Trunk Light LED for 2000-2016 Ford Focus

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships tomorrow if ordered in the next 21 hours and 38 minutes!

  • Red
  • Cool White (6000K)
  • Warm White
  • Blue
  • Green
  • Amber
  • HP3 (56 lumens)
  • HP5 (92 lumens)
  • SMD12 Board (118 lumens)
  • FlexLight (200 lumens)
Add to Wishlist

Board SMD12

More Views

  • 2014 Ford Focus Trunk Light comparison collage
  • 2014 Ford Focus with a HP3 Cool White Trunk Light
  • 2014 Ford Focus with a HP5 Cool White Trunk Light
  • Board SMD12
  • Flex Light
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)


Trunk lights are used in the trunk or cargo area to illuminate the space at night. From the factory, the bulbs are incandescant, lighting up in a yellowish color.

By changing the factory bulb to an LED, you can illuminate the area with a much brighter light, and add a pure white, luxury look.

The installation is 100% plug-and-play, just replace your factory bulb.



SMD12 Board: Also an LED panel, with 12 SMD chips. Due to the increased size, this may need to be mounted to the exterior of the trunk light housing.

FlexLight: This is a 20-inch, low-profile LED strip, with 30 5050-size Epistar SMD chips, with adapters for universal installation. Mounts in your trunk area, flexible and waterproof, for maximum brightness.

PLEASE NOTE: SMD12 Board is an LED board, which may mount to the exterior of your trunk light housing. FlexLight is an LED strip, which plugs into your factory trunk light socket, and mounts directly into your trunk area using included adhesive strips or velcro. We offer the Boards and FlexLight for those who want to maximize brightness.

Included in your order is ONE BULB.


These LEDs are available in crisp, bright colors including White, Warm White, Blue, Red, Amber, and Green.

 We strongly recommend white or warm white for the best visibility.

Color Reference Banner


Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb:

SMD12 Board: Much brighter than OEM bulbs. These are bright!
FlexLight: Extremely bright compared to OEM bulb.

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.



LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size No
Year 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016
Make Ford
Model Focus
Application LED Bulbs
  1. Great product Review by Lolo

    Install was easy, the light is great quality, and shipping was super fast. Would order from this site again without hesitation. (Posted on 7/15/17)

  2. Best LED bulbs...anywhere, any price. Review by Frank

    I've been purchasing LEDs to replace incandescent bulbs in my vehicles from Diode Dynamics for the past four years. Their products and customer service are top notch and I always receive my order within three days after placing it. My 2017 Focus comes standard with mostly LEDs in the interior, however the trunk utilizes incandesents and I wanted to upgrade. I was completely satisfied after installing. I went with the SMF2 in the natural white color, and they are perfect! (Posted on 5/25/17)

  3. Great quality for the price! Review by Toadster

    These simple 194 replacement HP5 bulbs were amazing in light output in our Focus ST hatch - highly recommended! (Posted on 3/20/17)

  4. Good but.... Review by ADGUY

    First off, the quality and value of the product is spot on. No trouble there.

    However, these are NOT a pop in and go product. You will have to trim and modify your lenses if you want them to fit factory.
    Also, it is VERY difficult to get these LED panels to sit properly in factory opening.

    Lastly, the connectors on the LED panels had too much wire in the connector causing me to blow a fuse as I had to wiggle wires to get lights to stay on.

    Looks great once you put the work in.
    (Posted on 10/1/16)

  5. Looks Great! Review by Jordan

    Purchased these to get rid of the nasty incandescent bulbs. Easy to install, great quality, and shines bright! As others have said, the hatchback has 2, so be sure to order accordingly! (Posted on 6/17/16)

  6. Awsome product! Review by Chad

    Have 16 focus st and spliced 1 smd12 in red on each side with red hp5 in factory location. Both products are worth every penny. Great quality, affordable, and great light out put....even in red! (Posted on 6/3/16)

  7. Love it! Review by Aaron

    I purchased one of the HP5's in Red for my 2011 Charger glove box. These suckers are bright! The light goes great with the red leather interior of the car and makes it very easy to see the contents of the glove box. (Posted on 4/5/16)

  8. Great product Review by Justin

    Great product, extremely bright and was exactly what I was looking for. The product is great but the customer service is top notch. Will not hesitate to purchase again. (Posted on 3/21/16)

  9. Make sure you buy two. Review by Neil

    The Ford Focus (at least the hatchback) uses two of these bulbs, so make sure you order two. These vastly improve the illumination of the interior, the bulbs are of great quality, quick and easy install. I would highly recommend them. However, again, buy two. (Posted on 10/11/15)

  10. Much better then other LEDs I have used Review by Mike_Mac

    Excellent quality and light distribution. Other leds I have used where blotchy with alot of hot spots. This provides a nice bright uniform output.

    (Posted on 7/26/15)

Worry-free warranty

  • -Full 3-year warranty on all products
  • -No waiting: we usually send new items out with a return label (US customers only)


You will get quick help from our trained staff for any issues.

All Stage Series products carry a limited 8-year warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 3-5 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured


International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.

You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:


30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.


Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.


Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.


To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!