LED Resistor Kit

SKU: resistkit

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

$10.00
Add to Wishlist

LED Resistor Kit

More Views

Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)

When you replace incandescant turn signal bulbs with LEDs in most vehicles, the vehicle will start hyperblinking because the LED uses much less power, and the vehicle thinks the bulb is out. You can use these resistors to fix the problem of hyperblinking when you convert to LED bulbs.

Diode Dynamics resistors have extra-long 8" leads for easier installation, and have a rating of 50w, 6ohm. This is usually enough to compensate for one bulb. If you are installing four LED turn signals (front and rear) we recommend four total resistors.

Included with your order:

  • 2 resistors
  • 4 quick-splice "scotch-lock" connectors

 


Installation: Connect one side of the resistor to the positive turn signal wire, and the other side to negative (ground) with included connectors.

Year No
Make No
Model No
Application No
  1. Great Product, Resolved Hyper Blink Review by Caleb
    Value
    Quality
    Price

    Had to install 2 resistors per bulb to resolve the hyper-blink issue on a 2013 Dodge Ram 2500!! Great product, the issue is the Chrysler CAN-BUS system, too smart for its own good!! Easy install, great quality!! (Posted on 3/20/14)

  2. awesome! great service Review by dado
    Price
    Value
    Quality

    I have purchased the resistor kit and works just as advertised.
    Speedy shipping as I live in Hawaii. It only took 2 days. Definitely order form These guys again (Posted on 2/23/14)

  3. Works as Advertised Review by C13RT
    Price
    Value
    Quality

    Well After a installing it twice on one turn signal, it worked as advertised.
    The problem with the Dodge Challenger R/T Classic that I have is the turn signal had three wires, now this isn't Diode Dynamics fault, but the color coding on the wires is completely different than what I was expecting. After splicing the ground wire and one of the two other wires it didn't change anything, I still had hyper-blinking. I removed it and I switch the splice to the other wire my hyper-blinking went away and the turn signal blinked normally. I will take pictures of what wires I spliced and provide to Diode Dynamics so that others in the future who may have this issue can atleast avoid some headache. Now I just need to get my switchback LED's installed to see if it fixes another issue I'm having. Great product none the less. (Posted on 12/16/13)

  4. Must have for most vehicles. Review by Ryan
    Price
    Value
    Quality

    Easy simple install. Installed on my 2013 genesis coupe and it fixed the hyper blink instantly. Works great and is only ten bucks. I recommend buying this even if you think you won't need it, just in case you do. (Posted on 6/20/13)

  5. Sweet!! Review by Randy
    Price
    Value
    Quality

    No more being annoyed by fast blinking turn signals,this did the trick and was easy to add these on. (Posted on 6/12/13)

  6. high quality and easy install Review by Ryan
    Value
    Quality
    Price

    Heavy duty and work as described. They got hot so it would be nice to have better mounting method like bracket or high temp caulk/glue. No worries. Heat sink equipped and worth every penny. Leads are just king enough to get it in a good spot to keep from melting stuff. Worth the money for sure. (Posted on 5/28/13)

  7. Fixed Switchback Issues Review by Michael
    Quality
    Price
    Value

    Purchased a kit for the front switchbacks on my 2013 2.0t Gen Coupe. The switchbacks kept freezing while turning and going back to regular driving mode. I attached these quick and easy, and the issues went away immediately. The resistors are very beefy and are of a quality build. I only wish that they came with screws for mounting and were built smaller so that concealment would be easier. (Posted on 5/26/13)

  8. Awesome Review by Chris
    Price
    Value
    Quality

    These are so easy to install and they worked perfectly. Thank you DiodeDynamics. I'll definitely be returning for my lighting needs. (Posted on 5/9/13)

  9. Awesome! Review by Fetzko
    Quality
    Price
    Value

    Just put these on my rear tai lights in my 04 mazda 6 and they work wonders! They stopped the hyper blinking with no problems! They were also installed with ease in no time at all. Great product! (Posted on 4/26/13)

  10. easy as 1 2 3 Review by sniper
    Value
    Quality
    Price

    easy to install in my taillights on a 2013 kia soul. stopped hyper blinking. held up for a few months so far. good quality from what i can see (Posted on 2/28/13)

  11. Works perfect Review by Jon
    Quality
    Price
    Value

    Purchased this for my G35 headlights and taillights. They worked out perfectly. Installation was a breeze. (Posted on 1/6/13)

  12. Worked great Review by Adam
    Quality
    Price
    Value

    I installed these on my 2012 KIA Optima SX to stop the hyperflashing caused by installing LED switchback turn signals. The install was simple enough and the resistors look and feel of solid quality. They heat up a bit, but that's to be expected. I bought 2 pairs of these for my front and rear turn signals as I replaced them all with LED bulbs from DiodeDynamics. (Posted on 11/29/12)

  13. Perfect Product Review by John
    Quality
    Price
    Value

    Well after arguing with my Honda Dealer for some time as to how these Resistors where to be installed, and having a Tech person watch the video that Diode provides, it turns out that the video IS correct, as was myself. WHAT a hassle working with this Dealer. If Honda doesn't sell a product you want to put on YOUR car, these people will not install it!! HELLO, it is my car and do what I say. The DSM can go take a hike, idiot. (Posted on 11/27/12)

  14. Good stuff. Review by Frank
    Quality
    Price
    Value

    The resistor kit was a quick install with the included splices, and the hyper-blink issue with my turn signals was no more. I haven't had any problems with them heating up, either. Only downside would be that I heard they're cheaper from Radioshack? But you get what you pay for, so I'm fully satisfied. (Posted on 9/19/12)

  15. resistors Review by Alex
    Quality
    Price
    Value

    This item works perfectly with my koup after installing this resistor the hyper blink stopped immediately it is very good for the price. (Posted on 7/28/12)

Worry-free warranty

  • - Full 1-year warranty on all products
  • - No waiting: we usually send new items out with a return label (US customers only)

 

You will get quick help from our trained staff for any issues.

All HID ballasts also carry a lifetime warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Just $5 per order with our Diode Delivers program
  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 2-4 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured

 

International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.


You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:

Returns

30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.

Exchanges

Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.

 

Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.

 

To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!