{"title":"Jeep Wrangler LED Lighting Upgrades","description":null,"products":[{"product_id":"backup-leds-for-1997-2006-jeep-wrangler-pair","title":"Backup LEDs for 1997-2006 Jeep Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 1156 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Jeep Wrangler. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Wrangler's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Cool White (6000K)","offer_id":67693205618837,"sku":"DD0003P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Cool White (6000K)","offer_id":67693205651605,"sku":"DD0006P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"1156 XPR White \/ Cool White (6000K)","offer_id":67693205684373,"sku":"DD0369P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/bckup-1631_85519.jpg?v=1791923457"},{"product_id":"2018-2026-jeep-jl-wrangler-cowl-mount-led-brackets","title":"2018-2026 Jeep JL Wrangler Cowl Mount LED Brackets","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCAD-designed for perfect fitment on 2018+ Jeep JL Wrangler.\u003c\/li\u003e \u003cli\u003eFeatures multiple mounting points for endless mounting options.\u003c\/li\u003e \u003cli\u003eCompatible with any pod, worklight, or small light bar.\u003c\/li\u003e \u003cli\u003eWhen a set of standard pods is mounted on the outer slot, they allow you to still fold down the windshield.\u003c\/li\u003e \u003cli\u003eIncludes OEM-style automotive grade hardware designed specifically for this kit.\u003c\/li\u003e \u003cli\u003eUtilizes existing mounting points for easy installation - no cutting or drilling required.\u003c\/li\u003e \u003cli\u003eHighly durable powdercoated steel construction.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003ePerfect fitment.\u003c\/strong\u003e The Cowl Mount LED Light Bar Kit for the 2018-2023 Jeep Wrangler from Diode Dynamics allows you to easily mount just about any auxiliary lighting you can think of. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! They also feature a low profile design, which eliminates excess whistling or major wind noise.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEndless mounting options. \u003c\/strong\u003eThese brackets were designed with a variety of different mounting points for endless mounting options. You can mount multiple pods, a larger worklight, or even a small light bar to achieve the look you're after! There are even slots on the side of the bracket to mount ditch lights. When standard pods are installed on the outer slot, you can fold the windshield down without removing your auxiliary lighting. When installed along with our \u003ca href=\"https:\/\/www.diodedynamics.com\/2018-2019-jeep-jl-wrangler-hood-led-light-bar.html\"\u003eJL Wrangler Hood Light Bar Kit\u003c\/a\u003e, you can easily mount a 50\" Stage Series light bar across the hood as well. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot your average hardware. \u003c\/strong\u003eThe hardware included with this kit is OEM-style, automotive grade hardware. This hardware isn't from the hardware store - it was custom designed for this kit with integrated washers and the same OEM finish as the factory hardware. The Delrin spacers are long-lasting and won't wear over time. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eControl through aux switch bank.\u003c\/strong\u003e Included with the full light bar kit is our new OEM aux switch adapter wire. This wire allows you to control your auxiliary lighting using the factory-installed aux switch bank. For those who don't have the aux switch bank, our Heavy Duty Dual-Output Wiring Harness is also included to mount a switch and connect directly to the battery.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDesigned for performance. \u003c\/strong\u003e Using optical simulation modeling, Diode Dynamics Stage Series LED light bars have been designed for maximum functionality, with compact size, custom-engineered TIR optics, and a useful beam pattern, all in a highly durable package. Our light bars shine light in a highly-functional and useful beam pattern, much more focused than older LEDs on the market. Click here to learn more: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Patterns.\u003c\/strong\u003e All Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern. No matter what your auxiliary lighting needs are, there is a Stage Series optic for you! \u003c\/p\u003e \u003cp\u003eThe \u003cstrong\u003eDriving\u003c\/strong\u003e pattern was designed to supplement your high beams. Rather than a simple \"spot\" pattern, the Stage Series Driving pattern has a rectangular 20Wx8H degree pattern that is far more useful for directing light downrange at high speeds.\u003c\/p\u003e \u003cp\u003eThe \u003cstrong\u003eFlood\u003c\/strong\u003e pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic \"flood\" light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry! It is perfect for lighting up anything at low speeds, a backup or reverse light, or to light up a worksite.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Bracket-Only \/ N\/A","offer_id":67693337182357,"sku":"DD6089","price":95.96,"currency_code":"USD","in_stock":true},{"title":"Four 3\" Sport \/ White Driving\/Flood","offer_id":67693337215125,"sku":"DD6553","price":447.96,"currency_code":"USD","in_stock":true},{"title":"Four 3\" Pro \/ White Driving\/Flood","offer_id":67693337247893,"sku":"DD6554","price":639.96,"currency_code":"USD","in_stock":true},{"title":"Four 3\" Sport \/ Yellow Driving\/Flood","offer_id":67693337280661,"sku":"DD6555","price":447.96,"currency_code":"USD","in_stock":true},{"title":"Four 3\" Pro \/ Yellow Driving\/Flood","offer_id":67693337313429,"sku":"DD6556","price":639.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/18_jeep_jl_wrangler_cowl_mount_installed_greyed.jpg?v=1791923726"},{"product_id":"d-switch-hub-mounting-kit-for-2007-2017-jeep-jk-wrangler","title":"D-Switch Hub Mounting Kit for 2007-2017 Jeep JK Wrangler","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBolt-on installation in the Jeep Wrangler engine bay.\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting points  -  no cutting, drilling, or modification required.\u003c\/li\u003e\n\u003cli\u003eDesigned for easy access to your D-Switch Hub whenever you need it.\u003c\/li\u003e\n\u003cli\u003eOptimal placement does not interfere with your fuse box or battery.\u003c\/li\u003e\n\u003cli\u003ePowdercoated 10-gauge stainless steel construction for long-lasting durability.\u003c\/li\u003e\n\u003cli\u003eMade in USA using Global Materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnsure of where to mount your D-Switch Hub? Check this out! The D-Switch Hub Mount Kit for the Jeep Wrangler eliminates the guesswork and provides a simple, bolt-on mounting solution. This kit bolts directly to OEM mounting points in the engine bay, without interfering with the fuse box or battery, and allows for easy access to the D-Switch Hub.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUltimate Control. \u003c\/strong\u003eThe D-Switch is an advanced 8-channel switch panel that gives you full, customized control over any 12V accessory that you want to wire up. Our engineers have tailored it specifically to be the most functional and effective controller when it comes to your lighting setup.\u003c\/p\u003e\n\u003cp\u003eThe D-Switch features four 30A outputs and four 15A outputs, putting it solidly into the \"serious\" category for total power delivery, but it’s packed with all kinds of other features to customize your setup!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDedicated Backlight Channel. \u003c\/strong\u003eWhile there are many 8-button controllers on the market, the D-Switch stands apart with a 9th button dedicated to the backlight bus bar. The backlight bus provides eight extra outputs for your accent lights, allowing you to connect all of your backlit accessories without using up any of your main outputs. With just the press of a button, you can now activate all of your backlights at once! This is a game-changer for any rig with multiple lights installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Channel Assignment. \u003c\/strong\u003eThe Diode Dynamics D-Switch is designed to give you complete control over your vehicle’s setup with eight customizable output channels. Unlike traditional automotive switch panels that are one-to-one, meaning Channel 1 is always tied to Button 1, the D-Switch allows you to group and configure multiple output channels per button, allowing you to control multiple outputs with a single button.\u003c\/p\u003e\n\u003cp\u003eYou can also power a single output with the different strobing patterns that are included. For example, you can program one button to strobe a light and another to run that same light at full power. Whether you're running Diode Dynamics off-road lighting or any other 12V accessories, the D-Switch allows you to customize each button to do exactly what you need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast, Responsive Bluetooth App. \u003c\/strong\u003eTo activate and use the D-Switch, you can use the included controller, or control it using your phone through the Bluetooth App. That’s where you’ll configure and customize your setup, including button names, images, colors, and channel assignments. Say goodbye to switch panel apps that lag, freeze, or don’t connect. The D-Switch Bluetooth app for iOS and Android delivers instant response and easy programming with no loading screens or connection delays for a seamless and fast experience, every time. The app allows you to pair up to four individual D-Switch units for ultimate control over your entire setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApple CarPlay and Android Auto Compatibility. \u003c\/strong\u003eThe D-Switch now gives you even more ways to control your setup with compatibility for Apple CarPlay and Android Auto. Once your D-Switch is configured through the Bluetooth App, you can access your custom button layout directly from your vehicle’s infotainment screen for convenient in-dash control of all nine channels. Custom button names, images, unit names, and button colors carry over from the app, giving you a familiar control experience whether you’re using the physical controller, your phone, or your vehicle’s display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM Signal Integration. \u003c\/strong\u003eThe D-Switch includes four trigger wires, along with a dedicated Ignition wire for added flexibility. This allows you to control your whole setup using vehicle signals, for a completely integrated experience.\u003c\/p\u003e\n\u003cp\u003eThe ignition wire can be wired into an OEM ignition source and will activate the D-Switch when the ignition is turned on. It will also shut things down when the ignition is turned off. No need to manually turn your panel off! If you want to use any outputs without the ignition turned on, no worries - you can still turn the controller on manually at any time.\u003c\/p\u003e\n\u003cp\u003eThe three trigger wires provide seamless integration with any of your vehicle’s 12V factory signals, such as high beams, fog lights, or reverse lights. This allows you to activate your outputs automatically–no buttons or switches. With some simple programming, your entire setup can operate like it’s fully integrated on your vehicle.\u003c\/p\u003e\n\u003cp\u003eLastly, the Night Mode wire can be used to activate certain outputs, such as dimming outputs, or adjusting settings for low-light conditions. This trigger also adjusts the brightness of the controller’s backlighting automatically when driving at night.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolid-State, Durable Design. \u003c\/strong\u003eBuilt for extreme durability, the D-Switch features a solid-state design with no mechanical relays to wear out, or physical fuses to replace. The hub is encapsulated with an aluminum heatsink, ensuring superior heat dissipation. Both the hub and controller feature an IP67 weather resistance rating for all electronics, excluding wiring terminals, ensuring long-term reliability and performance. The mount included in the kit is constructed out of 10-gauge stainless steel and finished in a durable powdercoat. With a 3-year limited warranty, this kit is built to withstand whatever you throw at it, whether you're off-roading or on the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we directly manufacture and engineer an increasing number of products ourselves in the United States using globally sourced materials, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Bracket-Only","offer_id":67693338689685,"sku":"DD8569","price":87.96,"currency_code":"USD","in_stock":true},{"title":"D-Switch w\/ Bracket","offer_id":67693338722453,"sku":"DD8786","price":567.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2025_toyota_4runner_universal_d-switch_hub_mounting_kit_installed_-1.jpg?v=1791923717"},{"product_id":"led-sidemarkers-for-2018-2026-jeep-jl-wrangler-pair","title":"LED Sidemarkers for 2018-2026 Jeep JL Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED replacements for factory 2018-2025 Jeep JL Wrangler sidemarkers\u003c\/li\u003e \u003cli\u003eClean appearance with clear lens option, matches factory DRL\u003c\/li\u003e \u003cli\u003eIncreased output, with full strip of LEDs\u003c\/li\u003e \u003cli\u003ePlug-and-play installation, no modification needed\u003c\/li\u003e \u003cli\u003eOEM fit-and-finish with factory DRL housing\u003c\/li\u003e \u003cli\u003eEngineered and assembled in USA\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eUpgraded Styling. \u003c\/strong\u003eIf you're looking to give your 2018-2025 JL Wrangler an upgrade in styling and appearance, this is the perfect way to do it! Available in three lens color, these replacement LED sidemarkers provide the custom, unique look you're after! The popular clear option provides a unique \"wraparound\" effect with the factory DRL lamps to really set your JL apart on the road. Illuminating with a full array of LEDs, they also illuminate much brighter than factory!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePerfect Fitment. \u003c\/strong\u003eComputer-designed for perfect alignment with the JL's factory DRL lamps, these replacement LED sidemarkers drop right into place of the factory sidemarker housing. These sidemarkers are compatible with all JL models, whether you have the factory LEDs or standard lighting. Best of all, there is no modification required to install them!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOEM Grade. \u003c\/strong\u003eUnlike others on the market, the Diode Dynamics LED sidemarkers use OEM-grade retroreflector optics, which provide reflective safety and a clean, premium appearance when off. Compare this to \"diffuser\" or plain flat lenses, without any reflective features. The units themselves are designed directly from OEM CAD data for a perfect fit, and the connector plugs right into the factory socket. Click here to learn more: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=tfBnCliLniM\"\u003eLED Sidemarkers Compared: Diode Dynamics vs eBay Imports video\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eLike most Diode Dynamics products, these JL Wrangler Sidemarker LEDs are designed with newer constant-current circuitry and transient voltage protection. These features, found in factory-installed lighting components, protect the circuit over time, ensuring years of flicker-free performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike all other LED distributors, we assemble and engineer products in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e \u003ch3\u003eOptions\u003c\/h3\u003e \u003cp\u003eAll sidemarkers illuminate in bright amber, but there are three colors of lenses. Choose the one that fits your style!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eClear\u003c\/strong\u003e Matches the factory DRL lamps perfectly! These are clear in color, but still have the retroreflector optics. (May not meet compliance requirements in your region.)\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAmber\u003c\/strong\u003e Also called OEM, these match your original, and are DOT\/SAE compliant in both illumination and lens color.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSmoked\u003c\/strong\u003e A dark appearance, great on black and grey vehicles. (May not meet compliance requirements in your region.)\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Clear","offer_id":67693340786837,"sku":"DD5068","price":79.96,"currency_code":"USD","in_stock":true},{"title":"Amber","offer_id":67693340819605,"sku":"DD5069","price":79.96,"currency_code":"USD","in_stock":true},{"title":"Smoked","offer_id":67693340852373,"sku":"DD5070","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/jeep_jl_sidemarker-13-cropped.jpg?v=1791923725"},{"product_id":"ss5-bumper-led-pod-light-kit-for-2007-2018-jeep-jk-wrangler","title":"SS5 Bumper LED Pod Light Kit for 2007-2018 Jeep JK Wrangler","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eBolt-on fitment on 2007-2018 Jeep JK Wrangler\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eUltra-high intensity, with custom-engineered TIR optics\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSelectable backlight color, with eight color options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eTorture-tested, heavy-duty construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eAssembled in USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Fitment.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e The \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eBumper \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eLED Pod Light Kit for the \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e2007-2018 Jeep JK Wrangler\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e from Diode Dynamics allows you to mount two \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eSS5 LED pods \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eon the factory bumper\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e. These application-specific brackets were CAD-designed to bolt into place using factory mounting points\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e. No cutting or drilling required! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for Performance.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Featuring the highest output intensity of any 5-inch LED pod on the market, these auxiliary lamps have been designed for maximum functionality, with patented technology and custom-engineered TIR optics, all in a durable package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES_B.gif\" alt=\"SS5 Backlight Functionality\" width=\"30%\" height=\"100\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelectable Backlight.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e The Stage Series 5\" LED Pods included in the White kit feature a selectable backlight with eight different color options, perfect for an extra styling accent, or for more visibility when you’re not using the main beam. Selecting your backlight color is easy - simply alternate the power on and off. There’s no complicated programming with a controller! The SS5's backlight fully illuminates the TIR optic, providing unique accent lighting that you won't find on other LED pods. \u003c\/span\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Due to the yellow lens, the Yellow kit is only available with an Amber backlight color.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES2.gif\" alt=\"SS5 Backlight Functionality\" width=\"100%\" height=\"267\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series beam pattern options were designed with advanced optical simulation modeling, to shape the output in highly-functional beam patterns with high efficiency. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCombo \u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003epattern combines both the Driving and Flood optics, perfect for all-around use. It shines light downrange in a focused 30x20 Driving beam to punch with distance, and fills in the surrounding area to create a full 70x30 degree pattern. With a row of driving optics in the middle, and a flood optic on the top and bottom, this has been designed to provide extra light for every situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cstrong\u003eDriving\u003c\/strong\u003e is great for general illumination at speed. Rather than a traditional \"spot\" pattern, the Stage Series Driving pattern shines in a 30x20 degree spread, providing just enough width to fully illuminate the road ahead at high speeds, but still staying focused to avoid too much foreground light. Although the SS5 Driving is too bright to be considered an SAE Auxiliary High Beam, it is perfect for an extra boost of light at speed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_5_Beam_Patterns_-_Description_Combo_Driving_B_1.jpg\" alt=\"\" width=\"785\" height=\"272\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output, and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterchangeable Lens.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Need a different beam pattern or color? You can swap it yourself! We offer \u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003ereplacement lenses\u003c\/span\u003e\u003c\/a\u003e that allow you to change the color or optic of your Stage Series SS5 Pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSport or Pro.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available at two different power levels. All options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output. The Sport model uses nine high-intensity LEDs for 40W of total power. The Pro model steps things up in a big way, with double the total power at 90W. Click the Specifications tab to see more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSnap-on covers.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e For states that require them, we also offer \u003c\/span\u003e\u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cspan style=\"color: #c00000\"\u003esnap-on covers\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400\"\u003e for your SS5 Pod. These covers are available in a variety of colors and keep your SS5 Pod clean and protected from dirt, dust, or whatever else the road throws your way! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/span\u003e\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SS5 Sport \/ White Combo","offer_id":67711527288981,"sku":"DD7274","price":447.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ White Combo","offer_id":67711527321749,"sku":"DD7275","price":687.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ White Driving","offer_id":67711527354517,"sku":"DD7276","price":447.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ White Driving","offer_id":67711527387285,"sku":"DD7277","price":687.96,"currency_code":"USD","in_stock":true},{"title":"Bracket-Only \/ N\/A","offer_id":67711527420053,"sku":"DD7282P","price":95.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Yellow Combo","offer_id":67711527452821,"sku":"DD7284","price":447.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ Yellow Combo","offer_id":67711527485589,"sku":"DD7285","price":687.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Yellow Driving","offer_id":67711527518357,"sku":"DD7286","price":447.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ Yellow Driving","offer_id":67711527551125,"sku":"DD7287","price":687.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2015_jeep_jk_ss5_2pod_grille_creative_close_on_1.jpg?v=1792012416"},{"product_id":"ss5-windshield-crosslink-lightbar-kit-for-2018-2026-jeep-jl-wrangler","title":"SS5 Windshield CrossLink Lightbar Kit for 2018-2026 Jeep JL Wrangler","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eBolt-on fitment on 2018-2026 Jeep JL Wrangler\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eUltra-high intensity, with custom-engineered TIR optics\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSelectable backlight color, with eight color options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eTorture-tested, heavy-duty construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eControl through factory aux switch bank using the included harness\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eAssembled in USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Fitment.