TALK TO A LIGHTING EXPERT314-205-3033M-F 9-5 CST

31mm SMF6 LED (Pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships tomorrow if ordered in the next 15 hours and 20 minutes!

$16.00
31mm SMD6 Bulb is a direct replacement for any 29mm-33mm festoon halogen bulb.
  • Warm White
  • Cool White (6000K)
  • Red
  • Blue
  • Amber
  • Green
 
Add to Wishlist

31mm SMF6 LED (Pair)

Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)

FUNCTION

31mm SMD6 Bulb is a direct replacement for almost any 29mm-33mm festoon incandescent bulb.

By changing the factory bulb to an LED, you can illuminate the area with a much brighter light, and add a pure white, luxury look.

The installation is 100% plug-and-play, just replace your factory bulb.

 

BULB DESIGN

This bulb has six 5050-size SMDs. The bulb is made up of a board-shaped base, securely connected to high durability metal terminals. A load resistor is embedded to prevent blowing the LED from voltage surge, and a diode is implanted to protect the LED from reverse polarity. The LED is wired for 12V operation, the kind found on all vehicles.

Included in your order is a pair of bulbs.

 

COLOR

These LEDs are available in crisp, bright colors including Cool White, Warm White, Blue, Red, Amber, and Green.

 We strongly recommend cool white or warm white for the best visibility.

Color Reference Banner

 

BRIGHTNESS 

94 Lumens

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.

 

QUALITY

LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.

While our bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the FAQ guide.

Year N/A
Make N/A
Model N/A
Application N/A
  1. Red Map Lights Review by Safety
    Price
    Value
    Quality

    Decided to try something different. Red lights seem to be less attention grabbing with respect to brightness and don't compete as much when used while driving. Front seats are still more well lit than stock halogens all things considered. I added an LED board to the dome proper to compensate as needed. (Posted on 6/18/16)

  2. Great product. Review by Freddy
    Price
    Value
    Quality

    I bought these LEDs for the dome light on a 2011 CRZ. They are very bright and I bought the 6k, which appear nice and white. My seats are black leather and it gives it a very upscale feel. Definitely recommend buying. (Posted on 5/8/16)

  3. Great Bulbs! Review by Justin
    Price
    Value
    Quality

    These bulbs make the interior light much more usable while giving the car a much higher end feeling. Took me less than a minute per bulb and it is definitely worth it! Fits perfectly in the Elantra GT. (Posted on 3/27/16)

  4. Map lights Review by Chris
    Quality
    Price
    Value

    These bulbs are plenty bright, and cool white. The perfect upgrade. (Posted on 10/13/15)

  5. Dome/Map lights Review by Gabe
    Quality
    Price
    Value

    Installed these on both my girls car and my truck. Both vehicles had 2 map lights and one dome light. Install went easy except on my girls dome light. The bulb was just a little tight to fit but it eventually went in the grooves where it was supposed to. Both vehicles have tint and these are so bright you can see right in so keep that in mind if you don't want that. Other than that no complaints. Very much worth the money! (Posted on 4/18/15)

Worry-free warranty

  • - Full 3-year warranty on all products
  • - No waiting: we usually send new items out with a return label (US customers only)

 

You will get quick help from our trained staff for any issues.

All Off-Road Lighting also carry a limited lifetime warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Just $5 per order with our Diode Delivers program
  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 2-4 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured

 

International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.


You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:

Returns

30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.

Exchanges

Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.

 

Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.

 

To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!