TALK TO A LIGHTING EXPERT314-205-3033M-F 9-5 CST

License Plate LEDs for 2008-2014 Dodge Challenger

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships tomorrow if ordered in the next 17 hours and 56 minutes!

$5.00
  • Natural White (4000K)
  • Red
  • Pure White (5000K)
  • Cool White (6000K)
  • Warm White
  • Blue
  • Green
  • Amber
  • SMD2 (24 lumens)
  • HP3 (56 lumens)
  • HP5 (92 lumens)
 
Add to Wishlist

License Plate LEDs for 2008-2014 Dodge Challenger

More Views

  • HP3
  • HP5
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)

FUNCTION

License plate bulbs are used to illuminate the rear license plate on your vehicle. From the factory, the bulbs are incandescent, lighting up in a yellowish color.

Newer luxury cars use LED modules to illuminate the license plate with modern, cool white light. By changing your license plate bulbs to LED, you can easily add this luxury look to your vehicle! 

The installation is 100% plug-and-play, just replace your factory bulb.

 With low price and easy install, this is one of the best, easiest modifications you can do to improve how your car looks at night.

 

BULB DESIGN

SMD2: Similarly compact design, with two 5050-size Epistar SMD chips, driven at high power for maximum effective brightness. Outputs at 180 degrees.

HP3: One high-power SMD under a diffusing lens for truly even output (no hotspots). Constant current design and air-cooled base for superior reliability. Features dual contact pins and nonpolar function for easy installation.

HP5: Four high-power SMDs, under a diffusing lens. Just like the HP3, but run at higher power, with integrated copper plating for superior heat dissipation, allowing maximum brightness.

Fitment. All bulbs use a quality inject-molded 194/168 T10 terminal, with a full-size base connector and proper pin alignment, designed for exact replacement of your factory 194 bulb. Just remove the old bulb, and plug in the new LED.

Included in your order is TWO BULBS.


COLOR

These LEDs are available in crisp, bright colors including White, Warm White, Blue, Red, Amber, and Green.

 We strongly recommend white or warm white for license plate applications- the other colors are illegal in most areas. Please check your local laws before ordering.

Color Reference Banner


BRIGHTNESS

Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb:

SMD2: Slightly higher brightness than OEM bulbs.
HP3: Much brighter than OEM bulbs. These are bright!
HP5: Nearly triple the brightness of stock OEM bulbs!

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.

 

QUALITY

LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size 194, also known as T10 W5W W3W 147 152 158 159 161 168 184 192 193 259 280 285 447 464 501 555 558 585 655 656 657 1250 1251 1252 2450 2652 2821 2921 2825 175
Year 2008,2009,2010,2011,2012,2013,2014
Make Dodge
Model Challenger
Application LED Bulbs
  1. Great upgrade Review by Gurtej
    Quality
    Price
    Value

    A cheap cost, high rewarding upgrade to your Dodge Challenger! The output of the light is really nice and clear. Much better than the stock look. Got myself the red colored ones and they give it that car show look! Would recommend all products from Diode Dynamics. (Posted on 9/5/16)

  2. Nice upgrade Review by Carlos
    Value
    Quality
    Price

    I bought the hp5 bulbs for my 2014 Dodge Challenger and they're great. Looks more modern and visible now. (Posted on 8/15/16)

  3. They do not fit the 2016 Dodge Challenger Review by Eric P
    Value
    Quality
    Price

    I bought these because they were listed as for the 2016 model. Upon arrival (which was fast) I went out to the car and pulled out the housing and quickly realized that dodge changed over to a seal LED unit of their own. Only problem with it is the clip that holds it is brittle and broke off. Now I have to go on Monday to the dealer and buy a new one. I'll keep the bulbs they shipped because of the high quality and I can probably use them somewhere else later (Posted on 7/9/16)

  4. Great! Review by Franco
    Value
    Quality
    Price

    If your looking for great output and brightness go with the leaders
    DIODE don't settle for cheap and low quality flickering lights
    (Posted on 6/23/15)

  5. Great Product Review by Sean
    Quality
    Price
    Value

    I initially bought the stage 1 LED Bulbs, and wasnt exactly what i wanted, so i contacted DD and without hassle they shipped my new Stage 2 LED bulbs in no time. I installed them and they are perfect just what i wanted and fast shipping to Canada. Customer Service was fantastic best service i have gotten from ordering a product online! recommend them to anyone, thank you DD!! (Posted on 4/2/15)

  6. Cool mod Review by Glide
    Quality
    Price
    Value

    Way better looking then stock nuff said !!!!!!! (Posted on 7/1/14)

  7. Perfect Review by CMC
    Price
    Value
    Quality

    I went with stage 2 in cool white, and it works great and look so much better then that stock yellow!!! (Posted on 6/3/14)

  8. Big difference from OEM Review by Rich
    Quality
    Price
    Value

    Easy upgrade and Spot on results. I added stage 2 LEDs to the plate. Big difference from OEM. White, clean, crisp illumination. As stated in another review, comes as a two pack and only needed one on my '13 Challenger SXT+.
    Can't miss upgrade.
    Really like DD products! Haven't had a bad one yet and don't expect to. (Posted on 3/22/14)

  9. Perfect Quality Review by BlackenedSRT
    Quality
    Price
    Value

    Great price, works like it should, and it's a cheap mod.. FYI I have a 2009 SRT Challenger.. and this comes in a pack of two and there's only one blub on the car. (Posted on 2/23/14)

  10. Great Quality and Ease of instal Review by C13RT
    Price
    Value
    Quality

    I received these in a timely manner and with time, a Gerber tool and a flash light I was able to remove the license plate light cover, remove the stock halogen bulb and replace it with this quality led bulb. I went from a white color to a red light color and I love it. Thanks Diode Dynamics (Posted on 12/15/13)

  11. Even better than I thought it would be Review by Willy
    Price
    Value
    Quality

    Once I figured out the way Dodge had the license plate light screwed in and guaranteed to make you curse the Gods of Mopar, it was very easy to install. Well, the light part was :) It looks awesome and is bright enough that I even have the blue light on the ground at the rear of the car. It looks awesome in person. DD is a great source. Uploading pics now! (Posted on 11/8/13)

Installation

Level of Difficulty: 1/10

Just unplug your factory bulb, and replace it with the new LED one. It is a direct replacement for your vehicle.

Accessing the bulb itself is quite easy. Usually, it is held in by two tabs, and you can pop it out from the outside of the vehicle. In some cases, you will need to remove a few screws, which are clearly visible. Finally, it may be held by clips from the inside, accessible when you open the hatch or trunk.

If it does not work the first time, try flipping it around in the socket, as all LEDs require the correct polarity.

Worry-free warranty

  • - Full 3-year warranty on all products
  • - No waiting: we usually send new items out with a return label (US customers only)

 

You will get quick help from our trained staff for any issues.

All Off-Road Lighting also carry a limited lifetime warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Just $5 per order with our Diode Delivers program
  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 2-4 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured

 

International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.


You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:

Returns

30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.

Exchanges

Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.

 

Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.

 

To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!