TALK TO A LIGHTING EXPERT314-205-3033M-F 9-5 CST

Fog Light LEDs for 2011-2014 Dodge Challenger (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships tomorrow if ordered in the next 21 hours and 55 minutes!

$40.00
  • Natural White (4000K)
  • Pure White (5000K)
  • Cool White (6000K)
  • Yellow
  • HP48 (280 lumens)
  • XP80 (520 lumens)
  • XML2 (1420 lumens)
 
Add to Wishlist

 Fog Light LEDs for 2011-2014 Dodge Challenger (pair)

More Views

  • HP48
  • XP80
  • XML2
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)

FUNCTION

Fog Light LED bulbs are an excellent way to improve the appearance of your vehicle. From the factory, most vehicles come with halogen bulbs, which project in a yellowish light. By replacing them with LEDs, you can create a modern appearance with the cool white light of LEDs.

The installation is 100% plug-and-play, just replace your factory bulb!

Please note: Fog Light LEDs are primarily for cosmetic upgrade. Some models may not provide an increase in output.


BULB DESIGN

HP48: This bulb is designed with 48 Epistar 3014 LED chips. Thanks to the cap on the top, the light from this High Power Bulb is shined backwards and away from the bulb, not straight out. This means the output is excellent, because it uses the vehicle's housing completely, which then shines the light much more uniformly.

XP80: Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more, under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.

XML2: Two opposing genuine CREE XM-L2 chips, driven at high power by self-contained regulator unit, in an attractive cast-aluminum housing. Fully waterproof, non-polar, modular design. 

Fitment. SMD, HP, and XP bulbs use an inject-molded terminal, with a full-size base connector, designed for exact replacement of your factory bulb. The XML2 bulb fits in the same way, but also requires an additional 2" of clearance behind the bulb socket- see pictures.

Included in your order is TWO BULBS.


COLOR

These LEDs illuminate in a crisp, bright, cool white hue. The XML2 is also available in natural white, pure white, and yellow.


BRIGHTNESS

Diode Dynamics offers several brightness options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb, compared to the factory bulb.

HP48: 265 lumens. Slightly lower brightness than factory.
XP80: 510 lumens. Similar brightness to factory.
XML2: 1410 lumens. Much brighter than factory. These are bright!

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum. 

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.

 

QUALITY

LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as CREE, Epistar, Cree, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size PSX24W
Year 2011,2012,2013,2014
Make Dodge
Model Challenger
Application LED Bulbs
  1. Dodge challenger Review by Eric
    Value
    Quality
    Price

    Easy installation, the lights are extremely bright compared to the factory halogen bulbs. Match as close to perfect as you can get to the factory HID's. More than happy with the purchase. Shipment was fast, ordered on a Wednesday had everything by Saturday. (Posted on 8/2/16)

  2. Huge improvement over stock foglights Review by HEMI R/T
    Price
    Value
    Quality

    OEM fog light bulbs are practically useless and look terrible under the HID lights that the car comes with.
    Diode Dynamics fog light bulbs are very functional and look 10x better.
    I had a little issue with the connector that resulted in the light failing. Justin & Paul took care of everything and got me a replacement shipped out immediately.
    I'm very pleased with he outstanding customer service from DD and recommend their products to anyone wanting to upgrade their bulbs to LED.
    Thanks!!! (Posted on 4/29/16)

  3. Bright as hell! Review by Jason
    Price
    Value
    Quality

    Just installed these, and even in the day time, I can tell an immediate difference in light output. Makes the stock ones look pathetic by comparison! My only gripe is that these are apparently left/right specific. They are not labelled as so. I thought that I had received the wrong kit at first, but then I tried the other bulb and it plugged right in. If you are lowered with oversize tires, you will need to take the wheel off, unfortunately. Even then, it's still a royal PITA to get back there, even if you take a good portion of the fender liner off. If you plan to upgrade the side markers, I suggest you do them at the same time. It took me 2.5 hours start to finish. (Posted on 2/20/16)

  4. Excellent Review by Terry
    Price
    Value
    Quality

    Top notch quality. Great value. And beautiful color. Matched my HID headlight color perfectly. Highly recommend. (Posted on 2/14/16)

  5. Awesome replacement for stock halogens Review by Johann
    Price
    Value
    Quality

    I had been putting off the purchase of these bulbs for a while but finally broke down and purchased them. The color matches perfectly with my flashback led bulbs but is slightly off from the HIDs, but none the less I am pleased with the product (Posted on 12/22/15)