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e The \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eWindshield \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eCrossLink Lightbar Kit for the \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e2018-2026 Jeep JL Wrangler\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e from Diode Dynamics allows you to mount eight linked SS5 LED pods above the factory windshield. These application-specific brackets were CAD-designed to bolt into place using factory mounting points above the factory windshield. No cutting or drilling required!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for Performance.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Featuring the highest output intensity of any 5-inch LED pod on the market, these auxiliary lamps have been designed for maximum functionality, with patented technology and custom-engineered TIR optics, all in a durable package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES_B.gif\" alt=\"SS5 Backlight Functionality\" width=\"30%\" height=\"100\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelectable Backlight.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e The Stage Series 5\" LED Pods included in the White kit feature a selectable backlight with eight different color options, perfect for an extra styling accent, or for more visibility when you’re not using the main beam. Selecting your backlight color is easy - simply alternate the power on and off. There’s no complicated programming with a controller! The SS5's backlight fully illuminates the TIR optic, providing unique accent lighting that you won't find on other LED pods. \u003c\/span\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Due to the yellow lens, the Yellow kit is only available with an Amber backlight color.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES2.gif\" alt=\"SS5 Backlight Functionality\" width=\"100%\" height=\"267\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCrossLink.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Our patent-pending CrossLink technology allows you to link the eight SS5s included in this kit together to create a single lightbar. Unlike other options on the market that use multiple pieces to link pods together, we have designed a single-piece CNC aluminum link. This provides extreme rigidity, but is fully adjustable, for both straight and curved configurations. And thanks to inset threaded mounts built-in to every SS5, there is no need to buy a special linking version of the SS5 for your setup. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControl through OEM Aux Switches.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Both kits include an OEM aux switch adapter wire that connects to the harness and allows you to control your lights using the factory-installed aux switch bank. Two switches will be used - one for the main beam, and one for the backlight. For those who don't have the aux switch bank, you will use the toggle switch adapter wire included with the harness to mount a switch. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series beam pattern options were designed with advanced optical simulation modeling, to shape the output in highly-functional beam patterns with high efficiency. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCombo \u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003epattern combines both the Driving and Flood optics, perfect for all-around use. It shines light downrange in a focused 30x20 Driving beam to punch with distance, and fills in the surrounding area to create a full 70x30 degree pattern. With a row of driving optics in the middle, and a flood optic on the top and bottom, this has been designed to provide extra light for every situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_5_Beam_Patterns_-_Description_Combo_B_1.jpg\" alt=\"\" width=\"785\" height=\"272\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output, and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterchangeable Lens.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Need a different beam pattern or color? You can swap it yourself! We offer \u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003ereplacement lenses\u003c\/span\u003e\u003c\/a\u003e that allow you to change the color or optic of your Stage Series SS5 Pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSnap-on covers.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e For states that require them, we also offer \u003c\/span\u003e\u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cspan style=\"color: #c00000\"\u003esnap-on covers\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400\"\u003e for your SS5 Pod. These covers are available in a variety of colors and keep your SS5 Pod clean and protected from dirt, dust, or whatever else the road throws your way! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/span\u003e\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Bracket-Only \/ N\/A","offer_id":67711528075413,"sku":"DD6820P","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Cool White (6000K)","offer_id":67711528108181,"sku":"DD6821","price":1951.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Yellow (3000K)","offer_id":67711528140949,"sku":"DD6822","price":1951.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2018_jeep_jl_ss5_close_windshield_creative_on_1.jpg?v=1792012382"},{"product_id":"2018-2026-jeep-jl-wrangler-rear-hardtop-ss30-led-light-bar-bracket-kit","title":"2018-2026 Jeep JL Wrangler Rear Hardtop SS30 LED Light Bar Bracket Kit","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eCAD-designed for perfect fitment on 2018+ Jeep JL Wrangler.\u003c\/li\u003e \u003cli\u003eAllows you to mount one 30\" light bar across the rear window hinge.\u003c\/li\u003e \u003cli\u003eLow profile design allows rear window to remain fully functional.\u003c\/li\u003e \u003cli\u003eDesigned to eliminate any excess wind noise.\u003c\/li\u003e \u003cli\u003eUtilizes existing mounting points for easy installation - no cutting or drilling required.\u003c\/li\u003e \u003cli\u003eHighly durable powdercoated steel construction.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003ePerfect fitment.\u003c\/strong\u003e The Rear Hardtop LED Light Bar Bracket Kit for the 2018+ Jeep Wrangler from Diode Dynamics allows you to easily mount a 30\" light bar across the rear window hinge. These application-specific brackets were CAD-designed to install using factory mounting points. No cutting or drilling required! This kit is perfect as a backup or reverse light, or to light up the trails or a campsite. This lightbar is not designed to be connected to the factory backup wiring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow profile. \u003c\/strong\u003eThese brackets were designed in-house specifically for our Stage Series light bar. The low profile design eliminates any excess wind noise, and allows the rear window to remain fully functional.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDesigned for performance. \u003c\/strong\u003eOur Stage Series LED Light Bar optics were designed using optical simulation modeling, to shape the output in a highly-functional beam pattern. The Flood pattern was designed to provide uniform, even illumination and a full 80Wx50H degree spread of light. Unlike generic \"flood\" light optics that are simply a heavily diffused spot, our flood optic is a true optically designed spread, resulting in the biggest spread in the industry!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"SS30 Sport (120 watts) \/ White Flood","offer_id":67721581035669,"sku":"DD8988","price":519.96,"currency_code":"USD","in_stock":true},{"title":"SS30 Sport (120 watts) \/ Yellow Flood","offer_id":67721581068437,"sku":"DD8990","price":519.96,"currency_code":"USD","in_stock":true},{"title":"SS30 Pro (165 watts) \/ White Flood","offer_id":67721581101205,"sku":"DD8992","price":679.96,"currency_code":"USD","in_stock":true},{"title":"SS30 Pro (165 watts) \/ Yellow Flood","offer_id":67721581133973,"sku":"DD8994","price":679.96,"currency_code":"USD","in_stock":true},{"title":"Bracket-Only \/ N\/A","offer_id":68171431018645,"sku":"DD8987","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd8988_jeep_2018_ss30_hardtop_led_kit_sport_white_flood_abl_kit_on_detail.jpg?v=1792097619"},{"product_id":"3rd-brake-light-led-for-1997-2006-jeep-wrangler-one","title":"3rd Brake Light LED for 1997-2006 Jeep Wrangler (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eIntense red LED illumination\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler 3rd brake light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 921 bulb size\u003c\/li\u003e \u003cli\u003eInstant on\/off for faster response\u003c\/li\u003e \u003cli\u003eCosmetic upgrade only\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eInstant Brake. \u003c\/strong\u003eThe factory incandescent 3rd brake light bulb on the Jeep Wrangler lights up in a glow, which takes a moment to turn on. A modern LED upgrade provides instant response, which can alert other drivers on the road earlier, while also providing a modern LED appearance. This third brake light LED is a great upgrade in both style and function.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSelect your Quantity. \u003c\/strong\u003eAs different trim levels often come equipped with different third brake lights, we have listed bulbs individually here. Please double-check on your Wrangler, and select the quantity needed to replace all of your bulbs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eYou'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. This provides the most output through the red lens of the 3rd brake light, as the red lens acts as a filter, only allowing red light through.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAt 4 lumens, the HP5 is a cosmetic upgrade only and will not provide an increase in light output compared to your factory bulb. All Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP5 \/ Red","offer_id":67721586901141,"sku":"DD0030S","price":10.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0030s_194_hp5_red_single_3rd_brake_titled_1.jpg?v=1792097591"},{"product_id":"2018-2026-jeep-jl-wrangler-bumper-led-lightbar-kit","title":"2018-2026 Jeep JL Wrangler Bumper LED Lightbar Kit","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePatented TIR Optics for maximum efficiency and output.\u003c\/li\u003e\n\u003cli\u003eUpgraded beam patterns engineered for real-world performance.\u003c\/li\u003e\n\u003cli\u003eTrue amber backlight provides unique accent lighting.\u003c\/li\u003e\n\u003cli\u003eAvailable in Sport and Pro power levels.\u003c\/li\u003e\n\u003cli\u003eDurable aluminum housing with ASTM-standard powdercoat finish.\u003c\/li\u003e\n\u003cli\u003eBuilt for the extreme with IP69K waterproof rating.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty.\u003c\/li\u003e\n\u003cli\u003eMade in USA with Global Materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe 2018-2026 Jeep JL Wrangler Bumper LED Lightbar Kit adds powerful auxiliary lighting with a clean, OEM-style appearance. These application-specific brackets have been CAD-designed to mount a 30-inch LED Light Bar above the front bumper using factory mounting points. No cutting or drilling required! The brackets provide precise, factory-style placement for the light bar while allowing clearance for accessories like a winch. With higher light output, modern optics, and greater intensity than anything else on the market, the new Stage Series Lightbars are the most capable lightbars available today!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControl Through Auxiliary Switch. \u003c\/strong\u003eThe kit includes our OEM aux switch adapter wire, allowing you to control your auxiliary lighting using the factory-installed aux switch bank. For those without a switch bank, the included Heavy Duty Single-Output Wiring Harness allows for a direct battery connection and standalone switch operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for Performance. \u003c\/strong\u003eEach Stage Series Light Bar has been engineered from the ground up with the most modern optical, thermal, and circuit board technologies to provide more output than any other light bar on the market. Unlike reflectors, TIR optics capture and focus nearly all of the light output, shining it only where you need it, without glare or wasted light.\u003c\/p\u003e\n\u003cp\u003eThanks to copper circuit boards on the high-power models, thermal transfer materials, and optimized heatsinks, these lightbars effectively dissipate heat from the LED chips, allowing them to run at maximum power, producing serious light output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Beam Patterns. \u003c\/strong\u003eEach beam pattern has been fine-tuned for real-world conditions to perform even better than before.\u003c\/p\u003e\n\u003cp\u003eThe all-new \u003cstrong\u003eCombo\/Driving\u003c\/strong\u003e pattern has been engineered to blend distance and width into one balanced beam pattern. Everyone wants a great all-around light, and while other options on the market try to tackle this by combining two patterns, the resulting output is less than desirable–spot gives you a harsh hotspot, while a flood or wide pattern produces unwanted glare and wasted light. Our new Combo\/Driving optic uses dozens of carefully-designed pillow optics to produce a blended, even output that measures 60x30 degrees and gives you throw downrange while still providing ample foreground illumination. It’s the ideal choice when you want one bar that can handle just about any situation, and it elevates the standard for what a Combo light should be.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it's also great for general illumination, providing extra punch and distance ahead, without being a tight spot pattern. The SAE Driving pattern is a slightly broad-spot that balances reach and width with a spread of 20x12 degrees. If you’re looking to add extra distance and output to your setup, this is the perfect option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmber Backlight. \u003c\/strong\u003eAll Stage Series LED Light Bars include an integrated amber backlight that fully illuminates the TIR optic, providing distinctive accent lighting and enhanced visibility when parked or stopped on the trail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThis Stealth LED Light Bar Kit is available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output, and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose Your Power Level. \u003c\/strong\u003eThe SS30 Light Bar is available in two different power levels. The Sport model delivers impressive performance and value, while the Pro model provides a noticeable increase in total output and intensity for those who demand the highest level of performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States using globally sourced materials, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"N\/A \/ N\/A","offer_id":67721587753109,"sku":"DD6077","price":511.96,"currency_code":"USD","in_stock":true},{"title":"SS30 Pro \/ White SAE Driving","offer_id":67721587785877,"sku":"DD8680","price":719.96,"currency_code":"USD","in_stock":true},{"title":"SS30 Pro \/ White Combo\/Driving","offer_id":67721587818645,"sku":"DD8681","price":719.96,"currency_code":"USD","in_stock":true},{"title":"SS30 Pro \/ Yellow SAE Driving","offer_id":67721587851413,"sku":"DD8682","price":719.96,"currency_code":"USD","in_stock":true},{"title":"SS30 Pro \/ Yellow Combo\/Driving","offer_id":67721587884181,"sku":"DD8683","price":719.96,"currency_code":"USD","in_stock":true},{"title":"SS30 Sport \/ White SAE Driving","offer_id":67721587916949,"sku":"DD8717","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS30 Sport \/ White Combo\/Driving","offer_id":67721587949717,"sku":"DD8718","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS30 Sport \/ Yellow SAE Driving","offer_id":67721587982485,"sku":"DD8719","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS30 Sport \/ Yellow Combo\/Driving","offer_id":67721588015253,"sku":"DD8720","price":559.96,"currency_code":"USD","in_stock":true},{"title":"Bracket-Only \/ N\/A","offer_id":68257836695701,"sku":"DD8693","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2018_jeep_wrangler_jl_ss30_bumper_lightbar_detailed_on.jpg?v=1792097653"},{"product_id":"backup-leds-for-2007-2017-jeep-wrangler-pair","title":"Backup LEDs for 2007-2017 Jeep Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3157 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Jeep Wrangler. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Wrangler's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Backup_Light_-_3157.jpg\" width=\"750\" height=\"150\" alt=\"3157 XPR Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Cool White (6000K)","offer_id":67721634644117,"sku":"DD0052P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Cool White (6000K)","offer_id":67721634676885,"sku":"DD0057P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"3157 XPR White \/ Cool White (6000K)","offer_id":67721634709653,"sku":"DD0378P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0378p_3157_xpr_white_pair_titled_b_4.jpg?v=1792097739"},{"product_id":"backup-leds-for-2018-2026-jeep-jl-wrangler-pair","title":"Backup LEDs for 2018-2026 Jeep JL Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrighter, cool white LED output\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler reverse light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7440 bulb size\u003c\/li\u003e \u003cli\u003eImproved visibility behind vehicle\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eBrighter Backup. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the look and function of the reverse light on your Jeep Wrangler. You will get higher visibility at night, with a modern look. The installation is straightforward, with just a bulb swap - making this one of the easiest ways to improve the Wrangler's lighting.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Backup_Light_-_7443_2.jpg\" width=\"750\" height=\"150\" alt=\"7443 XPR Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48 \/ Cool White (6000K)","offer_id":67721657155733,"sku":"DD0113P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"7443 XPR White \/ Cool White (6000K)","offer_id":67721657188501,"sku":"DD0386P","price":95.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0386p_7443_xpr_white_pair_titled_5.jpg?v=1792097795"},{"product_id":"d-switch-hub-mounting-kit-for-2018-2026-jeep-jl-wrangler","title":"D-Switch Hub Mounting Kit for 2018-2026 Jeep JL Wrangler","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBolt-on installation in the Jeep Wrangler engine bay.\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting points  -  no cutting, drilling, or modification required.\u003c\/li\u003e\n\u003cli\u003eDesigned for easy access to your D-Switch Hub whenever you need it.\u003c\/li\u003e\n\u003cli\u003eOptimal placement does not interfere with your fuse box or battery.\u003c\/li\u003e\n\u003cli\u003ePowdercoated 10-gauge stainless steel construction for long-lasting durability.\u003c\/li\u003e\n\u003cli\u003eMade in USA using Global Materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUnsure of where to mount your D-Switch Hub? Check this out! The D-Switch Hub Mount Kit for the Jeep Wrangler eliminates the guesswork and provides a simple, bolt-on mounting solution. This kit bolts directly to OEM mounting points in the engine bay, without interfering with the fuse box or battery, and allows for easy access to the D-Switch Hub.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUltimate Control. \u003c\/strong\u003eThe D-Switch is an advanced 8-channel switch panel that gives you full, customized control over any 12V accessory that you want to wire up. Our engineers have tailored it specifically to be the most functional and effective controller when it comes to your lighting setup.\u003c\/p\u003e\n\u003cp\u003eThe D-Switch features four 30A outputs and four 15A outputs, putting it solidly into the \"serious\" category for total power delivery, but it’s packed with all kinds of other features to customize your setup!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDedicated Backlight Channel. \u003c\/strong\u003eWhile there are many 8-button controllers on the market, the D-Switch stands apart with a 9th button dedicated to the backlight bus bar. The backlight bus provides eight extra outputs for your accent lights, allowing you to connect all of your backlit accessories without using up any of your main outputs. With just the press of a button, you can now activate all of your backlights at once! This is a game-changer for any rig with multiple lights installed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDynamic Channel Assignment. \u003c\/strong\u003eThe Diode Dynamics D-Switch is designed to give you complete control over your vehicle’s setup with eight customizable output channels. Unlike traditional automotive switch panels that are one-to-one, meaning Channel 1 is always tied to Button 1, the D-Switch allows you to group and configure multiple output channels per button, allowing you to control multiple outputs with a single button.\u003c\/p\u003e\n\u003cp\u003eYou can also power a single output with the different strobing patterns that are included. For example, you can program one button to strobe a light and another to run that same light at full power. Whether you're running Diode Dynamics off-road lighting or any other 12V accessories, the D-Switch allows you to customize each button to do exactly what you need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast, Responsive Bluetooth App. \u003c\/strong\u003eTo activate and use the D-Switch, you can use the included controller, or control it using your phone through the Bluetooth App. That’s where you’ll configure and customize your setup, including button names, images, colors, and channel assignments. Say goodbye to switch panel apps that lag, freeze, or don’t connect. The D-Switch Bluetooth app for iOS and Android delivers instant response and easy programming with no loading screens or connection delays for a seamless and fast experience, every time. The app allows you to pair up to four individual D-Switch units for ultimate control over your entire setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApple CarPlay and Android Auto Compatibility. \u003c\/strong\u003eThe D-Switch now gives you even more ways to control your setup with compatibility for Apple CarPlay and Android Auto. Once your D-Switch is configured through the Bluetooth App, you can access your custom button layout directly from your vehicle’s infotainment screen for convenient in-dash control of all nine channels. Custom button names, images, unit names, and button colors carry over from the app, giving you a familiar control experience whether you’re using the physical controller, your phone, or your vehicle’s display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOEM Signal Integration. \u003c\/strong\u003eThe D-Switch includes four trigger wires, along with a dedicated Ignition wire for added flexibility. This allows you to control your whole setup using vehicle signals, for a completely integrated experience.\u003c\/p\u003e\n\u003cp\u003eThe ignition wire can be wired into an OEM ignition source and will activate the D-Switch when the ignition is turned on. It will also shut things down when the ignition is turned off. No need to manually turn your panel off! If you want to use any outputs without the ignition turned on, no worries - you can still turn the controller on manually at any time.