TALK TO A LIGHTING EXPERT314-205-3033M-F 9-5 CST

License Plate LEDs for 1998-2016 Nissan Altima Coupe (pair)

You could receive 20 Diode Points for writing a review for this product.

Availability: In stock

Ships Monday, December 5 if ordered in the next 2 days, 19 hours and 37 minutes!

$5.00
  • Natural White (4000K)
  • Red
  • Pure White (5000K)
  • Cool White (6000K)
  • Warm White
  • Blue
  • Green
  • Amber
  • SMD2 (24 lumens)
  • HP3 (56 lumens)
  • HP5 (92 lumens)
 
Add to Wishlist

License Plate LEDs for 1998-2016 Nissan Altima Coupe (pair)

More Views

  • HP3
  • HP5
Customer Images
Earn $1.00 store credit! Upload a picture of this product installed for 20 Diode Points. (2MB limit)

FUNCTION

License plate bulbs are used to illuminate the rear license plate on your vehicle. From the factory, the bulbs are incandescent, lighting up in a yellowish color.

Newer luxury cars use LED modules to illuminate the license plate with modern, cool white light. By changing your license plate bulbs to LED, you can easily add this luxury look to your vehicle! 

The installation is 100% plug-and-play, just replace your factory bulb.

 With low price and easy install, this is one of the best, easiest modifications you can do to improve how your car looks at night.

 

BULB DESIGN

SMD2: Similarly compact design, with two 5050-size Epistar SMD chips, driven at high power for maximum effective brightness. Outputs at 180 degrees.

HP3: One high-power SMD under a diffusing lens for truly even output (no hotspots). Constant current design and air-cooled base for superior reliability. Features dual contact pins and nonpolar function for easy installation.

HP5: Four high-power SMDs, under a diffusing lens. Just like the HP3, but run at higher power, with integrated copper plating for superior heat dissipation, allowing maximum brightness.

Fitment. All bulbs use a quality inject-molded 194/168 T10 terminal, with a full-size base connector and proper pin alignment, designed for exact replacement of your factory 194 bulb. Just remove the old bulb, and plug in the new LED.

Included in your order is TWO BULBS.


COLOR

These LEDs are available in crisp, bright colors including White, Warm White, Blue, Red, Amber, and Green.

 We strongly recommend white or warm white for license plate applications- the other colors are illegal in most areas. Please check your local laws before ordering.

Color Reference Banner


BRIGHTNESS

Diode Dynamics offers several brightness options so you can choose what fits you best.  These options are listed by the design and the lumen output of each bulb:

SMD2: Slightly higher brightness than OEM bulbs.
HP3: Much brighter than OEM bulbs. These are bright!
HP5: Nearly triple the brightness of stock OEM bulbs!

Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.

These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.

 

QUALITY

LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.

While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.

Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.

Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.

Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.

All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.

Bulb Size 194, also known as T10 W5W W3W 147 152 158 159 161 168 184 192 193 259 280 285 447 464 501 555 558 585 655 656 657 1250 1251 1252 2450 2652 2821 2921 2825 175
Year 1998,1999,2000,2001,2002,2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013,2014,2015,2016
Make Nissan
Model Altima Coupe
Application LED Bulbs
  1. Order these! Review by Carlton
    Price
    Value
    Quality

    Very bright, lights up the whole back bumper and the ground below. Fast shipping and great customer service . (Posted on 4/29/16)

  2. Very satisfied Review by Daniel
    Price
    Value
    Quality

    I bought the HP3 for my 2009 Altima coupe and they are just the right brightness and look very sharp. The LEDs are great quality and have a low cost. (Posted on 1/28/16)

  3. Excellent!!! Review by Trey
    Price
    Value
    Quality

    Extremely bright, great quality and easy installation. Looks great in my car and gives a new modern look. I highly recommend these if you plan to upgrade your bulbs to LEDs! (Posted on 1/9/16)

 

You can find a downloadable and printable PDF of this information here.

 

LED Bulb Installation


Congratulations on your purchase of premium Diode Dynamics LED bulbs! You will soon experience a modern LED look on your vehicle.

This universal guide will assist in the installation of LED bulbs on any vehicle. There are more installation instructions, including videos, available on our website at www.diodedynamics.com/install

You can also contact us at any time via email or phone if you need any assistance.

Please note that this serves only as a guide, and Diode Dynamics is not responsible for any damage or loss caused by installation. By installing these products, the user acknowledges and agrees to be responsible for any risk and damaged caused. Our award-winning, worry-free warranty only applies with proper installation of the items, as described, and does not cover installation error

 

INTERIOR AND LICENSE PLATE LEDS

First, you will need to access the factory bulb. Usually, this can be done simply by using a Diode Dynamics Installation Tool or other small flathead screwdriver, and carefully popping the clear lens off of the map, dome, trunk, or license plate light. The lens is almost always simply held in by small clips, and usually you can find a small slit on one side, where they are meant to be removed.

Some license plate lights also have screws to access the bulb.

Once you have removed the factory bulb, simply replace it with the new LED bulb. If it does not work at first, simply flip it around and try again. It needs to be installed in the correct direction.

