Front Turn Signal LEDs for 2015-2016 Chevrolet Colorado (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships Monday, September 25 if ordered in the next 2 days, 21 hours and 19 minutes!

Upgrade to LED!
  • Amber
  • Switchback - Cool White (6000K) and Amber
  • HP24 (410 lumens)
  • HP48 (280 lumens)
  • HP11 (310 lumens)
  • XP80 (520 lumens)

A set of 6 ohm resistors and connectors, to slow down the fast-blinking caused by LEDs. Can be used on any vehicle. See install video and information below.

Add to Wishlist

Front Turn Signal LEDs for 2015-2016 Chevrolet Colorado (pair)

More Views

Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)


From the factory, turn signal bulbs are powered by standard incandescent lights that light up amber in color.

Newer luxury vehicles are using LEDs for turn signals, because LEDs offer a crisp, instant on/off, increased brightness, and true, vibrant color. By replacing the bulbs in your vehicle, you can achieve this modern look!

You can even add functionality to your vehicle with switchback bulbs! These light up bright white for running lights instead of dim amber, but still blink amber when you activate the turn signals, for a unique dual-color effect!

The installation is 100% plug-and-play, just replace your factory bulb. The bulb may blink faster since it uses less power, and your vehicle thinks the bulb is out- to fix this, please see "hyperblinking" section below.



HP48: This bulb is non-polar, CK compatible, with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.

HP11: Four side-firing 1.5W-rated Osram LED chips, and one 5W-rated LED chip on top, which is projected by a lens for maximum effective brightness. The bulb is housed in a machined aluminum casing, which provides superior heat diffusion for long life.

XP80: Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.

HP24: 16 amber and 8 white, high-power LED chips. Full aluminum body for durability and advanced digital latching circuit for color control. 6000k, Cool White to match your HIDs or other LED applications. 

Fitment. All three bulbs use a quality inject-molded 7443 terminal, with a standard base connector and proper pin alignment, designed for exact replacement of your factory 7443 bulb.

Included in your order is TWO BULBS.


Amber: These LEDs illuminate in a crisp, bright, amber color.

Switchback Option: Your vehicle may be able to use a specialty bulb known as "switchback." This bulb is only suitable when there is a clear reflector. Normally, your front turn signal lights up half power amber when you turn on your headlights, and flashes full power amber when the turn signal is activated.

By using this dual-filament design, along with an integrated controller chip in the bulb, you can get a very cool effect: the switchback bulb lights up white when your headlights are turned on, and flashes amber when you use the turn signals. When you switch the turn signal off, it "switches back" to white. This allows you to gain a uniform white appearance in the front of the vehicle at night, while still having amber turn signals.

Diode Dynamics only lists amber and switchback bulbs for the front turn signal. This is because other colors, such as white and red, are not legal for front turn signal use. Please view other pages for other colors and applications.


Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: 

The amber bulbs in this listing are dual-brightness, and will illuminate at 60% power for parking/running lamp, and 100% for full turn signal.

HP48: Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on/off of LED technology.
HP11: Slightly higher brightness than OEM bulbs.
XP80: Much brighter than OEM bulbs. These are bright!

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.




LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.

While our bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.


The turn signals on most vehicles will begin to blink fast (hyperblink) when LED bulbs are installed. This is because the new LEDs will use less power than the original bulbs, so your vehicle thinks that the bulb is out and warns you by hyperblinking.

This phenomenon will be the same for every LED bulb on the market- there is no such thing as a "no hyperblink" LED bulb, even though some companies advertise them as such.

Flasher Replacement: Replacing the flasher relay, the module that controls blinking speed, is the easiest option to correct hyperblinking. You can remove the flasher on your vehicle, which is a small relay module under the dash, and replace it with a new flasher designed for LEDs. You will only need one flasher for your vehicle, whether you are replacing just one pair or both sets of turn signal bulbs (front/rear).

Resistor Kit: If you prefer not to change the flasher, you can add resistors to the bulb's circuit, and mimic the power consumption of the original bulb, returning the vehicle to normal turn signal speed. Resistors are a universal fix for any vehicle. Our resistors are 50W, 6 ohm, and come with extra-long connection wires for easy install. If you have both front and rear LED turn signals, you should purchase one set for each pair, to create enough resistance for the whole turn signal circuit. The installation itself takes only 10-15 minutes, and involves making two simple connections. Everything you need is included in the kit. 

Bulb Size 7443, also known as 7444NA
Year 2015,2016
Make Chevrolet
Model Colorado
Application LED Bulbs
  1. Front Turn Signal LEDs for 2015-2016 Chevrolet Colorado (pair) Review by Excellent

    Great product. Easy plug and play installation. (Posted on 7/28/17)

  2. Front Turn Signal LEDs for 2015 Chevy Colorado - Switchback Cool White and Amber HP24 Review by LilBear

    Nice addition to the front lights. Amber when turn signal is engaged. Cool White while driving. Don't forget to install the Resistor. (Posted on 6/25/17)

  3. Great Look Review by Jay

    did quite a bit of research on these, after some back and forth i finally pulled the trigger on these and now that they are installed i wonder why i waited so long. These were the last lights i needed to upgrade now my truck is complete well until i find something else to upgrade. (Posted on 2/22/17)