\u003c\/p\u003e\n\u003cp\u003eThe three trigger wires provide seamless integration with any of your vehicle’s 12V factory signals, such as high beams, fog lights, or reverse lights. This allows you to activate your outputs automatically–no buttons or switches. With some simple programming, your entire setup can operate like it’s fully integrated on your vehicle.\u003c\/p\u003e\n\u003cp\u003eLastly, the Night Mode wire can be used to activate certain outputs, such as dimming outputs, or adjusting settings for low-light conditions. This trigger also adjusts the brightness of the controller’s backlighting automatically when driving at night.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolid-State, Durable Design. \u003c\/strong\u003eBuilt for extreme durability, the D-Switch features a solid-state design with no mechanical relays to wear out, or physical fuses to replace. The hub is encapsulated with an aluminum heatsink, ensuring superior heat dissipation. Both the hub and controller feature an IP67 weather resistance rating for all electronics, excluding wiring terminals, ensuring long-term reliability and performance. The mount included in the kit is constructed out of 10-gauge stainless steel and finished in a durable powdercoat. With a 3-year limited warranty, this kit is built to withstand whatever you throw at it, whether you're off-roading or on the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we directly manufacture and engineer an increasing number of products ourselves in the United States using globally sourced materials, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Bracket-Only","offer_id":67721670099093,"sku":"DD8571","price":47.96,"currency_code":"USD","in_stock":true},{"title":"D-Switch w\/ Bracket","offer_id":67721670131861,"sku":"DD8785","price":527.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2025_toyota_4runner_universal_d-switch_hub_mounting_kit_installed_-3_1.jpg?v=1792097850"},{"product_id":"dome-light-led-for-1997-2002-jeep-wrangler-one","title":"Dome Light LED for 1997-2002 Jeep Wrangler (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWarm or cool white LED, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler dome light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eReplacement LED bulbs are a simple way to improve the look and styling of the dome lights on your Jeep Wrangler. Compared to the original incandescent bulbs, they will provide a brighter appearance with modern color. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColor Options.\u003c\/strong\u003e In addition to vibrant colors of blue, red, amber, and green, our dome light bulbs are available in a cool white 6000K, pure white 5000K, natural white 4000K, and warm white 3000K. Whether you want a modern cool white appearance, or a traditional warm white color with more output, we have the color to fit your needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze the exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Amber","offer_id":67721671606421,"sku":"DD0018S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Blue","offer_id":67721671639189,"sku":"DD0019S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Warm White (3000K)","offer_id":67721671671957,"sku":"DD0020S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Natural White (4000K)","offer_id":67721671704725,"sku":"DD0021S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Pure White (5000K)","offer_id":67721671737493,"sku":"DD0022S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Red","offer_id":67721671770261,"sku":"DD0023S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67721671803029,"sku":"DD0024S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Amber","offer_id":67721671835797,"sku":"DD0025S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Blue","offer_id":67721671868565,"sku":"DD0026S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67721671901333,"sku":"DD0027S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Natural White (4000K)","offer_id":67721671934101,"sku":"DD0028S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Pure White (5000K)","offer_id":67721671966869,"sku":"DD0029S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Red","offer_id":67721671999637,"sku":"DD0030S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67721672032405,"sku":"DD0031S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Amber","offer_id":67721672065173,"sku":"DD0032S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Blue","offer_id":67721672097941,"sku":"DD0033S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Green","offer_id":67721672130709,"sku":"DD0034S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Warm White (3000K)","offer_id":67721672163477,"sku":"DD0035S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Red","offer_id":67721672196245,"sku":"DD0036S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Cool White (6000K)","offer_id":67721672229013,"sku":"DD0037S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Green","offer_id":67721672261781,"sku":"DD0203S","price":6.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dom-1631_118456.jpg?v=1792097943"},{"product_id":"dome-light-led-for-2007-2018-jeep-jk-wrangler","title":"Dome Light LED for 2007-2018 Jeep JK Wrangler","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWarm or cool white LED, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep JK Wrangler dome light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 41mm Festoon bulb size\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eReplacement LED bulbs are a simple way to improve the look and styling of the dome lights on your Jeep JK Wrangler. Compared to the original incandescent bulbs, they will provide a brighter appearance with modern color. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the JK Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColor Options.\u003c\/strong\u003e In addition to vibrant colors of blue, red, and amber, our dome light bulbs are available in a cool white 6000K, and warm white 3000K. Whether you want a modern cool white appearance, or a traditional warm white color with more output, we have the color to fit your needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze the exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your JK Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP6 \/ Amber","offer_id":67721687105685,"sku":"DD0316S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Blue","offer_id":67721687138453,"sku":"DD0317S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Cool White (6000K)","offer_id":67721687171221,"sku":"DD0320S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Red","offer_id":67721687203989,"sku":"DD0322S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP6 \/ Warm White (3000K)","offer_id":67721687236757,"sku":"DD0354S","price":10.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/41mm_hp6_cool_dome_titled_4.jpg?v=1792097875"},{"product_id":"elite-led-headlights-for-2018-2026-jeep-jl-wrangler","title":"Elite LED Headlights for 2018-2026 Jeep JL Wrangler","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eBi-LED projector for maximum output and intensity\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSelectable color daytime running light\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eModern welcome sequence\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eIntegrated amber turn signal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eOptional show mode and off-road lighting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eEngineered and Assembled in USA - 8 Year Warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003eIntroducing Elite Series LED Headlights for the 2018+ Jeep \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e JL Wrangler \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003efrom Diode Dynamics! These headlights were designed for maximum performance, and they are the only 9-inch headlights that are 100% engineered and assembled in the USA. With the latest technology and features, they redefine what’s possible for aftermarket headlights!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWith OEM-grade quality, the Elite Series headlights will add a switchback turn signal, welcome sequence, a brighter DRL halo with selectable color, and optional offroad lighting and show mode. Plus, you’ll get unmatched performance and output, backed by an 8-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Light Output.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e First and foremost, the Elite Series LED Headlights provide full LED illumination for both low beam and high beam function, with the modern, rectangular bi-LED projector. This unit provides higher intensity than both the OEM halogen and LED options, shining light far down the road ahead. The beam pattern has a sharp cutoff, with excellent center intensity and strong width, for a fantastic nighttime driving experience. The same projector is installed on both the Elite and Elite Max models.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelcome Sequence.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e If your Jeep is equipped with automatic locks, your Elite Series headlights will show off their capabilities anytime you hit the unlock button with a gradual illumination of the LEDs. This provides an unmistakable indicator of the modern technology packed inside. Note that this feature is programmable, and can be easily disabled if desired.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelectable DRL - On the Fly.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e These headlights feature a selectable DRL, to customize the look of your Jeep. With up to four distinct DRL modes, you can choose white and amber colors, and enable or disable the extra DRL bars (if equipped). The best part? You don’t even have to pop the hood. Our patent-pending technology allows you to program your headlights from inside the vehicle, using existing controls. No extra switches, wires, or controllers required! \u003cstrong\u003eNOTE:\u003c\/strong\u003e The DRL will automatically display white when the low\/high beams turn on. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchback Turn Signal.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stock headlights don’t have a turn signal. Where’s the fun in that? The Elite Series headlights will flash amber any time the turn signal is activated. When you’re done making your move, they’ll switch back to the white parking light, or your selected DRL color. With the plug-and-play harness included, no wire splices are needed to add this function. Thinking about a fender chop? The Elite Max model also provides enough turn signal output to be SAE compliant, replacing your factory turn signal completely, unlike the LED strips found in most chop kits. If you’re serious about off-roading but want to stay safe, the Elite Max is the perfect solution.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot just on road! \u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003eFirst in its class, the Elite Max model includes a patent-pending Trail Light off-road lighting feature. With the same emitters found in our popular Stage Series off-road products, the top and bottom reflectors shine extra light in a wide beam, to illuminate the trail ahead. The high-power LEDs stay cool, thanks to custom-designed heatsinks. An extra switch is included to activate these Trail Lights, or they can be connected to a factory auxiliary switch, if equipped.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShow Mode.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e As if the other features weren’t enough, the Elite Max model comes with a patent-pending Show Mode. Whether you’re parked at a show or just want to be seen, you can activate the show mode any time you’re stopped. Choose between four functions: Gradual, White Strobe, Amber Strobe, or Amber\/White Strobe. Of course, there’s no need for extra controllers - simply toggle your off-road switch to easily start show mode from your cabin.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug-and-Play Installation.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e These headlights were designed to be a direct replacement for both halogen and LED-equipped Jeeps, in all trim levels. Simply remove your factory headlight assembly and ours will bolt right in its place. A plug-and-play wire harness is included to hook them up to your factory connector, and also add the turn signal connection. No splicing required! With built-in adjusters, the lamps can be aimed using the provided adjustment tool. For Sport owners, a simple add-a-fuse is included to provide the DRL function. Elite Max customers will also receive an extra braided wiring harness, for the off-road and show mode feature! This harness includes a toggle switch, or you can connect it to a factory auxiliary switch, if equipped.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembled with Quality - in the USA.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Most OEM headlights are made in the US, but nearly all aftermarket headlights are assembled overseas. There’s a reason for that - quality control counts, and the OEMs know it. We’re working to break that mold, and deliver headlights with the same quality you’ll find from the factory. Elite Series headlights are proudly assembled in the USA using OEM-grade materials, including a cast aluminum driver and heatsinks, UV-coated outer lens, aluminum-core circuit boards, and automotive-grade LED emitters. After being assembled by our team in St. Louis, Missouri, they are robotically sealed and individually pressure-tested for long-lasting protection against moisture, before being packaged in custom foam for safe transportation. No expense has been spared, from materials to assembly, right here in America.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability - Backed for 8 Years.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Like our popular Stage Series lineup, Elite LED headlights have been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like the factory components on your vehicle. With integrated moisture-proof vents, the lamps can “breathe” with changes in temperature, maintaining a strong seal over time. And with built-in circuit protection for voltage spikes and reverse polarity, these lights will keep working for years. They are backed by an industry-leading 8-year limited warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/span\u003e\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Elite Max","offer_id":67721798484117,"sku":"DD5165","price":959.96,"currency_code":"USD","in_stock":true},{"title":"Elite","offer_id":67721798516885,"sku":"DD5166","price":719.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd5165_jeep_jl_elite_max_pair_offroad_lowbeam_signal_usa_elite_1.jpg?v=1792098010"},{"product_id":"elite-series-fog-lamps-for-2007-2018-jeep-jk-wrangler-pair","title":"Elite Series Fog Lamps for 2007-2018 Jeep JK Wrangler (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance OEM-grade replacement for Jeep JK Wrangler\u003c\/li\u003e\n\u003cli\u003eCustom-engineered optic provides extremely wide, intense light output\u003c\/li\u003e\n\u003cli\u003eDistinctive integrated amber backlight\u003c\/li\u003e\n\u003cli\u003eRoad-legal fog light (SAE F3 compliant)\u003c\/li\u003e\n\u003cli\u003ePlug and play main beam, no modification needed\u003c\/li\u003e\n\u003cli\u003eEngineered and assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFactory fog lights are built to meet minimum output requirements. Every aftermarket design available provides similar lackluster performance, but with an LED. The focus has been on LED appearance, not increased output. There has never been an aftermarket fog light designed from the ground up for performance - until now.\u003c\/p\u003e\n\u003cp\u003eIntroducing the Elite Series Fog Lamps: the first OE-style fog lights that were designed for true performance. With a custom-engineered patent-pending optic, multi-die automotive emitters, and high-power full-copper circuit boards, the Elite Series fog light for the Jeep JK Wrangler delivers up to 5 times more output than halogen lamps. With a plug-and-play installation, this is one of the easiest and most effective upgrades you can make to improve your visibility in inclement weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput that Outperforms. \u003c\/strong\u003eThe Elite Series Fog Lamp is built around a highly-engineered single-piece PMMA lens. This optic was carefully designed using advanced optical simulation software to produce a light pattern that is wider than any other aftermarket fog lamp on the market, with an 80-degree spread of highly intense light. Even with this extremely wide band of light, the pattern is extremely smooth throughout, with an extremely sharp cutoff to avoid glare to other drivers, including a BMW-style “color flicker” at the very edge of the pattern. Diode Dynamics engineers accomplished all this while still meeting SAE F3 fog light standards, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Elite_Series_Foglamps_-_Comparision_Images_B.jpg\" alt=\"SS3 Beam Patterns\" width=\"639\" height=\"170\"\u003e\u003c\/p\u003e\t\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003eThe white is a 6000K color temperature, which is a true cool white output. This will perfectly match other LEDs on your vehicle, such as DRLs or running lights. The white option also offers a premium BMW-style color band at the very top of the beam pattern.\u003c\/p\u003e\n\u003cp\u003eThe selective yellow option is 3000K in color temperature, which is great for high contrast in inclement weather, or in providing a distinctive look on the road. The yellow lamp consists of a yellow multi-die LED emitter paired with a yellow-tinted lens, to provide unmatched output and optical efficiency, even with the intense yellow output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eAll Elite Series Fog Lamps come standard with an integrated amber accent light. This backlight feature fully illuminates the main lens with amber LEDs, intended to match other position, sidemarker, or corner lights on your JK Wrangler. This feature can be wired to any constant 12-volt source for your desired vehicle function, using the included tap connector. It will shut off automatically if the main beam is activated. Check local laws and regulations for acceptable use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-On Fitment. \u003c\/strong\u003eElite Series Fog Lamps were designed using a 3D scanner and installed on the vehicle in our testing garage, so you can rest assured they will be a perfect fit. They can be installed on your Jeep JK Wrangler in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place, using sturdy glass-fiber-reinforced brackets. With built-in adjustment, the lamps can be aimed after installation. To wire them up, a pair of waterproof plug-and-play adapters are included to connect the lights to your factory bulb sockets. Click here to learn how to aim your Elite Series Foglamps: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=p5RXq28ZOYo\" target=\"_blank\"\u003e\u003cspan style=\"color: #c00000\"\u003eHow to Aim Your Fog Lights\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembled with Quality - in the USA. \u003c\/strong\u003eElite Series Fog Lamps are assembled in the USA using OEM-grade materials, including a precision aluminum casting, UV-coated outer lens, copper-core circuit board, and multi-die automotive emitters. After being assembled by Diode Dynamics in St. Louis, Missouri, they are robotically sealed with urethane epoxy for long-lasting protection against moisture, and packaged in form-fit foam for safe transportation. No expense has been spared, from materials to assembly, right here in America.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability - Backed for 8 Years. \u003c\/strong\u003eLike our popular Stage Series lineup, Elite Series LED lamps have been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components on your JK Wrangler. With integrated moisture-proof vents, the lamps can “breath” with changes in temperature, maintaining a strong seal over time. And with built-in circuit protection for voltage spikes and reverse polarity, these lights will keep working for years. They are backed by an industry-leading 8 year limited warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Yellow (3000K) \/ Plastic Bumper","offer_id":67721800220821,"sku":"DD5131P","price":207.96,"currency_code":"USD","in_stock":true},{"title":"Cool White (6000K) \/ Steel Bumper","offer_id":67721800253589,"sku":"DD5163P","price":247.96,"currency_code":"USD","in_stock":true},{"title":"Yellow (3000K) \/ Steel Bumper","offer_id":67721800286357,"sku":"DD5164P","price":247.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color (6000K\/3000K) \/ Plastic Bumper","offer_id":67721800319125,"sku":"DD5184P","price":255.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color (6000K\/3000K) \/ Steel Bumper","offer_id":67721800351893,"sku":"DD5187P","price":295.96,"currency_code":"USD","in_stock":true},{"title":"Cool White (6000K) \/ Plastic Bumper","offer_id":68010270490773,"sku":"DD5130P","price":207.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/esf-1635_148166.jpg?v=1792098044"},{"product_id":"elite-series-fog-lamps-for-2018-2026-jeep-jl-wrangler-pair","title":"Elite Series Fog Lamps for 2018-2026 Jeep JL Wrangler (pair)","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance OEM-grade replacement for Jeep JL Wrangler\u003c\/li\u003e\n\u003cli\u003eCustom-engineered optic provides extremely wide, intense light output\u003c\/li\u003e\n\u003cli\u003eDistinctive integrated amber backlight\u003c\/li\u003e\n\u003cli\u003eRoad-legal fog light (SAE F3 compliant)\u003c\/li\u003e\n\u003cli\u003ePlug and play main beam, no modification needed\u003c\/li\u003e\n\u003cli\u003eEngineered and assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eFactory fog lights are built to meet minimum output requirements. Every aftermarket design available provides similar lackluster performance, but with an LED. The focus has been on LED appearance, not increased output. There has never been an aftermarket fog light designed from the ground up for performance - until now.\u003c\/p\u003e\n\u003cp\u003eIntroducing the Elite Series Fog Lamps: the first OE-style fog lights that were designed for true performance. With a custom-engineered patent-pending optic, multi-die automotive emitters, and high-power full-copper circuit boards, the Elite Series fog light for the Jeep JL Wrangler delivers up to 5 times more output than halogen lamps. With a plug-and-play installation, this is one of the easiest and most effective upgrades you can make to improve your visibility in inclement weather.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput that Outperforms. \u003c\/strong\u003eThe Elite Series Fog Lamp is built around a highly-engineered single-piece PMMA lens. This optic was carefully designed using advanced optical simulation software to produce a light pattern that is wider than any other aftermarket fog lamp on the market, with an 80-degree spread of highly intense light. Even with this extremely wide band of light, the pattern is extremely smooth throughout, with an extremely sharp cutoff to avoid glare to other drivers, including a BMW-style “color flicker” at the very edge of the pattern. Diode Dynamics engineers accomplished all this while still meeting SAE F3 fog light standards, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Elite_Series_Foglamps_-_Comparision_Images_B.jpg\" alt=\"SS3 Beam Patterns\" width=\"639\" height=\"170\"\u003e\u003c\/p\u003e\t\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003eThe white is a 6000K color temperature, which is a true cool white output. This will perfectly match other LEDs on your vehicle, such as DRLs or running lights. The white option also offers a premium BMW-style color band at the very top of the beam pattern.