TALK TO A LIGHTING EXPERT314-205-3033M-F 9-5 CST

Backup LEDs for 2009-2014 Ford F-150 (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships today if ordered in the next 9 hours and 26 minutes!

$20.00
Upgrade to LED!
  • HP5 (92 lumens)
  • HP36 (210 lumens)
  • XP50 (410 lumens)
 
Add to Wishlist

Backup LEDs for 2009-2014 Ford F-150 (pair)

More Views

  • STOCK
  • HP36
  • XP50
  • COLLAGE
  • HP5
  • HP36
  • XP50
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)

BULB DESIGN

HP5: Four high-power SMDs, under a diffusing lens. Just like the HP3, but run at higher power, with integrated copper plating for superior heat dissipation, allowing maximum brightness.

HP36: Full 360 degree illumination with 36 High-Power Samsung LEDs. Aluminum base for optimum heatsinking, and non-polar design for easy installation.

XP50: Each of the four sides of this bulb contains two 5W-rated chips, and the top is fitted with two more under a projector lens. Housed in an aluminum casing with textured finish for maximum heatsinking properties.

Fitment. All three bulbs use a quality inject-molded 921 terminal, with a sturdy base connector and proper pin alignment, designed for exact replacement of your factory 921 bulb. You will not need resistors for backup lights. Just replace the factory bulb.

Included in your order is TWO BULBS.


COLOR

These LEDs illuminate in a crisp, cool, bright, white hue for maximum light output.


BRIGHTNESS

Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: 

HP5: Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on/off of LED technology.
HP36: Slightly higher brightness than OEM bulbs.
XP50: Much brighter than OEM bulbs. These are bright!

Lumens. BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.

 

QUALITY

LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size 921, also known as 904 904NA 906 906NA 912 916 916NA 917 920 922
Year 2009,2010,2011,2012,2013,2014
Make Ford
Model F-150
Application LED Bulbs
  1. These lights work if you do *not* have a backup warning system Review by Sifu128
    Price
    Value
    Quality

    If you have a backup warning system you can not use these lights. They are top quality grade, however the lights from the factory are LED's and built in due to the backup warning sensor taking the place of where the backup light would be. (Posted on 10/27/16)

  2. Insane brightness! Review by Heather
    Price
    Value
    Quality

    I have a 2013 F150 with a back up camera. My windows are tinted fairly dark and at night, its impossible to see anything behind the truck, also the only way to really see anything in the backup camera is to apply the brake lights. I spent the extra money and went with the xp50 lights and they really light up the back up camera at night even though ford put the light in a poor location. Highly recommend! (Posted on 9/23/16)

  3. I can see Review by Roger
    Value
    Quality
    Price

    When I got my 2011 f150 ecoboost lariat, I could barely see anything at night in my rearview camera. Installed these xp94 and now it's daylight behind me. (Posted on 8/15/16)

  4. Great Product! Review by Built Ford Tough
    Value
    Quality
    Price

    I purchased the XP50s and they are pretty good, especially with a backup camera. Granted, the location of the light housing on the 09-14 F-150s is bad so the light output isn't completely bright on a backup camera but it does the job. One of my bulbs does fit loose though and will wiggle out of place and the light won't work until I reattach it properly every few days. (Posted on 7/19/16)

  5. Like night and day difference. Review by Dee
    Price
    Value
    Quality

    I went with the XP50. It was an easy installation and swap out of the OEM bulbs. They are worth the money and makes a extremely big difference in your visibility at night in any backing location. Would highly recommend. Thanks for a great product. (Posted on 6/13/16)

  6. F150 Backup Lights Review by AVB
    Price
    Value
    Quality

    The LED bulbs are bright and the fitment is fine. The 2011 F150 has such a small lens cover for the backup lights that it still doesn't light up the back of the vehicle for the camera. I recommend going with the brightest bulb if you have the small lens opening (Posted on 5/31/16)

  7. Great product Review by SA
    Price
    Value
    Quality

    Bulbs are well made and fit great. The XP50's are very bright. Backup camera now looks like daylight at night. (Posted on 4/1/16)

  8. Big Difference Review by Jeff Y
    Price
    Value
    Quality

    Upgraded from the OEM replacements and made a huge difference in the back up cam. (Posted on 3/26/16)

  9. Great product Review by Dirt
    Price
    Value
    Quality

    The bulbs work good with my reverse camera and give me plenty of light on the sides and act like spotlights for distance. overall the bulbs are much brighter than stock and perform as described. (Posted on 12/20/15)

  10. Now I can actually see when backing up Review by Ducatti20
    Price
    Value
    Quality

    Installed the XP50's in my F150 with backup camera, so much brighter than stock. Now I can backup at night and actually see everything behind me vs the darkness rom before. The lights put out significantly more light than stock. Great purchase! And fast shipping too... no complaints at all. (Posted on 11/7/15)

  11. Best light output from reverse lights! Review by KJ4BUP
    Quality
    Price
    Value

    I got the XP50s for the reverse lights in my 2014 F-150 because the factory bulbs are not bright enough. These however are more than adequate! I can actually see what is behind me when looking in the mirrors now. I have done a lot of research on LED reverse bulbs and I am glad I chose these! I will definitely be making future purchases. (Posted on 10/13/15)

  12. XP50 Back Up LEDs Review by 12 F150
    Value
    Quality
    Price

    I purchased these from Stage 3 Motorsports. The bulbs arrived very quickly and in perfect condition. I was looking for a bulb to light up my trailer and make it easier to hitch at night. These did the job and then some!! It's like having an extra set of headlights in the rear! (Posted on 7/7/15)

  13. Much brighter than stock Review by EF
    Price
    Value
    Quality

    Installed the XP50 in a 2014 F150. Literally plug and play. Much brighter than OEM. Best LED bulbs I've come across and I've tested a bunch. Worth the $$ (Posted on 3/18/15)

  14. Wow what a DIFFERENCE! Review by Chase
    Price
    Value
    Quality

    I ordered XP50 and wow what a difference (see pic). They went into my 2012 FX4 for reference. Plug and play, easy installation. Work great especially if you have back up camera because the stock ones IMO don't even work. It's like having two small head lights projecting backwards when in reverse. Look forward to purchasing more products. Highly Recommended. (Posted on 1/22/15)

  15. Great Product and Price Review by Bobby McAtee
    Quality
    Price
    Value

    Excellent product, it is very cheap compared to other LED bulbs, and is of excellent Quality. I ordered the XP50 and they are extremely bright and look excellent. I would definitely recommend this to others. (Posted on 1/1/15)

Backup LEDs are a direct replacement. Just change the bulb! You will not need any resistors or other accessories.

Remove your factory bulb

  1. 1. Access the bulb or tail light. You may need to pull back the trunk/cargo carpet and/or unscrew the visible nuts holding the light in.
  2. 2. Remove the backup bulb socket by twisting counterclockwise.
  3. 3. Remove the factory bulb from the socket.

 

Install your new LED bulb

  1. 1. Plug new LED bulb into socket by pushing it in fully.
  2. 2. Test the function of the bulb. If it does not work, remove it, rotate, and reinstall in the socket.
  3. 3. Insert socket back into place, and reassemble as necessary. That's it!

Worry-free warranty

  • - Full 3-year warranty on all products
  • - No waiting: we usually send new items out with a return label (US customers only)

 

You will get quick help from our trained staff for any issues.

All Off-Road Lighting also carry a limited lifetime warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Just $5 per order with our Diode Delivers program
  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 2-4 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured

 

International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.


You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:

Returns

30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.

Exchanges

Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.

 

Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.

 

To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!