Most vehicles will use two types of bulbs for the interior:

                Wedge (194)                        or            Festoon (31mm, 36mm, etc)

Wedge/194 Bulbs: When installing wedge bulbs, make sure you also adjust the pins on the end of the bulb, in order to ensure that the bulb makes contact in the socket. Simply pull the small metal pins out and away from the plug on the LED bulb. The bulb may not work properly if the pins are not making full contact in the socket, and every socket is different as far as how tight it is.

Festoon Bulbs: Sometimes, a slight adjustment of the socket will be needed in order to ensure a good, secure fitment on the new LED bulb. You may need to either bend the tabs on the socket, holding the bulb, farther out or in to accommodate the new LED bulb. Gently push the tabs out or in until they are at the desired width for the new LED bulb to fit in snugly.

LED Boards: In order to get a brighter light in the socket, we sometimes recommend the use of LED boards along with an adapter. Simply unplug the factory bulb and plug the board's adapter into place. Then, stick the board into any position possible. Hold in place for 5-10 seconds to ensure adhesion. You may need to mount it on the outside of the lens, especially for some trunk lights.

 

TURN SIGNAL AND TAIL LIGHT LEDS

First, you will need to access the factory bulb. Look in your owner's manual for information on changing the bulb.

When you have the factory bulb uninstalled, simply plug in the new bulb and twist to secure it in place. If it does not work the first time, flip it around in the socket, if possible. Be sure to check to make sure it works before reassembling your headlights or tail lights.

If you purchased LED Resistors to solve the problem of hyperblinking, please refer to the Resistor Installation video on our website, diodedynamics.com/install

If you purchased a flasher to solve the problem of hyperblink, turn on your hazard lights and follow the clicking noise until you find the source under your dash. Unplug that factory flasher, and replace it with the new LED flasher.

 

FOG LIGHT / DRL LEDS

First, you will need to access the factory bulb. Look in your owner's manual for information on changing the bulb.

When you have the factory fog light bulb uninstalled, simply plug in the new bulb. Depending on the size of the bulb, the fitment may be tight, as LEDs are usually slightly larger than their stock replacements.

Be sure to check to make sure it works before reassembling your vehicle. If the bulb does not work, you may have an issue with polarity. Please try the same bulb on the other side, and contact us with the results.

If you purchased LED Resistors to solve the problem of bulb out warning, please refer to the Resistor Installation video on our website, diodedynamics.com/install. If you purchased plug-and-play resistors, simply plug one end into the factory socket, and connect the other end to the LED bulb and install as normal.

 

TROUBLESHOOTING

If your LEDs do not work when you try to turn them on, please first re-read the guide and make sure everything is properly connected. Be sure to adjust the pins on the bulbs whenever possible, to make sure that the bulbs are being properly powered in the socket.

 If the LEDs are still not working, please visit our Troubleshooter on our website. This troubleshooter will walk you through steps in order to resolve any problems you may be experiencing. We are very sorry for the trouble, but we will do everything we can to help you get everything working as soon as possible.

Worry-free warranty

  • - Full 3-year warranty on all products
  • - No waiting: we usually send new items out with a return label (US customers only)

 

You will get quick help from our trained staff for any issues.

All Off-Road Lighting also carry a limited lifetime warranty.

For further details, please see our full article.

Domestic (US) Customers

  • - Just $5 per order with our Diode Delivers program
  • - Same-day shipping for all orders placed by 12:00 PM CST (or until 4 PM with rush processing)
  • - USPS, for delivery in 2-4 days (on average)
  • - Express services are available, see exact pricing at checkout
  • - Fully Insured

 

International Customers

  • - We ship to all countries via standard mail
  • - Usually around $10 for LEDs, or $25 for HIDs.
  • - Choose your service on checkout to see exact prices:
  • - USPS 1st Class: 2-5 weeks
  • - USPS Priority: 1-2 weeks
  • - Express EMS: 1 week
  • - Please email us if you are unsure about shipping to your country.


You will receive updates from our site when your order is shipped, along with a unique shipment number to ensure that your order is correctly accounted for. This allows you to easily reply to us if you have any concerns.

Whether your order is big or small, it is tested through many run cycles, and each bulb is tested before shipment. Every single bulb. Every time. And if anything does go wrong, you can rely on our industry-leading warranty for worry-free replacement.

If you're not happy with your items, we want to make it right. So we have some pretty awesome return policies:

Returns

30 day return policy. All customers have 30 days from the date of original order shipment to return items.

Full refund, no fees. At Diode Dynamics, we offer free returns. That means no restocking fees, no administrative fees, and no hassle!

 Free return label. If your original order was over $50, you get a free return label for your items (US customers only). If your order was less than $50 or international, you can send the items back through your preferred method.

Exchanges

Within 30 days: If your original order was over $50, you can get new items shipped to you with a return label (US customers only). If your order was less than $50 or international, we can send you the new items first, but you are responsible for returning the old items.

Within 90 days: Any item can be returned for exchange or store credit within 90 days. The buyer is responsible for the cost of the return shipping, and must first return the old items. We'll still cover the postage for the new items.

 

Please note: due to the nature of custom acrylic pieces, we cannot offer any refund or exchange for returned custom acrylic items.

 

To make a return or exchange, please request an RMA, or give us a call. When we get it back, you will be notified and credited appropriately.

Again, all returns must be approved, with an RMA. This is so that we can process your return as quickly as possible when we get it. If you would like to return an item, please Request an RMA. Please include as much information as possible about the reason for return.

Alternatively, you can also send us a message, or give us a call!