\u003c\/p\u003e\n\u003cp\u003eThe selective yellow option is 3000K in color temperature, which is great for high contrast in inclement weather, or in providing a distinctive look on the road. The yellow lamp consists of a yellow multi-die LED emitter paired with a yellow-tinted lens, to provide unmatched output and optical efficiency, even with the intense yellow output.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eAll Elite Series Fog Lamps come standard with an integrated amber accent light. This backlight feature fully illuminates the main lens with amber LEDs, intended to match other position, sidemarker, or corner lights on your JL Wrangler. This feature can be wired to any constant 12-volt source for your desired vehicle function, using the included tap connector. It will shut off automatically if the main beam is activated. Check local laws and regulations for acceptable use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBolt-On Fitment. \u003c\/strong\u003eElite Series Fog Lamps were designed using a 3D scanner and installed on the vehicle in our testing garage, so you can rest assured they will be a perfect fit. They can be installed on your Jeep JL Wrangler in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place, using sturdy glass-fiber-reinforced brackets. With built-in adjustment, the lamps can be aimed after installation. To wire them up, a pair of waterproof plug-and-play adapters are included to connect the lights to your factory bulb sockets. Click here to learn how to aim your Elite Series Foglamps: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=p5RXq28ZOYo\" target=\"_blank\"\u003e\u003cspan style=\"color: #c00000\"\u003eHow to Aim Your Fog Lights\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembled with Quality - in the USA. \u003c\/strong\u003eElite Series Fog Lamps are assembled in the USA using OEM-grade materials, including a precision aluminum casting, UV-coated outer lens, copper-core circuit board, and multi-die automotive emitters. After being assembled by Diode Dynamics in St. Louis, Missouri, they are robotically sealed with urethane epoxy for long-lasting protection against moisture, and packaged in form-fit foam for safe transportation. No expense has been spared, from materials to assembly, right here in America.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability - Backed for 8 Years. \u003c\/strong\u003eLike our popular Stage Series lineup, Elite Series LED lamps have been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components on your JL Wrangler. With integrated moisture-proof vents, the lamps can “breath” with changes in temperature, maintaining a strong seal over time. And with built-in circuit protection for voltage spikes and reverse polarity, these lights will keep working for years. They are backed by an industry-leading 8 year limited warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Yellow (3000K) \/ Plastic Bumper","offer_id":67721808543893,"sku":"DD5131P","price":207.96,"currency_code":"USD","in_stock":true},{"title":"Cool White (6000K) \/ Steel Bumper","offer_id":67721808576661,"sku":"DD5163P","price":247.96,"currency_code":"USD","in_stock":true},{"title":"Yellow (3000K) \/ Steel Bumper","offer_id":67721808609429,"sku":"DD5164P","price":247.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color (6000K\/3000K) \/ Plastic Bumper","offer_id":67721808642197,"sku":"DD5184P","price":255.96,"currency_code":"USD","in_stock":true},{"title":"Dual-Color (6000K\/3000K) \/ Steel Bumper","offer_id":67721808674965,"sku":"DD5187P","price":295.96,"currency_code":"USD","in_stock":true},{"title":"Cool White (6000K) \/ Plastic Bumper","offer_id":68010281894037,"sku":"DD5130P","price":207.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2018_jeep_wrangler_jl_elite_foglamp_studio_close_driver_on.jpg?v=1792098102"},{"product_id":"fog-light-leds-for-1997-2006-jeep-wrangler-pair","title":"Fog Light LEDs for 1997-2006 Jeep Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Jeep Wrangler fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Jeep Wrangler. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Jeep Wrangler are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your Wrangler without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Cool White (6000K)","offer_id":67721813000341,"sku":"DD0471P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"Yellow (3000K)","offer_id":67721813033109,"sku":"DD0472P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0471p_sl2_h3_white_pair_fog_c_gnsmvge1iz1naagn_f8519382-c01d-4b12-8d9e-da6c2425b773.jpg?v=1792098103"},{"product_id":"fog-light-leds-for-2007-2009-jeep-wrangler-pair","title":"Fog Light LEDs for 2007-2009 Jeep Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Jeep Wrangler fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Jeep Wrangler. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Jeep Wrangler are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your Wrangler without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48 \/ Cool White (6000K)","offer_id":67721849766037,"sku":"DD0151P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Cool White (6000K)","offer_id":67721849798805,"sku":"DD0156P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Cool White (6000K)","offer_id":67721849831573,"sku":"DD0463P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Yellow (3000K)","offer_id":67721849864341,"sku":"DD0464P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0463p_sl2_9005_9011_h10_white_pair_fog_c_3wnlsd9zdr19o6d4_aeea44c0-e0a7-45cd-98e9-9733f74a1726.jpg?v=1792098218"},{"product_id":"fog-light-leds-for-2010-2017-jeep-wrangler-pair","title":"Fog Light LEDs for 2010-2017 Jeep Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Jeep Wrangler fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Jeep Wrangler. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Jeep Wrangler are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your Wrangler without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48 \/ Cool White (6000K)","offer_id":67721870344341,"sku":"DD0167P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Cool White (6000K)","offer_id":67721870377109,"sku":"DD0173P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Cool White (6000K)","offer_id":67721870409877,"sku":"DD0477P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Yellow (3000K)","offer_id":67721870442645,"sku":"DD0478P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0477p_sl2_5202_psx24w_white_pair_fog_c_opmdpg5xtb4oneup_076a7df1-73b4-431a-b300-86d4e98818d8.jpg?v=1792098274"},{"product_id":"fog-light-leds-for-2018-2026-jeep-jl-wrangler-pair","title":"Fog Light LEDs for 2018-2026 Jeep JL Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Jeep Wrangler fog light bulbs.\u003c\/li\u003e \u003cli\u003eAvailable in white or selective yellow.\u003c\/li\u003e \u003cli\u003eAutomotive-grade LEDs for superior performance.\u003c\/li\u003e \u003cli\u003eFanless design provides high reliability.\u003c\/li\u003e \u003cli\u003eCompact fitment with integrated driver.\u003c\/li\u003e \u003cli\u003eDesigned and engineered in USA (Patents Pending).\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003eWith its fanless design and white or selective yellow color options, the SLF LED has been a popular choice for anyone looking for an upgrade, especially in fog light applications. We're excited to introduce its successor: the SL2 LED! The SL2 features a number of upgrades, including a more compact design, internal driver, and improved reliability. The all-new SL2 LED bulb is a direct plug-and-play replacement, providing a significant upgrade in performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eModern Foglights.\u003c\/strong\u003e Replacement LED bulbs are a great way to improve the look of the fog lights on your Jeep Wrangler. Whether you're matching the headlights, replacing worn-out standard bulbs, or just adding some style, this is one of the easiest and most effective upgrades you can make for the overall lighting setup on your Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eOptimized Optical Focus. \u003c\/strong\u003eDon't be fooled by high lumen numbers. The fog lights on your Jeep Wrangler are designed to focus light. If the light source in the housing is out of focus, it doesn't matter how bright it is. You won't have a focused hotspot of light to shine down the road where you need it, you'll just have more glare. To fix this, the SL2 LED bulb was engineered to focus light from the same location as the original bulb, preserving the focus and hotspot, with no added glare. It produces a functional beam pattern, with a stronger hotspot for added distance and visibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFanless Design. \u003c\/strong\u003eYou may have seen bulbs that use large straps for cooling, or big fans that just make noise. Instead, the SL2 was designed as a compact, fanless solution. But that doesn't mean it's low-power! At 14 watts, the SL2 LED bulb still provides plenty of output thanks to a copper-core circuit board and a thermally-optimized full-metal housing with integrated heatsink. The result is a highly-effective and reliable cooling system, keeping the bulb running at maximum potential without the need for a fan.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCompact Size. \u003c\/strong\u003eThe SL2 LED bulb is compact in size, not much bigger than a traditional bulb. The integrated internal driver allows the bulbs to easily fit inside the housing on your Wrangler without the need to tuck a driver away. Installation is easy - simply remove the original bulb, and the SL2 will fit in its place, and plug right in.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite or Yellow. \u003c\/strong\u003eThe SL2 is available in 6000K Cool White or Selective Yellow. The 6000K Cool White color temperature provides a more modern appearance and matches most OEM lighting, while the unique Selective Yellow color is great for high contrast, which some find beneficial in inclement weather. Both color options use multi-die automotive-grade LED emitters for superior performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare. If you're looking for the maximum output available, we strongly recommend the SL2 LED, which is a bulb specifically designed for fog lamp applications.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eEvery part of the SL2 LED was designed for reliability, from the custom wiring, to the exclusive aluminum castings, to the integrated driver with built-in circuit protection. The SL2 was put through its paces in our environmental testing chambers - where the bulb successfully performed through dozens of thermal cycles, from -40 through 85 degrees Celsius (-40 to 185F). Whether you're in the Sahara or northern Canada, the SL2 will keep performing for years. It's even compatible up to 30V! We're so confident in the SL2's reliability, that it's backed by an industry-leading limited LIFETIME warranty. See details at \u003ca href=\"https:\/\/www.diodedynamics.com\/warranty\"\u003ediodedynamics.com\/warranty\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP48 \/ Cool White (6000K)","offer_id":67721899442325,"sku":"DD0167P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Cool White (6000K)","offer_id":67721899475093,"sku":"DD0173P","price":79.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Cool White (6000K)","offer_id":67721899507861,"sku":"DD0477P","price":111.96,"currency_code":"USD","in_stock":true},{"title":"SL2 \/ Yellow (3000K)","offer_id":67721899540629,"sku":"DD0478P","price":111.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0477p_sl2_5202_psx24w_white_pair_fog_c_opmdpg5xtb4oneup_0ac229c9-be7d-4d96-a925-052533097c59.jpg?v=1792098346"},{"product_id":"front-turn-signal-leds-for-1997-2006-jeep-wrangler-pair","title":"Front Turn Signal LEDs for 1997-2006 Jeep Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3157 bulb size\u003c\/li\u003e \u003cli\u003eGreater output than factory bulbs\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Jeep Wrangler illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDual Brightness. \u003c\/strong\u003eThe Wrangler uses a 3157 dual-filament bulb. They light up with low power as parking lights, then they get brighter when the turn signal or hazards are activated. The brightness ratio of your factory bulbs is traditionally 15:100, or 15% lumen output for the dim function. Diode Dynamics bulbs are designed to match this, so there is enough distinction between \"low\" and \"high\" brightness levels. As with all Diode Dynamics LED bulbs, these turn signal bulbs are rated with accurate, measured lumen figures, not calculations or guesses. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchback. \u003c\/strong\u003eThe dual-filament function of your factory turn signal bulbs gives you the ability to choose a unique LED bulb model: switchback! These bulbs illuminate in a bright white for the \"low\" power setting for your running\/parking light, then switch to intense amber when the turn signals are activated. When the turn signal is switched off, they return to the original white output. The result is a modern dual-color effect, as seen on many high-end vehicles on the road. Please note: in order to properly see the white, you must have clear reflectors\/lenses over the turn signal bulb. If your Wrangler has amber reflectors, you might be able to find clear aftermarket ones to complete this upgrade!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Wrangler looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Wrangler, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67721918677141,"sku":"DD0050P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67721918709909,"sku":"DD0055P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67721918742677,"sku":"DD0058P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/frnturn-1631_121785.jpg?v=1792098373"},{"product_id":"front-turn-signal-leds-for-2007-2017-jeep-wrangler-pair","title":"Front Turn Signal LEDs for 2007-2017 Jeep Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3157 bulb size\u003c\/li\u003e \u003cli\u003eGreater output than factory bulbs\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Jeep Wrangler illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDual Brightness. \u003c\/strong\u003eThe Wrangler uses a 3157 dual-filament bulb. They light up with low power as parking lights, then they get brighter when the turn signal or hazards are activated. The brightness ratio of your factory bulbs is traditionally 15:100, or 15% lumen output for the dim function. Diode Dynamics bulbs are designed to match this, so there is enough distinction between \"low\" and \"high\" brightness levels. As with all Diode Dynamics LED bulbs, these turn signal bulbs are rated with accurate, measured lumen figures, not calculations or guesses. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchback. \u003c\/strong\u003eThe dual-filament function of your factory turn signal bulbs gives you the ability to choose a unique LED bulb model: switchback! These bulbs illuminate in a bright white for the \"low\" power setting for your running\/parking light, then switch to intense amber when the turn signals are activated. When the turn signal is switched off, they return to the original white output. The result is a modern dual-color effect, as seen on many high-end vehicles on the road. Please note: in order to properly see the white, you must have clear reflectors\/lenses over the turn signal bulb. If your Wrangler has amber reflectors, you might be able to find clear aftermarket ones to complete this upgrade!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Wrangler looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Wrangler, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67721956688021,"sku":"DD0050P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP24 \/ Switchback Cool White and Amber","offer_id":67721956720789,"sku":"DD0053P","price":63.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67721956753557,"sku":"DD0055P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67721956786325,"sku":"DD0058P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0058p_3157_xp80_amber_pair_8.jpg?v=1792098481"},{"product_id":"front-turn-signal-leds-for-2018-2026-jeep-jl-wrangler-sport-pair","title":"Front Turn Signal LEDs for 2018-2026 Jeep JL Wrangler Sport (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler Sport front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 7443 bulb size\u003c\/li\u003e \u003cli\u003eGreater output than factory bulbs\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Jeep Wrangler Sport illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Wrangler Sport.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDual Brightness. \u003c\/strong\u003eThe Wrangler Sport uses a 7443 dual-filament bulb. They light up with low power as parking lights, then they get brighter when the turn signal or hazards are activated. The brightness ratio of your factory bulbs is traditionally 15:100, or 15% lumen output for the dim function. Diode Dynamics bulbs are designed to match this, so there is enough distinction between \"low\" and \"high\" brightness levels. As with all Diode Dynamics LED bulbs, these turn signal bulbs are rated with accurate, measured lumen figures, not calculations or guesses. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchback. \u003c\/strong\u003eThe dual-filament function of your factory turn signal bulbs gives you the ability to choose a unique LED bulb model: switchback! These bulbs illuminate in a bright white for the \"low\" power setting for your running\/parking light, then switch to intense amber when the turn signals are activated. When the turn signal is switched off, they return to the original white output. The result is a modern dual-color effect, as seen on many high-end vehicles on the road. Please note: in order to properly see the white, you must have clear reflectors\/lenses over the turn signal bulb. If your Wrangler Sport has amber reflectors, you might be able to find clear aftermarket ones to complete this upgrade!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Wrangler Sport looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Wrangler Sport, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler Sport. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Amber","offer_id":67721991389333,"sku":"DD0107P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Amber","offer_id":67721991422101,"sku":"DD0111P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Amber","offer_id":67721991454869,"sku":"DD0114P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/7443_xp80_amber_pair_titled_1_36.jpg?v=1792098585"},{"product_id":"front-turn-signal-drl-led-bulbs-for-2018-2026-jeep-jl-wrangler-sport-s-sahara-rubicon-four","title":"Front Turn Signal\/DRL LED Bulbs for 2018-2026 Jeep JL Wrangler Sport S \/ Sahara \/ Rubicon (four)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for factory incandescent bulb\u003c\/li\u003e \u003cli\u003eIncreased output with LED Appearance\u003c\/li\u003e \u003cli\u003ePlug and play, simple installation\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eUpgrade. \u003c\/strong\u003eAdd a modern appearance to your vehicle with these replacement LED bulbs. These bright LEDs are available in a number of colors including cool white, to replace the factory yellowish incandescent bulbs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eThis kit is available in two different brightness levels. The Stage 1 option is a good choice if you're looking for a simple change of color, and slightly brighter output than your factory bulbs. For the highest increase in light output from your factory bulbs, we'd recommend the Stage 2 option!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eStage 1:\u003c\/strong\u003e 500 lumens\u003cbr\u003e\u003cstrong\u003eStage 2:\u003c\/strong\u003e 1,210 lumens (\u003cem\u003eThe Stage 2 option only functions as a parking light \u003cstrong\u003eOR\u003c\/strong\u003e DRL. It will not function as both.\u003c\/em\u003e)\u003c\/p\u003e\n\u003cp\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eUnlike other bulbs on the market, Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Stage 1 (500 lumens) \/ Cool White and Amber","offer_id":67721995124885,"sku":"DD0421","price":71.96,"currency_code":"USD","in_stock":true},{"title":"Stage 2 (1,210 lumens) \/ Cool White and Amber","offer_id":67721995157653,"sku":"DD0422","price":151.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0422_jeep_jl_wrangler_front_turn_stage_2_xpr_-_titled.jpg?v=1792098579"},{"product_id":"hd-led-halos-for-2007-2018-jeep-jk-wrangler-pair","title":"HD LED Halos for 2007-2018 Jeep JK Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e \u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e \u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e \u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e \u003cli\u003eAssembled in USA\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eHDHalo Technology.\u003c\/strong\u003e These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSizing:\u003c\/strong\u003e All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWiring:\u003c\/strong\u003e All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePWM Control:\u003c\/strong\u003e Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite:\u003c\/strong\u003e White Low Power, 50% brightness\u003cbr\u003e\u003cstrong\u003eRed:\u003c\/strong\u003e White High Power, 100% brightness\u003cbr\u003e\u003cstrong\u003eYellow: \u003c\/strong\u003eAmber Signal, double brightness, flashing (dims if powered more than two seconds)\u003cbr\u003e\u003cstrong\u003eBlack:\u003c\/strong\u003e Ground\u003c\/p\u003e \u003cp\u003eAll input wires activate the halos, at different brightness levels. \u003cstrong\u003eAll switchback halos ship with \"low\" priority drivers.\u003c\/strong\u003e This means that if \u003cstrong\u003eboth\u003c\/strong\u003e \"low\" and \"high\" power inputs are powered, the LED will light up in white, with \u003cstrong\u003elow\u003c\/strong\u003e power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up in amber color, intended for signaling. If you'd like to use amber all the time, no problem! It will dim automatically if powered for more than two seconds, to keep it safe.\u003c\/p\u003e \u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"150 \/ Red","offer_id":67722025107605,"sku":"DD2056","price":107.96,"currency_code":"USD","in_stock":true},{"title":"150 \/ Switchback Cool White and Amber","offer_id":67722025140373,"sku":"DD2068","price":107.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/hdled_halo_120mm_white.jpg?v=1792098598"},{"product_id":"hd-led-halos-for-2007-2018-jeep-jk-wrangler-fog-pair","title":"HD LED Halos for 2007-2018 Jeep JK Wrangler Fog (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e \u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e \u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e \u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e \u003cli\u003eAssembled in USA\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eHDHalo Technology.\u003c\/strong\u003e These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSizing:\u003c\/strong\u003e All sizes are listed by outside diameter, in millimeters. Width is 8mm, so inside diameter is 16mm less than outside diameter. Total height is 4.5mm.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWiring:\u003c\/strong\u003e All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePWM Control:\u003c\/strong\u003e Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite:\u003c\/strong\u003e White Low Power, 50% brightness\u003cbr\u003e\u003cstrong\u003eRed:\u003c\/strong\u003e White High Power, 100% brightness\u003cbr\u003e\u003cstrong\u003eYellow: \u003c\/strong\u003eAmber Signal, double brightness, flashing (dims if powered more than two seconds)\u003cbr\u003e\u003cstrong\u003eBlack:\u003c\/strong\u003e Ground\u003c\/p\u003e \u003cp\u003eAll input wires activate the halos, at different brightness levels. \u003cstrong\u003eAll switchback halos ship with \"low\" priority drivers.