Backup LEDs for 2008-2014 Dodge Challenger (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships tomorrow if ordered in the next 23 hours and 49 minutes!

Upgrade to LED!
  • HP5 (92 lumens)
  • HP36 (210 lumens)
  • XP50 (410 lumens)
Add to Wishlist

Backup LEDs for 2008-2014 Dodge Challenger (pair)

More Views

  • HP6 vs. Stock
  • HP6 vs. Stock
  • SMD13
  • SMD13
  • Stock
  • SMD13
  • HP5
  • HP36
  • XP50
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)


HP5: Four high-power SMDs, under a diffusing lens. Just like the HP3, but run at higher power, with integrated copper plating for superior heat dissipation, allowing maximum brightness.

HP36: Full 360 degree illumination with 36 High-Power Samsung LEDs. Aluminum base for optimum heatsinking, and non-polar design for easy installation.

XP50: Each of the four sides of this bulb contains two 5W-rated chips, and the top is fitted with two more under a projector lens. Housed in an aluminum casing with textured finish for maximum heatsinking properties.

Fitment. All three bulbs use a quality inject-molded 921 terminal, with a sturdy base connector and proper pin alignment, designed for exact replacement of your factory 921 bulb. You will not need resistors for backup lights. Just replace the factory bulb.

Included in your order is TWO BULBS.


These LEDs illuminate in a crisp, cool, bright, white hue for maximum light output.


Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb: 

HP5: Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on/off of LED technology.
HP36: Slightly higher brightness than OEM bulbs.
XP50: Much brighter than OEM bulbs. These are bright!

Lumens. BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.



LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size 921, also known as 904 904NA 906 906NA 912 916 916NA 917 920 922
Year 2008,2009,2010,2011,2012,2013,2014
Make Dodge
Model Challenger
Application LED Bulbs
  1. Amber front turn signal LED's Review by Bob

    I installed these LED's to go with, complement, the HD Halo's that I ordered. Love the LED's.
    Disappointed that the 160mm Amber halos haven't been shipped. Talked with Corey and he informed me that the QC test didn't pass. And that they have problems with all halo's 130mm and bigger. Hope they find the problem and ship very soon. It's been almost a month since I ordered them.
    P.S. Read my review on the red LED rear lights and back up lights, also I installed LED fog light bulbs. They match the factory HID's well. Looks like I am going to have a diode dynamic car very soon.
    Keep up the good work! (Posted on 8/10/16)

  2. Very Satisfied! Review by AJ

    I bought the brightest option for these LEDs and they are just perfect! Installation was pretty straightforward too. Receive compliments all the time on how good they look! There just might be a few new customers headed your way DD haha! (Posted on 4/24/16)

  3. Don't buy LEDs anywhere else!! Review by Flash79

    Replace stock reverse lights with the hp36 bulbs and WOW! Brighter, shine farther and look better too!! DD has a great staff, very informed as well. (Posted on 2/9/16)

  4. Don't buy LEDs any where else!! Review by Flash79

    Purchased the hp36 bulbs to replace stock bulbs, way brighter, cool white color, light shines out farther as well. DD is a great company to buy from, very friendly and informed staff (Posted on 2/9/16)

  5. Backup LEDS Review by Anthony

    These LEDs are great, much brighter than the stock output. Easy to install, just plug in and go. (Posted on 9/29/15)

  6. Awesome lights Review by Franco

    I bought the $90 option and satisfied. These lights are BRIGHT!
    Im getting compliments left n right . Worth the price for good quality LEDS (Posted on 6/23/15)

  7. Another Flawless order Review by CmC

    Light came quick and work perfectly, this is why i kept coming back and only use DD products on my challenger. (Posted on 2/12/15)

  8. Clean, Crisp, and simply awesome Review by Rich S.

    I had these LED's from DD for a few weeks in my trunk while I waited to carve out some time to do sequential turn signal modification at the same time. Gaining access to the trunk lid light assembly is the hardest part as these are plug and resistor kit needed. The LED housing fits snugly through the hole in the housing and seats perfectly in the OEM base. Stage 2 is definitely brighter than OEM bulbs and is much cleaner and crisp. I almost elected to go stage 3, but decided stage 2 would be more than sufficient and would align with the other LED's already installed. I weighed it against the relative darkness of where I typically back into as well, so stage 2 fills the area with PLENTY of light. DD products are top shelf in quality and I will stay a fan of DD with these back up LED's. You've heard the saying..."MOPAR or no car", well its "DD LED or drive only in daytime when no lights are needed" (Posted on 5/14/14)

Backup LEDs are a direct replacement. Just change the bulb! You will not need any resistors or other accessories.

Remove your factory bulb

  1. 1. Access the bulb or tail light. You may need to pull back the trunk/cargo carpet and/or unscrew the visible nuts holding the light in.
  2. 2. Remove the backup bulb socket by twisting counterclockwise.
  3. 3. Remove the factory bulb from the socket.


Install your new LED bulb

  1. 1. Plug new LED bulb into socket by pushing it in fully.
  2. 2. Test the function of the bulb. If it does not work, remove it, rotate, and reinstall in the socket.
  3. 3. Insert socket back into place, and reassemble as necessary. That's it!

Worry-free warranty

  • - Full 3-year warranty on all products
  • - No waiting: we usually send new items out with a return label (US customers only)


You will get quick help from our trained staff for any issues.

All Off-Road Lighting also carry a limited lifetime warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Just $5 per order with our Diode Delivers program
  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 2-4 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured


International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:


30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.


Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.


Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.


To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!