  6. AMAZING PRODUCT Review by Franco
    Price
    Value
    Quality

    I bought my new fog lights about a week ago and I get a lot of compliments on the quality and brightness that DD offers.
    I literally don't have to turn on my HIDS at all I run the fogs alone that's how bright they are. AMAZING product thanks DD. (Posted on 11/25/15)

  7. LED Foglights fantastic product and excellent support! Review by Bob
    Price
    Value
    Quality

    Called DD and had questions about the proper color temperature to match the factory HID headlights. Your rep. suggested the 5000k as to be the closest match to the factory 4300k HID's. I installed them and thought they were a little more white than I expected. I contacted customer support and was answered by Justin, fantastic support, ordered the 4000k bulbs and installed one on one side to compare the color temperature. Justin was absolutely correct, the 5000k was the better match. They sent a RMA for the 4000k bulbs and I returned them. I am so very happy I could see the difference in the color myself. Long story short, if you want great, matching Fog lights for your Dodge Challenger go with the 5000k XML2 bulbs. They are very bright and match the factory HID's. Love the look and brightness. I will be happy with my next order from DD. A big thank you to Justin!!! (Posted on 10/21/15)

  8. Challenger Fog LED"s Review by Dodgehemi61
    Price
    Value
    Quality

    These yellow dog LED's are a nice upgrade to compliment my switchback lights for a true retro look. (Posted on 5/17/15)

  9. Good LED Fog Lamp Review by Mike
    Price
    Value
    Quality

    Was a little taken back when my dealership told me I had to buy an entire fog lamp assembly for a burned out bulb. Found Diode Dynamics and as an electrical engineer thought they at least said the right things and designed the heat sinks to handle the LED. Was impressed when they arrived and even more so with the light output. Coupled with the reflector in the fog lamp assembly I think this puts out more than stock lamps. We will see how they last over time but I think they will do just fine.

    I would have rated this higher however I had issues with the LED fitting into the fog lamp assembly. With the O-ring installed I was not able to latch the LED into the assembly. I lubricated the o-ring but in the end I had to remove it and us dielectric grease in the o-ring grove instead. Luckily these are in a pretty protected area. Seems like some of the geometry is a little off on the connector. I measured the o-ring groove on the stock lamp and LED and found the LED assembly was about 1/2mm larger diameter than stock. As close as I was to be able to latch I think this half mm made the difference. (Posted on 12/15/14)

  10. Exactly what I needed Review by Thelos
    Price
    Value
    Quality

    Perfect white lights for replacing the yellowish factory fogs, great product, easy plug n play. Probably one of the easiest installs ever. Happy customer! (Posted on 11/24/14)

  11. PERFECT Review by iHemi
    Price
    Value
    Quality

    Exactly what I was looking for. Nice white glow. Will be ordering again. (Posted on 10/12/14)

  12. perfect Review by glide
    Price
    Value
    Quality

    Nice upgrade to compliment my hid low beams (Posted on 7/15/14)

  13. I can't wait to get my new pair. Review by Derek T.
    Price
    Value
    Quality

    I had a pair of these bulbs I bought used and after two years one bulb went out on me. I use my fog lights every time I turn my car on. So buying them used and having them last this long was awesome in itself. The brightness and color is great and adds so much to the look of the car. Well worth the money! (Posted on 4/26/14)

  14. Excellent brightness...Stage 2 Review by Rich S.
    Price
    Value
    Quality

    2013 Challenger
    You will love these LED's and for a great price. Good Value.
    Hardest part of the plug and play is just getting access to the back of the foglamp!
    See submitted pics...Left side is LED, right side is factory.
    See the daytime image for brightness...very good even on the brightest day. (Posted on 3/8/14)

  15. Finally a great LED Foglight Review by Steven
    Value
    Quality
    Price

    I am very impressed by the quality, ease of installation and functionality of these fog lights. The '11 model Challengers and up use the same bulb listed as a '13 here. I am in the Pacific Northwest where fog is an issue and I'm happy to say these are a fantastic upgrade from the stock bulb. (Posted on 11/11/13)

This product is a direct replacement. Install as follows:

Remove your factory bulb

  1. 1. Unclip factory connector.
  2. 2. Unclip bulb and remove from socket.

 

Install your new LED bulb

  1. 1. Plug LED bulb into factory connector. 
  2. 2. Insert bulb into socket, and clip the top and bottom clips to lock in place. That's it!

Worry-free warranty

  • - Full 3-year warranty on all products
  • - No waiting: we usually send new items out with a return label (US customers only)

 

You will get quick help from our trained staff for any issues.

All Off-Road Lighting also carry a limited lifetime warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Just $5 per order with our Diode Delivers program
  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 2-4 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured

 

International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.


You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:

Returns

30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.

Exchanges

Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.

 

Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.

 

To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!