\u003c\/strong\u003e This means that if \u003cstrong\u003eboth\u003c\/strong\u003e \"low\" and \"high\" power inputs are powered, the LED will light up in white, with \u003cstrong\u003elow\u003c\/strong\u003e power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up in amber color, intended for signaling. If you'd like to use amber all the time, no problem! It will dim automatically if powered for more than two seconds, to keep it safe.\u003c\/p\u003e \u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"90 \/ Red","offer_id":67722025369749,"sku":"DD2050","price":83.96,"currency_code":"USD","in_stock":true},{"title":"90 \/ Switchback Cool White and Amber","offer_id":67722025402517,"sku":"DD2062","price":83.96,"currency_code":"USD","in_stock":true},{"title":"90 \/ Cool White (6000K)","offer_id":67722025435285,"sku":"DD2074","price":83.96,"currency_code":"USD","in_stock":true},{"title":"90 \/ Amber","offer_id":68171624644757,"sku":"DD2026","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/hdled_halo_120mm_white_4.jpg?v=1792098601"},{"product_id":"hitchmount-led-pod-reverse-kit-for-2018-2026-jeep-wrangler","title":"HitchMount LED Pod Reverse Kit for 2018-2026 Jeep Wrangler","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows you to mount an SSC1 or C1R LED pod in the Jeep Wrangler trailer hitch receiver.\u003c\/li\u003e\n\u003cli\u003eAdds a powerful reverse light, 4th brake light, and additional running light.\u003c\/li\u003e\n\u003cli\u003eSimple 5-minute installation, with no need for custom wiring or routing wires.\u003c\/li\u003e\n\u003cli\u003eOptional SafetyStrobe brake light strobing.\u003c\/li\u003e\n\u003cli\u003eDesigned and assembled in USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eAdd significantly more light output when backing up at night with our Stage Series HitchMount Reverse Light Kit! This kit allows you to mount one SSC1 or C1R LED pod in your 2-inch or 2.5-inch trailer hitch receiver, adding a high-power reverse light, additional running light, and an optional 4th brake light with the C1R option. With the included wiring harness, this kit connects to the Jeep Wrangler's factory trailer hitch wiring for simple, everyday operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrighter Backup.\u003c\/strong\u003e Factory reverse bulbs just don't provide enough light output to back up at night confidently. By pairing our patented TIR optics with high-powered LEDs, the SSC1 and C1R included in this kit provide an additional reverse light that's several times brighter than stock bulbs alone. Plus, they automatically come on when the vehicle is put in reverse!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Running Light.\u003c\/strong\u003e The Stage Series LED pods included with this kit feature a distinctive red backlight that can be used as an additional running light during use! The backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafetyStrobe 4th Brake Light.\u003c\/strong\u003e The C1R option features a high-power red function to serve as a powerful 4th brake light, along with the low-power running light. The high-power red functionality activates anytime you apply your brakes, adding a 4th brake light to your Wrangler.\u003c\/p\u003e\n\u003cp\u003eThe C1R also features optional brake light strobing, which can be activated in 15-second intervals. By default, the C1R will flash three times when the brake lights are initially applied, for greater visibility. The SafetyStrobe feature can be easily disabled if desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEveryday Operation.\u003c\/strong\u003e This kit is completely plug-and-play with all 7-pin trailer connectors. The included harness plugs right into your factory trailer hitch wiring for easy installation and operation. The kit operates as an additional red running light with your tail lights, and then automatically switches to a high-power backup light when your vehicle is in reverse. The high-power 4th brake light feature included with the C1R will activate anytime you apply your brakes. If you would like to have override functionality to manually turn on the reverse light anytime, you will need to purchase the universal backup harness.\u003c\/p\u003e\n\u003cp\u003eIf your trailer connector is not 7-pin, this kit will still work for you but will require slight modification to the harness.\u003c\/p\u003e\n\u003cp\u003eSome newer trucks feature advanced trailer safety systems that automatically detect when a trailer is connected. To ensure compatibility, each HitchMount kit includes an optional red wire that can tap into your tail light’s brake signal, preventing trailer warnings or dashboard alerts for hassle-free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple Installation.\u003c\/strong\u003e The patent-pending snap-fit design allows you to install this mount in minutes, without any drilling or need for a hitch pin. Simply insert the HitchMount into your trailer hitch receiver and the snap-fit side mounts will snap into place. Installation couldn't be easier and takes less than five minutes!\u003c\/p\u003e\n\u003cp\u003eThis kit is ideal for anyone who uses their trailer hitch often since removal can be done in minutes as well! Simply unplug the harness, press the snap-fit pins and remove the mount. The included DT connector cover protects the harness from dirt and moisture when the HitchMount is not in use. When you're not using your hitch for towing, you can quickly reinstall the HitchMount and plug it back in.\u003c\/p\u003e\n\u003cp\u003eIf you would like to use a locking trailer pin to install this kit instead of the snap-fit pins, you can do so with a quick modification. \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=yr3GmX8EFvg\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eWatch the video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in our Stage Series pods collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the Stage Series LED pods serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of our pods is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output.\u003c\/strong\u003e All Stage Series beam patterns were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood \u003c\/strong\u003epattern was designed to provide uniform, even illumination with a full 50x50 degree spread of light on the SSC1 and C1R LED pod. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"C1","offer_id":67722062233749,"sku":"DD7420","price":97.96,"currency_code":"USD","in_stock":true},{"title":"C1R + Brake","offer_id":67722062266517,"sku":"DD7422","price":139.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2018_jeep_c1r_hitchmount_studio_cropped_angle_off_eoc01yqfilhjr2gy.jpg?v=1792098790"},{"product_id":"interior-led-conversion-kit-for-2007-2018-jeep-jk-wrangler","title":"Interior LED Conversion Kit for 2007-2018 Jeep JK Wrangler","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eIncludes all the LEDs you need to replace the interior incandescent bulbs\u003c\/li\u003e \u003cli\u003eIncreased output with LED appearance\u003c\/li\u003e \u003cli\u003ePlug-and-play, simple installation\u003c\/li\u003e \u003cli\u003eAvailable in multiple colors and brightness levels.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eUpgrade. \u003c\/strong\u003eAdd a modern appearance to your Jeep JK Wrangler with this Interior LED Conversion Kit. This kit includes all the LEDs you need to replace the factory map, dome, and license plate incandescent bulbs. These bright LEDs are available in a number of colors including cool white, red, and blue, to match your unique style.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eThis kit is available in two different brightness levels. The Stage 1 option is a good choice if you’re looking for a simple change of color, and slightly brighter output than your factory bulbs. For the highest increase in light output from your factory bulbs, we'd recommend the Stage 2 option!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eStage 1:\u003c\/strong\u003e 460 lumens\u003cbr\u003e\u003cstrong\u003eStage 2:\u003c\/strong\u003e 560 lumens\u003c\/p\u003e\n\u003cp\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eUnlike other bulbs on the market, Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"Stage 1 (460 lumens) \/ Cool White (6000K)","offer_id":67722064003221,"sku":"DD0363","price":35.96,"currency_code":"USD","in_stock":true},{"title":"Stage 2 (560 lumens) \/ Cool White (6000K)","offer_id":67722064035989,"sku":"DD0364","price":47.96,"currency_code":"USD","in_stock":true},{"title":"Stage 1 (460 lumens) \/ Blue","offer_id":67722064068757,"sku":"DD0365","price":35.96,"currency_code":"USD","in_stock":true},{"title":"Stage 2 (560 lumens) \/ Blue","offer_id":67722064101525,"sku":"DD0366","price":47.96,"currency_code":"USD","in_stock":true},{"title":"Stage 1 (460 lumens) \/ Red","offer_id":67722064134293,"sku":"DD0367","price":35.96,"currency_code":"USD","in_stock":true},{"title":"Stage 2 (560 lumens) \/ Red","offer_id":67722064167061,"sku":"DD0368","price":50.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0363-jeep_jk_interior_kit_white_stage_1_1.jpg?v=1792098820"},{"product_id":"license-plate-led-for-2007-2018-jeep-jk-wrangler-one","title":"License Plate LED for 2007-2018 Jeep JK Wrangler (one)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Jeep JK Wrangler license plate bulbs\u003c\/li\u003e \u003cli\u003eIncreased output with modern LED appearance\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eUpgrade. \u003c\/strong\u003eAdd a modern appearance to your Jeep JK Wrangler with these replacement LED bulbs! These bright LEDs are available in a number of colors including cool white, to replace the factory yellowish incandescent bulbs. If you've been looking for a simple way to upgrade your JK Wrangler, you've found it!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_License.jpg\" alt=\"License Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your JK Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Warm White (3000K)","offer_id":67722071802005,"sku":"DD0020S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Natural White (4000K)","offer_id":67722071834773,"sku":"DD0021S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Pure White (5000K)","offer_id":67722071867541,"sku":"DD0022S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67722071900309,"sku":"DD0024S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67722071933077,"sku":"DD0027S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Natural White (4000K)","offer_id":67722071965845,"sku":"DD0028S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Pure White (5000K)","offer_id":67722071998613,"sku":"DD0029S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67722072031381,"sku":"DD0031S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Warm White (3000K)","offer_id":67722072064149,"sku":"DD0035S","price":4.76,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Cool White (6000K)","offer_id":67722072096917,"sku":"DD0037S","price":4.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0028s_194_hp5_natural_white_single_license_titled_1.jpg?v=1792098847"},{"product_id":"map-light-leds-for-2007-2018-jeep-jk-wrangler-pair","title":"Map Light LEDs for 2007-2018 Jeep JK Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern cool white appearance, or choose your color\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep JK Wrangler map light bulb\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eThis replacement LED bulb is a great way to improve the look and function of the map lights on your Jeep JK Wrangler. They'll provide a modern, premium appearance compared to the original incandescent bulb. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the JK Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_Map.jpg\" width=\"750\" height=\"150\" alt=\"Map Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your JK Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Amber","offer_id":67722287677589,"sku":"DD0018P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Blue","offer_id":67722287710357,"sku":"DD0019P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Warm White (3000K)","offer_id":67722287743125,"sku":"DD0020P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Natural White (4000K)","offer_id":67722287775893,"sku":"DD0021P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Pure White (5000K)","offer_id":67722287808661,"sku":"DD0022P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Red","offer_id":67722287841429,"sku":"DD0023P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67722287874197,"sku":"DD0024P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Amber","offer_id":67722287906965,"sku":"DD0025P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Blue","offer_id":67722287939733,"sku":"DD0026P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67722287972501,"sku":"DD0027P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Natural White (4000K)","offer_id":67722288005269,"sku":"DD0028P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Pure White (5000K)","offer_id":67722288038037,"sku":"DD0029P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Red","offer_id":67722288070805,"sku":"DD0030P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67722288103573,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Amber","offer_id":67722288136341,"sku":"DD0032P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Blue","offer_id":67722288169109,"sku":"DD0033P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Green","offer_id":67722288201877,"sku":"DD0034P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Warm White (3000K)","offer_id":67722288234645,"sku":"DD0035P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Red","offer_id":67722288267413,"sku":"DD0036P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Cool White (6000K)","offer_id":67722288300181,"sku":"DD0037P","price":7.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0028p_194_hp5_natural_white_pair_map_titled_16.jpg?v=1792099297"},{"product_id":"rear-turn-tail-light-leds-for-1997-2006-jeep-wrangler-pair","title":"Rear Turn\/Tail Light LEDs for 1997-2006 Jeep Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler tail\/rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 1157 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eInstant On and Off. \u003c\/strong\u003eThe factory incandescent tail lights and rear turn signals on the Jeep Wrangler illuminate in a slow glow, taking a moment to turn off and on. A modern LED upgrade provides instant response, which can alert other drivers on the road earlier, while also providing a modern LED appearance. This instant activation adds a modern and distinct look to the Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Tail_Light_-_Comparision_Image.jpg\" alt=\"Tail\/Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eSince the lens on your tail light housing is red, you'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. Red is the correct emitter color for maximum turn signal output on your Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Wrangler looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Wrangler, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Red","offer_id":67722481533077,"sku":"DD0011P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722481565845,"sku":"DD0014P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67722481598613,"sku":"DD0016P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/tail-1631_107952.jpg?v=1792099611"},{"product_id":"rear-turn-tail-light-leds-for-2007-2017-jeep-wrangler-pair","title":"Rear Turn\/Tail Light LEDs for 2007-2017 Jeep Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler tail\/rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3157 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eInstant On and Off. \u003c\/strong\u003eThe factory incandescent tail lights and rear turn signals on the Jeep Wrangler illuminate in a slow glow, taking a moment to turn off and on. A modern LED upgrade provides instant response, which can alert other drivers on the road earlier, while also providing a modern LED appearance. This instant activation adds a modern and distinct look to the Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Tail_Light_-_Comparision_Image.jpg\" alt=\"Tail\/Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eSince the lens on your tail light housing is red, you'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. Red is the correct emitter color for maximum turn signal output on your Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Wrangler looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Wrangler, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Red","offer_id":67722482155669,"sku":"DD0051P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722482188437,"sku":"DD0056P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67722482221205,"sku":"DD0059P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/3157_xp80_red_2_pack_1.jpg?v=1792099611"},{"product_id":"rgbw-hd-led-halos-for-2018-2026-jeep-jl-wrangler-pair","title":"RGBW HD LED Halos for 2018-2026 Jeep JL Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdds RGBW multicolor functionality to DRLs.\u003c\/li\u003e \u003cli\u003eComputer-designed LED Halos for 2018+ Jeep JL Wrangler with premium headlights.\u003c\/li\u003e \u003cli\u003eReplaces illuminated light pipe inside the headlight.\u003c\/li\u003e \u003cli\u003e132 high-power LEDs per halo.\u003c\/li\u003e \u003cli\u003eSmartphone control with optional \u003ca href=\"https:\/\/www.diodedynamics.com\/bluetooth-rgbw-controller.html\"\u003eBluetooth Controller\u003c\/a\u003e.\u003c\/li\u003e \u003cli\u003eConstant-current, high-power driver modules.\u003c\/li\u003e \u003cli\u003eDesigned and assembled in the USA.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eTime for an upgrade!\u003c\/strong\u003e This RGBW halo kit has been designed specifically for the 2018-2022 Jeep JL Wrangler. It includes custom-sized halo rings that will give you full multicolor functionality over your DRLs. These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. They will add a distinct, unique look to your Jeep both day and night!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eRGBW. \u003c\/strong\u003eThis product is not just RGB, it is RGBW! That means there is an extra LED chip that is specifically white in color, right next to the standard red, green, and blue LEDs. By using an RGBW controller, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals so you can keep a clean, factory white appearance for everyday driving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWiring.\u003c\/strong\u003e All wires have a durable covering. The LED has a 20-inch wire with a female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"RGBW™ Multicolor and White","offer_id":67722531864725,"sku":"DD2290","price":159.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2018_jeep_jl_wrangler_rgbw_halo_close_green_2_1.jpg?v=1792099746"},{"product_id":"sidemarker-leds-for-1997-2017-jeep-wrangler-pair","title":"Sidemarker LEDs for 1997-2017 Jeep Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED illumination\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler sidemarker light bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Upgrade. \u003c\/strong\u003eThese replacement LED bulbs are a great way to improve the function and longevity of the sidemarkers on your Jeep Wrangler. They'll provide modern illumination with long lifespan compared to the original incandescent bulbs. The installation is straightforward, with just a bulb swap - making it a simple upgrade for the Wrangler's lighting setup.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eChoose Your Color. \u003c\/strong\u003eYou'll see that there are multiple color options for these bulbs. Please select what you need for your setup! If you have amber lenses in the front, select amber bulbs in order to maximize output. If you have clear front reflectors, like found in many aftermarket headlamps, you can use white or amber bulbs. For the rear, you'll always want to select red bulbs.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFront and Rear. \u003c\/strong\u003eThis listing includes one pair of bulbs. If you need both front and rear bulbs, please add one of each to your cart in each respective color. You'll always need red in the rear, and amber or white bulbs are for the front of the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Amber","offer_id":67722556276885,"sku":"DD0018P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Warm White (3000K)","offer_id":67722556309653,"sku":"DD0020P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67722556342421,"sku":"DD0024P","price":11.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Amber","offer_id":67722556375189,"sku":"DD0025P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67722556407957,"sku":"DD0027P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67722556440725,"sku":"DD0031P","price":19.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Amber","offer_id":67722556473493,"sku":"DD0032P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Warm White (3000K)","offer_id":67722556506261,"sku":"DD0035P","price":7.96,"currency_code":"USD","in_stock":true},{"title":"SMD2 \/ Cool White (6000K)","offer_id":67722556539029,"sku":"DD0037P","price":7.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0025p-194_hp5_amber-pair_sidemarker_titled_2.jpg?v=1792099797"},{"product_id":"ss3-led-fog-light-kit-for-2007-2018-jeep-jk-wrangler","title":"SS3 LED Fog Light Kit for 2007-2018 Jeep JK Wrangler","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for Jeep JK Wrangler fog lamps\u003c\/li\u003e\n\u003cli\u003eSAE-compliant road-legal output\u003c\/li\u003e\n\u003cli\u003eIncludes round bezel, for factory-style appearance\u003c\/li\u003e\n\u003cli\u003ePlug and play, no modification needed\u003c\/li\u003e\n\u003cli\u003eAdvanced TIR optics provide high efficiency and focus\u003c\/li\u003e\n\u003cli\u003eDurable powdercoated aluminum die-cast\u003c\/li\u003e\n\u003cli\u003eEngineered and Assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOverview. \u003c\/strong\u003eUpgrade the fog lights on your Jeep JK Wrangler with our SS3 Fog Light Bracket Kit! Featuring higher output intensity than any other 3” light on the market, these LED pods have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a durable package. With the included round bezel, the SS3 Fog Kit has a clean, factory-style appearance, only much brighter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug and Play. \u003c\/strong\u003eThanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed on your Jeep JK Wrangler in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place! Wire adapters are included to connect the lights to your factory bulb sockets - no additional wiring needed!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SS3 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SS3 serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the SS3 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Compliant. \u003c\/strong\u003eAll Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it’s great for general illumination as well. Rather than a traditional \"spot\" pattern, the Stage Series Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"FineLine Optic\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog \u003c\/strong\u003e uses our distinctive FineLine optic design, and provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle. Choose cool white, selective yellow, or Dual-Color output to match your needs and the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_C1_Beam_Patterns_-_SAE_Fog_Standard_Description_B_1.jpg\" alt=\"SS3 Beam Patterns\" width=\"785\" height=\"272\"\u003e\u003c\/p\u003e\n\u003cp\u003eWhen installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving\/Auxiliary High Beam Light, and the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eThe Stage Series 3\" LED Pod features a distinctive backlight, in a brilliant amber color. