitment and proper sizing\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eFlasher\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eHyperblink Fix. \u003c\/strong\u003eWhy do you need this module? When your factory turn signal bulbs go out, your vehicle's flasher senses that less power is being used, and it will blink the turn signals quickly to alert you. Since LED bulbs use less power, you get the same fast blinking, known as \"hyperblinking,\" even though the LEDs are functioning just fine. Basically, your car thinks the bulbs went out!\u003c\/p\u003e \u003cp\u003eTo slow down the blinking to regular speed, you can add resistors to increase the circuit's power consumption again. However, whenever possible, replacing the flasher with a module like this is the easiest option. Simply unplug your original flasher from under the dash, and swap it with this one to prevent hyperblinking.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQuality. \u003c\/strong\u003eThe flashers distributed by Diode Dynamics are produced by industry leaders such as Novita. Watch out for generic cheap flashers, as many are slightly too large and may not fit properly in the socket.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"EP27","offer_id":68010360570005,"sku":"DD4005","price":19.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/flasher-1936_4234.jpg?v=1792513255"},{"product_id":"hi-lo-beam-led-headlight-bulbs-for-2000-2010-mazda-b-series-pair","title":"Hi\/Lo Beam LED Headlight Bulbs for 2000-2010 Mazda B Series (pair)","description":"\u003csection\u003e\u003ch3\u003eHi\/Lo Beam LED Headlight Bulbs for 2000-2010 Mazda B Series (pair)\u003c\/h3\u003e\n\u003cp\u003eUpgrade a compatible 9007 headlight application with your choice of SL2 or SL2 Pro LED bulbs in 6000K Cool White. This listing is for a pair of replacement bulbs; select the design that matches your preferred output and cooling system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSL2:\u003c\/strong\u003e 1100 steady-state lumens per bulb, 15.4 watts, fanless passive cooling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSL2 Pro:\u003c\/strong\u003e 2385 steady-state lumens per bulb, 22.2 watts, integrated top-mounted cooling fan.\u003c\/li\u003e\n\u003cli\u003eBoth designs operate at 9–30V DC, use automotive-grade LED emitters, and include an integrated driver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck the factory bulb size and headlamp option before ordering. Vehicle trims and optional lighting packages may differ. Bulbs are engineered for a focused beam pattern and are backed by a limited lifetime warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication notice.\u003c\/strong\u003e LED replacement bulbs are not compliant with DOT \/ FMVSS 108 for U.S. headlight use and are not street legal in U.S. headlights. Off-road use only. International regulations vary.\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SL2 (1100 lumens)","offer_id":68084263485589,"sku":"DD0487P","price":125.96,"currency_code":"USD","in_stock":true},{"title":"SL2 Pro (2400 lumens)","offer_id":68084263518357,"sku":"DD0490P","price":174.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/e9c1f573cec23ceaa633f1f4fd766fb0.jpg?v=1793976293"}],"url":"https:\/\/www.diodedynamics.com\/collections\/mazda-b-series.oembed","provider":"Diode Dynamics LLC","version":"1.0","type":"link"}