  4. A Must Get!! Review by Mark

    Recently purchased a 2016 Chevy Colorado and saw these switchbacks when researching LEDs for the new truck. I can't tell you how easy the install was and adding the resisters was a piece of cake. Love the look and can't wait to see what else I can't get from DD! (Posted on 1/7/17)

  5. Perfection in lighting Review by Jeffrey

    After a considerable amount of research into LED replacement bulbs, looking over countless listings, and reading the accompanying never ending useless reviews let me tell you don't waste your time or money elsewhere, diode dynamics will deliver everything you want. Their products are perfect and customer service (most important part to me) is TOP NOTCH! Thank you to Steve and Justin for answering all my questions and assistance with processing my order. The white/amber switch backs are only a small portion of my order and they installed and work exactly if not better than advertised. The only part of the new Colorado that Chevy missed the mark with is the lighting, and diode dynamics bridges the gap giving the truck the modern lighting it deserves. Be sure to order the resistor kit.... Thanks again diode dynamics!! (Posted on 9/28/16)

  6. Only ones that are Plug and Play Review by JoeBob

    Having bought other leds from Amazon, I quickly learned that they did not work. Inserting the bulb one way and parking lights worked, rotate 180 and the turn signals would work but not the parking lights.

    Diode Dynamics bulbs are correctly manufactured to accommodate the correct positive and negative pin outs needed for the 2015 Colorado Pickups. Don't waste your money buying any where else they are NOT compatible.

    Great Job DD!! (Posted on 9/9/16)

  7. Excellent Review by Tracy

    Great product easy to install and bright!!! Just need to design a plug and play resistor that is built in or plugs in between light and harness (Posted on 8/26/16)

  8. Nice and bright Review by Brad

    The switchbacks are very cool looking and work as advertised. Got a compliment from another Chevy Colorado driver that wanted to know where to get them. All in all a good product. Super tight fit getting into position and little stripping of OEM electrical tape to install the resistors was needed. (Posted on 7/30/16)

  9. getting all kinds of compliments Review by chris

    i ordered the switchbacks from a secondary company, after they arrived i ordered more to replace the rest of my lights but thought id do a review on these here too. Overall install was a little tight with putting in the resistors but well worth it, made my truck look like the luxury vehicles the white looks very nice and when i show people they switch to amber for the turn signals they all love it. If I need anymore led bulbs i will be ordering them from here.. extremely fast shipping however i only live a state away. (Posted on 7/17/16)

  10. Excellent Review by Charles

    Installed these in my 2016 Colorado, was amazed at the output. White/Amber switchbacks are very bright, makes my headlights look dim. (Posted on 7/7/16)

  11. HP24 Switchback Review by Trail Boss

    Extremely bright LED. The light output is amazing. (Posted on 5/7/16)

  12. Front turn signal Review by kdogjalapeno

    I installed these this weekend along with a couple of resistors. I do appreciate the new look and will now have to slowly upgrade the rest of my lights to match. Yes, I am cool now! (Posted on 3/29/16)

  13. Quality products and timely delivery Review by Rick

    I purchased the LED Switchback Front Turnlights w/resistors off of the website for my 2015 Chevy Colorado. I am extremely pleased with the product and timeliness of the shipping. They look great and function perfectly! I will most definitely be purchasing all the LED products for my truck in the very near future! Takes a little bit of time to install the resistors due to lack of room in the front of the engine bay but the end resist is worth the time. Highly recommended! (Posted on 3/24/16)

  14. Very Bright Review by Chad

    Crisp modern appearance. Splice connectors that come with the resistor kit could be better quality. The bulb itself is very high quality though. (Posted on 2/6/16)

  15. Perfect! Review by Oscar

    I've ordered the XP80 Amber LEDs. The resistors are a must! These LEDs are much brighter than stock. It gives it a nice modern appearance.

    Please do keep in mind that installing these are tight, there isn't that much room.

    I would definitely recommend this to a friend! (Posted on 1/7/16)

  16. So clean... Review by Shamrock

    These switchbacks really clean up the front end and really add and ups class touch to the lighting...very classy looking. It is however, quite difficult to splice the wires given the difference in gauges between the factory wire and the resistor wire, but it's still a great product for overall. (Posted on 1/2/16)

  17. Sharp looking front end Review by Kevin

    On the Chevy Colorado, these lights are perfect for making your front end look amazing. Installation is only hard if you have never changed the bulbs on your truck before, if you know how ti access them its as easy as that. The resistors were simple to do, a bit cramped to work but very doable (chevys fault on tight quarters) My number one favorite change to my truck. The white/amber switchback adds a highend look to the truck like you see on luxury cars. (Posted on 12/15/15)

  18. Would buy again Review by BlackBowTie

    I bought these switchbacks 2 weeks ago. The first set I got one of em was faulty on the white side but they set a replacement out right away. They look and work as advertised (get the resistors).
    (Posted on 6/17/15)

Worry-free warranty

  • -Full 3-year warranty on all products
  • -No waiting: we usually send new items out with a return label (US customers only)


You will get quick help from our trained staff for any issues.

All Stage Series products carry a limited 8-year warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 3-5 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured


International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:


30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.


Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.


Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.


To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!