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMultiple Power Levels. \u003c\/strong\u003eStage Series LED pods are available in several power levels to suit your needs. Sport provides dependable performance and is a great entry-level upgrade. Dual-Color delivers output between Sport and Pro, with selectable white and yellow SAE fog output in a single lamp. Pro steps up the intensity for greater visibility, while Max delivers the highest output available for those seeking maximum performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS3_LED_Pod_-_Comparsion_Images_Map.jpg\" width=\"641\" height=\"171\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SS3 Sport \/ White SAE Fog \/ Plastic Bumper","offer_id":67722779295893,"sku":"DD7044","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ Yellow SAE Fog \/ Plastic Bumper","offer_id":67722779328661,"sku":"DD7045","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ White SAE Fog \/ Plastic Bumper","offer_id":67722779361429,"sku":"DD7047","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ Yellow SAE Fog \/ Plastic Bumper","offer_id":67722779394197,"sku":"DD7048","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ White SAE Fog \/ Plastic Bumper","offer_id":67722779426965,"sku":"DD7049","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ Yellow SAE Fog \/ Plastic Bumper","offer_id":67722779459733,"sku":"DD7050","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ White SAE Fog \/ Steel Bumper","offer_id":67722779492501,"sku":"DD7052","price":343.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ Yellow SAE Fog \/ Steel Bumper","offer_id":67722779525269,"sku":"DD7053","price":343.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ White SAE Fog \/ Steel Bumper","offer_id":67722779558037,"sku":"DD7055","price":439.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ Yellow SAE Fog \/ Steel Bumper","offer_id":67722779590805,"sku":"DD7056","price":439.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ White SAE Fog \/ Steel Bumper","offer_id":67722779623573,"sku":"DD7057","price":599.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ Yellow SAE Fog \/ Steel Bumper","offer_id":67722779656341,"sku":"DD7058","price":599.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Dual Color \/ White\/Yellow SAE Fog\/Wide \/ Plastic Bumper","offer_id":67722779689109,"sku":"DD8942","price":367.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Dual Color \/ White\/Yellow SAE Fog\/Wide \/ Steel Bumper","offer_id":67722779721877,"sku":"DD8943","price":407.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/ss3fog-1635_103281.jpg?v=1792100152"},{"product_id":"ss3-led-fog-light-kit-for-2018-2026-jeep-jl-wrangler","title":"SS3 LED Fog Light Kit for 2018-2026 Jeep JL Wrangler","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for Jeep JL Wrangler fog lamps\u003c\/li\u003e\n\u003cli\u003eSAE-compliant road-legal output\u003c\/li\u003e\n\u003cli\u003eIncludes round bezel, for factory-style appearance\u003c\/li\u003e\n\u003cli\u003ePlug and play, no modification needed\u003c\/li\u003e\n\u003cli\u003eAdvanced TIR optics provide high efficiency and focus\u003c\/li\u003e\n\u003cli\u003eDurable powdercoated aluminum die-cast\u003c\/li\u003e\n\u003cli\u003eEngineered and Assembled in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOverview. \u003c\/strong\u003eUpgrade the fog lights on your Jeep JL Wrangler with our SS3 Fog Light Bracket Kit! Featuring higher output intensity than any other 3” light on the market, these LED pods have been designed for maximum functionality, with custom-engineered TIR optics shining in highly useful beam patterns, all in a durable package. With the included round bezel, the SS3 Fog Kit has a clean, factory-style appearance, only much brighter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug and Play. \u003c\/strong\u003eThanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed on your Jeep JL Wrangler in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place! Wire adapters are included to connect the lights to your factory bulb sockets - no additional wiring needed!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in the SS3 collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the SS3 serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the SS3 is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Compliant. \u003c\/strong\u003eAll Stage Series beam pattern options were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Driving\u003c\/strong\u003e is designed to supplement your high beams, but it’s great for general illumination as well. Rather than a traditional \"spot\" pattern, the Stage Series Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"12\" width=\"10%\" alt=\"FineLine Optic\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Fineline_Logo_-_White_Background_w_TM.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSAE Fog \u003c\/strong\u003e uses our distinctive FineLine optic design, and provides an extremely wide field of view, with high-intensity output over an entire 80-degree spread. It serves as a great upgrade for any factory foglamp, and will fully illuminate the area in front of your vehicle. Choose cool white, selective yellow, or Dual-Color output to match your needs and the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_C1_Beam_Patterns_-_SAE_Fog_Standard_Description_B_1.jpg\" alt=\"SS3 Beam Patterns\" width=\"785\" height=\"272\"\u003e\u003c\/p\u003e\n\u003cp\u003eWhen installed as a pair and aimed in accordance with your state's regulations, the Driving White pattern meets SAE J581 standard as a Driving\/Auxiliary High Beam Light, and the Fog pattern meets SAE J583 standard as a Foglamp, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBacklight Functionality. \u003c\/strong\u003eThe Stage Series 3\" LED Pod features a distinctive backlight, in a brilliant amber color. This integrated backlight gives you an additional accent light, along with the main beam. The SS3's backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products. To power the backlight, use the included harness to tap your desired vehicle function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite, Yellow, or Dual-Color. \u003c\/strong\u003eChoose 6000K cool white, 3000K selective yellow, or the Dual-Color option. White provides a crisp, modern appearance, while selective yellow improves contrast in rain, snow, fog, and dust. The Dual-Color option combines both colors in one lamp and lets you select the output that best fits the conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmartSelect Dual-Color Control. \u003c\/strong\u003eThe Dual-Color option lets you switch the main beam between 6000K cool white and 3000K selective yellow using the factory fog light switch, with no extra switch required. To enter programming mode, cycle the fog lights On and Off three times, leaving each state active for at least half a second and no more than five seconds. The lamps will cycle through the available colors twice. Leave the lamps on for at least five seconds when your preferred color is displayed to save it. If no selection is made after two full cycles, the lamps return to white as the factory setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConsistent Fog Pattern. \u003c\/strong\u003eOn the Dual-Color option, both white and yellow use the same focused SAE fog pattern, so changing color does not change the beam shape or aiming.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMultiple Power Levels. \u003c\/strong\u003eStage Series LED pods are available in several power levels to suit your needs. Sport provides dependable performance and is a great entry-level upgrade. Dual-Color delivers output between Sport and Pro, with selectable white and yellow SAE fog output in a single lamp. Pro steps up the intensity for greater visibility, while Max delivers the highest output available for those seeking maximum performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS3_LED_Pod_-_Comparsion_Images_Map.jpg\" width=\"641\" height=\"171\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability. \u003c\/strong\u003eStage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SS3 Sport \/ White SAE Fog \/ Plastic Bumper","offer_id":67722811080853,"sku":"DD7044","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ Yellow SAE Fog \/ Plastic Bumper","offer_id":67722811113621,"sku":"DD7045","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ White SAE Fog \/ Plastic Bumper","offer_id":67722811146389,"sku":"DD7047","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ Yellow SAE Fog \/ Plastic Bumper","offer_id":67722811179157,"sku":"DD7048","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ White SAE Fog \/ Plastic Bumper","offer_id":67722811211925,"sku":"DD7049","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ Yellow SAE Fog \/ Plastic Bumper","offer_id":67722811244693,"sku":"DD7050","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ White SAE Fog \/ Steel Bumper","offer_id":67722811277461,"sku":"DD7052","price":343.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ Yellow SAE Fog \/ Steel Bumper","offer_id":67722811310229,"sku":"DD7053","price":343.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ White SAE Fog \/ Steel Bumper","offer_id":67722811342997,"sku":"DD7055","price":439.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ Yellow SAE Fog \/ Steel Bumper","offer_id":67722811375765,"sku":"DD7056","price":439.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ White SAE Fog \/ Steel Bumper","offer_id":67722811408533,"sku":"DD7057","price":599.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ Yellow SAE Fog \/ Steel Bumper","offer_id":67722811441301,"sku":"DD7058","price":599.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ White SAE Fog \/ Plastic Bumper (Sport)","offer_id":67722811474069,"sku":"DD7060","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Sport \/ Yellow SAE Fog \/ Plastic Bumper (Sport)","offer_id":67722811506837,"sku":"DD7061","price":303.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ White SAE Fog \/ Plastic Bumper (Sport)","offer_id":67722811539605,"sku":"DD7063","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Pro \/ Yellow SAE Fog \/ Plastic Bumper (Sport)","offer_id":67722811572373,"sku":"DD7064","price":399.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ White SAE Fog \/ Plastic Bumper (Sport)","offer_id":67722811605141,"sku":"DD7065","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Max \/ Yellow SAE Fog \/ Plastic Bumper (Sport)","offer_id":67722811637909,"sku":"DD7066","price":559.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Dual Color \/ White\/Yellow SAE Fog\/Wide \/ Plastic Bumper","offer_id":67722811670677,"sku":"DD8942","price":367.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Dual Color \/ White\/Yellow SAE Fog\/Wide \/ Steel Bumper","offer_id":67722811703445,"sku":"DD8943","price":407.96,"currency_code":"USD","in_stock":true},{"title":"SS3 Dual Color \/ White\/Yellow SAE Fog\/Wide \/ Plastic Bumper (Sport)","offer_id":67722811736213,"sku":"DD8944","price":367.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/18_jeep_jl_wrangler_ss3_pod_fog-3.jpg?v=1792100260"},{"product_id":"ss5-grille-crosslink-lightbar-kit-for-2007-2018-jeep-jk-wrangler","title":"SS5 Grille CrossLink Lightbar Kit for 2007-2018 Jeep JK Wrangler","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eBolt-on fitment on 2007-2018 Jeep JK Wrangler\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eUltra-high intensity, with custom-engineered TIR optics\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSelectable backlight color, with eight color options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eTorture-tested, heavy-duty construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eAssembled in USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Fitment.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e The \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eGrille \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eCrossLink Lightbar Kit for the \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e2007-2018 Jeep JK Wrangler\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e from Diode Dynamics allows you to mount \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003efour linked \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eSS5 LED pods \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003ein front of the factory grille\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e. These application-specific brackets were CAD-designed to bolt into place using factory mounting points \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eon the factory bumper\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e. No cutting or drilling required! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for Performance.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Featuring the highest output intensity of any 5-inch LED pod on the market, these auxiliary lamps have been designed for maximum functionality, with patented technology and custom-engineered TIR optics, all in a durable package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES_B.gif\" alt=\"SS5 Backlight Functionality\" width=\"30%\" height=\"100\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelectable Backlight.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e The Stage Series 5\" LED Pods included in the White kit feature a selectable backlight with eight different color options, perfect for an extra styling accent, or for more visibility when you’re not using the main beam. Selecting your backlight color is easy - simply alternate the power on and off. There’s no complicated programming with a controller! The SS5's backlight fully illuminates the TIR optic, providing unique accent lighting that you won't find on other LED pods. \u003c\/span\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Due to the yellow lens, the Yellow kit is only available with an Amber backlight color.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES2.gif\" alt=\"SS5 Backlight Functionality\" width=\"100%\" height=\"267\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCrossLink.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Our patent-pending CrossLink technology allows you to link the four SS5s included in this kit together to create a single lightbar. Unlike other options on the market that use multiple pieces to link pods together, we have designed a single-piece CNC aluminum link. This provides extreme rigidity, but is fully adjustable, for both straight and curved configurations. And thanks to inset threaded mounts built-in to every SS5, there is no need to buy a special linking version of the SS5 for your setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series beam pattern options were designed with advanced optical simulation modeling, to shape the output in highly-functional beam patterns with high efficiency. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCombo \u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003epattern combines both the Driving and Flood optics, perfect for all-around use. It shines light downrange in a focused 30x20 Driving beam to punch with distance, and fills in the surrounding area to create a full 70x30 degree pattern. With a row of driving optics in the middle, and a flood optic on the top and bottom, this has been designed to provide extra light for every situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_5_Beam_Patterns_-_Description_Combo_B_1.jpg\" alt=\"\" width=\"785\" height=\"272\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output, and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterchangeable Lens.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Need a different beam pattern or color? You can swap it yourself! We offer \u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003ereplacement lenses\u003c\/span\u003e\u003c\/a\u003e that allow you to change the color or optic of your Stage Series SS5 Pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSport or Pro.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available at two different power levels. All options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output. The Sport model uses nine high-intensity LEDs for 40W of total power. The Pro model steps things up in a big way, with double the total power at 90W. Click the Specifications tab to see more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSnap-on covers.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e For states that require them, we also offer \u003c\/span\u003e\u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cspan style=\"color: #c00000\"\u003esnap-on covers\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400\"\u003e for your SS5 Pod. These covers are available in a variety of colors and keep your SS5 Pod clean and protected from dirt, dust, or whatever else the road throws your way!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/span\u003e\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Bracket-Only \/ N\/A","offer_id":67722819895445,"sku":"DD7228P","price":239.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Cool White (6000K)","offer_id":67722819928213,"sku":"DD7229","price":975.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Yellow (3000K)","offer_id":67722819960981,"sku":"DD7230","price":975.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ Cool White (6000K)","offer_id":67722819993749,"sku":"DD7272","price":1439.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ Yellow (3000K)","offer_id":67722820026517,"sku":"DD7273","price":1439.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2015_jeep_jk_ss5_grille_initial_images_studio_straight_off_white.jpg?v=1792100145"},{"product_id":"ss5-bumper-led-pod-light-kit-for-2018-2026-jeep-jl-wrangler","title":"SS5 Bumper LED Pod Light Kit for 2018-2026 Jeep JL Wrangler","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eBolt-on fitment on 2018-2026 Jeep JL Wrangler\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eUltra-high intensity, with custom-engineered TIR optics\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSelectable backlight color, with eight color options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eTorture-tested, heavy-duty construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eControl through factory aux switch bank using the included harness\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eAssembled in USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Fitment.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e The \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eBumper \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eLED Pod Light Kit for the \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e2018-2026 Jeep JK Wrangler\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e from Diode Dynamics allows you to mount two \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eSS5 LED pods \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eon the factory bumper\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e. These application-specific brackets were CAD-designed to bolt into place using factory mounting points\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for Performance.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Featuring the highest output intensity of any 5-inch LED pod on the market, these auxiliary lamps have been designed for maximum functionality, with patented technology and custom-engineered TIR optics, all in a durable package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES_B.gif\" alt=\"SS5 Backlight Functionality\" width=\"30%\" height=\"100\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelectable Backlight.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e The Stage Series 5\" LED Pods included in the White kit feature a selectable backlight with eight different color options, perfect for an extra styling accent, or for more visibility when you’re not using the main beam. Selecting your backlight color is easy - simply alternate the power on and off. There’s no complicated programming with a controller! The SS5's backlight fully illuminates the TIR optic, providing unique accent lighting that you won't find on other LED pods. \u003c\/span\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Due to the yellow lens, the Yellow kit is only available with an Amber backlight color.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES2.gif\" alt=\"SS5 Backlight Functionality\" width=\"100%\" height=\"267\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControl through OEM Aux Switches.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Included with the kit is our OEM Auxiliary Switch Wiring Harness. This harness allows you to control your lights using the factory-installed aux switch bank. Two switches will be used - one for the main beam, and one for the backlight. For those who don't have the aux switch bank, our Heavy Duty Wiring Harness is also included to mount a switch and connect directly to the battery. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series beam pattern options were designed with advanced optical simulation modeling, to shape the output in highly-functional beam patterns with high efficiency. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCombo \u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003epattern combines both the Driving and Flood optics, perfect for all-around use. It shines light downrange in a focused 30x20 Driving beam to punch with distance, and fills in the surrounding area to create a full 70x30 degree pattern. With a row of driving optics in the middle, and a flood optic on the top and bottom, this has been designed to provide extra light for every situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cstrong\u003eDriving\u003c\/strong\u003e is great for general illumination at speed. Rather than a traditional \"spot\" pattern, the Stage Series Driving pattern shines in a 30x20 degree spread, providing just enough width to fully illuminate the road ahead at high speeds, but still staying focused to avoid too much foreground light. Although the SS5 Driving is too bright to be considered an SAE Auxiliary High Beam, it is perfect for an extra boost of light at speed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_5_Beam_Patterns_-_Description_Combo_Driving_B_1.jpg\" alt=\"\" width=\"785\" height=\"272\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output, and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterchangeable Lens.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Need a different beam pattern or color? You can swap it yourself! We offer \u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003ereplacement lenses\u003c\/span\u003e\u003c\/a\u003e that allow you to change the color or optic of your Stage Series SS5 Pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSport or Pro.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available at two different power levels. All options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output. The Sport model uses nine high-intensity LEDs for 40W of total power. The Pro model steps things up in a big way, with double the total power at 90W. Click the Specifications tab to see more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSnap-on covers.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e For states that require them, we also offer \u003c\/span\u003e\u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cspan style=\"color: #c00000\"\u003esnap-on covers\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400\"\u003e for your SS5 Pod. These covers are available in a variety of colors and keep your SS5 Pod clean and protected from dirt, dust, or whatever else the road throws your way! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/span\u003e\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"SS5 Sport \/ White Combo","offer_id":67722820583573,"sku":"DD7278","price":447.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ White Combo","offer_id":67722820616341,"sku":"DD7279","price":687.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ White Driving","offer_id":67722820649109,"sku":"DD7280","price":447.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ White Driving","offer_id":67722820681877,"sku":"DD7281","price":687.96,"currency_code":"USD","in_stock":true},{"title":"Bracket-Only \/ N\/A","offer_id":67722820714645,"sku":"DD7283P","price":95.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Yellow Combo","offer_id":67722820747413,"sku":"DD7288","price":447.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ Yellow Combo","offer_id":67722820780181,"sku":"DD7289","price":687.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Yellow Driving","offer_id":67722820812949,"sku":"DD7290","price":447.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ Yellow Driving","offer_id":67722820845717,"sku":"DD7291","price":687.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2018_jeep_jl_ss5_grille_2_pod_initial_images_studio_straight_off_white.jpg?v=1792100191"},{"product_id":"ss5-grille-crosslink-lightbar-kit-for-2018-2026-jeep-jl-wrangler","title":"SS5 Grille CrossLink Lightbar Kit for 2018-2026 Jeep JL Wrangler","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eBolt-on fitment on 2018-2023 Jeep JL Wrangler\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eUltra-high intensity, with custom-engineered TIR optics\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSelectable backlight color, with eight color options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eTorture-tested, heavy-duty construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eControl through factory aux switch bank using the included harness\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eAssembled in USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Fitment.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e The \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eGrille \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eCrossLink Lightbar Kit for the 2018-2023 Jeep JL Wrangler\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e from Diode Dynamics allows you to mount \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003efour linked \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eSS5 LED pods \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003ein front of the factory grille\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e. These application-specific brackets were CAD-designed to bolt into place using factory mounting points \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eon the factory bumper\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for Performance.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Featuring the highest output intensity of any 5-inch LED pod on the market, these auxiliary lamps have been designed for maximum functionality, with patented technology and custom-engineered TIR optics, all in a durable package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES_B.gif\" alt=\"SS5 Backlight Functionality\" width=\"30%\" height=\"100\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelectable Backlight.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e The Stage Series 5\" LED Pods included in the White kit feature a selectable backlight with eight different color options, perfect for an extra styling accent, or for more visibility when you’re not using the main beam. Selecting your backlight color is easy - simply alternate the power on and off. There’s no complicated programming with a controller! The SS5's backlight fully illuminates the TIR optic, providing unique accent lighting that you won't find on other LED pods. \u003c\/span\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Due to the yellow lens, the Yellow kit is only available with an Amber backlight color.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES2.gif\" alt=\"SS5 Backlight Functionality\" width=\"100%\" height=\"267\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCrossLink.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Our patent-pending CrossLink technology allows you to link the four SS5s included in this kit together to create a single lightbar. Unlike other options on the market that use multiple pieces to link pods together, we have designed a single-piece CNC aluminum link. This provides extreme rigidity, but is fully adjustable, for both straight and curved configurations. And thanks to inset threaded mounts built-in to every SS5, there is no need to buy a special linking version of the SS5 for your setup. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eControl through OEM Aux Switches.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Both kits include an OEM aux switch adapter wire that connects to the harness and allows you to control your lights using the factory-installed aux switch bank. Two switches will be used - one for the main beam, and one for the backlight. For those who don't have the aux switch bank, you will use the toggle switch adapter wire included with the harness to mount a switch. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series beam pattern options were designed with advanced optical simulation modeling, to shape the output in highly-functional beam patterns with high efficiency. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCombo \u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003epattern combines both the Driving and Flood optics, perfect for all-around use. It shines light downrange in a focused 30x20 Driving beam to punch with distance, and fills in the surrounding area to create a full 70x30 degree pattern. With a row of driving optics in the middle, and a flood optic on the top and bottom, this has been designed to provide extra light for every situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_5_Beam_Patterns_-_Description_Combo_B_1.jpg\" alt=\"\" width=\"785\" height=\"272\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output, and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterchangeable Lens.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Need a different beam pattern or color? You can swap it yourself! We offer \u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003ereplacement lenses\u003c\/span\u003e\u003c\/a\u003e that allow you to change the color or optic of your Stage Series SS5 Pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSport or Pro.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available at two different power levels. All options use high-intensity LED emitters, and TIR optics for unmatched focus and overall output. The Sport model uses nine high-intensity LEDs for 40W of total power. The Pro model steps things up in a big way, with double the total power at 90W. Click the Specifications tab to see more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSnap-on covers.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e For states that require them, we also offer \u003c\/span\u003e\u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cspan style=\"color: #c00000\"\u003esnap-on covers\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400\"\u003e for your SS5 Pod. These covers are available in a variety of colors and keep your SS5 Pod clean and protected from dirt, dust, or whatever else the road throws your way! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/span\u003e\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Bracket-Only \/ N\/A","offer_id":67722821337237,"sku":"DD6825P","price":239.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Cool White (6000K)","offer_id":67722821370005,"sku":"DD6826","price":975.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Yellow (3000K)","offer_id":67722821402773,"sku":"DD6827","price":975.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ Cool White (6000K)","offer_id":67722821435541,"sku":"DD7268","price":1439.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Pro \/ Yellow (3000K)","offer_id":67722821468309,"sku":"DD7269","price":1439.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/ss5_packaging_jeep_grille_mount_angled_close_on_2.jpg?v=1792100137"},{"product_id":"ss5-windshield-crosslink-lightbar-kit-for-2007-2018-jeep-jk-wrangler","title":"SS5 Windshield CrossLink Lightbar Kit for 2007-2018 Jeep JK Wrangler","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eBolt-on fitment on 2007-2018 Jeep JK Wrangler\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eUltra-high intensity, with custom-engineered TIR optics\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eSelectable backlight color, with eight color options\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eTorture-tested, heavy-duty construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400\" aria-level=\"1\"\u003e\u003cspan style=\"font-weight: 400\"\u003eAssembled in USA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect Fitment.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e The \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eWindshield \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003eCrossLink Lightbar Kit for the \u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e2007-2018 Jeep JK Wrangler\u003c\/span\u003e\u003cspan style=\"font-weight: 400\"\u003e from Diode Dynamics allows you to mount eight linked SS5 LED pods above the factory windshield. These application-specific brackets were CAD-designed to bolt into place using factory mounting points above the factory windshield. No cutting or drilling required!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned for Performance.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Featuring the highest output intensity of any 5-inch LED pod on the market, these auxiliary lamps have been designed for maximum functionality, with patented technology and custom-engineered TIR optics, all in a durable package.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES_B.gif\" alt=\"SS5 Backlight Functionality\" width=\"30%\" height=\"100\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelectable Backlight.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e The Stage Series 5\" LED Pods included in the White kit feature a selectable backlight with eight different color options, perfect for an extra styling accent, or for more visibility when you’re not using the main beam. Selecting your backlight color is easy - simply alternate the power on and off. There’s no complicated programming with a controller! The SS5's backlight fully illuminates the TIR optic, providing unique accent lighting that you won't find on other LED pods. \u003c\/span\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Due to the yellow lens, the Yellow kit is only available with an Amber backlight color.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/SS5_Backlight_Cycle_GIF_Crop_LOWRES2.gif\" alt=\"SS5 Backlight Functionality\" width=\"100%\" height=\"267\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCrossLink.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Our patent-pending CrossLink technology allows you to link the eight SS5s included in this kit together to create a single lightbar. Unlike other options on the market that use multiple pieces to link pods together, we have designed a single-piece CNC aluminum link. This provides extreme rigidity, but is fully adjustable, for both straight and curved configurations. And thanks to inset threaded mounts built-in to every SS5, there is no need to buy a special linking version of the SS5 for your setup. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series beam pattern options were designed with advanced optical simulation modeling, to shape the output in highly-functional beam patterns with high efficiency. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCombo \u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003epattern combines both the Driving and Flood optics, perfect for all-around use. It shines light downrange in a focused 30x20 Driving beam to punch with distance, and fills in the surrounding area to create a full 70x30 degree pattern. With a row of driving optics in the middle, and a flood optic on the top and bottom, this has been designed to provide extra light for every situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Stage_Series_5_Beam_Patterns_-_Description_Combo_B_1.jpg\" alt=\"\" width=\"785\" height=\"272\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhite or Yellow.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e This kit is available in a cool white or selective yellow color. The white is a 6000K color temperature, which is a true cool white output, and matches most factory LED lighting. The selective yellow is a 3000K color temperature, great for high contrast in poor weather or a distinctive look on the road. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInterchangeable Lens.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Need a different beam pattern or color? You can swap it yourself! We offer \u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/replacement-lenses.html\"\u003e\u003cspan style=\"color: #c00000\"\u003ereplacement lenses\u003c\/span\u003e\u003c\/a\u003e that allow you to change the color or optic of your Stage Series SS5 Pods.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSnap-on covers.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e For states that require them, we also offer \u003c\/span\u003e\u003ca href=\"https:\/\/www.diodedynamics.com\/off-road\/off-road-accessories-wiring-lens\/covers.html\"\u003e\u003cspan style=\"font-weight: 400\"\u003e\u003cspan style=\"color: #c00000\"\u003esnap-on covers\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400\"\u003e for your SS5 Pod. These covers are available in a variety of colors and keep your SS5 Pod clean and protected from dirt, dust, or whatever else the road throws your way! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/span\u003e\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"Bracket-Only \/ N\/A","offer_id":67722837721237,"sku":"DD7223P","price":319.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Cool White (6000K)","offer_id":67722837754005,"sku":"DD7224","price":1871.96,"currency_code":"USD","in_stock":true},{"title":"SS5 Sport \/ Yellow (3000K)","offer_id":67722837786773,"sku":"DD7225","price":1871.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2015_jeep_jk_ss5_close_windshield_creative_on_1.jpg?v=1792100132"},{"product_id":"switchback-hd-led-halos-for-2018-2026-jeep-jl-wrangler-pair","title":"Switchback HD LED Halos for 2018-2026 Jeep JL Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eComputer-designed LED Halos for the 2018-2023 Jeep JL Wrangler\u003c\/li\u003e \u003cli\u003eProprietary durable phosphor coating, for uniform solid appearance\u003c\/li\u003e \u003cli\u003eMulti-function PWM drivers, fully waterproof, featuring low power, high power, and turn signal modes\u003c\/li\u003e \u003cli\u003eExtremely bright, high-density LEDs that are visible even in direct sunlight\u003c\/li\u003e \u003cli\u003eIntegrated mounting tabs for easy installation\u003c\/li\u003e \u003cli\u003eDesigned and assembled in the U.S.A.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eTime for an upgrade!\u003c\/strong\u003e This halo kit, designed specifically for the 2018-2023 Jeep JL Wrangler, includes custom-sized halo rings with multiple functions: extremely bright white for the DRLs, lower-power white for night time use, and a brilliant amber for the turn signals. It will add a distinct, unique look to your Jeep both day and night!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eHDHalo Technology.\u003c\/strong\u003e These HD LED halo rings have been designed from the ground-up to be absolutely the brightest, most reliable halos physically possible. Each halo is populated with a large number of high-density (HD) LEDs, which are then coated by a diffusing gel, resulting in a perfectly uniform light when turned on. When off, the diffusing gel hides the chips, resulting in a clean, OEM appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePure white color. Assembled in USA,\u003c\/strong\u003e the halos light in a pure 6000K white color, not a cool blue like cheaper products on the market. And because they use modern high-power amber chips, rather than traditional LEDs, the amber is even brighter than the white!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWiring.\u003c\/strong\u003e All wires have a durable braided wire covering. The LED has a 20-inch wire with female JST type connector. This connector may be de-pinned in order to run wires through small holes during installation. Both the input and output wire on the driver are also 20 inches each. A pigtail is included that is also 20 inches, with male spade connectors on the end to connect to factory wiring with included T-taps. You will have plenty of room to run wires anywhere you'd like. Two switchback solid-state relay harnesses are also included. These allow the halos to draw power directly from the battery while still using your factory signals for activation.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePWM Control.\u003c\/strong\u003e Aside from the high brightness and perfectly uniform output, one great feature of these halos is the integrated multifunction PWM dimming control. The drivers have four wires, to be connected to any 12V signals as follows:\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhite:\u003c\/strong\u003e White Low Power, 50% brightness\u003cbr\u003e\u003cstrong\u003eRed:\u003c\/strong\u003e White High Power, 100% brightness\u003cbr\u003e\u003cstrong\u003eYellow: \u003c\/strong\u003eAmber Signal, double brightness, flashing (dims if powered more than two seconds)\u003cbr\u003e\u003cstrong\u003eBlack:\u003c\/strong\u003e Ground\u003c\/p\u003e\n\u003cp\u003eAll input wires activate the halos, at different brightness levels. \u003cstrong\u003eAll switchback halos ship with \"low\" priority drivers.\u003c\/strong\u003e This means that if \u003cstrong\u003eboth\u003c\/strong\u003e \"low\" and \"high\" power inputs are powered, the LED will light up in white, with \u003cstrong\u003elow\u003c\/strong\u003e power level. This is convenient for connecting the red wire to a parking light or DRL signal, for use during the day as a high-power DRL. Then, if the white wire is connected to the headlamp power, they will dim down at night. If the yellow wire is powered at any time, the halo will light up in amber color, intended for signaling. If you'd like to use amber all the time, no problem! It will dim automatically if powered for more than two seconds, to keep it safe.\u003c\/p\u003e \u003cp\u003eThis entire setup allows you to connect the halo directly as a multifunction lamp, without any external controllers needed. Of course, this is completely optional. You can just use one or two of the input wires if you'd like.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we assemble and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"185 \/ Switchback Cool White and Amber","offer_id":67722872750229,"sku":"DD2241","price":119.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/18_jeep_jl_hd_halos_close_sb_collage.jpg?v=1792100151"},{"product_id":"switchback-turn-signal-leds-for-1997-2001-jeep-wrangler-pair","title":"Switchback Turn Signal LEDs for 1997-2001 Jeep Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3157 bulb size\u003c\/li\u003e \u003cli\u003eGreater output than factory bulbs\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Jeep Wrangler illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDual Brightness. \u003c\/strong\u003eThe Wrangler uses a 3157 dual-filament bulb. They light up with low power as parking lights, then they get brighter when the turn signal or hazards are activated. The brightness ratio of your factory bulbs is traditionally 15:100, or 15% lumen output for the dim function. Diode Dynamics bulbs are designed to match this, so there is enough distinction between \"low\" and \"high\" brightness levels. As with all Diode Dynamics LED bulbs, these turn signal bulbs are rated with accurate, measured lumen figures, not calculations or guesses. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchback. \u003c\/strong\u003eThe dual-filament function of your factory turn signal bulbs gives you the ability to choose a unique LED bulb model: switchback! These bulbs illuminate in a bright white for the \"low\" power setting for your running\/parking light, then switch to intense amber when the turn signals are activated. When the turn signal is switched off, they return to the original white output. The result is a modern dual-color effect, as seen on many high-end vehicles on the road. Please note: in order to properly see the white, you must have clear reflectors\/lenses over the turn signal bulb. If your Wrangler has amber reflectors, you might be able to find clear aftermarket ones to complete this upgrade!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Wrangler looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Wrangler, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP24 \/ Switchback Cool White and Amber","offer_id":67722881237141,"sku":"DD0053P","price":63.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/frnturn-1631-sb_109254.jpg?v=1792100166"},{"product_id":"switchback-turn-signal-leds-for-2002-2006-jeep-wrangler-rubicon-pair","title":"Switchback Turn Signal LEDs for 2002-2006 Jeep Wrangler Rubicon (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler Rubicon front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3157 bulb size\u003c\/li\u003e \u003cli\u003eGreater output than factory bulbs\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Jeep Wrangler Rubicon illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Wrangler Rubicon.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDual Brightness. \u003c\/strong\u003eThe Wrangler Rubicon uses a 3157 dual-filament bulb. They light up with low power as parking lights, then they get brighter when the turn signal or hazards are activated. The brightness ratio of your factory bulbs is traditionally 15:100, or 15% lumen output for the dim function. Diode Dynamics bulbs are designed to match this, so there is enough distinction between \"low\" and \"high\" brightness levels. As with all Diode Dynamics LED bulbs, these turn signal bulbs are rated with accurate, measured lumen figures, not calculations or guesses. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchback. \u003c\/strong\u003eThe dual-filament function of your factory turn signal bulbs gives you the ability to choose a unique LED bulb model: switchback! These bulbs illuminate in a bright white for the \"low\" power setting for your running\/parking light, then switch to intense amber when the turn signals are activated. When the turn signal is switched off, they return to the original white output. The result is a modern dual-color effect, as seen on many high-end vehicles on the road. Please note: in order to properly see the white, you must have clear reflectors\/lenses over the turn signal bulb. If your Wrangler Rubicon has amber reflectors, you might be able to find clear aftermarket ones to complete this upgrade!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Wrangler Rubicon looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Wrangler Rubicon, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler Rubicon. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP24 \/ Switchback Cool White and Amber","offer_id":67722898014357,"sku":"DD0053P","price":63.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/frnturn-1635-sb_109302.jpg?v=1792100188"},{"product_id":"switchback-turn-signal-leds-for-2007-2017-jeep-wrangler-pair","title":"Switchback Turn Signal LEDs for 2007-2017 Jeep Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler front turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3157 bulb size\u003c\/li\u003e \u003cli\u003eGreater output than factory bulbs\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Jeep Wrangler illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eDual Brightness. \u003c\/strong\u003eThe Wrangler uses a 3157 dual-filament bulb. They light up with low power as parking lights, then they get brighter when the turn signal or hazards are activated. The brightness ratio of your factory bulbs is traditionally 15:100, or 15% lumen output for the dim function. Diode Dynamics bulbs are designed to match this, so there is enough distinction between \"low\" and \"high\" brightness levels. As with all Diode Dynamics LED bulbs, these turn signal bulbs are rated with accurate, measured lumen figures, not calculations or guesses. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchback. \u003c\/strong\u003eThe dual-filament function of your factory turn signal bulbs gives you the ability to choose a unique LED bulb model: switchback! These bulbs illuminate in a bright white for the \"low\" power setting for your running\/parking light, then switch to intense amber when the turn signals are activated. When the turn signal is switched off, they return to the original white output. The result is a modern dual-color effect, as seen on many high-end vehicles on the road. Please note: in order to properly see the white, you must have clear reflectors\/lenses over the turn signal bulb. If your Wrangler has amber reflectors, you might be able to find clear aftermarket ones to complete this upgrade!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Wrangler looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e\n\u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Wrangler, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP24 \/ Switchback Cool White and Amber","offer_id":67722905911445,"sku":"DD0053P","price":63.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd0053p_3157_switchback_pair_2.jpg?v=1792100207"},{"product_id":"switchback-turn-signal-leds-for-2018-2026-jeep-jl-wrangler-sport-pair","title":"Switchback Turn Signal LEDs for 2018-2026 Jeep JL Wrangler Sport (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWhite running light with bright amber turn function\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep JL Wrangler front turn 7443 size bulbs\u003c\/li\u003e \u003cli\u003eIncludes resistors to prevent hyperblinking\u003c\/li\u003e \u003cli\u003eGreater output than factory bulbs\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eSwitchback. \u003c\/strong\u003eThese aren't your average turn signal bulbs- they're Switchback! On the Jeep JL Wrangler, they will illuminate in a bright white color, then switch to intense amber when the turn signals are activated. The result is a modern dual-color effect! This is one of the best ways to easily add styling to the JL.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Wrangler Sport looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal. This can be corrected with the included LED Resistors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Jeep. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP24 \/ Switchback Cool White and Amber","offer_id":67722916757653,"sku":"DD0341","price":71.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/2018_jeep_wrangler_7444_turn_switchback_running_2.jpg?v=1792100233"},{"product_id":"tail-light-turn-signal-leds-for-2018-2026-jeep-jl-wrangler-pair","title":"Tail Light\/Turn Signal LEDs for 2018-2026 Jeep JL Wrangler (pair)","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eModern LED appearance with instant on and off\u003c\/li\u003e \u003cli\u003eDirect replacement for Jeep Wrangler rear turn bulbs\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 3157 bulb size\u003c\/li\u003e \u003cli\u003eMultiple brightness levels available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eLED Indicators. \u003c\/strong\u003eThe factory incandescent turn signals on the Jeep Wrangler illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Tail_Light_-_Comparision_Image.jpg\" alt=\"Red Rear Turn Comparison\" width=\"750\" height=\"150\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCorrect Color. \u003c\/strong\u003eSince the lens on your rear turn singal is red, you'll see that we only offer a red color option, which is correct to SAE\/DOT \"red\" requirements. Red is the correct emitter color for maximum turn signal output on your Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReduced Load.\u003c\/strong\u003e When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Wrangler looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a \"hyperblink,\" or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.\u003c\/p\u003e\n\u003cp\u003eThe most basic, tried-and-true method to correct hyperblinking is to add resistors. Since a 6-ohm resistor uses about the same power as a standard turn signal bulb, these can be used on any vehicle, but does require tapping factory signals. One resistor is needed to replace each turn signal bulb.\u003c\/p\u003e \u003cp\u003eYou may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Wrangler, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP11 \/ Red","offer_id":67722977247381,"sku":"DD0051P","price":55.96,"currency_code":"USD","in_stock":true},{"title":"HP48 \/ Red","offer_id":67722977280149,"sku":"DD0056P","price":39.96,"currency_code":"USD","in_stock":true},{"title":"XP80 \/ Red","offer_id":67722977312917,"sku":"DD0059P","price":79.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/3157_xp80_red_2_pack_8.jpg?v=1792100375"},{"product_id":"trunk-light-led-for-1997-2009-jeep-wrangler","title":"Trunk Light LED for 1997-2009 Jeep Wrangler","description":"\u003csection\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDirect replacement for Jeep Wrangler trunk light bulb\u003c\/li\u003e \u003cli\u003eIncreased output with LED appearance\u003c\/li\u003e \u003cli\u003ePlug and play, no modification with factory 194 bulb size\u003c\/li\u003e \u003cli\u003eAvailable in multiple brightness levels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eOverview\u003c\/h3\u003e \u003cp\u003e\u003cstrong\u003eModern Style. \u003c\/strong\u003eReplacement LED bulbs are a simple way to improve the look and output of the trunk lights on your Jeep Wrangler. Compared to the original incandescent bulbs, they will provide a brighter appearance with modern color. The installation is straightforward, with just a bulb swap - making this a great simple upgrade for the Wrangler.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBrightness. \u003c\/strong\u003eAll Diode Dynamics LED lighting is rated with accurate, measured lumen figures, not calculations or guesses. We test the true output in-house, and provide you the real numbers to compare.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/Interior_-_Comparision_Image_Trunk_-_FlexLight_2_1.jpg\" width=\"639\" height=\"170\" alt=\"194 Comparison\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eColor Options.\u003c\/strong\u003e In addition to vibrant colors of blue, red, amber, and green, our trunk light bulbs are available in a number of white color options. These include a cool white 6000K, pure white 5000K, natural white 4000K, and warm white 3000K. Whether you want a modern cool white appearance, or a traditional warm white color with more output, we have the color to fit your needs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColors that match.\u003c\/strong\u003e Most of us have seen lighting setups with random shades of white that don't quite match. At Diode Dynamics, we operate an integrating sphere, which is a piece of lab equipment used to analyze the exact color spectrum of the LED bulbs we produce. By testing each batch of products, we can ensure that all bulbs will match in color, to avoid various tints of white. These bulbs will match any other upgrades you may have from Diode Dynamics, for factory-style uniformity and a clean appearance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReliability. \u003c\/strong\u003eDiode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Wrangler. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eExperience. \u003c\/strong\u003eAfter over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Jeep or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e\u003c\/section\u003e","brand":"Diode Dynamics","offers":[{"title":"HP3 \/ Amber","offer_id":67723012243605,"sku":"DD0018S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Blue","offer_id":67723012276373,"sku":"DD0019S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Warm White (3000K)","offer_id":67723012309141,"sku":"DD0020S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Natural White (4000K)","offer_id":67723012341909,"sku":"DD0021S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Pure White (5000K)","offer_id":67723012374677,"sku":"DD0022S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Red","offer_id":67723012407445,"sku":"DD0023S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Cool White (6000K)","offer_id":67723012440213,"sku":"DD0024S","price":6.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Amber","offer_id":67723012472981,"sku":"DD0025S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Blue","offer_id":67723012505749,"sku":"DD0026S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Warm White (3000K)","offer_id":67723012538517,"sku":"DD0027S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Natural White (4000K)","offer_id":67723012571285,"sku":"DD0028S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Pure White (5000K)","offer_id":67723012604053,"sku":"DD0029S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Red","offer_id":67723012636821,"sku":"DD0030S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"HP5 \/ Cool White (6000K)","offer_id":67723012669589,"sku":"DD0031S","price":10.36,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Amber","offer_id":67723012702357,"sku":"DD0145S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Blue","offer_id":67723012735125,"sku":"DD0146S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Green","offer_id":67723012767893,"sku":"DD0147S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Warm White (3000K)","offer_id":67723012800661,"sku":"DD0148S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Red","offer_id":67723012833429,"sku":"DD0149S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"SMD12 \/ Cool White (6000K)","offer_id":67723012866197,"sku":"DD0150S","price":11.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Warm White (3000K)","offer_id":67723012898965,"sku":"DD0192S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Cool White (6000K)","offer_id":67723012931733,"sku":"DD0193S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Red","offer_id":67723012964501,"sku":"DD0194S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Blue","offer_id":67723012997269,"sku":"DD0195S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Amber","offer_id":67723013030037,"sku":"DD0196S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"FlexLight \/ Green","offer_id":67723013062805,"sku":"DD0197S","price":19.96,"currency_code":"USD","in_stock":true},{"title":"HP3 \/ Green","offer_id":67723013095573,"sku":"DD0203S","price":6.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/tnk-1631_120149.jpg?v=1792100524"},{"product_id":"hitchmount-led-pod-4-pin-reverse-kit","title":"HitchMount LED Pod 4-Pin Reverse Kit","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows you to mount an SSC1 or C1R LED pod in any 2-inch or 2.5-inch trailer hitch receiver.\u003c\/li\u003e\n\u003cli\u003eAdds a powerful reverse light, 4th brake light, and additional running light.\u003c\/li\u003e\n\u003cli\u003eSnap-fit installation, with simple wiring.\u003c\/li\u003e\n\u003cli\u003eOptional SafetyStrobe brake light strobing.\u003c\/li\u003e\n\u003cli\u003eMade in USA with Global Materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eAdd significantly more light output when backing up at night with our Stage Series HitchMount Reverse Light Kit! This kit allows you to mount one SSC1 or C1R LED pod in your 2-inch or 2.5-inch trailer hitch receiver, adding a high-power reverse light, additional running light, and an optional 4th brake light with the C1R option. With the included wiring harness, this kit connects to your vehicle's 4-pin trailer connector for simple, everyday operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrighter Backup.\u003c\/strong\u003e Factory reverse bulbs just don't provide enough light output to back up at night confidently. By pairing our patented TIR optics with high-powered LEDs, the SSC1 and C1R included in this kit provide an additional reverse light that's several times brighter than stock bulbs alone. And with a recent upgrade, the C1R LED Pod now delivers 68% more light output, providing even more output when backing up at night! Plus, it automatically comes on when the vehicle is put in reverse!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Running Light.\u003c\/strong\u003e The Stage Series LED pod included with this kit features a distinctive red backlight that operates as an additional running light during use! The backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafetyStrobe 4th Brake Light.\u003c\/strong\u003e The C1R option features a high-power red function to serve as a powerful 4th brake light, along with the low-power running light. The high-power red functionality activates anytime you apply your brakes, adding a 4th brake light to your vehicle.\u003c\/p\u003e\n\u003cp\u003eThe C1R also features optional brake light strobing. By default, the C1R will flash three times when the brake lights are applied, for greater visibility. When your parking lights are enabled, this feature will activate in 15-second intervals. The SafetyStrobe feature can be easily disabled if desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEveryday Operation.\u003c\/strong\u003e The included wiring harness plugs directly into your factory 4-pin trailer connector, and features a wire tap to power the reverse light. The kit operates as an additional red running light with your tail lights, and then automatically switches to a high-power backup light when your vehicle is in reverse. The high-power 4th brake light feature included with the C1R will activate anytime you apply your brakes. For manual override of the reverse light, a \u003ca style=\"color: #c00000\" href=\"https:\/\/www.diodedynamics.com\/reverse-light-wiring-kit-w-running-light.html\" target=\"_blank\" rel=\"noopener\"\u003euniversal backup harness\u003c\/a\u003e can be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple Installation.\u003c\/strong\u003e The patent-pending snap-fit design allows you to install this mount in minutes, without any drilling or need for a hitch pin. Simply insert the HitchMount into your trailer hitch receiver and the snap-fit side mounts will snap into place. Installation couldn't be easier!\u003c\/p\u003e\n\u003cp\u003eIf you would like to use a locking trailer pin to install this kit instead of the snap-fit pins, you can do so with a quick modification. \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.youtube.com\/watch?v=yr3GmX8EFvg\" target=\"_blank\" rel=\"noopener\"\u003eWatch the video\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e Traditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in our Stage Series pods collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more: \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the Stage Series LED pods serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of our pods is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output.\u003c\/strong\u003e All Stage Series beam patterns were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood \u003c\/strong\u003e pattern was designed to provide uniform, even illumination with a full 50x50 degree spread of light on the SSC1 and C1R LED pod. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly manufacture and engineer our own products in the United States using globally sourced materials, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"C1R + Brake","offer_id":67723464507541,"sku":"DD8762","price":125.96,"currency_code":"USD","in_stock":true},{"title":"C1","offer_id":67723464540309,"sku":"DD8765","price":83.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd7422_c1r_hitch_mount_pod_jdp3wfuact35hwc7_7_e1d7921a-7056-449f-9e95-75ba10415046.jpg?v=1792100896"},{"product_id":"hitchmount-led-pod-7-pin-reverse-kit","title":"HitchMount LED Pod 7-Pin Reverse Kit","description":"\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllows you to mount an SSC1 or C1R LED pod in any 2-inch or 2.5-inch trailer hitch receiver.\u003c\/li\u003e\n\u003cli\u003eAdds a powerful reverse light, 4th brake light, and additional running light.\u003c\/li\u003e\n\u003cli\u003eSimple 5-minute installation, with no need for custom wiring or routing wires.\u003c\/li\u003e\n\u003cli\u003eOptional SafetyStrobe brake light strobing.\u003c\/li\u003e\n\u003cli\u003eDesigned and assembled in USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eAdd significantly more light output when backing up at night with our Stage Series HitchMount Reverse Light Kit! This kit allows you to mount one SSC1 or C1R LED pod in your 2-inch or 2.5-inch trailer hitch receiver, adding a high-power reverse light, additional running light, and an optional 4th brake light with the C1R option. With the included wiring harness, this kit connects to your vehicle's factory trailer hitch wiring for simple, everyday operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrighter Backup.\u003c\/strong\u003e Factory reverse bulbs just don't provide enough light output to back up at night confidently. By pairing our patented TIR optics with high-powered LEDs, the SSC1 and C1R included in this kit provide an additional reverse light that's several times brighter than stock bulbs alone. And with a recent upgrade, the C1R LED Pod now delivers 68% more light output, providing even more output when backing up at night! Plus, it automatically comes on when the vehicle is put in reverse!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Running Light.\u003c\/strong\u003e The Stage Series LED pod included with this kit features a distinctive red backlight that operates as an additional running light during use! The backlight fully illuminates the TIR optic, providing a more unique and modern look than the small indicator LEDs found in other products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafetyStrobe 4th Brake Light.\u003c\/strong\u003e The C1R option features a high-power red function to serve as a powerful 4th brake light, along with the low-power running light. The high-power red functionality activates anytime you apply your brakes, adding a 4th brake light to your vehicle.\u003c\/p\u003e\n\u003cp\u003eThe C1R also features optional brake light strobing, which can be activated in 15-second intervals. By default, the C1R will flash three times when the brake lights are initially applied, for greater visibility. The SafetyStrobe feature can be easily disabled if desired.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEveryday Operation.\u003c\/strong\u003e This kit is completely plug-and-play with all 7-pin trailer connectors. The included harness plugs right into your factory trailer hitch wiring for easy installation and operation. The kit operates as an additional red running light with your tail lights, and then automatically switches to a high-power backup light when your vehicle is in reverse. The high-power 4th brake light feature included with the C1R will activate anytime you apply your brakes. If you would like to have override functionality to manually turn on the reverse light anytime, you will need to purchase the universal backup harness.\u003c\/p\u003e\n\u003cp\u003eSome newer trucks feature advanced trailer safety systems that automatically detect when a trailer is connected. To ensure compatibility, each HitchMount kit includes an optional red wire that can tap into your tail light’s brake signal, preventing trailer warnings or dashboard alerts for hassle-free operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSimple Installation.\u003c\/strong\u003e The patent-pending snap-fit design allows you to install this mount in minutes, without any drilling or need for a hitch pin. Simply insert the HitchMount into your trailer hitch receiver and the snap-fit side mounts will snap into place. Installation couldn't be easier and takes less than five minutes!\u003c\/p\u003e\n\u003cp\u003eThis kit is ideal for anyone who uses their trailer hitch often since removal can be done in minutes as well! Simply unplug the harness, press the snap-fit pins and remove the mount. The included DT connector cover protects the harness from dirt and moisture when the HitchMount is not in use. When you're not using your hitch for towing, you can quickly reinstall the HitchMount and plug it back in.\u003c\/p\u003e\n\u003cp\u003eIf you would like to use a locking trailer pin to install this kit instead of the snap-fit pins, you can do so with a quick modification. \u003cspan style=\"color: #c00000\"\u003e\u003ca style=\"color: #c00000\" href=\"https:\/\/www.youtube.com\/watch?v=yr3GmX8EFvg\" target=\"_blank\" rel=\"noopener\"\u003eWatch the video\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocused.\u003c\/strong\u003e \u003cspan style=\"font-weight: 400\"\u003eTraditional optics like reflectors or simple lenses lose light internally and to glare, so not all of the light shines on target. Instead, the custom-engineered TIR optic in our Stage Series pods collects all of the light from the LED, and directs it only where you need it, drastically reducing glare and improving total efficiency. Click here to learn more:\u003c\/span\u003e \u003cspan style=\"color: #c00000\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=17IDSk05rqw\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #c00000\"\u003eTotal Internal Reflection (TIR) Optics | Stage Series Video\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003eFrom there, while other options on the market lose as much as 10% of the light output shining through an outer lens, the custom-molded TIR optic in the Stage Series LED pods serves as both the optic and main lens for greater efficiency and light output (patent pending). Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of our pods is much greater than other LED pods using basic optics or reflectors with a standard outer lens.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFunctional Output.\u003c\/strong\u003e All Stage Series beam patterns were designed with optical simulation modeling, to shape the output in a highly-functional beam pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFlood \u003c\/strong\u003e\u003cspan style=\"font-weight: 400\"\u003epattern was designed to provide uniform, even illumination with a full 50x50 degree spread of light on the SSC1 and C1R LED pod. Unlike generic \"flood\" lights that are simply a heavily diffused spotlight, our flood pattern uses pillow optics on the outer lens surface, to provide a true optically designed spread, for even illumination throughout.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProven Reliability.\u003c\/strong\u003e Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All of these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperience.\u003c\/strong\u003e After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer an increasing number of products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you're driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!\u003c\/p\u003e","brand":"Diode Dynamics","offers":[{"title":"C1","offer_id":67723465228437,"sku":"DD7420","price":97.96,"currency_code":"USD","in_stock":true},{"title":"C1R + Brake","offer_id":67723465261205,"sku":"DD7422","price":139.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3112\/5653\/files\/dd7422_c1r_hitch_mount_pod_jdp3wfuact35hwc7_89fcd2b0-7300-4d91-b252-386817b31246.jpg?v=1792100899"}],"url":"https:\/\/www.diodedynamics.com\/collections\/jeep-wrangler.oembed","provider":"Diode Dynamics LLC","version":"1.0","type":"link"}